Network adapter upgrade for hp a4308f

I want advise as to how to upgrade the network adapter for my hp a4308f which has 10/100 adapter.  can this be upgraded to 150 or greater to allow download speeds faster than 100?  I have Verizon FIOS service and cannot get download speed over 100.
if so, what hardware upgrade is available for my hp model a4308f?
thanks for assistance!

Hi:
Get a PCI gigabit ethernet adapter for it.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=-1&IsNodeId=1&Description=10%2F100%2F100...
Or get an external USB gigabit ethernet adapter for it.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=-1&isNodeId=1&Des...
Paul

Similar Messages

  • Could not find network adapter needed for registration

    Cisco IP Communicator has worked well for a month now. One morning I go to launch the app and I get the error message: Could not find network adapter needed for registration. I rebooted my pc and I got the same result. I reinstalled the app and got the same results. I don't know what if anything changed, but I know I can't even get the application to load to look at any settings. PLEASE HELP!!!
    Brian C

    Hi Brian,
    Have a look at this good thread :)
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc0bb6f
    Hope this helps!
    Rob

  • Network adapter diver for t43

    Hello guys!
    i reformated my hard drive and lost a Network adapter diver for t43.
    WHERE CAN I FIND Network adapter diver for t43 TIN ORDER CONNET TO AN INTERNET?
    Please advise
    Solved!
    Go to Solution.

    Hello,
    You did not mention the Type (model) of ThinkPad T43 you have or which operating system you installed on it, but I believe most—if not all—ThinkPad T43s have a Broadcom BCM57xx NetXtreme series Gigabit Ethernet network interface card in them.  If that is the case with your ThinkPad, than the latest drivers are located here on Broadcom's support web site.  If none of those work, try looking at the device drivers on this page of Lenovo's support web site.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • GX60 1AC-021US - Network adapter upgrade

    Hi all!
    I've tried the search function before posting here, but didn't have any result. So here's my question!
    I've bought an Intel Wireless-AC adapter to replace the Qualcomm Atheros adapter that comes pre-installed with the laptop. The thing is, after I uninstalled every drivers, format my system to re-install OS, it seems like the network adapter isn't working, giving me the "No network found" message while I'm accessing the connection nearby. I've tested an Ubuntu live CD and the adapter seems to work just fine. Is there anyway to make it works with Windows? I've tried the latest drivers from Intel, both for Win8 or Win8.1 and the previous version of the driver too, without success. The card worked 1 time, but after reboot, the same problem re-occured.
    Any idea or advice I can get?
    Thanks!

    Quote from: darkhawk on 22-January-14, 10:31:49
    Well....a quick google turns up these:
    https://communities.intel.com/thread/45592
    http://www.sevenforums.com/bsod-help-support/303338-frequent-bsod-problem-3.html
    How many sticks of memory do you have in your laptop? 2 or 3?
    Just wondering.....
    Lastly, I saw your posts on Techinferno (I don't frequent there as much as I used to....). Honestly, the Killer Networks cards are just as much problems as many others. Go look at the GE/GT series users having a mess of a time with drivers with those cards. My GT70 took about 6 months until I got drivers that were BSoD free. Imagine that?
    The best thing I can say, is I believe a few users 'upgraded' to the Intel 6235 and had good experience once they got the drivers sorted out.
    http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6235.html
    I don't have thread links atm (the search function isn't working right...), but they are here in this forum. You might have to go back 5 or 10 pages to find it, but it's there.
    I have 2 RAM sticks, default. The only thing I tried to upgrade on the laptop is the network adapter...
    Yeah, I've read almost all thread related to the card. Seems I'm not the only having trouble with that card, and since I installed the card myself, the people over at Intel won't offer me that much support. Anyway, I asked them and they sent me to the infos related to install latest drivers or try windows drivers. Nothing fits. I'll still look at that and if nothing good comes out, then I'll just be done with the card...  Thanks for your help!

  • How many physical Network Adapter required for to implement NVGRE Gateway ?

    Hello Guys,
    Would like to know how many physical Network Adapter required to implement network virtualization including the technologies such as Windows Azure Pack| system center 2012 R2 & Hyper-V 2012 R2.
    Thanks 
    NM-BG

    A quick search of TechNet will turn up all sorts of step-by-step and overviews and blogs with lots of information about how to configure and setup.  Minimum of two.  Actual configurations may vary according to business needs and requirements.
    . : | : . : | : . tim

  • WAAS Inline Network Adapter Required for 674 Appliance Inline Mode?

    Is an Inline Network Adpater required to setup a WAAS 674 Appliance in Inline Interception Mode or can the two inbuilt interfaces Gi1/0 anf Gi2/0 be used?

    Hi,
    You definitely need an Inline Adapter to setup WAAS 674 for inline interception mode. The built in Gig interfaces cannot be used for inline interception but can be used for WCCP or PBR. Inline adapter comes in a group LAN port and a WAN port.
    Regards
    Kiran.

  • Wifi adapter upgrade for hp pavilion g6-1d73us

    I have an HP Pavilion g6-1d73us running Windows 7 Home Premium with Intel Core i3 2.30GHz, 4GB RAM, 64 bit OS and would like to upgrade my wifi adapter from wireless 802.11n to wireless 802.11ac so I can also change my modem & router to the new, faster standard. The current wifi adapter that I have is Realtek RTL8188CE 802.11 b/g/n wifi adapter. I have researched the hardware on the internet and I think I would like an Intel Wireless AC 7260 wifi adapter but I am not sure if it is compatible with my laptop. Could you please tell me what wireless 802.11ac card or adapter is compatible with my laptop or if I am even able to upgrade this compnent. My computer runs fine and has no problems. Thanks.
    This question was solved.
    View Solution.

    No. Sorry. The HP laptop motherboard has a BIOS program that is set to stop the bootup process if any but very specific wireless cards is installed. In the case of your laptop, no 802.11ac adapter is on the "whitelist" to allow booting. 
    Do not shoot the messenger. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Unable to install Network Adapter Driver for Windows Server 2012

    Hi,
    We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
    Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
    Please help us to get it working.
    Thanks,
    Ronak Shah

    It is not working as the system is having Intel® 82579V Gigabit Network Card
    I guess, it's not supported on windows server 2012
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
    NOTE: The following devices do not have driver or software support for Windows Server
    2008 R2:
     - Intel® 82566MC Gigabit Network Connection
     - Intel® 82566MM Gigabit Network Connection
     - Intel® 82567LF Gigabit Network Connection
     - Intel® 82567V Gigabit Network Connection
     - Intel® 82577LC Gigabit Network Connection
     - Intel® 82579V Gigabit Network Connection
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here, are my own.
    This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Blog |
    Wiki

  • Is Intel 3945 network adapter suitable for 50Mbit/s?

    Hi,
    Today i installed a modem from Ziggo (Netherlands). My internet speed is now 50Mbit/s download.
    On my laptop A200-1CN PSAECA my wireless download speed is max 20Mbit. Now i think the networkadapter of my laptop is not suitable for this speed. Could anyone confirm this?
    Can this networkadapter be replaced by a faster one? By myself or only at Toshiba service-centre?
    Awaiting your reply.
    Thanks in advance and best regards,
    Paul

    Your notebook is delivered with Intel 3945ABG WLAN cards. Support networks are 802.11a/g. So in g mode you should have this speed, even higher than that.
    But the WLAN speed depends on many different factors:
    Which kind of DSL package do you have?
    Is the right WLAN mode set in router and in WLAN card properties?
    Maybe is data source overloaded and you cannot use this speed for download.
    Generally speaking your notebook should not have problems with this WLAN speed but other factors are very important too.

  • Network adapter speed for CIMC?

    Im having some issues with data being feed into a CIMC server.. (COBRAS import, mass amounts of SMTP connections, etc) I noticed the prior engineer set the network speed on the CIMC virtual server connected to a 3750G switch to 1000 Full.  Should this be set to Auto on both ends or is 1000 Full the recommended setting?   My expierence in the past with UC products is to set anyting for 1000 to Auto and let it run on its own.  If its 100, then 100 full.
    Thoughts?
    Thanks!

    There is a bug with the negociation speed of the CIMC on C-Series. Bug ID CSCtj80604.
    For now it's recommended to lock it to 1000.
    Regards,
    Robert

  • Windows 7 network adapter drivers for hp 2000 2b-19wm, help ditching Linux....

    need drivers for windows 7. the links for older posts went bad yesterday, due to a change in support website. cant get online for updates. fresh install of 7 from new software dvd, legal coa. heres the deal, friend of mine wanted me to try out Linux. So he installed KUBUNTU. I found out that support was not offered for linux based PCs for the software I want to run. the hardware manufacturer insists on windows or mac and will not support linux, ever... so I found a copy of 7, all legal, and want to roll back to windows. it had 8 on it when i bought the notebook used, and has the official windows 8 hologram sticker on the bottom, no coa.its an AMD platform, 4gb ram, 300 GB hddwant to run Presonus Artist 2 software, using a Presonus Audiobox 2x2 USB interface.

    Hi: See if this driver works... This package contains the driver installation package for the Qualcomm Atheros AR9000 Series wireless LAN Controller in the supported notebook models running a supported operating system. File name: sp63802.exe

  • HP Envy lost network adapter

    I think I have accidentally uninstalled the network adapter driver for my laptop. At the moment, it says that there are no network connections, but the internet connection for my phone is just fine. The driver does not seem to be anywhere on my laptop, and I have no disc (I'm pretty certain it didn't come with one, as it has no optical drive).
    Please could you tell me how I can reinstall this driver when my laptop has no internet connection?
    This question was solved.
    View Solution.

    Hi
    Try to install the drivers from the link give below from network and see if this fixes your issue.
    http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-x2-11/5296226/model/5330111#Z7_3054ICK0KGTE3...
    In case if this doe snot work you may try performing a system restore to the date where unoit was working fine.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Can't open TCP connection when two network adapter are enabled

    Hi all, 
    I've an applicaiton that connect using "TCP Open Connection". The applicaiton is running on a computer have two network adapters configured to be on two different network.
    When I start the application, if both network adapters are enabled, connection is not created (timeout). When I disable the network adapter which is not configured for the network I need, connection is succesfull.
    - How can I choose which adapter to use to open the connection, as LabView seems enable to select the good one.
    - Or I can I disable a network adapter (just for the connection time) 
    I'm using LabView 8.5 Full on Windows XP.
    Thanks for your help

    This is generally a routing issue. The OS will route connections to your primary network if it is not a direct route. For example, one network is 10.3.4.x (primary network) and the other is 192.168.1.x.with a subnet of 255.255.255.0. Now, let's say you want to reach a device with an 192.168.2.x address. The OS will try to route this through the primary network but is has no route to reach the 192.168.2.x subnet. Therefore your connection fails. You can add a permanent route to your computer to force specific address ranges to specific NICs. Use the ROUTE ADD command which is part of the OS. If you are trying to reach the computer using a name instead of the IP address the issue is basically the same but a but more challenging to resolve. The OS will do th elookup on your defined DNS servers. They generally do not have knowledge of local private networks and therefore can't resolve the name. In this case you need to create a more involved network infrastructure to update the name server. Probably not something that is feasible to do.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • How can I set ne2000 network adapter in Solaris 8 for x86

    I am a beginner. I can not set a ne2000 compatible network adapter(isa) in Solaris 8 for x86.
    I do follows:
    write the file ' /kernel/drv/nei.conf ' with ' name="nei" parent="isa" reg=0x1,0x0300,0x1f interrupts=10 '
    and use the command: drvconfig -i nei --failed
    use the command: drv_add -i nei; devlinks; --there is no the command drv_add
    use the command: touch /reconfigure; reboot
    after reboot, use the command: ifconfig nei0 plumb --failed
    Did I miss something obvious, or what driver should I use?

    After backing up the suspect hard drive, I ran Disk Repair on it and found no problems. Then ran Disk Warrior again and no problems. It is a Hitachi, btw.
    As for the PrefPane issue: Repairing disk permissions on the main volume and on the partition that holds the system did not make any difference.
    Reinstalled the 10.5.8 upgrade, performed safe start and then repaired permissions again. Still getting a blank PrefPane for network.
    Next step is to try and trash the System Configuration plist and Network Interfaces plist.

  • Thunderbolt Network Adapter not working after yosemite upgrade

    After I upgraded to Yosemite, my MBP Retina 13" doesn't see the link on thunderbolt network adapter. The wireless is totally unreliable and freeze every few min for 1-2 min which is long enough to disconnect any sessions. Turn off and on of wireless works and recovers but it's royal pain. Any suggestions?
    I scheduled call with Apple 3 times today. They call me back at the scheduled time and immediately tell me that I missed their call even though I pickup on 1st ring. Been waiting in their support queue for more than 30 min now and no one is on line yet.

    the link provide above leads to  http://plugable.com/2014/10/31/os-x-10-10-yosemite-ethernet-adapter-problems-we- can-help
    ...but these seem to be all 3rd party USB ethernet adapters and nothing to do with the Thunderbolt adapter of the thread - or am I missing something?
    I have the same blooming problem, it seems to be totally hit and miss whether the adapter works or not. 
    I thought is was a faulty adapter, so even bought a second one for my MacBook Pro, so a bit more profit for the most profitable company in the world for a non working device.  My ethernet cable works fine to an old apple USB adapter but is 90% useless with Thunderbolt.
    Renewing the DHCP lease occasionally works, but totally unreliable, at the moment it fails.
    Still looking for a reliable solution.
    Come on Apple, please sort this out, you have a connector policy of turning everything you can into adapters and dongles rather than building them in, so you end up with a slim laptop and a bag of adapters to carry around, and then when they don't  even work - doubly annoying.

Maybe you are looking for