Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

I was unable to find my plabook in the network or any mounted volume when I connect w8x64 pro to the playbook via usb cable despite the blackberry device manager is loaded on connection
in devce mgmt I found
Device Type: Network Adapters
Manufacturer: Research In Motion
location: 0000.001d.0007.005.000.000.000.000.000
Device Status:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
------------------- Events Tab--------::
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_c255bed1a35b762a\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_e3f4ab2c803293ee\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver version: 2.0.0.32
Itried to update the device but it's up to date
what Can I do?

hi Suman Shrestha,
Welcome to the Lenovo Forums.
Your issue might be similar to this thread.
Although this is for a Windows 7 machine, can you try the solution that was posted and see if the problem gets fixed.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

VN7-791G bluetooth devices not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

MACBOOK USB device not working in WIndows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

Please try the above procedure first as mentioned by SilentFlyer. If that does not work then highlight My Computer and Right Click on mouse. On the menu that pops up Choose Properties. Click on the Hardware tab and then Device Manager. Scroll all the way down to Universal Serial Bus Controllers. Click on the little plus sign to the left to open the sub-components. Does any one of them have a yellow exclamaation mark? That indicates that something is not functional. Please let us know what you see there.
Axel F.

MACBOOK USB Devices not working in Windows XP

My MACBOOK USB devices is working fine in leopard OS(10.5.1) but in windows XP professional the USB Devices is not working after I did dual boot.Please help how would I fix the problem.
Thanks
Mike

This forum is for troubleshooting the usage of OS X, not Boot Camp for Windows.
You'll want to repost your question in the Boot Camp discussions:
http://discussions.apple.com/category.jspa?categoryID=237

Wifi not working under windows 8.1 with Bootcamp

Hi, I have installed windows 8.1 under bootcamp. it seems to work fine however the wifi connaction is not existing under windows. therefore i can only connect via ethernet. Anyone an idea how to solve it? Thx

Hey there,
I don't know if it's still interesting for you, but I've had the exact same issues. The only solution, as far as there is no official change from Apple, you can install Windows 8.0 via Bootcamp with official drivers for Bootcamp (wifi works great) and then install the upgrade to 8.1 as Windows still uses the former installed drivers from Win 8 on 8.1 as well.
Hope that helped, 8.1 runs even better on my MB Air than Mac OS 10.9 :/

Macbook does not recognize iphone 5s when connected using usb cable that came with charger

I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
Does any one have any solution for the problem

iOS: Device not recognized in iTunes for Mac OS X
BTW, this is the Mac Pro desktop forum

Blackberry z30 - not showing the mobile when connected with blackberry link

sir ,
first when i bought the mobile z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected with i tbut it doesnt get connected to the mobile device...
please provide me solution.. so that i could get my mobile to old gud condition
waiting for the reply , thanks in advance,

trishul22g wrote:
sir ,
first when i bought the mobile z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected with i tbut it doesnt get connected to the mobile device...
please provide me solution.. so that i could get my mobile to old gud condition
waiting for the reply , thanks in advance,
Sorry to respond that your post is vague.
Did you do a reset to factory? It takes a day or a few days for a BB10 device to finish sync'ing and indexing and so forth after a wipe or an OS reinstall or upgrade. If performance is subpar, give it another day to see if it improves.
On the last, I may not understand. I believe you are saying you are connecting to the device with Link and the computer mounts the microSD card as a drive but not the device's onboard memory. Do you have mass storage mode enabled? If so, disable mass storage mode and try again.
- Ira

I pod not recognised when used with usb cable

I have recentley bought a new computer, which has no firewire port ( which i had used to connect my ipod classic 40gbto my old computer without any issues. However I have purchased a usb connection cable to use with the new computer and neither windows or I tunes will recognise that i connect my ipod. I simply get a message saying usb device malfunctioned,windows does not recognise it. Although the ipod will still connect to my old computer with the firewirecable it will not connect with the usb either, any help would be greatly recieved as I have tried resetting and disk mode to no avail.

I have to say I have the same exact problem. It may sometimes be solved by putting the ipod into Disk mode before plugging it or by changing the ipod drive letter. In my case nothing have worked though, so if anyone has other ideas please tell me.

My iPad is not recognize in iTunes when connected with usb

I wonder if someone have a solution, I connected my ipad to a new macbookpro and it is not detected in iTunes. any idea why

http://support.apple.com/kb/TS1591

HT1476 4s does not seem to respond when plugging with USB adapter

I've had my 4s for about 3 months and suddenly yesterday it wouldn't recognize when plugging in the adapter to charge it. I don't think that I'm having a battery issue but more of an issue w/ the sensors recognizing the adapter. Has anyone else had this issue?

Perform a hard reset and see if it fixes the issue.

I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Blckberry Storm Does not Work on Windows 7 64 Bit Nor on Outlook 2010

Well I have been trying to get this @*** thing working for the last @*## week. My Dell was fried by a power spike. The Blackberry was in my pocket well away from the power spike. My current configuration is:
Windows 7 Home Premium
Acer Aspire 7540
4 GB of Memory 64 Bit Operating System
Blackberry Storm 9530, Platform Version 4.2.0.179, Application Version 5.0.0.419
1. I have installed the latest version of the Desktop Software via downloiad.
2. I spent most of today with tech support from Telus.
3. Neither MSS or MTP will work. We have installed and reinstalled all of the software atleast 3 or 4 times.
4. The Windows troubleshooter knows there is a problem and fails. It says (really helpful). USB Mass Storage Device has a driver problem. It also tries to install the MTP driver and fails. What is strange is that there is some communication going on between the Blackberry and the PC.
5. I can not get anything off the Blackberry (photos etc.).
6. The Blackberry does not work with Outlook 2010.
How can RIM possibly stay competitve when they can not even support the two largest platorms out there (Windows 7 64 bit and Outlook 2010). This is a symptom of massive problems for the future of this company.
I can not talk to RIM. They want me to talk to Telus. Telus says there is nothing they can do. I basically have a Blackberry that is little more than a simple phone. If the @#*# thing did not cost so much I would just pitch it and get an iPhone.

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

SoundBlaster 5.1 not working in Windows 7

)SoundBlaster 5. not working in Windows 7E Hello all, I installed a SoundBlaster 5. VX sound card into my system: A Fujitsu-Siemens Celsius M430, 3.4 GHz Intel processor, 2GB of RAM and a fresh installation of Windows 7 Ultimate (retail version). I initially tried to use the drivers provided on the product CD, which during installation gave me a bluescreen. After reboot, I downloaded the latest drivers for Windows 7 from the CLE website. But still, the drivers seem to not install correctly - I get a message that the SB 5. VX is ready for use, but the speaker symbol still shows a red cross and when I click on it, Windows suggests me to re-install the drivers, which gives me the same results even after rebooting. In the Device Manager, the device has a yellow exclamation mark besides it. Additonally, I may mention that the onboard sound device is a SoundMax onboard system, which I now have disabled. Anyhow, the SounbdBlaster is recognized by CLE AutoUpdate software (but needs no update according to the mesages). I'm a bit thrown up, did anybody encounter the same problems or have a solution yet? Cheers Dennis

I have a subwoofer and 5 speakers (2 for front, 2 for rear, 1 for center)...Philips MMS460 5.1. Connection to the on-board RealTek HD Audio is simple, orange for the subwoofer, green for front and black for rear.I have already tried downloading the latest drivers from the motherboard manufacturers website,I have tried connecting the subwoofer connectors to different jacks (reversed black and green).
I have experimented with the settings in the RealTek HD Audio Manager and Control Panel->Sound windows. Nothing works.
These exact same subwoofer and speakers worked perfectly fine in vISTA Home basic
1. Disconnect the speaker system from the pc rear audio panel
2. Remove the on-board audio using the "Add or Remove Hardware" option in Control Panel
3. Reboot the pc, install the driver. Re-connect the speaker system.
4. Using the Sound applet found in Control Panel, configure the speakers for surround sound
5. Reboot the pc.
And now resume all of that ...i have been on Realtek hd audio manager->Speaker configuration set on 5.1 making the test ...EVERITHING WORKS FINE but ...finally when i open for example WINAMP AND PLAY A SONG ....is only played on front *or stereo..So on what im wrong?

Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

Similar Messages

Maybe you are looking for