Network Administrator Reset

I just had a new hard drive installed after losing all of my data. My network is still running fine, however, neither computer in my house has the ability to become network administrator (I know the PW but I cannot bring up/mount the attached hard drive)
I am hoping that there is an easier way besides resetting my network to fix this. Thanks in advance for your help.

Microh5 wrote:
neither computer in my house has the ability to become network administrator
Please explain exactly what you mean by that. Have you tried to put AirPort Utility into "manual setup" mode with your AirPort Extreme?

Similar Messages

  • Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where i am not a network  administrator. All helps for this issue instruct turning off the router/other stuff that i cant access.Suggestions?

    Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...

    Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.

  • The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

    Hi,
    When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
    "The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
    If this problem persists, contact your network administrator."
    It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
    But it is working in Firefox.
    Please help me on how to fix this issue.
    Thanks.

    Hi Htet,
    Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
    http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
    http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
    http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
    Thanks
    Daniel Yang
    TechNet Community Support

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    Hello, Toro Silva. 
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • When I try to connect to wi-fi, it asks for the password, but I got this question.  If you don't know the password, check with the Wi-Fi network administrator, but I don't know how.

    Hi All, 
    When I try to connect to wi-fi, it asks for a password.  Then I got this question.  If you don't know the password, check with the Wi-Fi network administrator, but how do I find the network administrator.

    Whomever provides the wi-fi.
    To what wi-fi network are trying to connect?

  • Proxy server is refusing connections to specific websites suggesting I contact my network administrator about proxy settings.

    I don't have a network administrator. The computer I am using used to be networked where I worked, but I am no longer working there and they gave me the computer.

    hi Kmiranda2, please to set-up firefox to directly connect to the internet ('no proxy') in the firefox ''menu ≡ > options > advanced > network > connection - settings...''
    [[Firefox can't load websites but other browsers can]]

  • Network connection reset error

    I am struggling to effect any software updates or downloands.  I get a "network connection reset" error.  I have failed to update iPhone software, even YouTube videos seem to hang at about the 50% mark.  I do not have anti-virus and have inserted new DNS info.  It makes no difference if I use Airport or Ethernet cable.  Have uninstalled and rteinstalled iTunes.  Am at a loss. Help please!

    I even uninstalled Trusteer banking security software....
    Did you use the developers uninstaller to ensure you fully eradicated it from your system. Trusteer's Rapport has a bad reputation on here for mucking things up. Here's a quick search of just these forums:
    https://discussions.apple.com/community/desktop_computers/search.jspa?peopleEnab led=true&userID=&containerType=&container=&spotlight=false&q=Trusteer
    Also, just to rule out the fireall possibility, have you tried turning off the firewall and testing?
    Edit: You don't have anti-virus installed, but do you have anything such as Little Snitch or Peer Guardian running?

  • Mac wakes up for Ethernet network administrator access, goes to sleep again

    I'm running Mac OS X 10.4.6 on an iMac G5, and the OS is set up such that it presents a login prompt after the Mac is witched on from standby mode. If one does not start to type in a password, the machine goes back into standby mode after a dozen seconds or so, which is helpful e.g. in case I have hit the keyboard by accident.
    However, there are situations when I don't want this to happen. For instance, I own a SqueezeBox v5 device, which will wake also the Mac when I turn it on via its remote control (I assume via "Wake for Ethernet network administrator access"). However, since I do type on the Mac keyboard in this case, but use the Squeezebox remote control instead, the Mac decides to turn itself off again. I'm also facing this with utilities that try to wake up my Mac at a certain time to perform their functions (e.g. with Audio Hijack Pro).
    So my question is, is there any way to tell Mac OS X not to fall back into standby mode when woken up by another mechanism than normal keyboard typing, via some configuration file or similar. Turning off the keyword prompt entirely is not a tolerable option for me in this case.
    Thanks for any help on this,
    Christian
    iMac G5 Mac OS X (10.4.6)
      Mac OS X (10.4.3)  

    The 'wake for ethernet network administrator access' does not mean 'wake on any old ethernet traffic you like'.
    In other words you can't just try to hit any service you choose - if the machine is asleep then it doesn't even have an IP address that's going to listen to your hit.
    How it works is via a special broadcast protocol sent from another machine on the LAN. The packet is sent to the machine's hardware MAC address (and therefore doesn't need any services to be running on the machine). When the hardware detects the packet it wakes up the machine.
    There are a few utilities that will send the relevant packets to wake a machine. Apple Remote Desktop has it, but so do free utilities like WakeOnLAN.

  • Network service reset - Internet browser stop while working

    Dear All,
    I am using previou version of mac os but currenlty I am using Mac OS X 10.6.8 but after upgrade I have face one problem that every time my network service reset. When I work in Safari or Mozilla (any web broswer) but suddnly internet stop after I refresh the page than again browser is working. this happend many time in a day so it is stop my work and I distrub while working.
    any one has same probelm or any one has a solution so please show me how I can resolved the issue in mac os x 10.6.8
    Thanks
    Pulkit

    Hi and Welcome to the Forums!
    Even though two steps are redundant, I suggest the following steps (in order, waiting for success of each before proceeding to the next):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then it sadly remains up to your carrier to resolve as they are the ones who deliver your services to you...
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT2712 Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network  administrator,  but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 addr

    Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network  administrator,  but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 address. Help plz

    Hmmm, is Network set to using DHCP?
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
    Instead of joining your network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

    Software: Microsoft Office 2007 Professional Plus
    Service: Microsoft Office 365 - Cloud Hosted
    Hello,
    I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
    The following recipient(s) cannot be reached:
          Megan Bennis on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Charity Lurk on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Susan Parker on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
    All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
    I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
    - This entailed manually downloading/updating  the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
    repopulate when you open Outlook again. This also did not resolve my issue.
    Any ideas? Thanks in advance!

    That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

  • HT4972 When trying to download IOS 6 in itunes there is an error at the end saying network was reset. Any ideas?

    IOS 6 update will not download, it gets right to the end then starts saying that the "network was reset" . Any ideas ?

    Hi shelleymb,
    If you are having issues downloading a song in iTunes such as you describe I would suggest using the steps in this article to troubleshoot -
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Network Administrator

    Network Magic is always telling me I can't change things because I'm not the network administrator. I am too! I'm listed as the administrator on this PC, in fact I'm the only person who uses it. Where does the problem lie? With this PC? In the router?

    Lee,
    Yes, you sure can. It's not recommended or anywhere near a best practice, but you can uplink a server to the 10GB port after setting it up as a switchport.
    Cliff

Maybe you are looking for