Network Alerts

Network Magic v5.5 is reporting 3 network alerts. All 4 pertain to security and identify that I am not running a anti virus, anti spyware, or a firewall. All three are currently on through Kaspersky. I have verified that they are running. I am using Windows 7. I have done a fresh install of Network Magic, I have rebooted the PC and re-performed the scan on the network alert page. Any suggestions?

It may be a change to the program that prevents NM from detecting it. This issue normally has t be fixed in an update so hopefully one is coming that will fix this.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

Error on Network alert

Hi,
When i navigate through /sapapo/pov1 for the product view and click the network alert each time i click on the network alert icon the alert message gets increment, but through /sapapo/rrp3 it is not so. What could be the reason for network alert increment.

Go to Mail's Accounts preference pane and delete the iCloud account. Close Mail, reopen and add the iCloud account back.

Generate voice call on reception of network alert

Hello All,
We have multiple networks monitoring tools Cisco & non Cisco including Prime Infra...
We have the following requirement and don't know if it is easilly doable.
We've tried some tools available out there but the result was not very good.
We want to generate calls (we have a full Cisco UC network) on reception of networks alerts.
Is there any way/trick of doing it ?
If anyone has tried something like this and wants to share, that would be really helpfull.
Regards

I have this exact issue and yes, if I have my 3G off I can make calls - don't need to re-try even once. As soon as I turn it on again, it might take me 10-15 redials until I get connected!!!

Network alert symbol.

Suddenly this morning, I have an exclamation mark in a yellow triangle over my network icon in my task bar. I only have one computer, so I shouldn't need a network. How do I remove the alert symbol?

Hello acabuzzy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with your network having a network alert symbol and not working correctly. I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Unbreakable Linux Network Alert Icon - How to register?

Hi,
I just installed the Unbreakable Linux and when tried to use the up2date I get a message requesting to active my environment but I don't have a CSI as I'm an Oracle employee. Does anyone know how can I make it work?
Thanks
Claudio

Hello John,
I tried to subscribe to Unbreakable Linux Network with my company's CSI supplied to us through our Oracle partnership; I work for an Oracle Certified Advantage Partner. I have used my CSI for MetaLink registration and Service Requests, but it is not working when I try to register for "up2date" (error: "CSI is not valid").
Should my company's CSI work?
Thanks,
Jeremy

Firmware 2.0.2 Ramifications: "Unable to Join Network"

It seems like ever since I put 2.0.2 on my 3G iPhone WiFi problems have suddenly entered the picture. I'm usually connected to my home WiFi network via a Belkin N1 Vision router. Ever since the 2.0.2 upgrade the WiFi connection gets repeatedly dropped/blocked. What I mean by that is that when I wake my phone up to use it, it doesn't connect to what was previously a working WiFi connection. When I dig into the available WiFi networks list and select my home network I get the "Unable to join network" alert. My only recourse is to restart the router.
This happens multiple times a day and it's bugging the crap out of me. Is anyone else experiencing this behavior? More to the point, does anyone have a solution short of continually restarting the router?

Rohan Thompson,
Have you tried resetting network settings on the iPhone yet? To do so, just navigate to Settings > General > Reset > Reset Network Settings.
If the issue persists beyond that, I would recommend restoring the iPhone and setting it up as a new phone. More information on that can be found here: http://support.apple.com/kb/HT1414
Hope this helps,
Raleigh

Turning Off Join WiFi Network

Is there anyway to turn off the join wifi network alerts, that come everytime I want to go on the internet, or I start up my iPhone and to Safari? I never can join any of them, anyway. It's annoying to always get this window, and it's intrusive when you are trying to do something else. Thanks for any help.

Hi bpahi,
Welcome to the Palm forums! The Palm Pre should connect to an Airport access point; however, there are some things you need to check.
First, what version of the Airport do you have? Is it the Apple Airport Extreme? If so, check the settings on the Airport. This access point supports 802.11n which is a mode that the Pre is not compatible with. You need to enable 802.11g for your Pre to connect to it.
Also, I think you mean 802.11x (802.1x is a security system that is commonly used in Enterprise wireless networks and very rarely used in home configurations). The most common versions of home Wi-Fi networks are 802.11b, 802.11g, and 802.11n. Of those, only 802.11b and 802.11g are supported by the Pre.

Inserting a Row to a Specific Position in a Sorted JTable

Hello,
I am currently writing an application that will be a network alerting tool. Periodically it will query a database, and if alerts are found, display them on a JTable for a user to see. However, my problem is the following. If the user sorts the table by a column, new alerts are entering the table in their sorted position. This could cause the table to rearrange and be confusing to the user, also causing them to possibly miss alerts. So, what I would like to happen is that new alerts get inserted at the top of the table, while all previous alerts will stay in their sorted order. For example, say alerts received in the order D A C B . The user then sorts the table, so that the alerts are now in the order A B C D. If alert E comes in, I want the table to show as E A B C D. Then, if the user sorts again, the table would become A B C D E, and so on.
I have attempted multiple ways to achieve this. My most recent being using the table.setRowSorter(null), inserting into the model, and then re-enabling sorting. However, switching to null appears to make all the rows go back to their previously unsorted position. Any help would be greatly appreciated as to what I am missing.

You can implement your own RowSorter, such that rows that have been added since the latest explicit sort are ranked first (override RowSorter.rowsInserted() to know them).
You'll have to override methods convertRowIndexToModel(int) and convertRowIndexToView(int) . This is easy if you used the rowsInserted() events to, e.g., maintain one atrribute latestUnsortedRow.

Answer for the Interview Questions

Hello Experts,
Below is the list of questions from DP and SNP which I took it from APO Interview Questions thread. Please provide us the answers for the questions. It will be really helpful for the beginners like me. If every one in the forum contributes then it will be very great.
Thanks for your reply.
Best Regards,
Raj.
Where do you define Info-objects?
Info-objects comprise of?
What is Administrator Workbench is used to create and manage?
What are the different types of data in liveCache?
what is the difference between Storage Bucket Profile and Planning Bucket Profile?
How can you setup two grids in the Planning Book / Data View?
What can be sources of data in the timeseries keyfigure?
What is the use of ex-post forecast in Univariate Statistical Forecasting?
What are the types of Keyfigure aggregation in terms of characteristics/Calc Type?
What are the types of Keyfigure aggregation in terms of time?
Where do you maintain keyfigure aggregation?
What are aggregates?
What is the difference between planning characteristic and navigational attribute?
What are selection profiles used for?
What are the different ways of creating CVCs?
How many levels does a macro have?
What are the different types of standard macros?
When is the exit and default macro executed?
What is process chain and how is it used in Demand Planning?
what is an Infospoke? Where do you find the configuration in BW Admin Workbench?
what is the basis of creation of planning books and data views considering background job performance?
Where do you set the level at which a DP background job activity has to execute?
How can you setup custom alert types for DP and SNP?
what is the difference between Dynamic and Database alerts?
Where are database alerts stored (table name)?
What is realignment and explain the process?
What is cannibalization group?
What are the different forecast error measures and which is most preferred?
What are the different types of keyfigures you can use in a Planning Book?
What is planning version and planning area initialisation?
What is the master data in APO Demand Planning?
what is meant by Release of Demand Plan to SNP?
How do you create proportional factors? What is the standard keyfigure for Proportional Factor?
1. What is the difference between order series and time series data. How does different types of transaction data get mapped to Interactive Planning keyfigures?
2. What are the different methods of doing Supply Network Planning namely Heuristic, Optimiser, Multi-Level Demand Supply Match (CTM)?
3. What are aggregates and how are they used in SNP.
4. What is SNP Stock Transfer Horizon? What is the relation with Planning Time Fence?
5. What is SNP Horizon? What is the relation with PPDS Horizon?
6. What is the key difference in planning with SNP vs PPDS?
7. What is the master data required for planning in SNP?
8. How are SNP Plans different from PPDs Plans.
9. How can capacity constraints considered in SNP.
10. What are Quota Arrangements and how are they used?
11. How do you get forecast in SNP? What is forecast consumption?
12. How does the different transaction data aggregate and show up in different keyfigures in Interactive SNP?
13. What are the different types of SNP Heuristics possible?
14. What are the different Safety Stock calculation methods that can be sued in SNP?
15. What is Netting and Forecast Consumption? Explain Backward and Forward Consumption?
16. Are requirements and receipts in SNP pegged? How is it different from PPDS?
17. What is the relationship between SNP Horizon and PPDS Horizon?
18. Briefly describe the different ways of managing safety stock in SNP
19. What is the difference between a model and a version
20. In what scenario Capable-to-Match is applicable.
21. Briefly explain how SNP optimiser can be setup and used.

Dear Raj,
you can go through the following questions and answers which will help you.
How can a planning version be frozen and unfrozen?
A Planning Version can be frozen and unfrozen using Function Module /SAPAPO/TS_PAREA_VERSIO_FREEZE so that no further changes to the planning version can be done.
What is Release Profile?
Release Profile is used to release timeseries data from DP to SNP/PPDS. You need to define the DP Planning Area and timeseries keyfigure the data in which is released and the SNP Category Type (typically FA) to which data is released. You may maintain a Daily Buckets Profile it will define the number of working days (working days determined based on Shipping Calendar maintained for the location master) starting on and from the From Date if released online/ interactively or that many workdays of the planning horizon when release is carried out in background. The Period Split (blank, 1 and 2) field in the SNP2 tab of location-product master determines how demand plan is released to SNP from DP (how bucketed data is disaggregated to the workdays).
What is the usage of Period Factor?
Period Factor maintained in the SNP PPM or Transportation Lane determines the Availability Date of a Receipt element within a time bucket (period). The system determines the exact availability date/time of the receipt elements within a period, by adding a time interval (that it gets by multiplying the period factor with the period length) to the start time of the period. You can enter a factor between 0 and 1, where 0 is the start of the period, 0.5 the middle, and 1 the end of the period. When calculating the availability date/time, the system takes into consideration all weekdays, meaning that it does not take into consideration any days that have been defined as non-workdays in the calendars.
Period Factor used is .71 = 7x0.71 = 4.97 or 5 days from ptimizer of weekly bucket resulting in a Friday.
If Period Factor is not maintained in PPM or Transportation Lane then the User Period Factor indicator and the Period Factor value maintained in the Lot Size tab of the location-product combination is used. If this is not maintained a default value of 0.5 is used.
What determines stock categories displayed in Stock on Hand keyfigure?
The categories defined in Category Group ST1 (can be maintained in table /SAPAPO/APOCGC) determine the stock categories that are displayed in the Initial bucket in the Stock on Hand keyfigure. Subsequent buckets are dynamically computed.
Does dynamic alerts show up in Alert Monitor?
Dynamic Alerts do not show up in the stand-alone alert monitor. Network alerts are to show pegging relationships.
What is the report to execute MASSD?
The report for executing MassD in background job is MASSBACK.
What is the shortcut to change location type in APO?
Report /SAPAPO/CHECK_LOCATION_TYPE can be used to change location type (say from 1001 to 1002 or vice-versa) of existing locations in APO. The table to refer is /SAPAPO/LOCMAP. SAP does not recommend this process.
How can a transaction be executed even when no authorization?
SE93 - Transaction code for Transaction Code E.g. CRC1 Create Resource has txn code CRAH. So if you do not have authorization to create resource you can use SE93 and enter txn CRAH and then Test F8 button to go to the txn.
How to copy a Process Chain?
To copy a process chain to another process chain, goto the Process Chain you want to copy and then type copy in the tool tar and hit enter. It will allow you to copy the Process Chain to another Process Chain that can be modified as per user's requirement, saved, activated and used.
What is the process to copy planning versions in R/3?
Use OLIX to first delete previous MRP planning versions. Then use MCB& to create the new MRP planning versions by choosing the appropriate version you want to create as ICO Version. The info structure in this case is S094.
How to use create planning book with two tables?
To use two tables on one screen of Planning Book/Data View - select indicator next to second page title and give name. Additional tab page is displayed in Planning Book Maintenance wizard to define the keyfigures for the second table.
What is Master Data in DP?
Master Data in Demand Planning primarily is Charcateristic Value Combinations commonly termed CVCs. CVCs are the planning combinations against which data is stored in keyfigures.
What is the behaviour of Procurement Type X?
Procurement Type X - source selection is based on matching due date then priority then cost. If both In-house Production and External Procuremnet is possible then In-house Production (PPM) is chosen as source of supply.
What is PPDS Fixing Horizon?
PP/DS fixing Horizon defines the PP/DS time Fence - within that period if heuristic is run no orders get changed.
What is the reuse mode in Product Heuristic?
Reuse mode in Product Heuristic - makes the system to reuse orders already present in the heuristic run i.e. orders are not deleted and recreated.
What is Planning Procedure?
Planning Procedure in Product Master (PP/DS) defines that when you convert a planned order to process order it is in Deallocated state and not Scheduled state and more.
Award me if helpful
Regards
Srikanth

How to call session bean's method in JSP

Hi All,
I am working on a JSF web application by using sun studio creator.
The first page have a button, the onClick javascript is as following, which bring up a alert box showing user login name.
In JSP file, how can I call session bean's setUserName(String name) function (which I would like to store this UserName). So the following pages can use this information.
If I can not do it this way, is there any other way to do it?
Thanks in advance.
var net = new ActiveXObject("wscript.network");
alert(net.UserName);
In managed-beans.xml
<managed-bean>
<managed-bean-name>BasicInfo</managed-bean-name>
<managed-bean-class>treepractice.BasicInfo</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>

You can find more information/details/examples at their own website.
On the other hand, do you realize that that ActiveX stuff is IE proprietary? And that it is a browser configuration whether to allow them or not? And that this configuration is in IE7 defaulted to an (annoying) warning box before execution which is just bad for the user experience?
With other words, forget that ActiveX garbage. Alternatives are Applets (not recommended) or Java Web Start (recommended).

Okay, so I'm a little slow.

<Alert> nothing to do with java networking </Alert>
Umm, I just now noticed that I was no longer 'watching' the old Sun/Oracle java network forum since the end of September and eventually found my way here. Did I miss something? Last I saw was a message from Oracle, back in March, that we would be 'transitioned' into their system, but I had to create a whole new account here and basically start over as a newly registered, first-time poster, to this forum.
Is that how it is supposed to work?
Thanks,
Kev

An email was supposed to have gone out to everybody, or maybe everybody that had made 15 posts in the last year or something like that. It explained the transition and how if you signed up on Oracle using the same email address as on Sun by Sep. 10, then your account would be migrated.
I'm active on here pretty much every day, so I saw the discussions on the site about it. I never got the email though.
So either you weren't active enough to warrant an email, or you just didn't get one for the same error that prevented others and me from getting it.

Antivirus update for uninstalled AV

Hi, this is a minor problem, but it's quite annoying with Pure Networks Network Magic program.
Network Alerts keeps telling me that my Antivirus updates are available. When I go to fix the alert, (I know I can ignore it, but i just want to get rid of it at this point) - I go to fix the network issue, and then it gives me a link to Launch Norton Internet Security 2006.
I uninstalled Norton over a year ago.
How can I change the settings so that Network Magic doesn't detect Norton? - This network alert issue just came up recently. I installed Network Magic back last Sept (v 10.2.8216.0) - and this network alert issue never came up until a few months ago.
System Specs:
win xp MCE

Hi, what anti virus program are using currently, and what version of NM are you using?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Switched support from Redhat to Oracle

I have successfully switched my support from Redhat to Oracle and my system does appear in ULN after login. However, when I start "up2date" on my system it does not show any channels, Redhat or Oracle. Shouldn't the Oracle channels now appear after switching?
Here is my command line confirmation:
$ up2date --show-channels
el4_i386_latest
$
How do I get up2date to see the Oracle channels?

While the up2date initial window did not show any channels, clicking Next did start the update process. The first update installed kernel updates and rebooted the system. Running up2date again installed the remaining available updates. Rebooting a second time now shows Oracle Linux instead of Red Hat.
After completing all available updates, the up2date program fails to start. Running from the Applications menu System Tools>Unbreakable Lunix Network Alert Icon I get the following errors.
Exception type OpenSSL.SSL.Error
Exception Handler Information
Traceback (most recent call last):
File "/usr/share/rhn/rhn_applet/rhn_applet.py", line 521, in refresh
self.model.refresh(force)
File "/usr/share/rhn/rhn_applet/rhn_applet_model.py", line 457, in refresh
source.refresh(force)
File "/usr/share/rhn/rhn_applet/rhn_applet_source.py", line 35, in refresh
self._do_refresh()
File "/usr/share/rhn/rhn_applet/rhn_applet_rpc.py", line 212, in dorefresh
status = server.applet.poll_status()
File "/usr/lib/python2.3/xmlrpclib.py", line 1029, in __call__
return self.__send(self.__name, args)
File "/usr/lib/python2.3/site-packages/rhn/rpclib.py", line 319, in _request
request, verbose=self._verbose)
File "/usr/lib/python2.3/site-packages/rhn/transports.py", line 168, in request
headers, fd = req.send_http(host, handler)
File "/usr/lib/python2.3/site-packages/rhn/transports.py", line 696, in send_http
headers=self.headers)
File "/usr/lib/python2.3/httplib.py", line 718, in request
self._send_request(method, url, body, headers)
File "/usr/lib/python2.3/httplib.py", line 739, in sendrequest
self.endheaders()
File "/usr/lib/python2.3/httplib.py", line 712, in endheaders
self._send_output()
File "/usr/lib/python2.3/httplib.py", line 597, in sendoutput
self.send(msg)
File "/usr/lib/python2.3/httplib.py", line 576, in send
self.sock.sendall(str)
File "/usr/lib/python2.3/site-packages/rhn/SSL.py", line 201, in write
sent = self._connection.send(data)
Error: [('SSL routines', 'SSL3_GET_SERVER_CERTIFICATE', 'certificate verify failed')]
Does anyone know what the problem could be?

Alert Parameters to Get Interface Description (i.e. Something Meaningful to Network Admins)

Hi All,
We have recently deployed OpsMgr 2012 R2 inparallel to our legacy 2007 environment.
For network device monitoring in the 2007 environment we used the xSNMP Management Pack on top-of the native capabilities.
On of the positive aspects of the 2007 set-up was that we were able to leverage the xSNMP Management Packs ability to expose the interface alias/description which our Network admins populate to identify the connection/purpose of an interface within the SMS
Channel format.
Basically, the Network Admins would give me a list of critical interfaces and using the combination of Path and Alias/Description I would be able to confidently enable interface monitoring and alerting for those interfaces.
In 2012, however, all that has been changed. Now, interfaces are identified by an Interface Name value that is not really meaningful or relevant to the way our Network Admins work. Wjat I also find problematic is the way that interfaces seem
to have been divorced from the the source device in such a way that the default email alert format doesn't even include the Path (source device) on which the interface generating the alert is associated with. This is even the case when trying to create
a custom monitored interfaces State view in that the Path column is populated by the MAC address rather than with the host device that the interface is on which is what really matters. Who deals in MAC addresses?
What we require is a way to expose the host device and Interface Description and Alias values as part of an SMS/email alert as that is crucial information that an on-call engineer being woken-up at 2:00 AM needs to know rather than scratching
their head with some guff about IF-20 without even the parent device of that interface given so that they can at least know what device to log-on to manually try and identify which interface connection/service is down even though they should not have
to do that.
I have already tried to customize the SMS Channel format from its default format to the following:
State: $Data[Default='Not Present']/Context/DataItem/ResolutionStateName$ $Data/Context/DataItem/ManagedEntityFullName$ $Data/Context/DataItem/AlertName$
using the list of alert parameters from Kevin Holman's blog but even with the $Data/Context/DataItem/ManagedEntityFullName parameter the information is not satisfactory.
For all the improvement in SNMP and network monitoring it seems that something that was actually good and useful in 2007 has now been lost because of the way interfaces/ports have been divorced from the parent Managed Network Node device.
Can anyone advise how I might be able to get sensible interface alerts in my email and SMS notifications that provide the host router/switch Display Name, and the Interface Description and Alias of the Interface?
Points given to all considered replies.
Kind Regards,
Michael

Yeah, that's kind of a mess...
You can create a workaround to change the name similar like that:
http://www.vroege.biz/?p=746
But it needs some authoring knowledge and must run every time after a network discovery. Since this means a class property change it is a performance consuming workflow and should not run top often.
HTH, Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Need to send a email alert in PI 7.1 to user outside the intranet network

Hi,
How can I forward an alert from my alert inbox to a thirdparty user through email? Thirdparty user belongs to different network.

Hi Arindam,
One of the solution to your problem is as mentioned below.
1) Use RFC lookup in your mapping. Tell ABAP person to create a RFC for mail triggering. Or you can use standard RFC from ABAP for mail sending.
2) Once the value(Mail ID) will come in Message mapping, call the RFC lookup which will intern call the Mail sending RFC.
3) This way mail will be triggered from XI and will be sent from the ABAP system where the RFC is located. Just check whether in ABAP SMTP is there so you can send mail to external ID.

Network Alerts

Similar Messages

Maybe you are looking for