Network analysis tool

Hi,
We are facing some problems on our Datacanter but it is very hard to determine it is related to server or network device. We are looking for a software or appliance that collects all or part of the traffic with SPAN and analyse the traffic. Do you suggest anything for this?

I think that depends on how large is your datacenter, what traffic rates have to be considered and what your budget is.
We have ~8000 logical servers and many hosts with 10Gig nics in our DC .We use the Opnet AppResponse Xpert (formerly known as ACE live) and we are happy with that. It's an appliance with several 10Gig nics and a good (and complex) analysing software.

Similar Messages

Netflow analysis tool

Hi,
what is the best available tool for netflow monitoring and specially for troubleshooting issues using flow analysis? I am looking for something that works well on small network of 200 devices.
Thanks

Easy enough to request a quote from both companies but from what I've seen, PRTG will be less cost. Its Netflow capability is simple but then it also does lots of other things - querying and graphing anything your can get with SNMP.
Scrutinizer is a purpose built tool for flow analysis. It costs a bit more but gives you a lot more functionality if flow analysis is what you need to do. It won't also serve as your general purpose network management tool however. PRTG can do that.
Both tools have trial downloads to try before you buy.

Network Management tool

I am looking for a network monitoring tool that will provide me bandwidth analysis (incoming and outgoing traffic), latency, availability and anythign else that could be useful to understand how the network is doing. I know that there are a lot of costly tools out there but there are also free ones, that is what I am looking for. A tool that is easy to install, manage and use.
Any recommendations?

installation of Cacti itself is pretty easy on my opinion, on my personal experience other supportive applications was a little bit difficult since I am not expert on those area. if you have some experience or some one else able to help you with installation of (apache,mysql,php) you can accomplished your goal easily. also you can get help from cacti user forum. I am used this document as base of my installation and tweak a little bit based on my need.
once you installed cacti is very easy to manage and power full. currently I am using cacti to monitor more than 6000 interfaces from 200 different locations. if you have question down the road with installation, I will try my best to help you.

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Issues configuring network-ups-tools with Powerware 5110

Been using Arch for about 24hrs now (It replaced RHEL5 which was running for 18mths) and I'm very impressed. Have found it very good for a new user, the extensive wiki's have been a huge help to get things going. Under RHEL I really needed to do a lot of google searching to get things working but have only had to do it twice for the same build under Arch. I was able to fix the first issue (wTorrent wiki missed install of php-sqlite) and now network-ups-tools.
I had it working 100% under RHEL so its not a device/hardware issue that I can see. But under Arch I keep getting connection lost messages after starting the ups daemon.
System can see a USB device
[root@fiorano ~]# lsusb
Bus 005 Device 002: ID 0592:0002 Powerware Corp. UPS (X-Slot)
[root@fiorano ~]# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root nut 189, 513 Jan 3 16:44 /dev/bus/usb/005/002
Config files:
# nut.conf
MODE = standalone
# ups.conf
[myups]
driver = bcmxcp_usb
port = auto
desc = "Powerwave 5110"
# upsd.conf
no changes
# upsd.users
[monmaster]
password = 1
allowfrom = localhost
upsmon master
instcmds = ALL
# upsmon.conf
DEADTIME 15
FINALDELAY 5
HOSTSYNC 15
MINSUPPLIES 1
MONITOR myups@localhost 1 monmaster 1 master
NOCOMMWARNTIME 300
POLLFREQ 5
POLLFREQALERT 5
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
SHUTDOWNCMD "/sbin/shutdown -h +0"
# upssched.conf
CMDSCRIPT /usr/local/ups/bin/upssched-cmd
# /etc/udev/rules.d/52-nut-usbups.rules
# various models - bcmxcp_usb
SYSFS{idVendor}=="0592", SYSFS{idProduct}=="0002", MODE="664", GROUP="nut"
I can communicate with the UPS and the process is being performed by the nut user so udev rules file is ok
[root@fiorano ups]# bcmxcp_usb -D -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
debug level is '1'
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
nut 1608 0.0 0.0 1800 788 pts/0 S+ 17:09 0:00 bcmxcp_usb -D -a myups
This time with more debug data....
[root@fiorano ups]# bcmxcp_usb -DDDDD -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
send_to_all: SETINFO driver.parameter.port "auto"
debug level is '5'
send_to_all: SETINFO ups.firmware "Cont:00.50 Inve:01.50"
send_to_all: SETINFO ups.power.nominal "700"
send_to_all: SETINFO output.phases "1"
send_to_all: SETINFO ups.model "POWERWARE UPS 700VA"
Length of meter map: 92
Index Offset Format NUT
0027 0000 51 output.frequency
0028 0004 51 input.frequency
0033 0008 51 battery.voltage
0041 0012 f0 None
0043 0016 f0 battery.charge.low
0047 0020 f0 None
0056 0024 f0 input.voltage
0065 0028 51 output.current
0068 0032 51 output.current.nominal
0078 0036 f0 output.voltage
Length of alarm map: 24
Index Alarm Supported
-001 INVERTER_AC_OVER_VOLTAGE No
-001 INVERTER_AC_UNDER_VOLTAGE No
-001 INVERTER_OVER_OR_UNDER_FREQ No
-001 BYPASS_AC_OVER_VOLTAGE No
-001 BYPASS_AC_UNDER_VOLTAGE No
-001 BYPASS_OVER_OR_UNDER_FREQ No
0000 INPUT_AC_OVER_VOLTAGE Yes
0001 INPUT_AC_UNDER_VOLTAGE Yes
0002 INPUT_UNDER_OR_OVER_FREQ Yes
-001 OUTPUT_OVER_VOLTAGE No
-001 OUTPUT_UNDER_VOLTAGE No
-001 OUTPUT_UNDER_OR_OVER_FREQ No
-001 REMOTE_EMERGENCY_PWR_OFF No
-001 REMOTE_GO_TO_BYPASS No
-001 BUILDING_ALARM_6 No
-001 BUILDING_ALARM_5 No
-001 BUILDING_ALARM_4 No
-001 BUILDING_ALARM_3 No
-001 BUILDING_ALARM_2 No
-001 BUILDING_ALARM_1 No
-001 STATIC_SWITCH_OVER_TEMP No
-001 CHARGER_OVER_TEMP No
-001 CHARGER_LOGIC_PWR_FAIL No
-001 CHARGER_OVER_VOLTAGE_OR_CURRENT No
-001 INVERTER_OVER_TEMP No
0003 OUTPUT_OVERLOAD Yes
-001 RECTIFIER_INPUT_OVER_CURRENT No
-001 INVERTER_OUTPUT_OVER_CURRENT No
-001 DC_LINK_OVER_VOLTAGE No
-001 DC_LINK_UNDER_VOLTAGE No
-001 RECTIFIER_FAILED No
-001 INVERTER_FAULT No
-001 BATTERY_CONNECTOR_FAIL No
-001 BYPASS_BREAKER_FAIL No
-001 CHARGER_FAIL No
-001 RAMP_UP_FAILED No
-001 STATIC_SWITCH_FAILED No
-001 ANALOG_AD_REF_FAIL No
-001 BYPASS_UNCALIBRATED No
-001 RECTIFIER_UNCALIBRATED No
-001 OUTPUT_UNCALIBRATED No
-001 INVERTER_UNCALIBRATED No
-001 DC_VOLT_UNCALIBRATED No
-001 OUTPUT_CURRENT_UNCALIBRATED No
-001 RECTIFIER_CURRENT_UNCALIBRATED No
-001 BATTERY_CURRENT_UNCALIBRATED No
-001 INVERTER_ON_OFF_STAT_FAIL No
-001 BATTERY_CURRENT_LIMIT No
-001 INVERTER_STARTUP_FAIL No
-001 ANALOG_BOARD_AD_STAT_FAIL No
-001 OUTPUT_CURRENT_OVER_100 No
-001 BATTERY_GROUND_FAULT No
-001 WAITING_FOR_CHARGER_SYNC No
-001 NV_RAM_FAIL No
-001 ANALOG_BOARD_AD_TIMEOUT No
0004 SHUTDOWN_IMMINENT Yes
0005 BATTERY_LOW Yes
0006 UTILITY_FAIL Yes
0007 OUTPUT_SHORT_CIRCUIT Yes
0008 UTILITY_NOT_PRESENT Yes
-001 FULL_TIME_CHARGING No
-001 FAST_BYPASS_COMMAND No
-001 AD_ERROR No
-001 INTERNAL_COM_FAIL No
-001 RECTIFIER_SELFTEST_FAIL No
-001 RECTIFIER_EEPROM_FAIL No
-001 RECTIFIER_EPROM_FAIL No
-001 INPUT_LINE_VOLTAGE_LOSS No
-001 BATTERY_DC_OVER_VOLTAGE No
-001 POWER_SUPPLY_OVER_TEMP No
-001 POWER_SUPPLY_FAIL No
-001 POWER_SUPPLY_5V_FAIL No
-001 POWER_SUPPLY_12V_FAIL No
-001 HEATSINK_OVER_TEMP No
-001 HEATSINK_TEMP_SENSOR_FAIL No
-001 RECTIFIER_CURRENT_OVER_125 No
-001 RECTIFIER_FAULT_INTERRUPT_FAIL No
-001 RECTIFIER_POWER_CAPASITOR_FAIL No
-001 INVERTER_PROGRAM_STACK_ERROR No
-001 INVERTER_BOARD_SELFTEST_FAIL No
-001 INVERTER_AD_SELFTEST_FAIL No
-001 INVERTER_RAM_SELFTEST_FAIL No
-001 NV_MEMORY_CHECKSUM_FAIL No
-001 PROGRAM_CHECKSUM_FAIL No
-001 INVERTER_CPU_SELFTEST_FAIL No
-001 NETWORK_NOT_RESPONDING No
-001 FRONT_PANEL_SELFTEST_FAIL No
-001 NODE_EEPROM_VERIFICATION_ERROR No
-001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No
-001 OUTPUT_DC_OVER_VOLTAGE No
-001 INPUT_PHASE_ROTATION_ERROR No
-001 INVERTER_RAMP_UP_TEST_FAILED No
-001 INVERTER_OFF_COMMAND No
-001 INVERTER_ON_COMMAND No
-001 TO_BYPASS_COMMAND No
-001 FROM_BYPASS_COMMAND No
-001 AUTO_MODE_COMMAND No
-001 EMERGENCY_SHUTDOWN_COMMAND No
-001 SETUP_SWITCH_OPEN No
-001 INVERTER_OVER_VOLT_INT No
-001 INVERTER_UNDER_VOLT_INT No
-001 ABSOLUTE_DCOV_ACOV No
-001 PHASE_A_CURRENT_LIMIT No
-001 PHASE_B_CURRENT_LIMIT No
-001 PHASE_C_CURRENT_LIMIT No
-001 BYPASS_NOT_AVAILABLE No
-001 RECTIFIER_BREAKER_OPEN No
-001 BATTERY_CONTACTOR_OPEN No
-001 INVERTER_CONTACTOR_OPEN No
-001 BYPASS_BREAKER_OPEN No
-001 INV_BOARD_ACOV_INT_TEST_FAIL No
-001 INVERTER_OVER_TEMP_TRIP No
-001 INV_BOARD_ACUV_INT_TEST_FAIL No
-001 INVERTER_VOLTAGE_FEEDBACK_ERROR No
-001 DC_UNDER_VOLTAGE_TIMEOUT No
-001 AC_UNDER_VOLTAGE_TIMEOUT No
-001 DC_UNDER_VOLTAGE_WHILE_CHARGE No
-001 INVERTER_VOLTAGE_BIAS_ERROR No
-001 RECTIFIER_PHASE_ROTATION No
-001 BYPASS_PHASER_ROTATION No
-001 SYSTEM_INTERFACE_BOARD_FAIL No
-001 PARALLEL_BOARD_FAIL No
-001 LOST_LOAD_SHARING_PHASE_A No
-001 LOST_LOAD_SHARING_PHASE_B No
-001 LOST_LOAD_SHARING_PHASE_C No
-001 DC_OVER_VOLTAGE_TIMEOUT No
-001 BATTERY_TOTALLY_DISCHARGED No
-001 INVERTER_PHASE_BIAS_ERROR No
-001 INVERTER_VOLTAGE_BIAS_ERROR_2 No
-001 DC_LINK_BLEED_COMPLETE No
-001 LARGE_CHARGER_INPUT_CURRENT No
-001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
-001 LOSS_OF_REDUNDANCY No
-001 LOSS_OF_SYNC_BUS No
-001 RECTIFIER_BREAKER_SHUNT_TRIP No
-001 LOSS_OF_CHARGER_SYNC No
-001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No
-001 OUTPUT_BREAKER_OPEN No
-001 CONTROL_POWER_ON No
-001 INVERTER_ON No
-001 CHARGER_ON No
-001 BYPASS_ON No
-001 BYPASS_POWER_LOSS No
-001 ON_MANUAL_BYPASS No
-001 BYPASS_MANUAL_TURN_OFF No
-001 INVERTER_BLEEDING_DC_LINK_VOLT No
-001 CPU_ISR_ERROR No
-001 SYSTEM_ISR_RESTART No
-001 PARALLEL_DC No
-001 BATTERY_NEEDS_SERVICE No
-001 BATTERY_CHARGING No
-001 BATTERY_NOT_CHARGED No
-001 DISABLED_BATTERY_TIME No
-001 SERIES_7000_ENABLE No
-001 OTHER_UPS_ON No
-001 PARALLEL_INVERTER No
-001 UPS_IN_PARALLEL No
-001 OUTPUT_BREAKER_REALY_FAIL No
-001 CONTROL_POWER_OFF No
-001 LEVEL_2_OVERLOAD_PHASE_A No
-001 LEVEL_2_OVERLOAD_PHASE_B No
-001 LEVEL_2_OVERLOAD_PHASE_C No
-001 LEVEL_3_OVERLOAD_PHASE_A No
-001 LEVEL_3_OVERLOAD_PHASE_B No
-001 LEVEL_3_OVERLOAD_PHASE_C No
-001 LEVEL_4_OVERLOAD_PHASE_A No
-001 LEVEL_4_OVERLOAD_PHASE_B No
-001 LEVEL_4_OVERLOAD_PHASE_C No
0009 UPS_ON_BATTERY Yes
-001 UPS_ON_BYPASS No
-001 LOAD_DUMPED No
-001 LOAD_ON_INVERTER No
-001 UPS_ON_COMMAND No
-001 UPS_OFF_COMMAND No
-001 LOW_BATTERY_SHUTDOWN No
-001 AUTO_ON_ENABLED No
-001 SOFTWARE_INCOMPABILITY_DETECTED No
-001 INVERTER_TEMP_SENSOR_FAILED No
-001 DC_START_OCCURED No
-001 IN_PARALLEL_OPERATION No
-001 SYNCING_TO_BYPASS No
-001 RAMPING_UPS_UP No
-001 INVERTER_ON_DELAY No
-001 CHARGER_ON_DELAY No
-001 WAITING_FOR_UTIL_INPUT No
-001 CLOSE_BYPASS_BREAKER No
-001 TEMPORARY_BYPASS_OPERATION No
-001 SYNCING_TO_OUTPUT No
-001 BYPASS_FAILURE No
-001 AUTO_OFF_COMMAND_EXECUTED No
-001 AUTO_ON_COMMAND_EXECUTED No
0010 BATTERY_TEST_FAILED Yes
Lengt of Config_block: 64
Length of statistics map: 0
Lengt of command list: 22
Lengt of outlet_block: 0
Lengt of alarm_block: 11
send_to_all: SETINFO output.voltage.nominal "240"
send_to_all: SETINFO ups.serial ""
send_to_all: SETINFO input.voltage.nominal "240"
send_to_all: SETINFO input.frequency.nominal "50"
send_to_all: SETINFO input.frequency.low "45"
send_to_all: SETINFO input.frequency.high "55"
send_to_all: SETINFO input.transfer.boost.high "216"
send_to_all: SETINFO input.transfer.trim.low "260"
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
send_to_all: SETINFO ups.beeper.status "enabled"
send_to_all: SETINFO input.transfer.low "186"
send_to_all: SETINFO input.transfer.high "280"
send_to_all: SETINFO ambient.temperature.high "1"
send_to_all: ADDCMD shutdown.return
send_to_all: ADDCMD shutdown.stayoff
send_to_all: ADDCMD test.battery.start
send_to_all: SETINFO output.frequency " 49.9"
send_to_all: SETINFO input.frequency " 49.9"
send_to_all: SETINFO battery.voltage " 13.5"
send_to_all: SETINFO battery.charge.low "11"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.current " 0.3"
send_to_all: SETINFO output.current.nominal " 1.8"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO ups.load " 16.7"
send_to_all: SETINFO ups.status "OL"
send_to_all: DATAOK
dstate_init: sock /var/state/ups/bcmxcp_usb-myups open on fd 5
send_to_all: SETINFO driver.version "2.4.1"
send_to_all: SETINFO driver.version.internal "0.21"
send_to_all: SETINFO driver.name "bcmxcp_usb"
send_to_all: SETINFO driver.parameter.pollinterval "2"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
send_to_all: SETINFO battery.voltage " 13.7"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
^CSignal 2: exiting
But starting the daemon and things fail...
:: Starting UPSd Daemon [DONE]
[root@fiorano ups]#
Broadcast message from nut (Sun Jan 3 17:24:55 2010):
Communications with UPS myups@localhost lost
Broadcast message from nut (Sun Jan 3 17:25:00 2010):
UPS myups@localhost is unavailable
Here are my daemon and message logs, showing a comms issue with the UPS but I am using the exact same settings as my previous OS build?
[root@fiorano ~]# tail -f /var/log/messages.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:24:55 fiorano wall[1739]: wall: user nut broadcasted 1 lines (46 chars)
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:00 fiorano wall[1742]: wall: user nut broadcasted 1 lines (36 chars)
[root@fiorano ~]# tail -f /var/log/daemon.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsd[1731]: not listening on ::1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:25:00 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:05 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:10 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:15 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Hopefully someone can point me in the right direction to get this fixed. I did not install any packages manually, everything has been done via pacman (system is fully up to date as per the time of this post.)

R00KIE wrote:I think you should make it 775
Didn't help.
R00KIE wrote:Can you post the script you call in /etc/rc.d to start/stop/restart the service? Maybe someone can spot a problem there.
Sure, it was put there by the package retrieved from the default repo by pacman as was everything else. All I did was modify a few files in /etc/ups so all user/permissions etc should be setup correctly by the package?
[root@fiorano ~]# less /etc/rc.d/upsd
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
PID=`pidof -o %PPID /usr/sbin/upsd`
case "$1" in
start)
stat_busy "Starting UPSd Daemon"
/usr/bin/upsdrvctl start &> /dev/null
[ -z "$PID" ] && /usr/sbin/upsd &>/dev/null
/usr/sbin/upsmon &>/dev/null
if [ $? -gt 0 ]; then
stat_fail
else
add_daemon upsd
stat_done
fi
stop)
stat_busy "Stopping UPSd Daemon"
/usr/bin/upsdrvctl stop &> /dev/null
/usr/sbin/upsmon -c stop &> /dev/null
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon upsd
stat_done
fi
restart)
$0 stop
sleep 3
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
R00KIE wrote:Maybe someone more experienced in debugging these kind of problems can help, I'm all out of ideas now.
Hopefully someone else stops by, but really appreciate your help. I'm sure its something small that I'm overlooking!
R00KIE wrote:forget about your config files for a moment and try something different and check if it works
Things is, NUT is fairly simple to begin with, there is really only 3 items you need to get it to work that I can see. The UPS driver, upsd user and monitor line.

Tax Analysis Tool | Report | SAP B1 | Localisation India

I don't know why this thread is not displayed same as I have typed in
Hi Solution Development Team,
I guess you are aware of the poor status of legal reports offered by SBO in country india version (I am aware of merging of A,B,C in new version 8.8).
I fore see if a Tax Analysis tool / Report provided same on the line of Sales Analysis already available at present, then it can be of great help to customer in following ways.
1. In India the frequency of changes in Legal tax structure is veri high, so even if all the as of date reports are developed then it can change any time.
2. The proposed solution can be suggested as work around to customers/users.
The desired tool/report should work as below
1st Input parameter screen should collect following information from user (you may add more)
1.a. From Tax Category
1.b. To Tax Category
1.c. From Tax Type
1.d. To Tax Type
1.e. From Tax code
1.f. To Tax code
1.2. Tax combination
1.3. Select From Date (Posting / Document)
1.4. Select To Date (Posting / Document)
1.5. Transaction category (Optional reference A/R Invoice Tax Tab)
1.6. Check Box ( Multiple choice A/R Invoice , A/P Invoice , A/P and A/R Credit Memo etc Marketing documents same as available in General Ledger report)
1.7. Radio Button (Summary OR Detailed)
Once user provides above details then in 2nd screen system should provide following data filterd based on criteria given in 1st screen
01. BP code and Name (Customer/Supplier)
02. Document Type
03 .Document No.
04. Document Date and Posting Date in separate columns
05. Item (multiple line for same document only in case of Detailed is selected in 1.7 above)
06. Tax Category (multiple line for same document only in case of Detailed is selected in 1.7 above)
07. Tax Type (multiple line for same document only in case of Detailed is selected in 1.7 above)
08. Tax Combination (multiple line for same document only in case of Detailed is selected in 1.7 above)
09. Tax Code (multiple line for same document only in case of Detailed is selected in 1.7 above)
10. Base Amount
11. Tax Percentage (depend upon the Tax code / Formulla)
12. Total Tax Amount (as per the choice made in 1.7 above - total document tax in case summary is selected)
13. Document Total as applicable
14. Transaction Category
15. BP Tax Info. Columns (VAT No. / Service Tax No. PAN No. etc all)
Also bring other columns which you find relavant, user should have option to make visible using form setting
The chalange I guess in this reporting/analysis is to display tax parameter code wise amount in column format which is stored in row format in system per item line (for reference see details displayed in link of A/R invoice Tax amount column).
Best Regards,
Samir Gandhi

No Body responded very strange !!!!!

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O.

ClassLoader Analysis Tool(CAT) doesn't seem to work with WL10.3

Hi,
I have an EJB running on WL10.3. It uses the Apache Commons Pool 1.6 jar to maintain a Pool of the other component sessions. We recently came to know that WL10.3 already has commons-pool.1.3 jar in its default classpath (module directory), so 1.6 jar is not being referenced at all. So we added META-INF\weblogic-application.xml and used the following setting as per the ClassLoader Analysis Tool(CAT) suggestion. We updated the deployment with this and cleared the cache, restarted, but still the CAT Tool's 'Analyze Conflicts' gives the same suggestion, implying that the changes didn't work. So not sure if this is the problem with the CAT Tool or with the following configuration.
<?xml version="1.0"?>
<weblogic-application xmlns="http://www.bea.com/ns/weblogic/90"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <application-param>
            <param-name>webapp.encoding.default</param-name>
            <param-value>UTF-8</param-value>
       </application-param>
       <prefer-application-packages>
            <package-name>org.apache.commons.*</package-name>
       </prefer-application-packages>
</weblogic-application>
Also, Is there any alternative to verify this change, I checked for commons-pool verbose option, so that we could see more details and track the class files. But I don't see any option available. Can anybody help ?
Thanks.

Did you build Elsa with this package from AUR: elsa-svn-arch
The way your elsa.conf looks like indicates to me that you have not.
Please use the package because you are also missing pam-files.

Mock RFP for SUN network management tool, desperate 4 help, just need specs

OK, I have a project that in essence is a mock Request for Proposal (RFP), I play as an intern, & our instructor roleplays the manager we need to convince. The different network management tools that were available were for example; HP Openview, Cisco Works, Sniffer....& I of course chose SunNet. We need to gather information on the tool, then turn around & design a relatively simple network from the specs that were given, & finally discuss how the management tool's abilities could benefit the (mock) company...power point presentation & all.
Here it is from the homework sheet given to us...."These products will need to be useful in a 5000 node network that has four main locations that are primarily Ethernet. There is a legacy 100 nodes of Token Ring attached to a mainframe. Cisco or Foundry routers connect the Four main locations, with swiches employed. Other connections to these sites are done via DSL or ISDN. Additional considerations are wireless communications, VOIP & Content delivery systems.
I know this is a lot & I'm not asking for someone to do all this for me, just simply provide any information you know about Enterprise management tools 2.0 or 3.0,or anything you may feel better suits my needs, as the links I have surfed about them give little to nothing about specifics that I need to make any argument. If you have any links send them...if you have anyting in hard copy I will pay for postage... I need to get this done & have little time as I go to school & work full time at Motorola (but only as a contractor), so I'm starting to choke & need help....any u can give is so very appreciated....& sorry to make this request a publishable novel here on the board, but thats what it is. Thanks again......Mark

A good solution. Liked it very much. Can you please make it a technet blog for others.
[email protected]

STATSPACK ANALYSIS TOOL

hi guys,
I need to analysis my statspack report of my own. Is there any free tool provided to analyse the report of my own.
TIA,

Hi,
You could take a look at a great set of statspack and AWR analysis tools here http://www.statsviewer.netfirms.com/
Cheers

Speedgrade crashes when showing the analysis tools.

I can make edits and changes to grades and effects just fine. But as soon as I click the arrow to open the analysis tools, the application crashes. This is extremely frustrating as I need the scopes to do anything in SG.
I have attempted to lower preview resolution, scopes resolution, GPU acceleration on and off. I have uninstalled twice.
Machine info:
Windows 7
amd fx 8350
32gb ram
2x GTX 770s SLI
Footage stored on internal SSD

Same here.
I can work all day in SG no problems. As soon as I click the arrow to bring up the scopes *crash*. This is post cleanup SOP.
AMD 3820 @ 3.5GHz
16GB RAM (11GB dedicated to Adobe)
Asus Nvidia GTX760-DC2 2GB
Win 8.1 (all updates current today)
Speedgrade 8.2x51 Native access (no hyperlink from PP)
GPU Acceleration enabled via CUDA
No plug-ins for SG or PP
Error log as follows:
Problem Event Name:
APPCRASH
Application Name:
SpeedGrade.exe
Application Version:
8.2.0.0
Application Timestamp:
54887476
Fault Module Name:
SpeedGrade.exe
Fault Module Version:
8.2.0.0
Fault Module Timestamp:
54887476
Exception Code:
c0000005
Exception Offset:
00000000003ee03f
OS Version:
6.3.9600.2.0.0.256.48
Locale ID:
1033
Additional Information 1:
d236
Additional Information 2:
d236bbe002996cedee0dde381fa38db4
Additional Information 3:
c93f
Additional Information 4:
c93ffbb2a38ecaab8d72a49f5c39cc59

Analysing tools for KM documents

Hello,
Does anybody know, if there are any analysing tools available, with which you can analyse the access of the KM documents. They should answer questions like
- when was the last access to a documents?
- which documents have an average rating lower than x?
- how often has the documents been accessed?
The purpose is, to identify documents, which may be obsolete...
Regards,
Dominik

Hi Dominik,
There is not tool but you can develop it.
You can develop a filter, each time that you access a document, this statistic information should be saved in a database and then you can report.
Here you have an example about how to create a report:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b30b090-0201-0010-829d-e988d093ac65
On the other hand,
Using taxonomies, you can classify document by rating.
Also in Content Management->Report->Resource Statistics (
This report calculates statistic information on the content of KM repositories
). I know that this report it is not that you are looking for but ....
Patricio.

Problem with 'restrict data' option in Web Analysis' Analysis Tool

I feel like i'm in the twilight zone.
We have made a report in web analysis, withh essbase as a source, and works fine.
We want to restrict data for customers that generate more than 1,000,000 revenue, for example
So, we go to Analysis tools, restrict data. The dialog window opens
We hit 'Select Column...' and nothing happens. No Column is shown, thus being unable to complete the dialog.
Should we enable something in essbase to allow this? We are newbies, but we think this should be pretty straightforward.
We have also tried to do that with the Analysis tools administrator, with the same result.
We are using Web Analysis 9.3.1.
Any feedback will be appreciated.
Thank you
Edited by: hectorsosar on 22/06/2009 02:31 PM

It got fixed by removing a filter from a dimension, and placing that dimension as a page.
Thanks,
Hector

What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10?

What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10?
I'm trying to debug a kernel panic under Solaris 10 on sparcv9. I tried the SUNWscat 4.1 package but it core dumps on Solaris 10. I found a blog entry that described the problem and mentioned a version 4.2 fix. That was from May 2006, but I have not found any update sense then. Was 4.2 ever released or is their an alternative tool for Solaris 10 that I can use?

One problem is that those of us who develop Solaris CAT do so as a "hobby" as it's not part of our actual jobs. But he good news is that management gave us the time to get a release out and 5.0 is now available here . We're now planning 6 month releases so we don't have a 5 year delay between updates.
BTW, the Solaris Crash Analysis Tool supports Solaris 10, OpenSolaris/Solaris Nevada, sparc, and x86/x64.
There are so many enhancements and bug fixes that I'd recommend reading the release notes (SUNWscat/docs/index.html).
-- Dana

Analysis Tool in Reader 9

I am unable to use te measure option in Analysis Tool of Adobe Reader 9. In View / Toolbar / More Tools there is a note saying that I have to activate the Document Rights to enable measuring tool.
It means nothing to me. Anybody can help me?

I have Acrobat Pro Extended (trial version for while) and I can't see the function that perform this operation. In Adobe Forum search I found references to Java, C# and .NET script to do so.
Thank you Aandi anyway.

Network analysis tool

Similar Messages

Maybe you are looking for