Network and administrative state under Solaris 10 1/06
Hi
I am mainly using zones to run web servers and I have the same zone configured on multiple machines so I can maunally failover a zone if one machine breaks.
However since upgrading to Solaris 10 1/06 it seems when a zone is booted into an administrative state it seems to bring up the network interface. This causes a problem when I add a package to one machine which has non running zones.
Am i correct in this belief and is there any way of stopping this behaviour?
Quick and dirty solution. The sun4v servers are the cool threads servers.
So if you know its coolthreads then the answer is easy.
If yor not sure. The coolthreads have lots of relatively slow CPU's.
The non cool threads have much fewer.
So set diag-switch? to true and do a reset-all.
If it claims to have 32+ CPU's then its sun4v. Otherwise its sun4u.
Alternatively, you can read the system handbook for your machine. But that might need a support contract. And wheres the fun in reading documentation.
Similar Messages
-
Windows 7 user account network and administration problem
Hello
I hope I am in the correct place and that my problem can be looked at, if not could I ask the moderator to move this post to the correct forum.
I have a very unusual problem that I hope can be resolved here.
I have 3 x Win 7 machines ( 2 x Pro and 1 x Ultimate ) all on my network but recently I tried to SFTP/SSH using winscp into one of them ( Pro ) only to find that access was denied – it took ages to find out why
– I finally noticed that the user name I created ( that has admin rights ) was not actually in the c:\Users\ folder what has happened is that all the files that should be in my created windows account are sitting in a folder called “user”which
is insidec:\Users\
I then created a folder that has the same user login nameI originally created, inside
c:\Users\
and copied all the files from the “user” folder and then tried to STFP/SSH into the original created user name but that did not work
I then tried this link
User Account - Hide using method 2 point 12, i.e adding (1) to the SpecialAccounts key, but that has not unhide my user account.
Using this cmd below
net user > Desktop\Users.txt
lists the users but I would expect to see i.e
Administrator ( followed by ) …. (created username)
What I am seeing however is below
Guest ( followed by ) …. (user)
When I use the command
lusrmgr.msc I see below :-
Name = user
Full name = my created windows login
Description = blank
I hope I can get some help here – I have cloned my disc in case of any mishaps but all I want to do is get my created win 7 user account working as it should, incidentally the login welcome screen appears on the
created account.Hello
MeipoXu
I think that I have managed to get into a better position since your last email above, but not quite where I need to be.
I have posted 3 jpg's
jpg key 501 = c:\Users\D&S
jpg key1000 = c:\Users\User
jpg winscp = my SFTP attempt to my problem machine
key 1000 = c:\Users\User .. everything I try to do will not get rid of this key.
However c:\Users\D&S finally appeared, and I was able to SFTP login using winscp only to find the root reports as c:\Users\user.
What I should see is c:\Users\D&S but I can only access c:\Users\User and not c:\Users\D&S
( Does that all make sense ? )
The other thing I noticed was that key 501
is normally reserved for the guest account c:\users\guest
But it has taken over c:\Users\D&S ... if you can get me past this then I will be extremely grateful
I need to see the root reported back as c:\Users\D&S not c:\Users\User
Turning to your post above and may I thank you for your help in trying to resolve this but before I proceed I need to be very clear about what you are suggesting I do.
Your Quote
Enable the built-in administrator account and login with it .To enable the built-in account:
net user administrator /active:yes
Q) Do I login with new the Admin account first then net user administrator /active:yes ?
Your Quote
Cut the whole folder and paste it to the Users folder , then navigate to the registry keys"ProfileImagePath" and change it to "c:\Users\account name".
Q) Cut and past which folder ? is it the folder c:\Users\D&S ? and where am I pasting it as "D&S" already exists in c:\Users\D&S .. I already created it and copied all the contents from "user" to "D&S"
Your Quote
Restart the machine and login with that account and then have a check.
Q) That bit must mean login with D&S
Your Quote
If the issue has gone ,please run "net user administrator /active:no" to disable the built-in account.Again
A) Got that bit :-)
Apologies for the above but I have found to my cost that if you assume what something means it can turn out to be mis understood and I could end up creating more trouble for myself
I will submit the winscp jpg separately as you can only submit 2 jpg's per message
Thank you -
why would it state under the "more about this mac" that i already have10.8.3 and then in the app store say i need to "resume" do you know what i mean? is it possible i already did download mountain lion entirely once? I am confused and don't want it twice
This is cause by the way the App Store checks to see if an application is installed on your system.
Basically when an app is installed it is in the Applications folder and this is where the MAS looks for them. So it looks at your purchase history for the apps you bought and looks in the Applications folder to see if they are installed. If an app is in your purchase history but not in the Applications folder the MAS says you need to install it.
For normal apps this works fine but the OS doesn;t install into the Applications folder. So the MAS sees you have Mountain Lion in your purchase history but it's not in the Applications folder and so it says you need to download it.
Hopefully one of these days Apple wil fix this.
regards -
I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
EMC Symmetrix Installation and Administration on Solaris
Hi,
Could anyone tell me where i can get good documents on Installation and administration of EMC Symmetrix devices with a volume manager on a Solaris box.
Thanks.On another note... is there a Sparc equivalent for the mod_wl_ohs.conf where we would place
<Location /<deployed app>>
SetHandler weblogic-handler
WebLogicHost <weblogichost>
WebLogicPort 7001
</Location>
It appears that this goes into the apache httpd.conf file, correct? Or does the mod_wl_ohs.conf equivalent exist?
We have just about completed everything in regard to being able to include a solaris host in our list of hosts that are tied to OAM. The webgate was created and software installed, the deployed app protected, etc... Everything that we have done for Linux and XP in the past we have done for this Sparc host.
When we try to access the Sparc's protected uri... nothing happens. The browser stays blank... the url does not change to display the oamsso login.html (as the other installs do)... nothing is returned... no error, no remarks, no logfile entries... just a blank browser. -
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
-
my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank
WiFi Troublshooting
iOS: Troubleshooting Wi-Fi networks and connections
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199 -
FWSM user and administrator multi-contexts authentication under ACS radius
Hi,
Im preparing the setup of an ACS radius server for FWSM-related authentication operations.
FWSMs will be in release 2.2, inserted in Catalyst 6500 (MSFC IOS), in routed mode, in multi-switch active / standby setup, with multiple contexts configured.
User and administrator access management will be performed thanks to a radius ACS server.
I intend to install ACS onto an armored windows 2000 server SP4 , using a local database.
PDM 4.0 is needed in order to manage multiple-contexts on FWSMs.
Are there any points I should be aware about such a configuration, especially regarding the user and administrator authentication access management setup ?
The fact is that administrators will have to be defined and restricted to their own context, without privileges onto other contexts. Do you have feedback about such a setup or relevant information to point to me ?
Many thanks in advance for your attention.
Best regards,
ArnaudEach of the contexts will behave like individual firewalls for your purposes here. So, they each get a AAA config, and you could put them into their own groups for access control. Protect the Admin context especially well, it controls system resources for the others. Depending on how many FWSMs you have, you may want to look into the Pix MC, which is similar to PDM, but works for multiple FWSMs. It is a part of CiscoWorks VMS.
-Paul -
How to start ftp under solaris 10
Hi,
if I try to enable ftp under Solaris 10, I get the message "unsatisfied dependencies":
root@u015ad2a:.../>svcadm -v enable -rst svc:/network/ftp:default
svc:/network/ftp:default temporarily enabled.
svc:/network/inetd:default temporarily enabled.
svc:/network/loopback temporarily enabled.
svc:/system/filesystem/local temporarily enabled.
svc:/milestone/single-user temporarily enabled.
svc:/system/identity:node temporarily enabled.
svc:/system/filesystem/minimal temporarily enabled.
svc:/system/filesystem/usr temporarily enabled.
svc:/system/filesystem/root temporarily enabled.
svc:/system/device/local temporarily enabled.
svc:/milestone/devices temporarily enabled.
svc:/system/manifest-import temporarily enabled.
svc:/milestone/sysconfig temporarily enabled.
svc:/milestone/name-services temporarily enabled.
svcadm: Instance "svc:/network/ftp:default" has unsatisfied dependencies.
root@u015ad2a:.../>svcs svc:/network/ftp:default
STATE STIME FMRI
uninitialized 9:40:09 svc:/network/ftp:default
How can I enable ftp?This looks sort of like what happened to me just now. I tried svcs -x
and got:
# svcs -x
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Mon Apr 18 13:01:12 2005
Reason: Restarter svc:/network/inetd:default has not initialized service state.
See: http://sun.com/msg/SMF-8000-4D
See: gssd(1M)
Impact: 10 dependent services are not running. (Use -v for list.)
svc:/network/service:default (layered network services)
State: offline since Mon Apr 18 13:01:29 2005
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: ifconfig(1M)
See: /var/svc/log/network-service:default.log
Impact: 4 dependent services are not running. (Use -v for list.)
svc:/application/print/server:default (LP print server)
State: disabled since Mon Apr 18 13:01:12 2005
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: lpsched(1M)
Impact: 1 dependent service is not running. (Use -v for list.)
I tried all kinds of things to get gss to run, but I finally realized that
it was really ifconfig that was the problem. The system has two
network interfaces, and during installation I gave both of them
a name. However, hme1 was not really connected to anything.
All I did to get it to work was
# cd /etc
# mv hostname.hme1 no.hme1
After that, I rebooted, and everything came up OK. I don't know
if the original problem was the same, but this solved my problem. -
I have the iPhone 4S and the wifi was working on it earlier yesterday. I noticed that the wifi didn't kick on last night. It has the network memorized so it could connect automatically. The network name pops up and there's a signal but the spinning circle thing is there and it won't put a check mark by the network name. The wifi will pop up every now and then but only stay for a minute or less. Everyone else's phone and computer is connecting just fine but mine isn't. It won't switch over to WiFi from 4G. I've tried turning off the wifi on my phone. I've tried to forget the network and put in the password numerous of times and I tried to fix it by turning my phone on and off and that still didn't work. I'm hoping that this is a temporary thing but I don't know. What's a good way to fix this because seriously I would like to not use up all of my data for this kind of bull crap. So what's a good way to fix this?
I got the ATV hooked up to the WiFi after manually inputting the DHCP settings.
The ATV will not see iTunes from a PC on the same iTune network. I guess you need an Apple computer for iTunes to connect to the ATV.
The biggest problem is that the iTunes store on the ATV is nonexistent I imagine because of competition/ monopolies in the UAE. If I was in Lao, Burma, Thailand, Mozambique no problem. 40 Countries are listed and non of them are from the Middle East. When I logon to the iTunes store on my PC it too does not allow for me to buy any movies or TV shows. I am not sure why.
As for the iPad OS6, iTunes has an icon and when you click it you get iTune U or Podcast, no video content. The App store works fine and they are always happy to take your money but no video content.
To top it all off YouTube is no longer licensed under OS6.0 and although I can get it on Google Chrome it is by no means as quick (for reasons unknown).
As I said before if I choose United States as my country the ATV hooks up and lets me browse TV and movies and watch trailers but not able to purchase (obviously).
So my conclusion is that ATV will not hook up to the iTune store in the UAE? If this is incorrect please clue me in. -
Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?
Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts. -
How do I delete a network and start over with no wired computers??
I've been trying forever to delete my parents network...it has a WEP I can't remember, and I just want to start from scratch. I've tried reseting the router...I've even called a Linksys tech, and even she was baffled. I have no wired computers...Can anyone help???
The only thing you can't do is upgrade the firmware.
That being said ... I have to assume you are using Windows XP and windows is managing the wireless network connections.
If any of these assumptions are false, my advice may not be as helpful.
Step 1. Delete all networks from the Preferred Networks list.
- open the wireless network connections window (double-click on icon in task bar)
- click on Advanced tab (bottom left)
- select each network that is shown and delete/remove it (can't remember what the button is called)
Step 2. Reset the router.
- unplugging the router does not accomplish anything here
- locate the reset button ... press AND hold for at least 5 seconds
- once you release the button, various lights on the front panel will flash as the router boots
- when you have a steady green for power, look to see if you have a green light for WLAN
- if the wireless is turned OFF by default (no green light for WLAN) you will have to find a way connect wired for at least a few minutes to turn it on (take it to a friends, bring the friend to it ... whatever works)
Step 3. Setup the router for secure wireless.
- if the WLAN is lit after resetting, you should see a notification on the computer saying "one or more wireless networks are in range"
- click on that notification and find an unsecured network called linksys (if there is more then one, pick the one with the highest signal strength)
- once you connect to that, open Internet Explorer and in the address bar type 192.168.1.1
- the user name is left blank and the password is admin
- change the password (under the Administration tab)
- under the Wireless tab change the SSID name
- under the Wireless Security tab choose WPA-shared key (better the WEP) and a phrase
- once you apply the changes you will lose your connection
- go back into the wireless network connections window and you should now see a secured network with the name you picked
- try to connect to it, a dialog will appear asking for encryption type (WPA-shared key) and phrase
- once you have successfully connected windows will automatically set up that network as default and connect to it whenever it is in range.
Let me know if any of this is ?!?
Dan -
WebLogic 5.1.0 crashes under Solaris
Hi,
I am using weblogic 5.1.0 under Solaris 8. Database is Oracle 8i Enterprise Edition Release 8.1.6.0.0.
WebLogic crashes with following dump. I will be very thankful if someone can help me out.
Thanks,
Viresh
Dump is as follows :
SIGSEGV 11 segmentation violation
si_signo [11]: SEGV
si_errno [0]:
si_code [1]: SEGV_MAPERR [addr: 0x14]
stackpointer=E9CAEA68
"Thread-69" (TID:0x4873e90, sys_thread_t:0x4873dc8, state:CW, thread_t: t@138, threadID:0xe9c81d78, stack_bottom:0xe9c82000, stack_size:0x20000) prio=5
[1] java.lang.Thread.sleep(Native Method)
[2] com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:173)
"Thread-8" (TID:0x41c5a48, sys_thread_t:0x41c5980, state:R, thread_t: t@47, threadID:0xe9cb1d78, stack_bottom:0xe9cb2000, stack_size:0x20000) prio=5 current thread
[1] weblogic.db.oci.OciCursor.exec(Native Method)
[2] weblogic.db.oci.OciCursor.oci_exec(OciCursor.java:1816)
[3] weblogic.jdbcbase.oci.Statement.executeUpdate(Statement.java:823)
[4] weblogic.jdbcbase.oci.Statement.execute(Statement.java:1351)
[5] weblogic.jdbc.pool.PreparedStatement.execute(PreparedStatement.java:33)
[6] com.zaplet.schema.GetNextDeliveriesSP.execute(GetNextDeliveriesSP.java:142)
[7] com.zaplet.core.DigestThread.getNextBatch(DigestThread.java:194)
[8] com.zaplet.core.DigestThread.deliverDigests(DigestThread.java:131)
[9] com.zaplet.core.DigestThread.run(DigestThread.java:109)
"Thread-1" (TID:0x3f292e0, sys_thread_t:0x3f29218, state:CW, thread_t: t@37, threadID:0xe9ce1d78, stack_bottom:0xe9ce2000, stack_size:0x20000) prio=5
[1] java.lang.Thread.sleep(Native Method)
[2] com.zaplet.util.WorkerThread.run(WorkerThread.java:32)
"SSLListenThread" (TID:0x3d05d08, sys_thread_t:0x3d05c40, state:R, thread_t: t@36, threadID:0xe9d41d78, stack_bottom:0xe9d42000, stack_size:0x20000) prio=5
[1] java.net.PlainSocketImpl.socketAccept(Native Method)
[2] java.net.PlainSocketImpl.accept(PlainSocketImpl.java:406)
[3] java.net.ServerSocket.implAccept(ServerSocket.java:240)
[4] java.net.ServerSocket.accept(ServerSocket.java:224)
[5] weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.java:121)
[6] weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:112)
[7] weblogic.t3.srvr.ListenThread.run(ListenThread.java:226)
"ListenThread" (TID:0x742500, sys_thread_t:0x742438, state:R, thread_t: t@35, threadID:0xe9f01d78, stack_bottom:0xe9f02000, stack_size:0x20000) prio=5
[1] java.net.PlainSocketImpl.socketAccept(Native Method)
[2] java.net.PlainSocketImpl.accept(PlainSocketImpl.java:406)
[3] java.net.ServerSocket.implAccept(ServerSocket.java:238)
[4] java.net.ServerSocket.accept(ServerSocket.java:223)
[5] weblogic.t3.srvr.ListenThread.run(ListenThread.java:226)
"NBExecuteThread-1" (TID:0x8ee3d0, sys_thread_t:0x8ee308, state:CW, thread_t: t@31, threadID:0xe9f31d78, stack_bottom:0xe9f32000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"NBExecuteThread-0" (TID:0x8d8cc8, sys_thread_t:0x8d8c00, state:CW, thread_t: t@30, threadID:0xe9f81d78, stack_bottom:0xe9f82000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-19" (TID:0x8ec930, sys_thread_t:0x8ec868, state:MW, thread_t: t@29, threadID:0xe9fb1d78, stack_bottom:0xe9fb2000, stack_size:0x20000) prio=5
[1] weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
[2] weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-18" (TID:0x8d94c8, sys_thread_t:0x8d9400, state:R, thread_t: t@28, threadID:0xea001d78, stack_bottom:0xea002000, stack_size:0x20000) prio=5
[1] weblogic.socket.PosixSocketMuxer.poll(Native Method)
[2] weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
[3] weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
[4] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-17" (TID:0x8f5100, sys_thread_t:0x8f5038, state:MW, thread_t: t@27, threadID:0xea031d78, stack_bottom:0xea032000, stack_size:0x20000) prio=5
[1] weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
[2] weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-16" (TID:0x8a1508, sys_thread_t:0x8a1440, state:CW, thread_t: t@26, threadID:0xea081d78, stack_bottom:0xea082000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-15" (TID:0x8d8738, sys_thread_t:0x8d8670, state:MW, thread_t: t@25, threadID:0xea0b1d78, stack_bottom:0xea0b2000, stack_size:0x20000) prio=5
[1] java.sql.DriverManager.getConnection(DriverManager.java:104)
[2] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
[3] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
[4] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
[5] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
[6] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
[7] jsp._layout3._snippets._author._defaultEndWire._jspService(_defaultEndWire.java:69)
[8] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
[9] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[10] weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:200)
[11] weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:172)
[12] weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:105)
[13] jsp._sending._sentokay._jspService(_sentokay.java:69)
[14] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
[15] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[16] weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:96)
[17] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
[18] com.zaplet.StoreCreateServlet.sendMessage(StoreCreateServlet.java:510)
[19] com.zaplet.StoreCreateServlet.handleSend(StoreCreateServlet.java:272)
[20] com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:163)
[21] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:78)
[22] javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
[23] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
[24] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[25] weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:154)
[26] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
[27] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
[28] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
[29] javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
[30] javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
[31] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
... remainder of stack truncated ...
"ExecuteThread-14" (TID:0x8e40d0, sys_thread_t:0x8e4008, state:CW, thread_t: t@24, threadID:0xea101d78, stack_bottom:0xea102000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-13" (TID:0x8facd8, sys_thread_t:0x8fac10, state:CW, thread_t: t@23, threadID:0xea131d78, stack_bottom:0xea132000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-12" (TID:0x8e0cf8, sys_thread_t:0x8e0c30, state:CW, thread_t: t@22, threadID:0xea181d78, stack_bottom:0xea182000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-11" (TID:0x938018, sys_thread_t:0x937f50, state:CW, thread_t: t@21, threadID:0xea1b1d78, stack_bottom:0xea1b2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-10" (TID:0x936e40, sys_thread_t:0x936d78, state:MW, thread_t: t@20, threadID:0xea201d78, stack_bottom:0xea202000, stack_size:0x20000) prio=5
[1] java.sql.DriverManager.getConnection(DriverManager.java:104)
[2] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
[3] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
[4] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
[5] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
[6] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
[7] jsp._errors._index._jspService(_index.java:69)
[8] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
[9] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[10] weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:96)
[11] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
[12] com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:160)
[13] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:41)
[14] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
[15] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
[16] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[17] weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:96)
[18] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
[19] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
[20] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
[21] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
[22] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
[23] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[24] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:723)
[25] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:707)
[26] weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:102)
[27] weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
[28] weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
[29] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-9" (TID:0x8a2ce8, sys_thread_t:0x8a2c20, state:CW, thread_t: t@19, threadID:0xea231d78, stack_bottom:0xea232000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-8" (TID:0x934cb0, sys_thread_t:0x934be8, state:CW, thread_t: t@18, threadID:0xea281d78, stack_bottom:0xea282000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-7" (TID:0x885108, sys_thread_t:0x885040, state:CW, thread_t: t@17, threadID:0xea2b1d78, stack_bottom:0xea2b2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-6" (TID:0x8a6cf8, sys_thread_t:0x8a6c30, state:CW, thread_t: t@16, threadID:0xea2f1d78, stack_bottom:0xea2f2000, stack_size:0x20000) prio=5
[1] weblogic.common.internal.DynaQueue.getW(DynaQueue.java:219)
[2] weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:561)
[3] weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:555)
[4] weblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAllocator.java:544)
[5] weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:162)
[6] weblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(ConnectionPool.java:145)
[7] weblogic.jdbcbase.pool.Driver.connect(Driver.java:65)
[8] java.sql.DriverManager.getConnection(DriverManager.java:433)
[9] java.sql.DriverManager.getConnection(DriverManager.java:104)
[10] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
[11] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
[12] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
[13] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
[14] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
[15] jsp._authorpages._contacts._jspService(_contacts.java:96)
[16] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
[17] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[18] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:723)
[19] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:707)
[20] weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:102)
[21] weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
[22] weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
[23] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-5" (TID:0x92be00, sys_thread_t:0x92bd38, state:CW, thread_t: t@15, threadID:0xeadb1d78, stack_bottom:0xeadb2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-4" (TID:0x897cf8, sys_thread_t:0x897c30, state:MW, thread_t: t@14, threadID:0xeadf1d78, stack_bottom:0xeadf2000, stack_size:0x20000) prio=5
[1] java.sql.DriverManager.println(DriverManager.java:364)
[2] weblogic.jdbcbase.oci.Statement.private_parse(Statement.java:687)
[3] weblogic.jdbc.oci.Connection.prepareCall(Connection.java:52)
[4] weblogic.jdbc.pool.Connection.prepareCall(Connection.java:71)
[5] com.zaplet.schema.UserSP.execute1(UserSP.java:185)
[6] com.zaplet.schema.UserSP.execute(UserSP.java:159)
[7] com.zaplet.UserUtils.checkAndAddUser(UserUtils.java:51)
[8] com.zaplet.Zaplet.createMessageObject(Zaplet.java:1588)
[9] com.zaplet.Zaplet.storeZaplet(Zaplet.java:1083)
[10] com.zaplet.StoreCreateServlet.handleStoreCreate(StoreCreateServlet.java:246)
[11] com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:158)
[12] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:41)
[13] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
[14] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
[15] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[16] weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:96)
[17] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
[18] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
[19] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
[20] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
[21] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
[22] weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:114)
[23] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:723)
[24] weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:707)
[25] weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:102)
[26] weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
[27] weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
[28] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-3" (TID:0x8980f8, sys_thread_t:0x898030, state:CW, thread_t: t@13, threadID:0xeafd1d78, stack_bottom:0xeafd2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-2" (TID:0x8b94f8, sys_thread_t:0x8b9430, state:CW, thread_t: t@12, threadID:0xeb3b1d78, stack_bottom:0xeb3b2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-1" (TID:0x92f978, sys_thread_t:0x92f8b0, state:CW, thread_t: t@11, threadID:0xeb3e1d78, stack_bottom:0xeb3e2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"ExecuteThread-0" (TID:0x921968, sys_thread_t:0x9218a0, state:CW, thread_t: t@10, threadID:0xebea1d78, stack_bottom:0xebea2000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
[3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
"TimeEventGenerator" (TID:0x8d9aa8, sys_thread_t:0x8d99e0, state:CW, thread_t: t@9, threadID:0xebed1d78, stack_bottom:0xebed2000, stack_size:0x20000) prio=5
[1] weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:256)
[2] weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:131)
[3] java.lang.Thread.run(Thread.java:479)
"SpinnerRandomSource" (TID:0x8a7500, sys_thread_t:0x8a7438, state:CW, thread_t: t@8, threadID:0xed041d78, stack_bottom:0xed042000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java:102)
[3] weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:116)
Exiting Thread (sys_thread_t:0xff30e2e8) : no stack
"Finalizer" (TID:0x2cfa80, sys_thread_t:0x2cf9b8, state:CW, thread_t: t@6, threadID:0xfe3e1d78, stack_bottom:0xfe3e2000, stack_size:0x20000) prio=8
[1] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:146)
[2] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:168)
[3] java.lang.ref.Finalizer$FinalizerWorker$FinalizerThread.run(Finalizer.java:124)
"Reference Handler" (TID:0x2cd2a0, sys_thread_t:0x2cd1d8, state:CW, thread_t: t@5, threadID:0xfec41d78, stack_bottom:0xfec42000, stack_size:0x20000) prio=10
[1] java.lang.Object.wait(Object.java:424)
[2] java.lang.ref.Reference$ReferenceHandler.run(Reference.java:130)
"Signal dispatcher" (TID:0x2aa5f0, sys_thread_t:0x2aa528, state:MW, thread_t: t@4, threadID:0xfed41d78, stack_bottom:0xfed42000, stack_size:0x20000) prio=10
"main" (TID:0x38280, sys_thread_t:0x381b8, state:CW, thread_t: t@1, threadID:0x25118, stack_bottom:0xffbf0000, stack_size:0x20000) prio=5
[1] java.lang.Object.wait(Object.java:424)
[2] weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:1787)
[3] java.lang.reflect.Method.invoke(Native Method)
[4] weblogic.Server.startServerDynamically(Server.java:107)
[5] weblogic.Server.main(Server.java:65)
[6] weblogic.Server.main(Server.java:55)
Yup, try toggling between Solaris JDK 1.2.2 and 1.3. We've also experienced
seg fault problems with a certain JDK + JDBC driver combo.
Gene
"sumanth" <[email protected]> wrote in message
news:[email protected]...
> seg fault errors according to weblogic can be caused by the following 3
> reasons
> 1) native muxer
> 2) jdbc 2 drivers
> 3) jvm
>
> I dont know what the first one means. We had faced one similar problem
but
> when we upgraded our jdk to 1.3 things were back to normal. (weblogic
> supports 1.2)
>
> -Sumanth
>
> "Viresh Jain" <[email protected]> wrote in message
> news:[email protected]...
> >
> > Hi,
> > I am using weblogic 5.1.0 under Solaris 8. Database is Oracle 8i
> Enterprise Edition Release 8.1.6.0.0.
> >
> > WebLogic crashes with following dump. I will be very thankful if someone
> can help me out.
> >
> > Thanks,
> > Viresh
> >
> > Dump is as follows :
> >
> > SIGSEGV 11 segmentation violation
> > si_signo [11]: SEGV
> > si_errno [0]:
> > si_code [1]: SEGV_MAPERR [addr: 0x14]
> >
> > stackpointer=E9CAEA68
> > "Thread-69" (TID:0x4873e90, sys_thread_t:0x4873dc8, state:CW, thread_t:
> t@138, threadID:0xe9c81d78, stack_bottom:0xe9c82000, stack_size:0x20000)
> prio=5
> >
> > [1] java.lang.Thread.sleep(Native Method)
> > [2] com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:173)
> > -------------------
> > "Thread-8" (TID:0x41c5a48, sys_thread_t:0x41c5980, state:R, thread_t:
> t@47, threadID:0xe9cb1d78, stack_bottom:0xe9cb2000, stack_size:0x20000)
> prio=5 current thread
> >
> > [1] weblogic.db.oci.OciCursor.exec(Native Method)
> > [2] weblogic.db.oci.OciCursor.oci_exec(OciCursor.java:1816)
> > [3] weblogic.jdbcbase.oci.Statement.executeUpdate(Statement.java:823)
> > [4] weblogic.jdbcbase.oci.Statement.execute(Statement.java:1351)
> > [5]
> weblogic.jdbc.pool.PreparedStatement.execute(PreparedStatement.java:33)
> > [6]
>
com.zaplet.schema.GetNextDeliveriesSP.execute(GetNextDeliveriesSP.java:142)
> > [7] com.zaplet.core.DigestThread.getNextBatch(DigestThread.java:194)
> > [8] com.zaplet.core.DigestThread.deliverDigests(DigestThread.java:131)
> > [9] com.zaplet.core.DigestThread.run(DigestThread.java:109)
> > -------------------
> > "Thread-1" (TID:0x3f292e0, sys_thread_t:0x3f29218, state:CW, thread_t:
> t@37, threadID:0xe9ce1d78, stack_bottom:0xe9ce2000, stack_size:0x20000)
> prio=5
> >
> > [1] java.lang.Thread.sleep(Native Method)
> > [2] com.zaplet.util.WorkerThread.run(WorkerThread.java:32)
> > -------------------
> > "SSLListenThread" (TID:0x3d05d08, sys_thread_t:0x3d05c40, state:R,
> thread_t: t@36, threadID:0xe9d41d78, stack_bottom:0xe9d42000,
> stack_size:0x20000) prio=5
> >
> > [1] java.net.PlainSocketImpl.socketAccept(Native Method)
> > [2] java.net.PlainSocketImpl.accept(PlainSocketImpl.java:406)
> > [3] java.net.ServerSocket.implAccept(ServerSocket.java:240)
> > [4] java.net.ServerSocket.accept(ServerSocket.java:224)
> > [5]
>
weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.java
> :121)
> > [6]
weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:112)
> > [7] weblogic.t3.srvr.ListenThread.run(ListenThread.java:226)
> > -------------------
> > "ListenThread" (TID:0x742500, sys_thread_t:0x742438, state:R, thread_t:
> t@35, threadID:0xe9f01d78, stack_bottom:0xe9f02000, stack_size:0x20000)
> prio=5
> >
> > [1] java.net.PlainSocketImpl.socketAccept(Native Method)
> > [2] java.net.PlainSocketImpl.accept(PlainSocketImpl.java:406)
> > [3] java.net.ServerSocket.implAccept(ServerSocket.java:238)
> > [4] java.net.ServerSocket.accept(ServerSocket.java:223)
> > [5] weblogic.t3.srvr.ListenThread.run(ListenThread.java:226)
> > -------------------
> > "NBExecuteThread-1" (TID:0x8ee3d0, sys_thread_t:0x8ee308, state:CW,
> thread_t: t@31, threadID:0xe9f31d78, stack_bottom:0xe9f32000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "NBExecuteThread-0" (TID:0x8d8cc8, sys_thread_t:0x8d8c00, state:CW,
> thread_t: t@30, threadID:0xe9f81d78, stack_bottom:0xe9f82000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-19" (TID:0x8ec930, sys_thread_t:0x8ec868, state:MW,
> thread_t: t@29, threadID:0xe9fb1d78, stack_bottom:0xe9fb2000,
> stack_size:0x20000) prio=5
> >
> > [1]
> weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
> > [2]
> weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-18" (TID:0x8d94c8, sys_thread_t:0x8d9400, state:R,
> thread_t: t@28, threadID:0xea001d78, stack_bottom:0xea002000,
> stack_size:0x20000) prio=5
> >
> > [1] weblogic.socket.PosixSocketMuxer.poll(Native Method)
> > [2]
> weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
> > [3]
> weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
> > [4] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-17" (TID:0x8f5100, sys_thread_t:0x8f5038, state:MW,
> thread_t: t@27, threadID:0xea031d78, stack_bottom:0xea032000,
> stack_size:0x20000) prio=5
> >
> > [1]
> weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:259)
> > [2]
> weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-16" (TID:0x8a1508, sys_thread_t:0x8a1440, state:CW,
> thread_t: t@26, threadID:0xea081d78, stack_bottom:0xea082000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-15" (TID:0x8d8738, sys_thread_t:0x8d8670, state:MW,
> thread_t: t@25, threadID:0xea0b1d78, stack_bottom:0xea0b2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.sql.DriverManager.getConnection(DriverManager.java:104)
> > [2] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
> > [3] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
> > [4] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
> > [5] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
> > [6] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
> > [7]
>
jsp._layout3._snippets._author._defaultEndWire._jspService(_defaultEndWire.j
> ava:69)
> > [8] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > [9]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [10]
>
weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImp
> l.java:200)
> > [11]
>
weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImp
> l.java:172)
> > [12]
> weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:105)
> > [13] jsp._sending._sentokay._jspService(_sentokay.java:69)
> > [14] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > [15]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [16]
>
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
> l.java:96)
> > [17] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
> > [18]
> com.zaplet.StoreCreateServlet.sendMessage(StoreCreateServlet.java:510)
> > [19]
com.zaplet.StoreCreateServlet.handleSend(StoreCreateServlet.java:272)
> > [20]
>
com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:163)
> > [21] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:78)
> > [22] javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
> > [23] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
> > [24]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [25]
>
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
> l.java:154)
> > [26] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
> > [27] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
> > [28] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
> > [29] javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
> > [30] javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
> > [31]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > ... remainder of stack truncated ...
> > -------------------
> > "ExecuteThread-14" (TID:0x8e40d0, sys_thread_t:0x8e4008, state:CW,
> thread_t: t@24, threadID:0xea101d78, stack_bottom:0xea102000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-13" (TID:0x8facd8, sys_thread_t:0x8fac10, state:CW,
> thread_t: t@23, threadID:0xea131d78, stack_bottom:0xea132000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-12" (TID:0x8e0cf8, sys_thread_t:0x8e0c30, state:CW,
> thread_t: t@22, threadID:0xea181d78, stack_bottom:0xea182000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-11" (TID:0x938018, sys_thread_t:0x937f50, state:CW,
> thread_t: t@21, threadID:0xea1b1d78, stack_bottom:0xea1b2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-10" (TID:0x936e40, sys_thread_t:0x936d78, state:MW,
> thread_t: t@20, threadID:0xea201d78, stack_bottom:0xea202000,
> stack_size:0x20000) prio=5
> >
> > [1] java.sql.DriverManager.getConnection(DriverManager.java:104)
> > [2] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
> > [3] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
> > [4] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
> > [5] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
> > [6] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
> > [7] jsp._errors._index._jspService(_index.java:69)
> > [8] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > [9]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [10]
>
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
> l.java:96)
> > [11] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
> > [12]
>
com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:160)
> > [13] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:41)
> > [14] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
> > [15] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
> > [16]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [17]
>
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
> l.java:96)
> > [18] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
> > [19] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
> > [20] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
> > [21] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
> > [22] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
> > [23]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [24]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:723)
> > [25]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:707)
> > [26]
>
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
> Manager.java:102)
> > [27]
>
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
> > [28]
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
> > [29] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-9" (TID:0x8a2ce8, sys_thread_t:0x8a2c20, state:CW,
> thread_t: t@19, threadID:0xea231d78, stack_bottom:0xea232000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-8" (TID:0x934cb0, sys_thread_t:0x934be8, state:CW,
> thread_t: t@18, threadID:0xea281d78, stack_bottom:0xea282000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-7" (TID:0x885108, sys_thread_t:0x885040, state:CW,
> thread_t: t@17, threadID:0xea2b1d78, stack_bottom:0xea2b2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-6" (TID:0x8a6cf8, sys_thread_t:0x8a6c30, state:CW,
> thread_t: t@16, threadID:0xea2f1d78, stack_bottom:0xea2f2000,
> stack_size:0x20000) prio=5
> >
> > [1] weblogic.common.internal.DynaQueue.getW(DynaQueue.java:219)
> > [2]
>
weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:56
> 1)
> > [3]
>
weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:55
> 5)
> > [4]
>
weblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAllocator
> .java:544)
> > [5]
>
weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:162
> )
> > [6]
>
weblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(ConnectionPool.
> java:145)
> > [7] weblogic.jdbcbase.pool.Driver.connect(Driver.java:65)
> > [8] java.sql.DriverManager.getConnection(DriverManager.java:433)
> > [9] java.sql.DriverManager.getConnection(DriverManager.java:104)
> > [10] com.zaplet.data.DataManager.getConnection(DataManager.java:98)
> > [11] com.zaplet.db.DbTrans.<init>(DbTrans.java:244)
> > [12] com.zaplet.schema.UserQuery.execute(UserQuery.java:97)
> > [13] com.zaplet.UserUtils.findByUserId(UserUtils.java:289)
> > [14] com.zaplet.ZapletSession.isLoggedIn(ZapletSession.java:36)
> > [15] jsp._authorpages._contacts._jspService(_contacts.java:96)
> > [16] weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > [17]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [18]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:723)
> > [19]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:707)
> > [20]
>
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
> Manager.java:102)
> > [21]
>
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
> > [22]
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
> > [23] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-5" (TID:0x92be00, sys_thread_t:0x92bd38, state:CW,
> thread_t: t@15, threadID:0xeadb1d78, stack_bottom:0xeadb2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-4" (TID:0x897cf8, sys_thread_t:0x897c30, state:MW,
> thread_t: t@14, threadID:0xeadf1d78, stack_bottom:0xeadf2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.sql.DriverManager.println(DriverManager.java:364)
> > [2] weblogic.jdbcbase.oci.Statement.private_parse(Statement.java:687)
> > [3] weblogic.jdbc.oci.Connection.prepareCall(Connection.java:52)
> > [4] weblogic.jdbc.pool.Connection.prepareCall(Connection.java:71)
> > [5] com.zaplet.schema.UserSP.execute1(UserSP.java:185)
> > [6] com.zaplet.schema.UserSP.execute(UserSP.java:159)
> > [7] com.zaplet.UserUtils.checkAndAddUser(UserUtils.java:51)
> > [8] com.zaplet.Zaplet.createMessageObject(Zaplet.java:1588)
> > [9] com.zaplet.Zaplet.storeZaplet(Zaplet.java:1083)
> > [10]
>
com.zaplet.StoreCreateServlet.handleStoreCreate(StoreCreateServlet.java:246)
> > [11]
>
com.zaplet.StoreCreateServlet.storeCreateHelper(StoreCreateServlet.java:158)
> > [12] com.zaplet.StoreCreateServlet.doPost(StoreCreateServlet.java:41)
> > [13] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
> > [14] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
> > [15]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [16]
>
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
> l.java:96)
> > [17] com.zaplet.ZServlet.forwardRequest(ZServlet.java:46)
> > [18] com.zaplet.PreviewServlet.processInputs(PreviewServlet.java:284)
> > [19] com.zaplet.PreviewServlet.doPost(PreviewServlet.java:33)
> > [20] javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
> > [21] javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
> > [22]
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> :114)
> > [23]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:723)
> > [24]
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> l.java:707)
> > [25]
>
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
> Manager.java:102)
> > [26]
>
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:344)
> > [27]
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:244)
> > [28] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-3" (TID:0x8980f8, sys_thread_t:0x898030, state:CW,
> thread_t: t@13, threadID:0xeafd1d78, stack_bottom:0xeafd2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-2" (TID:0x8b94f8, sys_thread_t:0x8b9430, state:CW,
> thread_t: t@12, threadID:0xeb3b1d78, stack_bottom:0xeb3b2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-1" (TID:0x92f978, sys_thread_t:0x92f8b0, state:CW,
> thread_t: t@11, threadID:0xeb3e1d78, stack_bottom:0xeb3e2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "ExecuteThread-0" (TID:0x921968, sys_thread_t:0x9218a0, state:CW,
> thread_t: t@10, threadID:0xebea1d78, stack_bottom:0xebea2000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:103)
> > [3] weblogic.kernel.ExecuteThread.run(ExecuteThread.java:111)
> > -------------------
> > "TimeEventGenerator" (TID:0x8d9aa8, sys_thread_t:0x8d99e0, state:CW,
> thread_t: t@9, threadID:0xebed1d78, stack_bottom:0xebed2000,
> stack_size:0x20000) prio=5
> >
> > [1] weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:256)
> > [2]
>
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java
> :131)
> > [3] java.lang.Thread.run(Thread.java:479)
> > -------------------
> > "SpinnerRandomSource" (TID:0x8a7500, sys_thread_t:0x8a7438, state:CW,
> thread_t: t@8, threadID:0xed041d78, stack_bottom:0xed042000,
> stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2]
>
weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java:10
> 2)
> > [3]
weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:116)
> > -------------------
> >
> > Exiting Thread (sys_thread_t:0xff30e2e8) : no stack
> > "Finalizer" (TID:0x2cfa80, sys_thread_t:0x2cf9b8, state:CW, thread_t:
t@6,
> threadID:0xfe3e1d78, stack_bottom:0xfe3e2000, stack_size:0x20000) prio=8
> >
> > [1] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:146)
> > [2] java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:168)
> > [3]
>
java.lang.ref.Finalizer$FinalizerWorker$FinalizerThread.run(Finalizer.java:1
> 24)
> > -------------------
> > "Reference Handler" (TID:0x2cd2a0, sys_thread_t:0x2cd1d8, state:CW,
> thread_t: t@5, threadID:0xfec41d78, stack_bottom:0xfec42000,
> stack_size:0x20000) prio=10
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] java.lang.ref.Reference$ReferenceHandler.run(Reference.java:130)
> > -------------------
> > "Signal dispatcher" (TID:0x2aa5f0, sys_thread_t:0x2aa528, state:MW,
> thread_t: t@4, threadID:0xfed41d78, stack_bottom:0xfed42000,
> stack_size:0x20000) prio=10
> >
> > -------------------
> > "main" (TID:0x38280, sys_thread_t:0x381b8, state:CW, thread_t: t@1,
> threadID:0x25118, stack_bottom:0xffbf0000, stack_size:0x20000) prio=5
> >
> > [1] java.lang.Object.wait(Object.java:424)
> > [2] weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:1787)
> > [3] java.lang.reflect.Method.invoke(Native Method)
> > [4] weblogic.Server.startServerDynamically(Server.java:107)
> > [5] weblogic.Server.main(Server.java:65)
> > [6] weblogic.Server.main(Server.java:55)
> > -------------------
> >
> >
>
-
DPM 2012 R2 failing on backup of BMR and System State
We are running DPM 2012 R2 on Windows Server 2012 and I am trying to protect another Windows 2012 Server with a Bare Metal Recovery and system state but it fails on initial synchronization. I get the following error in DPM:
DPM failed to create the backup. If you are backing up only System State, verify if there is enough free space on the protected computer to store the System State backup. On protected computers running Windows Server2008, verify that Windows Server
Backup (WSB) is installed and that it is not performing any other backup or recovery task. (ID 30214 Details: Internal error code: 0x80990ED0)
This is a new server and there is 65.7 GB of 99.9 GB free on the C drive. 131 of 136 GB free on the F drive. The P drive only has 100 MB free of 36.3 GB but that is where the pagefile is located, nothing else is on the P drive.
Would that be a problem or is that irrelevant?
The replica volume is 30 GB and the recovery point volume is 6.06 GB. I tried increasing the replica volume all the way up to 200 GB and the recovery point volume to 30 GB but that didn't matter.
Why is this not working?Hi,
Try this and troubleshoot any errors along the way.
1) Set up a network share on a remote machine
\\server\bmrshare
2) From an administrative command prompt on the Protected Server you want the BMR backup for, type:
wbadmin.exe start backup -allcritical -backuptarget:\\server\bmrshare
This should show you the list of volumes included in the BMR backup and ask "Do you want to start the backup operation?. - Type
Y to continue..
3) Once completed, see how large the BMR backup is on the remote server, then resize the DPM replica accordingly to accommodate the size of the manual BMR backup.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
No interfaces up under solaris 8
hi,
I have a small problem with interfaces and configuring the net under solaris 8. The first thing is that there is a massage while the system is coming that there are no interfaces up.
When i use the ifconfig -a command to check it, the result is as follows:
lo0: FLAGS = 1000849 (up, loopback,running, multicast, ipv4) mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
my hardware is:
x86 family 6 Model 8 Stepping 6
AT/AT Compatibile
260 330 KB RAM
VGA: Intel Corporation 810 Graphics Controller Hub
NC: 3Com 3C920 Integrated Fast Ethernet ( 3C905C - TX Compatibile)
the next thing is that i dont even have the hostname file (e.g hostname.elxl0) in the etc directory.
What can i do about this. how can i create interfaces in order to b e able to configure the network?
Thaks for help in addvance
Dotiread Solaris x86 faq at http://sun.drydog.com/
Maybe you are looking for
-
To tell it from the beginning. I had a bootcamp partition. I erased the partition because I had wanted to increase it in size. So then when i tried to recreate the bootcamp partition i got errors saying I need to reinstall OS X because some files cou
-
i m new to java,,, running one simple code in JMS Topic... using weblogic.... server.. please help me as it is givng me the error.. that i have pasted below. thanx in advance Deepali my publisher code i m giving below : ******************************
-
Why i can't see table, image, attacth files in meeting request mail.
Hi, I'm Narongdech i have a little question in outlook 2013. Why i can't see table, image, attacth files in meeting request mail. i try make a new meeting request for my partner. but them can't see new mail in the correct format. below,This is a ima
-
I have had my ZEN Microphoto for about year and i had dropped it from about 6 feet up in the air onto hard tile on accident. It stopped outputting audio through the headphone jack. Is there anying i can do to fix it or should i just by a new player?
-
Is it possible to generate a checksum on a URL before calling "f"
I have an AJAX process which adds a number of additional arguments that get passed through the URL, i.e. "&argname=" that are not supported via htmldb_Get or the "f" procedure. As a work around I have created my own PLSQL wrapper around the function