Network and Sharing Centre problems (again)

I seem to be tearing my hair out once again with the Network List Service. Several months back the Network and Sharing centre stopped displaying or reporting the active networks, although I was connected with internet access. A consequence was most of the
Metro apps would not work as they thought the computer was off-line.
The problem seemed to be that the permissions were wrong in the Network List hierarchy and adding Full Control for my user account in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\NetworkList' seemed to solve the problem.
Once again thought the Metro apps are not working reporting no internet connection and the Network and Sharing centre has the following message:
Unknown
The service to detect this status is disabled
More Information
When I select More Information I get a dialog asking if I want to turn on Network List Service, when I click "Turn this on' nothing happens.
Having looked in the Event Viewer, there are a large number of this entry, maybe it is related?
DCOM got error "1068" attempting to start the service netprofm with arguments "Unavailable" in order to run the server:
Network List Service is reported as running in Services.msc. and task manager.
I tried to check the permissions in the registry key as I did before but key was missing (i think). I tried switching to a local account on the computer from my Microsoft Live account but no change, although when I checked the registry, the NetworkList
key was there and the permissions were correct. Maybe I was just looking in the wrong place but I was pretty sure it was missing...
Not sure where to go next with this..

Hi,
The Network and Sharing centre opens as normal but where you would normally see
'View your active networks' followed by the network or list of networks that you are connected to it just says:
Unknown (when view your active networks would be)
The service to detect this status is disabled
More Information
Clicking on 'More information' informs me that the Network List Service is not running and asks if I want to start it, clicking yes does nothing. The Network list Service is listed as running in Service.msc
I have tried a full virus scan and also ran a whole host of anti malware tools and the computer seems clean. I also tried sfc /scannow with no problems detected.
I restored and old clonezilla backup I had and it is fine now but made a system backup before I did. This is the second time this has happened and I would like to find a solution so I will revert back to the drive image with the issue and post a screen shot.

Similar Messages

Hamachi isn't in network and sharing center

my network and sharing center used to have hamachi under my wifi but for whatever reason today i checked and my hamachi is gone from there. a tunnle errer (vpn error) is what alerted me of this. any help would be great.

I have same problem.
After uninstalling LLDP at network adapter settings it is impossible to install it again because of 'access denied' error.
Atleast my lltdsvc service is running for few seconds when I start it manually.
Could use some help, please.
Network map does not exist in windows 8 according to this site http://www.techrepublic.com/blog/windows-and-office/compensate-for-the-missing-network-map-feature-in-windows-8/

WIN-E4UR1A468LC in my "Network and Sharing Center"

I recently downloaded a couple of media players. After installing not only did they not work the way I wanted but I got some additional stuff (viruses) installed as well. I have ran my antivirus and anti malware live and in safe mode. I ran a rescue disk on my computer, and still I can't get onto the www. I can access my email via Microsoft Outlook, but both browsers (Internet Explorer and Firefox) can't connect to the internet. BTW, when I'm in "Safe Mode" or running my rescue disk, I can access the www just fine. Now I see in my "Network and Sharing Center" that I have a new device under the heading "Home Automation", WIN-E4UR1A468LC. Does anyone know what it is and what it does? I suspect it is, at least, part of my problem. Right clicking than going to Properties, doesn't tell me much either. Manufacturer: Lenovo
Model: LnvCon1.0
Model number 1-00-00
Device Website: Presentation webpage unavailable
Serial number: 0000001
M.A.C. address: Unavailable
Unique identifier: uuid: 73a2b265-6259-44ce-a03b-cdc5aa358dcf
IP address: 127.0.0.1 Obviously a bunch of bogus information.
I am afraid if I try to uninstall WIN-E4UR1A468LC I may end up doing more harm than good. Any help will be greatly appreciated.

download Portable Windows Repair (all in one) from one of the following:
http://www.tweaking.com/content/page/windows_repair_all_in_one.html
http://www.majorgeeks.com/Tweaking.com_-_Windows_Repair_Portable_d7222.html
http://www.bleepingcomputer.com/download/windows-repair-all-in-one-portable/
Unzip the contents into a newly created folder on your desktop. Make sure your AV protection is turned OFF before running the tool....
Open the folder, run the tool by right click on Repair_Windows (icon with red briefcase) select "Run as Administrator"
From the main GUI do the following:
Select Tab 3 and allow it to run Disk check
Select Tab 4 and allow it to run SFC
Select Tab 5 and Create System Restore Point
Select Start Repairs tab => Click the Start
The repairs window will open, uncheck the boxes as indicated, also the "Restart" option, then select Start...
DON'T use the computer while each scan is in progress.
Post the log, to access select "settings" tab > "open log folder" tab, log will be named _Windows_Repair_Log

Wifi icon and network and sharing center show no connection but I have full access

The wifi icon has an orange "ball" on it. Left click and it shows I am connected to my wifi. But at the top of the window is says "not connected." Go to Network and sharing center and it shows a red x going to the router.
All this and I have full access to the internet. What is going on? How to fix?
Duane G. Leet, PhD 45 years experience in technology

Hi，
For this issue, first I suggest you keep the latest driver for the network adapter, and disable other network adapters except the one you're using now, check if this issue persists.
or you can delete this wifi profile in manage wireless networks, then manually reconnect to this wifi, check if it make any difference.
I also would like to share this link with you
The Network Connection Status Icon
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
Yolanda Zhu
TechNet Community Support

Airport network and sharing Internet connection

Hello all,
I have hit this problem with sharing an internet connection on an airport network. Maybe its a simple fix, maybe it a "can not be done", answer.
My set up may be a little hard to describe. To explain, completely wireless set up in my network, 1 x imac and 1 x powerbook, all on airport and using an airport express. This includes my new printer. All connected through airport express network, call it network A.
Up till now i had a modem with an ether net cable plugged into the airport express. All was fine.
I am in jakarta, the cable internet providers here are hopeless, slow connection speed.
Last month a new wireless internet service was released. Called 3.5 G. Its lightning fast and reliable. Basically you get a wireless USB modem attach it to your computer and you are always connected to the internet wirelessly. You can travel anywhere with it. The 3.5G is primarily for mobile phones but i use it just for internet. This modem is connected to my powerbook and works great.
Now, the useless cable internet connected to my airport express is still connected for my Imac to use.
My problem is that i would like to share my high speed internet connection from my laptop to my imac. Problem is that when i allow sharing from my laptop, the intenet works fine on both machines but on the powerbook, which is doing the sharing you get an arrow symbol through the airport icon at the top.
The laptop can NOT access the local airport express network A. Hence i cannot use the printer or see the imac. That is my problem, i cannot print from the powerbook unless i stop sharing. When you share an internet connection the sharing computer seems to create another computer to computer network and does not join the existing arirport network.
This is probably a little confusing. Hopefully, someone may have some ideas. My alternative is to buy a new fixed position modem/router for the 3.5G system. Its about $600. Ouch.
Any ideas
thanks for the interest.
joe

Selamat Phil Smith,
Actually do we know each other, cause i know a phil smith.
Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
Cheers and thanks for the idea
joe

Airport Extreme joining a network and sharing wired internet connections

Hi everyone,
My new ISP installed their modem/wifi router (Sagemcom) in my home two months ago. Since I share HDDs over the wifi network, I installed my airport extreme near the modem/wifi router and used it to "extend the network", and it worked fine until recently. It stopped working suddently with the yellow light flashing. When I tried to reconfigure it, I always got errors, needing to reset it even to be able to see it again in Airport utility. Honestly, I have absolutely no idea why it stopped working. I tried connecting the Airport Extreme with an ethernet wire to the modem with the same result. So, I decided to move the airport extreme in my living room and use it to share the internet connection with my PS3, slingbox and Apple TV, telling myself that a partly wired connection would improve the signal (since I also had an Airport Express in the living room extending the network before everything stopped working). Now, everything works; the green light is on, HDDs are available on the wifi network, I can only connect to the Sagemcom routeur but, meh, what do you want, BUT, my slingbox, Apple TV and PS3 can't connect to the airport extreme through a wired connection.
Two questions:
1- Is it possible to share a wired internet connection with my Slingbox, PS3 and Apple TV from an Airport Extreme that has joined the network? If yes, what do I need to do to make it work?
2- Any idea why my first setup stopped working?
Any suggestions?
Thanks a lot,
Frank

1- Is it possible to share a wired internet connection with my Slingbox, PS3 and Apple TV from an Airport Extreme that has joined the network? If yes, what do I need to do to make it work?
Unfortunately, the Ethernet ports are not enabled when the AirPort Extreme is configured to "join" a wireless network.
Ironically, the less expensive AirPort Express does have the ability to "join" a wireless network and deliver an Ethernet signal at the port(s).
2- Any idea why my first setup stopped working?
None that you probably have not already thought about. The most commons cause is a sudden power outage, or even quick power "blip" can sometimes result in the Extreme to losing some of its configuration settings. Otherwise, gremlins are hard to catch.

Trying to connect 2 mac mini's as a network, and sharing printers

Hello to all. Please help me as I'm a newbie on these Mac mini's. I am trying to create a network between the two mini's and I would like to share files between them and be able to print from the upstairs mini to the printers hooked up to the downstairs mini.
Mini 1 (downstairs) has 2 printers attached directly, a HP color laserjet and a Epson 800 Artisan
Mini 2 (upstairs)
Mini 1 and mini 2 are both connected via ethernet to the Netgear router.
Here is my problem:
on the mini 1, I can print and even access the mini 2 via sharing. I can screen share and view folders that is on the mini 2.
However, from the mini 2 computer, I cannot get the screen share and folder sharing from the mini 1 computer. I show that it is there, but when I try to connect, I get a message that states: CONNECTION FAILED The server may no exist or it is not operation at this time. Check the server name or ip address and your network connection and try again.
On the mini 2 I also cannot get anything to print. It doesn't even show that the printers that are supposedly shared at the other computer are present. I tried to add them, via default icon or even ip from the print and fax preferences, but I get error messages and cannot print.
ON THE mini 2: When I used the 'default printer' icon, both of my printers showed up using bonjour shared and I 'added' them. But when I tried to print, I got a message stating:
*Connecting to downstairs-mac-mini.local on port 631...*
*Unable to connect to printer; will retry in 30 seconds....*
I deleted both printers as bonjour shared and tried to make the printers an ip internet shared, and put in the ip address xxx.xxx.1.2 (mini 1 ip address) but I got a message saying that that ip address was being used. I changed the ip address to xxx.xxx.1.5 (mini 2 ip address) and it looked like it was going to print, but it automatically goes to pause. (doesn't matter which printer it is, I can't print from either. I never did get either of the printers to work on mini 2.
I have done the following: On the mini 1, the printers are marked shared. On both computers the shared folders are marked shared, along with screen sharing. I also added all files on both computers to be shared as to who can read only or read and write.
Also, I have also gone to the 'system' icon and on internet sharing, I have made both computers to be shared, with the appropriate check marks done on the list of services I want shared.
ON both the mini 1 and mini 2 I have set the network to XXXXX Home and it automatically configured and states that my ethernet is connected.
On the downstairs computer, I can see the 'shared computer, and am able to access the files.
BUT on the other computer upstairs, I do see the downstairs computer, but it fails in the connection.
I noticed that the ip address for each computers state the same number, except the last digit is different. xxx.xxx.1.2 for the downstairs mini and xxx.xxx.1.5 for the upstairs mini. The router number and dns server along with the subnet mask are the same numbers between both of the computers.
I am going to set the power settings NOT to sleep when idle so that might help when I am trying to view files on each mini's.
So right now I am stuck with how to make the upstairs mini to print on the downstairs printers, and how to see the downstairs mini on the upstairs mini display.
Any help from anyone is very much appreciated. Sorry this is so long. Thanks in advance!

Mini 1 Allow only essential services
Mini 2 Allow all incoming connections
I changed mini 1 to allow all incoming connections
That did the trick for viewing, now will that help me on my printer issue also? YES! wahoo! Thanks so much, I would have not thought about checking the firewall.
Kudos to you and all your help!

Network and Sharing Center: You are currently not connected to any networks!

This happened all of the sudden, I restarted the system and BOOM!
After noticing the icon with the Exclamation mark at the system tray, there was nothing wrong with communication but the reporting is really messed up!
I've uninstalled the NIC driver and reinstalled it, reviewed services permission and if they are running but still no lucky here...
It's Win 8.1 Pro x64, the computer is member of a domain and I'm surely online, otherwise I could not be writing this post! ;)
Any help would be greatly appreciated!

did you upgrade your Windows 8.1 from XP?
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-not-connected-to-network-but-it-is-shows/873d7474-6149-43bc-a94b-a29ff75afaa7
Check OP reply:
A follow up for anyone reading this. My problem was apparently caused by upgrading from XP and usinging the keep files and settings option. Though there are very limited items brought over from an XP installation, something buried somewhere disabled the
network connections.
To fix this, Windows 8 has a new feature called reset. This basically does setup all over again if you choose the erase files option. You have to enter the product key again when you do this. It is a clean installation. I had to update the graphic
card drivers, add Media Center back in, install the HD Homerun Prime software, run the cable advisor, do TV setup and finally have it working as I had planned.
I suggest try same procedure (if you upgrade from XP to Windows 8.1), choose reset and reinstall back all the drivers

Bios 1.6 and Core Centre Problems!

Hi MSI Buddies!
I have an 875p Neo mobo,
I had problems before where my mobo wouldn't cold boot. I got a replacement board (with bios 1.20) which works perfectly.
I sucessfully upgraded to bios 1.60 last night and the version of corecentre kept stopping my CPU fan !!!! Arrrrggggghhhhh! Can't MSI get anything right (even 6th time round !!!)
I upgraded to 1.0.5.3 version of CoreCentre which fixed the CPU Fan stopping but, the FSB defaults to 203 instead of 200. Everytime i tried to put it back to 200 the PC completely froze !!!! I then ran live update and got the very latest Core Centre which still sets FSB to 203 but i can adjust it without it freezing. But it resets to 203 after a reboot! ANY IDEAS????
The CPU temp stays between 41c and 59c. Is this going to affect my CPU or cause any problems????
Also in the bios, Performance is set to FAST (this was by default).
Is there anyway i can re-flash back to 1.20 bios????
PLEASE PLEASE HELP
T Hatley.

Quote
Originally posted by thatley
Hi MSI Buddies!
I have an 875p Neo mobo,
I had problems before where my mobo wouldn\'t cold boot. I got a replacement board (with bios 1.20) which works perfectly.
I sucessfully upgraded to bios 1.60 last night and the version of corecentre kept stopping my CPU fan !!!! Arrrrggggghhhhh! Can\'t MSI get anything right (even 6th time round !!!)
I upgraded to 1.0.5.3 version of CoreCentre which fixed the CPU Fan stopping but, the FSB defaults to 203 instead of 200. Everytime i tried to put it back to 200 the PC completely froze !!!! I then ran live update and got the very latest Core Centre which still sets FSB to 203 but i can adjust it without it freezing. But it resets to 203 after a reboot! ANY IDEAS????
The CPU temp stays between 41c and 59c. Is this going to affect my CPU or cause any problems????
Also in the bios, Performance is set to FAST (this was by default).
Is there anyway i can re-flash back to 1.20 bios????
PLEASE PLEASE HELP
T Hatley.
Use Corecenter solely for checking speeds/temps.
There were lots of problems with this program so it might still behave weird sometimes. Also take into account you're directly over/under/clocking the system while it's running, you can never predict it's stability.
The 203 FSB is directly caused by the setting FAST in the bios. Those settings regulate different levels of overclocking. Try setting it to slow and tell me what corecenter says the FSB is then?
Regards

2720 and Communication Centre Problem with Contact...

I have a nokia 2720 and Nokia Communication Centre (7.1.62.1).
t connect very good but the contacts are not visible.
It indicate "Cargando contactos" 0% and it not present nothing
Thanks in advance

Aditional info:
XP Professional SP3
Nokia Communication Centre 7.1.62.1
Bluetooth
Thanks a lot

Why can't Apple TV's and iOS devices see home sharing on my Windows 7 computer when iTunes libraries on other computers on the same network and connected to the same Home Sharing can?

I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

Toshiba Connectivity Doctor OR Vista's Network & Sharing Centre results

I bought a 802.11n router to enable to extra coverage my Toshiba with an 802.11n Wireless WiFi Link 4965AGN would give me and I have never seemed to get the extra that I expected! I have tried allsorts over the few weeks I have had the laptop, and was beginning to lose patience and hope of ever getting it resolved, however I have just noticed something which as only confused me even further!
I always use the Connect to a Network/Network and sharing centre within the Vista OS as my control, 'connection status' of my networks etc & it has only ever showed that the network that should be giving me 'n' coverage is a 'g'! However I earlier found and used the Toshiba Connectivity Doctor, and I found it is shows the connection sometimes as an 'n', but still the Vista 'connect to a network & Vista Network and sharing Centre' shows the same broadcasting as a 'g'!!
Which do I take as the more accurate, I have a little extra coverage than when I used to have a 'g' laptop and a 'g' router but maybe in distance an extra 2metres which according to how wonderfully better the 'n' is doesn't seem to live up to the expectation!
Which do I base my accurate coverage results on, the Toshiba Connectivity Doctor or the Vista Network and Sharing Centre, they can both be open at the same time and showing the different results? I can't understand why they tell me different things???? Crikey it??s driving me crazy!

Hi friend,
did you ever tried the INTEL drivers?? Theres an special site just about your wireless card, so please, visit that site and download the drivers from there:
http://support.intel.com/support/wireless/wlan/4965agn/
Maybe its just an driver related problem. And another suggestion: use just one program to connect to the wireless networks. Maybe they cause some system-internal conflicts which disables the n-capability.
Oh, and dont forget to check the device manager/network properties on some technical settings. Maybe it must be explicitely enabled, do this also on your router.
Greets

I am trying to get my airport extreme to extend my telstra 4G wi-fi network , and i have turned sharing on, but have no green light on the capsule.

i don't know what i am doing wrong and have tried to follow instructions on the discussion page , set up extend network and shareing on, but i still don't have a green to go on the base station, and either have to be on my 4G telstra network , or back into wi-fi and tick time capsule network. one or the other. i don't understand a lot of this stuff .

leanne5725 wrote:
I have a telstra modem/wireless thingy. Unsure what you mean by using the Apple router as AP only (what do you mean by AP).
AP is access point.. ie wireless point to access the network.. also called WAP.. wireless access point.
Also I keep getting a message saying (PROXY error - the proxy server received an invalid response from an upstream server. The proxy server could not handle the request) - then I go back out, then back in a few times and it works. Also, a box keeps coming up saying (bad gateway), but Ive never had a problem before I had this apple computer.
It is just today.. some proxy has been fixed.. openssl updated?? Anyway.. it is fine now. I could not get on this site at all for the last few hours.. same issue.
What Apple routers do you own now??
You can plug it into the TG797N (wan on apple router.. to LAN on Telstra router) and run it in router bridge..
And create a wireless network..
Then connect your clients to the Apple wireless instead of the TG797N wireless.

8700r network and software problems

Is anybody else experiencing network and s/w problems with their 8700 series? It's June 2008 so I accept that my 8700r handset is 18-24 mths old but in the past 2 months I've had the following problems:
- screen reads "You are not currently in an area that can handle data communication" or screens time out before refreshing even though i'm downtown, towers all around me, and the antenna is on
- my facebook app didn't work for 2 months, showed as a blank screen, and has only this week started working again (i'm guessing they released a new version that didn't support the 8700r at first so i had to wait for a patch)
- unit just shuts itself off then comes back on seconds later
Is there a s/w upgrade I'm missing?

Its possible that your device is slowly failing. I would try backing up your BlackBerry and performing a wipe. Finally restore your data or reactivate. To wipe your BlackBerry go to Options > Security Options > General Settings. Press the scroll wheel and select Wipe Handheld. This will delete all personal data but leave any installed applications. If that doesn't work you could try reloading the OS. If that also fails they you probably need to get a replacement.

IP device tracking and idle timer problem

Hi,
We are deploying 802.1X in our network and have encountered problem with a type of payment terminal.
The problem is that the terminal do not 'speak' to the network after the first initial DHCP request, the terminal waits for incoming packets from a counter to start the payment process. After the idle-time the MAC is flushed from the switch and the port is not authorized any more.
To solve this we set 'authentication control-direction in' on the port and use 'ip device tracking' to keep the client on the network, ip device tracking sends an arp request every 30 seconds to clients.
Our ISE is sending Radius:Idle-Timeout = 300 and the timer start to count down when the client is authenticated.
In Wireshark, I can see that the ARP request is going out and the ARP reply coming back in but this does not update the inactivity timer for the client. So after 5 minutes the port is gone, and there is no way to get the port up again from the network. Traffic from the client brings up the network.
This looks like a bug to me, anyone seen this, or a similar behaviour?
Running:
ISE 1.2p6
IOS 12.2(55)SE6
From Trustsec 1.99 Wired 802.1X Deployment Guide:
Tip Enable IP Device Tracking with inactivity timers to keep quiet endpoints connected. When IP Device Tracking is enabled, the switch periodically sends ARP probes to endpoints in the IP Device Tracking table (which is initially populated by DHCP requests or ARP from the end point). As long as the endpoint is connected and responds to these probes, the inactivity timer is not triggered and the endpoint is not inadvertently removed from the network.
From CLI output
SW03#sh auth sessions int fa0/4
            Interface: FastEthernet0/4
          MAC Address: xxxx.xxxx.5289
           IP Address: 10.10.10.64
            User-Name: XX-XX-XX-XX-52-89
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-auth
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
      Session timeout: N/A
         Idle timeout: 300s (server), Remaining: 2s
    Common Session ID: 0A17BD07000000A925152A7B
      Acct Session ID: 0x00000458
               Handle: 0x090000A9
Runnable methods list:
       Method   State
       dot1x    Failed over
       mab      Authc Success
SW03#
SW03#
SW03#
SW03#sh auth sessions int fa0/4
            Interface: FastEthernet0/4
          MAC Address: Unknown
           IP Address: Unknown
               Status: Running
               Domain: UNKNOWN
       Oper host mode: multi-auth
     Oper control dir: both
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0A17BD07000000AA251A0019
      Acct Session ID: 0x00000462
               Handle: 0x800000AA
Runnable methods list:
       Method   State
       dot1x    Running
       mab      Not run

Here is the port config.
Just to clarify, everything is working except that the terminal is losing the authentication. The terminal works again if traffic is initiated from the terminals menu, like with ping.
interface FastEthernet0/4
description Standard
switchport access vlan xxx
switchport mode access
switchport block unicast
switchport voice vlan xxx
switchport port-security maximum 2
switchport port-security
switchport port-security aging time 5
switchport port-security violation restrict
priority-queue out
authentication control-direction in
authentication event fail action next-method
authentication event server dead action reinitialize vlan xxx
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
authentication violation restrict
mab
no snmp trap link-status
dot1x pae authenticator
dot1x timeout tx-period 5
storm-control broadcast level pps 100
storm-control multicast level pps 100
storm-control action trap
spanning-tree portfast
service-policy input users

Network and Sharing Centre problems (again)

Similar Messages

Maybe you are looking for