Network assistant security password??

sorry to be a bother, i found my G3 all in one at a thrift store. did a clean resinstall of OS 9.2.2. i am having trouble connecting to my home network. when i try to access the network assistant security ask for a password and says consult the manual. i dont have one. does anyone know the password or how i would find it??
thank you in advance
iMac G3 pc Mac OS 9.2.x

What Router are you attempting to connect to? Wired or wireless?

Similar Messages

Cisco Network Assistant, Enter Password for each device

Does anyone know a way that when you open a community you have to enter your username and password for each device listed in that community? I know with it currently you enter your username and password one time for each device, but I want it to prompt mne for username and password for each device in the community. I unchecked "Encrypt and Store Device Credentials" and it still only prompts me one time for a username and password.

Hi,
We tried reproducing it in our local set up and we also analyzed the problem with respect to the expected behavior in CNA.
Could you please share some more details as mentioned below so as to provide you the exact solution.
1) Is the same set of user name and password used for all the devices?
2) Was the password store feature enabled while creating community and was disabled later?
Regards,
Pramod

How can I add a security password to an Airport extended network?

I have an Airport Extreme network extended with an Airport Express and an older Airport Extreme. Everything works fine as is. I want to add a security password to the network but when I do, the two extending base stations appear in Airport Utility with an alert triangle next to them and when I select each of them, it asks if I want to "foget" that device. I do not want to forget those devices as they are extending the range of the network, I just want a password on the entire network for privacy. How do I accopliish this while still maintaining the extended network?

Conversely, set the security feature for each of the extending base stations first, then set the security for the main base sation. The extending base stations will go offline. Then back on once the main base station is configured with the same password as the two extenders.
(Found this on an older post about the same issue.)

Unable to connect to 5ghz network band with security/password

Hi, I've recently set up a 5ghz network band on my router. The problem is I can't connect to it while it has password enabled. However, I am able to connect while it has no security/password. I would like to connect to the router using some kind of security or password
I am using a Netgear Router WNDR3400v2.

You need to contact Netgear for support, it's their router they would probably know how to support it best.

Applying security password to unsecured wi-fi network

how do i apply security password to an unsecured wi-fi network apple mac pro 10.9

You do it on the router.

Network security password

Hi,
I have a wireless network set up with an old base station (g standard). The network has no password for security associated with it - anyone can access it. How do I go about adding a password?
Thanks!

To set up wireless security on the AirPort Extreme Base Station (AEBS), either connect to your AEBS's wireless network or connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Utility (found in /Applications/Utilities), try these settings:
Change Wireless Security
o Wireless Security: <40-bit WEP | 128-bit WEP | WPA Personal | WPA Enterprise>

What's the username & password when i connect device from cisco network assistant

what's the username & password when i connect device from cisco network assistant?
http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

Although that may be true...
If I click the "Connect As..." button it asks for a username and password.
I've experienced connecting to other user's computers on a network. To gain access to their computer, I just use their username and password. I've done this before to transfer files without using a flash drive or burned disk.
I'm trying to find out what I'm supposed to log on as to gain access to this device...
My point is that yes, I'm connected to it by wifi. Otherwise it wouldn't show up; ha-ha!
Is my point really that hard to grasp?

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

Answered this question with a reply from "how does an iphone forget a network" response

I am having trouble connecting to wifi networks that are password secured, even though I know the passwords.

hey guys,
Ok so here is the problem. I am having trouble connecting to wifi networks that are password secured. I am able to connect to public wifi with no problem, but when networks have passwords on them I am unable to connect to them, and I know that passwords. I also know that i am putting the correct passwords in because I am able to connect to the networks on my computer. I have tried turning my phone off and then back on, turning the wifi off and then back on and even resetting my network passwords to no avail. The networks that are secure show up in the wifi list for networks but when I go to put the password in, it tells me "incorrect password for the network". It has never connected to it since the passwords have been put on it. I am out of ideas for trouble shooting. Can anyone else help?!

Try a soft reset by holding in the power button and the home button in at the same time for about 15 seconds until the screen flashes and then goes completely black. Afterwards try and turn the phone back on and see if that works. Also you could try and reset the Network Settings by going to Settings--General--Reset--Reset Network Settings and see if that resolves your problems as well. If all else fails be sure and do a backup through ITunes and then try to restore the device. Hopefully all will be well now.

Being able to view my WEP wirless security password.

Hello
I can't seem to find where to view my wireless security password. It is a wep 128 bit. When I click on the lock. I get a password assistant that doe not make sense. I would think if I click on the lock I could put my base station password in and then it would let me view the wep. I have gone to the keychain but can't find the wep password.
Any help would be appreciated
Thank You

Tried to make this clear....
On the Base Station menu *(top of screen near the Apple icon),*
Click Equivalent Network Password
The top of your screen is the area where you see the Apple icon, airport icon, date, time etc.
It sounds like you are looking at the window in the center of your screen.

Network Assistant and TACACS+

The Network Assistant Guide 5.4 states the following:
You must have privilege level 15 to access Network Assistant through TACACS+ or a RADIUS server
We do not want to give certain users prvilege level 15 (read write) access. Are there any other options when using TACACS+?

Paul
What would you want to do for authentication if the TACACS server is down? For telnet and console access you can use line as the backup method since it is possible to configure a line password on the console and on the vty ports. What kind of backup method do you want for HTTP? The one that makes most sense to me would be to do local authentication to cover the situation where the server is down.
To use local authentication you will need to do the following things:
- create a local user definition (perhaps several if you have extensive security requirements).
- specify a special method for aaa authentication.
- specify that http use the special method.
The configuration might look something like this:
user tech1 password tech1
aaa authentication login http_auth group tacacs+ local
ip http authentication aaa login-authentication http_auth
Or you could decide to use the enable secret (or password depending on which is configured). The config might look something like this:
aaa authentication login http_auth group tacacs+ enable
ip http authentication aaa login-authentication http_auth
If you want some other backup method let us know what it is and we will see how it could be implemented.
HTH
Rick

Is there any way to set up an Airport Extreme that had been previously used in a password protected network and the password was not provided by the seller ?

Background -
My original Airport Extreme Base Station failed (would not connect to the modem). I purchased a similar, if not identical base station on eBay. Unfortunately, the purchased base station apparently was used in a password protected network. For what it is worth, my son gave me a Netgear wireless router, but it leaves a lot to be desired. For one thing, I use to keep the cable modem in the basement along with the Airport base station, with a printer connected to the USB port. The Netgear device does not have a USB port and also requires that the computer (in this case, the eMac) used to set up the network be connected to one of the ethernet ports. This meant I had to move the cable modem and router into my bedroom, a very undesirable situation. It then occurred to me that the original Airport base station Wi-Fi function might still work, and tested this hypothesis and sure enough, the Wi-Fi function does indeed work I currently have both base stations powered on, with my printer connected to the original. Both base stations appear under my Network icon, but neither Airport Utility 5.4.2 or Airport Administrator Utility 4.2 see either base station. I can select the original base station as my network, connect to the printer or even my other computers, but as soon as I try to select the new one, it asks for the password. I would like to somehow reset this base station and then redefine the network name and encryption.

I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

T61p - Please wait while Windows configures Client Security Password - Manager

My T61p system is fully updated, however I continue to get "Please with while windows configures Client Security Password - Manager." and then the computer trys to install
css_manager_vista_tpm.exe
over and over again.
What is the problem here and how can I solve?
How can I contact Lenovo-Thinkpad to assist?
The problem has reoccured even after I did a system restore to an earlier date.
It seems to initiate when I first boot up and then open up "Pictures"
Please help.
Thanks

Well, I take everything back. After removing all password entries and re-installing/rebooting, it worked for a while. But now it is doing it all over again. I tried to call techincal support, but they then said I would have to pay for software support and they only support hardware, and to re-install the OS. Great, jeez, I couldn't have tried that myself, and that is so simple and takes no time at all (detecing sarcasm yet?)
I do a lot of work for large corporations that are watching the IBM=>Lenovo takeover very closely to see if they are going to drop Thinkpads altogether and go with another laptop vendor. This type of weak support does not bode well. The person I was on the phone with was rude, hard to understand, and even told me there was no place to escalate the call to.
There is no replacement for customer support. It is sad to see no Lenovo involvement in this forum, and don't make the mistake of thinking this is an isolated problem at this time. It is growing.
Though Thinkpads are great Laptops, Toshiba used to have the market, but their support or should I say lack of it led to their downfall and position of leadership loss.
It will be no different if Lenovo continues to act like a machine churner.

Client Security Password manager not working

Hi All,
Have a T500 (model 2081CTO) running Win 7 Prof, with fingerprint reader. Had installed and had working Enhanced Client Security, was web aspect of capturing / prompting userids and passwords just fine.
Needed to reset IE8 to default. That stopped Client Security Password web aspect.
Uninstalled then re-installed & setup Enhanced Client Security. Had backed up / reinput password list.
*** Web aspect of capturing / prompting userids and passwords is not working ***
Not being prompted to save a userid / password
A known userid / password is not being entered into what should be a known site.
Doesn't even seem as if enhanced client security is running - no icon in system tray. Yet Client Security Solution shows it enabled.
What / How do I get enhanced client security to again start, prompt to save userid/password and to reinput for a known site?
Obviously not keen to wipe machine and start again...
Am also really hissed that I cannot ring Lenovo Support and actually talk to someone about this!
Thanks for any meaningful suggestions and assistance.
Les
Solved!
Go to Solution.

open password manager in the set preferences make sure IE box is checked in IE 8 click on the tools option the lenovo password manager should be there & in the manage add ons make sure it is enabled
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Cisco Network Assistant, unable to add a switch

I have a network running some 20 switches, two controllers and many AP's. All the devices that should be able to connect to cisco network assistant can successfully. However there is one switch that will show in neighbours but will give the message of “unable to connect to device” when I try and add it to the topology.
As far as I can see the config is identically to all other similar switches in the network. I can telnet from a switch (management VLAN) to the switch in question. However when I try to ping or telnet from the PC running network assistant (different subnet) I am unsuccessful. However I can ping/telnet to all other cisco device from this PC.
The switch is a WS-C3560-48TS and I have included the config for firstly the switch in question and another switch of the same model and config that works correctly. Any help would be greatly appreciated, thank you.
sho run
Building configuration...
Current configuration : 7363 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_1
enable secret 5 $1$Fn0U$2rG6DadA8JSUzQzSNmMc4/
enable password 7 1511021F0725
username dis privilege 15 secret 5 $1$b3d.$S43CM1xtXyEtO5Rsil6Bn1
username admin privilege 15 password 7 0811185C224C543341
no aaa new-model
ip subnet-zero
ip routing
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP05 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP06 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP07 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP08 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP12 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP13 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP20 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description ### Connected to Parkside-AP21 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description ### Connected to Parkside-AP36 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to WC2A_Core_Switch ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_2 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.31 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 144711185D07
logging synchronous
login local
line vty 0 4
password 7 144711185D07
logging synchronous
login local
line vty 5 15
password 7 094F471A1A0A
no login
end
wc3_switch_2#sho run
Building configuration...
Current configuration : 7239 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_2
enable secret 5 $1$Sfoj$a6AdO7PI0bP8ERhpWl3OP.
username dis privilege 15 secret 5 $1$D9c6$16yFzETOxBNHiPdTEqkxQ1
username admin privilege 15 password 7 133543002059550E78
no aaa new-model
ip subnet-zero
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP24 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP27 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP28 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP30 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP31 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP32 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP33 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description *** Curric4 VLAN Port ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to wc3_switch_1 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_3 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.32 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 135514015A0F
logging synchronous
login local
line vty 0 4
password 7 135514015A0F
logging synchronous
login local
line vty 5 15
no login
end

The switch configurations look pretty straightforward and mostly correct.
I notice that the problem switch has "ip routing" global command. Why is that necessary? You are only using it as a L2 switch, yes? If you use "ip routing" and have no routing process (ospf, eigrp, etc.) running you would need to add a static default route (ip route 0.0.0.0 etc.) and not use the "ip default-gateway" command. Otherwise the switch itself (the SVI) does not know how to leave the management VLAN routing-wise since it is the only L3 interface defined.
(I might also add "ip http authentication local" on each and I'd definitely disable telnet in favor of ssh)

Network assistant security password??

Similar Messages

Maybe you are looking for