Network between imac 10.7.5 and imac 10.5.8

We've got a pair of imacs here at the office. The "new" one is a 2,7 i5 running Lion 10.7.5 and the older is a 2,66 intel core 2 duo with Leopard 10.5.8.
We can access - on our gigabit ethernet - the newer imac from the old one, but not the opposite.
Can someone help us on this?

You will need to upgrade OS X on the older computer to have two-way file sharing. Start by seeing the following. You should begin the process by first buying and installing Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Similar Messages

Networking between iMac 350 OS9 & G3 450 OSX?

Hello,
I recently acquired a used iMac 350mhz 7gb 128mb which currently has OS9.2, I've just tried networking between the iMac and my G3 450mhz which is running OSX tiger, not working.
Q- Can I upgrade the iMac to OSX tiger? If so how? I'm sure then my router will acknowledge the iMac.
Thanks.

Hello and Welcome to Apple Discussions.
Officially the iMac 350MHz will only support OS X up to 10.3.9. The iMac 350MHz only has a CD-ROM drive and as Tiger comes on DVD by default this is another hurdle. Panther comes on CD.
Before you install any version of OS X it is vital to update the firmware: 4.1.9 (link).
128Mb is the bare minimum for OS X and really needs more. Sticking a 512Mb DIMM with one of the 64Mb ones would be ample.
7Gb is not a large drive for Panther so you'd want to de-select the 'Languages' and 'Printer Drivers' options during the install to save a little more space.
Subsequent networking would be far far simpler.
regards
mrtotes

How to Set Up Network Between IMAC and Windows XP

Hi
I have a new Imac 27 inch in my study and a PC running Windows XP downstairs - I don't know how to set up the PC and when I phone apple support they could only tell me how to file share from the IMAC end - would be grateful for some help

First of all, it is easier if your Windows user has a password, it may not be the case, if not, you should set one.
Then check your firewall settings. if it is activated, go to your network connection's properties, choose the Exceptions tab, and check "File sharing" so that it will no longer be blocked.
From now on, you should be able to connect to your computer from the finder.
Choose Go > Connect to server
Then in the address, type smb://ip.address.of.windows/ and OK
after a short time, it will prompt you for your username and password, and you should be able to access your Windows resources.
If your Mac and Windows are in the same workgroup (set in computer properties in Windows, and in Network properties in Mac) it will appear in any finder window side bar.

Networking between iMac and Windows / iTunes problem

Hey Guys,
I've recently got an iMac 27" i5 and I'm having a few issues with the networking performance. I'm using the gigabit ethernet port (AirPort is off) into a gigabit switch. Also plugged into the switch is a Windows Home Server (WHS) machine also with a gigabit connection.
Both my iMac and WHS are showing on the switch as being connected at gigabit speeds. I also have Parallels 6 installed on my iMac so I can test the performance of Windows 7 on the same hardware (albeit with the overhead of the virtualisation layer). In parallels the networking is bridged onto the default adaptor rather than being shared.
iMac file copy
iMac ftp from WHS 4.81 MiB/s
iMac Parallels Windows 7 ftp from WHS 4.5 MiB/s
I also have constant problems with iTunes locking up, hanging, showing the spinning wheel (all my media is on the WHS machine).
Does this sound correct or should I be getting better performance than this?
Thanks
James

gsaab wrote:
As a relatively new Mac user I'm not sure how the networking function works. I have a large iTunes library... 150GB+. What I'd like to do is to keep the library on my iMac, but be able to access it using a MBA.
have you considered using _*Screen Sharing*_ ?

Setup a wired network between Time Capsule, Airport Extreme and Express

I currently have a Time Capsule, Airport Extreme N and an Airport Express N. They are currently connected wirelessly via the "extend network" mode. So I do have wireless connection throughout my home but I notice that it is slow especially compared to gigabit Ethernet. I now like to do the same but then connect the three devices over Ethernet as I have on each floor also Ethernet connections available that are connected via a wired switch.
How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?
I have one Internet connection that comes via Ethernet from my cable modem. This is now connected to my time capsule who creates the internal network and assigns internal IP addresses.
Can anybody advise how to configure each device? And to which ethernet port I should Airport Extreme?
Thanks
Alexander

Welcome to the discussion area, Alexander!
+How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?+
You will be setting up what is known as a "roaming" network using the etherent backbone for your network. This will produce the best possible bandwidth on your network for both ethernet and wireless connections.
_On the Time Capsule_
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Remove the check mark next to "Allow this network to be extended" (This is only checked if you are extending your network using wireless only and you will be using ethernet to connect your devices, not wireless).
Update to save changes and the Time Capsule configuration is complete.
_On the AirPort Extreme_
Connect an ethernet cable from one of the LAN <-> ports on the Time Capsule to your ethernet switch. Then connect another ethernet connection from the switch to the WAN (circle icon) port on the AirPort Extreme.
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode = Create a wireless network (Not extend as you might think. Extend is only used if the Time Capsule and AirPort Express are connecting using wireless only)
Wireless Network Name = Exact same name as your AirPort Extreme wireless network
Radio Mode = Same setting as your AirPort Extreme
Channel = Automatic
Wireless Security = Exact same setting as your AirPort Extreme wireless network
Wireless Password = Same password as your AirPort Extreme wireless
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save changes and configuration is complete
_On the AirPort Express_
You can connect an ethernet cable from the switch..or..from one of the LAN <-> ports on either the Time Capsule or AirPort Extreme, whichever is easier.
Set it up exactly the same as the AirPort Extreme above and update to save changes.
Power off the Time Capsule, AirPort Extreme and AirPort Express for a few moments. Then power up the Time Capsule first and let it run a moment, then power up the AirPort Extreme and then the AirPort Express.
If you have a laptop running Leopard or Snow Leopard, you can move your computer around and check to see which device it is connecting to for wireless. Hold down the option key while you click on the fan shaped AirPort icon at the top of the screen and look for the BSSID. That is the AirPort ID of the device to which you are connected at the time.
To get the AirPort ID of each of your Apple routers, open AirPort Utility and click on a device on the left. On the right, you'll see the AirPort ID for that device.
For ethernet connections, you can plug into an available port on the switch, the Time Capsule, or the AirPort Extreme.
You should be all set. Please post back on your progress.

Windows network between 7 and 8?

I have been trying for a couple of hours to set up a home network
between a computer running 7 and one running 8. I looked online
to see what came up when I searched=
"Windows cannot set up a home network on this computer".
I found several responses saying 7 can only talk to 7.
Does anyone know if there is a way for 7 to talk to 8?

Hello squareorbit,
Do you mean that you want to use the Windows 7 and 8 to create and join a homegroup?
Do you use Windows 7 or Windows 8 to create the homegroup?
Based on my test, I can use the Windows 7 and Windows 8 in homegroup.
As you get the message ‘Windows cannot set up a home network on this computer’,
Please take the following steps for troubleshooting:
1. Download and run the fix it wizard
2. Change your network location to Home network
3. Check if you start the service Peer Networking Grouping
and HomeGroup Provider
For more information, please take a look at the following article.
http://windows.microsoft.com/en-hk/windows7/why-cant-i-create-a-homegroup
Please refer to the following article to create a HomeGroup in Windows 8.
http://windows.microsoft.com/en-HK/windows/homegroup-help#homegroup-start-to-finish=windows-81&v1h=win81tab2&v2h=win7tab1
Then you could make Windows 7 join the HomeGroup.
http://windows.microsoft.com/en-hk/windows7/join-a-homegroup
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

Printer and Network connection between imac and PC (Wireless)

Hi All
I Have connected successfully to the internet via my imac through airport as has my pc through a wireless network card. But my problem is sharing files, networking between the two computers, it doesn't want to happen!!
And i am unable to print through the imac, the printer is linked up to the PC via a USB. The imac and PC are both connected to a wireless router/modem.
Would like some advise on these issues. Any suggestions welcome!
Cheers.

Everything I know about a mixed Mac/PC network, I learned from iFelix and Joel Shoemaker. They both have fabulous sites that go through the process step-by-painful-step.
As far as the printer sharing goes, it took me a while to get it right, but I ended up using both the files found here and got it to work. Of course it was an HP printer, but there are others located here for other brand printers.
Good luck and let us know how things turn out.

Beginner question: Can I create a hybrid home network between an ethernet-connected iMac and an airport connected Macbook Pro using a hybrid router?

I recently acquired an friend's used iMac, I don't know anything about networks and all I can find is how to create a Wi-Fi home network but nothing about hybrid Ethernet/Wi-Fi networks.
I have the iMac connected via Ethernet to the wireless router.
I connect via Airport with my MacBook Pro
I would appreciate if anyone has any pointers as to how I can start setting up a network between my ethernet-connected iMac and WiFi connected Macbook.
Thanks!

ethernet and airport/WiFi are just transmission media for the same network. If you can get internet on both computers, they are networked. Using the same router = same network.
So now, what is it you want to do? Share files between them?
http://support.apple.com/kb/ht1549
http://gigaom.com/2008/09/26/mac-101-sharing-files-between-2-macs/
http://apple.stackexchange.com/questions/62450/how-to-share-files-between-two-ma cs-at-home

Trouble using AirPlay between iMac and AppleTV

I'm running OS X Lion 10.7.5 and I'm having trouble using AirPlay between iMac and AppleTV (2nd Gen). It used to work fine, but for some reason it just stopped responding. I can see my media on my iMac from AppleTV and I can see AppleTV from my iMac when attempting to use AirPlay. However, when I try to pull or push media from my iMac to AppleTV it just stalls and never loads. AirPlay works fine from my iPhone and iPad with AppleTV - it's limited to my iMac only.
I'm using a Netgear R7000 wireless router and a Netgear AC120 WiFi Extender and as such, I have 4 available wireless networks (2 from the router and 2 from the extender / 2 - 2.4 GHz and 2 - 5 GHz). My internet access is great and my network performance is good across the board. All of my software/firmware is up to date (iMac, AppleTV and router/extenders). I've tried all combinations (mixing/matching) all of my wireless networks between devices (iMac/AppleTV) - nothing makes a difference (again, AirPlay works fine between my mobile devises/AppleTV). Netgear Genie has been making changes to my network settings as new firmware has been installed in both the router and extender. I'm guessing there is something screwy going on with the network settings on the iMac, but I can't figure it out.
Anyone have any suggestions?
Thanks!

I'm glad you got it all working. Out of interest, how do you (or your son) connect to the internet now? Is it just a dial-up connection? If it is, I am sure you know that, even if you get the Apple TV to share the connection, the speed will seriously limit the use of many of the Apple TV's features.
The Airport Extreme is a great router but you will need a DSL or cable modem as well as it won't connect to the internet without one. There are many great (and cheaper!) combined modem/routers available if your son wants to get a high-speed network up and running at lower cost. Any other computers, phones, games consoles etc that you may have in the house can then all connect easily.
I hope that I have helped a little and I will look out for future posts in case I can help again.

Connection failures between iMac and Macbook Pro

I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
OS 10.9.3 on both machines
Apple Airport Extreme Time Capsule
iMac, 3.06GHz i3 (2010)
Macbook Pro Retina, 2.4 GHz i7 (1st Gen)

Hi jt in nyc,
Some checks:
Use Airport Utility on one of the machines
- Click on the Time Capsule ( enter password if prompted )
- Click on the Edit button
Under Airport Utility -> Wireless -> Wireless Options
Are the Time Capsule Wireless options set correctly?
- Country -> you know this, change if it is not
- 2.4GHz and 5GHz Channel set to Automatic
- Click on Cancel button to return to the Airport Utility graphic diagram.
- Click on the Time Capsule
- Click on your machines listed beside wireless clients
Are the machines reporting an excellent quality at different distances from the Time Machine?

Why My IMAC OS X 10.6.8 Become Slow On The Network Between Window Server 2008

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

How can I exchange my whole data between my mac book pro and my iMac?

How can I exchange my whole data between my mac book pro and my iMac?

i use both, the macbook at work and the imac at home, but ineed to have the same data on both macs, how can i sync them?

Best way to transfer data between iMac early 2006 and iMac late 2012

What is the best way to transfer data between iMac early 2006 and iMac late 2012?

HI, is this for Migrating all data ove, or just File Sharing?
What OSX version is in he older one?
Do you have any backup external drive for the older one?

Network between imac 10.7.5 and imac 10.5.8

Similar Messages

Maybe you are looking for