Network Card Driver

Hello Dear All,
I am new to Solaris 10 and I wud like share my problem with you guys.
I have installed solaris 10 on my intel x86 machine. It's working fine. Only the issue is with Network Card.
Following is My Hardware Profile...
Mother Board :- Intel D945GCR
Onboard Lan :- Intel(R) Pro/100 VE Network Connection.
Externel Lan Card :- Silan sc92031 PCI Fast Ehternet Adapter.
The above mention LAN cards are not getting installed and I have 64 bit Kernel and drives are of 32 bit.
So kindly Help me to get correct driver and patch of Solaris10 for the same, as i had done lots of google but, I am not able to identify the correct one.
Thanks lot to all for all your kind guidance and support in Past and Future.

Hello Dear All,
I am new to Solaris 10 and I wud like share my problem with you guys.
I have installed solaris 10 on my intel x86 machine. It's working fine. Only the issue is with Network Card.
Following is My Hardware Profile...
Mother Board :- Intel D945GCR
Onboard Lan :- Intel(R) Pro/100 VE Network Connection.
Externel Lan Card :- Silan sc92031 PCI Fast Ehternet Adapter.
The above mention LAN cards are not getting installed and I have 64 bit Kernel and drives are of 32 bit.
So kindly Help me to get correct driver and patch of Solaris10 for the same, as i had done lots of google but, I am not able to identify the correct one.
Thanks lot to all for all your kind guidance and support in Past and Future.

Similar Messages

  • What API i can see network card driver name

    Dear all
    in java i/o evirnment what API I can use to call current machine network card driver name?

    Well the first step for you is to look through your Windows documentation to see what the library call is to get the information you want. Can you find that and post what you find, and post the full signature of that library call (ie, arguments and return type)?
    In other words, here's what you should do: Write a simple C program that gets just the information you are looking for. How that works is outside the scope of JNI, so it's outside the scope of this forum, but once you get that working, post some info about it and I'll explain how to get that linked in with JNI. The good news is, it's easy to do.

  • Hi their is a code 10 error appears on my network card driver please guide me how i can fix that....

    I have Thinkpad T41 As my network card drive installed after installation the driver the system suddenly shows "This device can not start (code 10 Error) Please guide me how i can fix it

    Hi VanessaLovery,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your notebook works fine on battery, but performs poorly on AC ,after taking it to a repair shop to have it cleaned.
     Here is a document on Troubleshooting an Overheating and Auto Shutdown Issue.
    Have you checked your performance plan to ensure it is set to balanced  Managing Power Options (Windows 7 and Vista).
    Have you tried a different electrical outlet?
    Are you using the AC adapter that came with your notebook?
    On startup if you press the F2 button approximately once every second, you should be able to enter the HP advanced diagnostics window, to test for hardware failures.    Testing for Hardware Failures (Windows 7, Vista).
    If you would like further assistance would you please provide your exact model of DV 6 and the Operating System you are running.  How Do I Find My Model Number or Product Number.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Realtek PCIe GBE network card driver for Solaris10 x86

    Hi Gurus,
    My laptop has a Realtek PCIe GBE network card but I could not find the driver for Solaris10 x86 anywhere, can anybody help me with this issue?
    Thanks

    how about this?
    http://homepage2.nifty.com/mrym3/taiyodo/eng/
    other google hits indicate that there is a realtek driver in OpenSolaris.

  • Network card driver install

    i have solaris 10 installed on x86, and the OS cant see the network card,how can i install the network card

    Same answer as the very first response in this thread:
    (from the Solaris-on-x86 forum)
    http://forum.java.sun.com/thread.jspa?threadID=5188790

  • Virtualbox Win 2000 network adaptor driver

    Hello,
    Looking for some advice. I got a new job, and was able to convince them to let me use a Mac versus the typical corporate dell setup. So i got a spiffy new 13" MBP 2.4Ghz.
    So everything is working fine, but I need to run a business application that runs on windows only. Since it's an information database, I need to access it via a virtual Windows pane, instead of going with Bootcamp, which I have running with no issues on my personal MBP. So we opted to use Virtualbox since it's a free solution. The IT guy installed VB along with Windows 2000 since they have licenses lying around, but they couldn't get the network card driver working.
    My question to the community here, running the same thing, is what network driver should be used for VirtualBox with Windows 2000 as the guest OS?
    The IT guy is a part time contractor so he's not doing alot of effort in finding out.
    I appreciate any suggestions and pointers.
    thanks,
    Ken

    Okay, so the oracle boys directed me back to the virtualbox page, since they don't have a real tech support to call. But I was able to locate an answer from one their forum moderators.
    For anyone that may come across the same issue, here's what you do.
    having the guest OS (windows 2000) shutdown, go into VB Settings, then Network, and Select "NAT" under the 'attached to:' drop down box. And the the Adaptor Type (driver) under Advanced should be kept as PCnet-FAST III.
    thanks,
    ken

  • HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    uhm hey guys,
    idk where else to get help so ima try here,
    i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
    do you know what i should install ?
    but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
    Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

  • LAN Network Card Ethernet Driver

    Computer Crashed, Vista.  Loaded Windows 7, Realtek PCIe FE GBE Family Controller Series Driver will not load on Windows 7.
    Is there a driver for this Network Card for Windows 7 ?

    Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
    - Peter

  • Replacement wired network card and driver for G4/OSX 10.3.9???

    Does anyone know of a wired network card that will work in a Mac (with or without a driver) when the one on the mother board is not longer functioning? It seems that my built-in Ethernet card was fried in a recent electrical storm and I'm looking for a replacement so I can connect to the internet again. My cable internet modem and cables were replaced after the storm and have been determined to be in working order.
    No theories, please -- I'm looking for a proven solution.

    Hi
    I found the Kingston KNE100TX (NB not KNE110TX) to be satisfactory in my B&W G3.
    Drivers required and available from Kingston up to OS9. No drivers required for OSX. See
    http://www.xlr8yourmac.com/OSX/osx_networkcards.html#kingston
    (There are other reports in this linked page but my experience is with the KNE100TX)
    Best wishes
    John
    G4 Quicksilver/733/1GB/80GB(ATA)+18GB(SCSI)   Mac OS X (10.4.7)  

  • What are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air

    what are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air?

    "Memory" in this case means RAM, the working space for the processor in the iPad. It is different from storage space, the latter being what is referred to by the "32GB", "64GB" etc. specification.
    Regards.
    Message was edited by: varjak paw

  • Driver for Network Card

    Hi:  I put a hard drive from a working R50 loaded with
    XP and other software into my T42 and of course
    XP notices there is a network card it doesn't have a
    driver for; It's got the driver from the R50 it used to
    live in. Which driver(s) do I need?   Thanks

    Your T42 only has two network adapters, one for Ethernet, the Intel Pro 100/1000 you say is installed, and the second one is for your wireless, the Intel 2200bg with the latest driver here.
    But you are much better off downloading the Thinkvantage System Update (TVSU) from here and then letting TVSU update all your drivers to the current level.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Satellite A500-15N: Can't find Network card XP driver

    Hi everyone,
    I've just blown away vista on my new A500-15N and installed XP + SP2.
    The install went OK but I now have some issues with certain devices not working.
    They are: 3 x Base System Device's, 1 x Ethernet Controller, 1 x Network Controller, 2 x PCI Device's, 1 x SM Bus Controller, 1 x Unknown device and 1 x Video Controller (VGA Compatible).
    I thought I would be able to load some Network card drivers to enable access to the internet and then be able to download everything else, either automatically or manually. But I can't get any network card drivers to load!!!!!!!
    After loading some from the Toshiba web site, it didn't make any difference.
    I deleted and then autodetect the network card from device manager but I cannot find any of the installed drivers to get it working.
    Does anyone know what I can do to cure this or any of the other issues?
    Thanks
    MrAngry

    Hi
    Do you need the LAN or Wlan card driver or both drivers?
    As far as I know the LAN card chip is from Realtek (1GB/s) and the WLAN is Intel 5100AGN.
    The WLan driver can be found here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Intel PRO/Wireless 3945/4965/5100/5300
    The LAN driver can be found on the Realtek page:
    http://www.realtek.com.tw/
    You can check the Toshiba European driver page. Other notebooks series uses the same Realtek LAN card and the driver should run too.

  • Network Card XP Driver Configuration

    I've installed winxp home in Imac 17'', but it doesn't detect the network card.
    How can I install the correct drivers? Does anyone know what is the card's label so I can download the drivers.

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta

  • How do I find out what network 'card' is in my DV6700?

    There are umpteen numbers of various DV6700's...the only model number I show on mine is DV6700....yet, the driver info does not list a wired driver..only wireless.  I need the 'car' manufacturer and the driver for windows XP.  How and where do I get this information?  (My hard drive failed and I had to install Windows XP Pro, cold, from a Microsoft CD and it did not have any laptop drivers that were recognized by my laptop.)
    Thanks in advance

    Really there are only 2 versions, Intel and AMD. If you have AMD the network card is driven by the chipset driver for the nVidia chipset which you can get for Windows XP:
    Everything you need is explained here:
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    Look in the "difficult models"

  • T520 won't detect Network card in WDS/WinPE/​Ghost image disk

    Hello all,
    I figured I would just post this so I could save 2 days of someone elses life.
    I'm not sure how many other modes have the EFI and UEFI bios's in them but this has caused a lot of problems when trying to capture an image / image the Lenovo T520.  So for anyone else that is having these problems here is how I got around the problem.
    The Problem:
    While trying to boot up off a Capture image with a CD or PXE boot for our WDS server the laptop would not detect the network card giving no IP address and listing the adapter as a hybrid.  When trying to do a ipconfig /renew it would give an error around the lines of the loopback something or other ....... the adapter could not be contacted or initated.
    I instantly thought this was due to the vanila WinPE / Capture image not having the drivers for the Lenovoo T520, so I went to the website downloaded the new drivers and injected them into the WinPE disk(You will want ot use the NDIS Drivers which are included in the package for this).  Following this process it would still not detect or install the NIC.  After many hours of searching it would apear this was due to the EFI/UEFI bios options not going through the proper boot cycle when in a PE enviroment.  The solution was to mess around with the EFI/UEFI switches in the WinPE boot image during the creation proccess as listed below:
    ocdimg -m -o -u2 -udfver102 -bootdata:2#p0,e,bc:\winpe_x64\etfsboot.com#pEF,e,​bc:\winpe_x64\efisys.bin c:\winpe_x64\ISO c:\winpe_x64\winpeuefi.iso
    The link with more details is here: http://support.microsoft.com/kb/947024
    Eseentially once the new boot image was complied with the proper EFI / UEFI options enabled it went through the proper boot process detected the NIC and installed the drivers which I previously provided on the disk and we where off to the races imaging the new laptop.
    Hopefull this will help some others who are struggling with this or any other model that has this type of bios.
    Cheers, and thanks
    Please feel free to post any additional comments to help others if you found better ways to get around this
    One side note the EFI/UEFI to legacy mode only does nothing for the NIC problem, I have seen some posts where they can help with the hard drive issues when imaging, however as for the nic not loading in PE enviroments this setting in the BIOS did not reslove the problem.

    Hi Rusty1234
    If I did not remember wrongly, you may present or add drivers (network, hardware) under WDS / Ghost software or copy necessary drivers (e.g. your T520 network card drivers) under it's PXE / boot section.
    Happy 2012! 
    Peter
    W520 (4284-A99)
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future 
    =====================================
    Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
    http://forums.lenovo.com/t5/General-Discussion/Dol​by-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62​...

Maybe you are looking for