Network Card XP Driver Configuration

I've installed winxp home in Imac 17'', but it doesn't detect the network card.
How can I install the correct drivers? Does anyone know what is the card's label so I can download the drivers.

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Similar Messages

LAN Network Card Ethernet Driver

Computer Crashed, Vista. Loaded Windows 7, Realtek PCIe FE GBE Family Controller Series Driver will not load on Windows 7.
Is there a driver for this Network Card for Windows 7 ?

Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
- Peter

Replacement wired network card and driver for G4/OSX 10.3.9???

Does anyone know of a wired network card that will work in a Mac (with or without a driver) when the one on the mother board is not longer functioning? It seems that my built-in Ethernet card was fried in a recent electrical storm and I'm looking for a replacement so I can connect to the internet again. My cable internet modem and cables were replaced after the storm and have been determined to be in working order.
No theories, please -- I'm looking for a proven solution.

Hi
I found the Kingston KNE100TX (NB not KNE110TX) to be satisfactory in my B&W G3.
Drivers required and available from Kingston up to OS9. No drivers required for OSX. See
http://www.xlr8yourmac.com/OSX/osx_networkcards.html#kingston
(There are other reports in this linked page but my experience is with the KNE100TX)
Best wishes
John
G4 Quicksilver/733/1GB/80GB(ATA)+18GB(SCSI) Mac OS X (10.4.7)

Satellite A500-15N: Can't find Network card XP driver

Hi everyone,
I've just blown away vista on my new A500-15N and installed XP + SP2.
The install went OK but I now have some issues with certain devices not working.
They are: 3 x Base System Device's, 1 x Ethernet Controller, 1 x Network Controller, 2 x PCI Device's, 1 x SM Bus Controller, 1 x Unknown device and 1 x Video Controller (VGA Compatible).
I thought I would be able to load some Network card drivers to enable access to the internet and then be able to download everything else, either automatically or manually. But I can't get any network card drivers to load!!!!!!!
After loading some from the Toshiba web site, it didn't make any difference.
I deleted and then autodetect the network card from device manager but I cannot find any of the installed drivers to get it working.
Does anyone know what I can do to cure this or any of the other issues?
Thanks
MrAngry

Hi
Do you need the LAN or Wlan card driver or both drivers?
As far as I know the LAN card chip is from Realtek (1GB/s) and the WLAN is Intel 5100AGN.
The WLan driver can be found here:
http://aps2.toshiba-tro.de/wlan/?page=downloads
Intel PRO/Wireless 3945/4965/5100/5300
The LAN driver can be found on the Realtek page:
http://www.realtek.com.tw/
You can check the Toshiba European driver page. Other notebooks series uses the same Realtek LAN card and the driver should run too.

How to configure Netgear FA510C Network Card

I installed Solaris 8 (Intel) on my laptop(Compaq Presario
1275) and have NetGear FA510C network card to be
configured. When I installed Solaris, it didn't recognize
the network card, and I have no idea how to configure
this network card. Does any have any idea how to
install and configure this network card?
I'll appreciate your help.
cwpak

Try to use devfsadm -v to find the device
Then use ifconfig dnet0 (not positive this is the right syntax for SMC) to plumb the device.
Then use ifconfig dnet0 192.168.50.4 up
You may have to modify these files to get the IP to come up on startup and properly resolve:
/etc/hostname.dnet0
/etc/netmasks
/etc/resolv.conf
/etc/defaultrouter
/etc/nodename

4500x 10Gb/s network card

Hi all
I'm configuring a new 10Gb/s switch solution (WS-C4500X-F-16SFP+) with DAC cables (SFP-H10GB-CU5M) for our customer. He asked us a 10Gb/s compatible network card for his ESXi servers. I've looked several brand (qlogic, intel, broadcom) but I'm not able to find a compatibility between switch->dac cable->netwok card.
Could you suggest me a correct network card for this configuration?
thanks
Matteo

...talked to a Mac Genius - he had no idea...
Did the AirPort card work in the shop?
...MBP's Network Card is JUNK...
You mean the built-in Apple AirPort card? The one that I am using right now cruising the Internet flawlessly while sitting in my back yard, about 200 feet from the base AirPort Extreme?
There has to be some intimate setting that needs to be flipped on your MBP. I am sure others here will assist you. I don't know the settings well enough - they just have worked for me without problems from Day One.
Just for the record, I have the ONLY MacBook Pro that came from Apple with no problems - that is, if I were to believe everything written in these messagegroups. My batteries don't explode. My AC adapter hasn't spontaneously combusted and burned my cat to death. My 17" matte display doesn't have a single pixel out of whack. No matter where I place my AC adapter, the internal speakers work as expected. Airport performance is to my liking. I am the luckiest guy on the planet...and this was my first Mac purchase after spending over 20 years with that other OS.

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Network Card Driver

Hello Dear All,
I am new to Solaris 10 and I wud like share my problem with you guys.
I have installed solaris 10 on my intel x86 machine. It's working fine. Only the issue is with Network Card.
Following is My Hardware Profile...
Mother Board :- Intel D945GCR
Onboard Lan :- Intel(R) Pro/100 VE Network Connection.
Externel Lan Card :- Silan sc92031 PCI Fast Ehternet Adapter.
The above mention LAN cards are not getting installed and I have 64 bit Kernel and drives are of 32 bit.
So kindly Help me to get correct driver and patch of Solaris10 for the same, as i had done lots of google but, I am not able to identify the correct one.
Thanks lot to all for all your kind guidance and support in Past and Future.

Hello Dear All,
I am new to Solaris 10 and I wud like share my problem with you guys.
I have installed solaris 10 on my intel x86 machine. It's working fine. Only the issue is with Network Card.
Following is My Hardware Profile...
Mother Board :- Intel D945GCR
Onboard Lan :- Intel(R) Pro/100 VE Network Connection.
Externel Lan Card :- Silan sc92031 PCI Fast Ehternet Adapter.
The above mention LAN cards are not getting installed and I have 64 bit Kernel and drives are of 32 bit.
So kindly Help me to get correct driver and patch of Solaris10 for the same, as i had done lots of google but, I am not able to identify the correct one.
Thanks lot to all for all your kind guidance and support in Past and Future.

?? configure network-cards under Sol. 8 ?? please heeellpplp

Hi,
I'm a stand alone Solaris's user (at home). Since about 2 months I've installed Solaris 8 on my PC, and wont be able to configure my Internet-Connection and my privat Home-Network.
I'd already read about 500 different publication's pages, but wont be able to go any further. My main PC contain Solaris 8 and has two RTL-Network-Cards. One for the Internet Connection(LAN), and the other (interne hub) for my small privat network at home. I've read there should be two files named: /etc/hostname.XXX0, XXX1. But there arent such files to see by me. The only file I have is "/dev/hostname.". I've tried to create them and lunch some commands I've seen in some manual's page.
Result ===> some error messages by the boot sequence.
Please can anyone help? Without having these cards working, I can't have any Internet connection.
The OS (Solaris) is already working on my PC, and I love it. But the only problem is how to set up these damned hardware, Network-Cards, Sound-Card and. I don't really know how to start with.
Please help!! Dont want to give up and I will not! Please help me to enjoy that hard work.
Thanks for helping.
PS: I'm connected to the internet trought Network (LAN), i.e I'm using a RTL 8029 PCI Ethernet network-card, and the interne Hub is also a RTL 8029 PCI Ethernet card.

yes. you got it .... eg..
/etc/hostname.le0
/etc/hostname.le1
in here put the hostname ... so at the shell prompt:
# hostname <cr>
should give your hostname.
now, in the hosts file: eg:
# Internet host table
127.0.0.1 localhost
<your ip address> <your hostname> loghost
129.156.89.252 host2
you need to reboot after this.
if you get a 'bad address' error on boot,
you probably have a mismatch of hostnames/ip addresses somewhere in their respective files.
also, see:
# man hosts
# man ifconfig

Dbconsole configuration - two network cards

Hi,
I have two network cards in the Solaris server and
Oracle 11g2 EE database server.
One network card is used for connection to the application (data network). Connection though standard port 1521.Database configured using server name defined for Net1 card and I can connect to the Oracle database using net1 card from apps server.
Second card is the management card (connected to the management network).
Is it possible to use it for connection to the dbconsole installed in the database ORACLE_HOME?
If yes, how I should configure dbconsole that I can see dbconsole web window through net2 card.
Thanks,
Oleg

Messy setup IMO, but anyway....
Your faulty resolv.conf is the reason you can't ping google. Edit it manually as required, and then use the -R flag in /etc/conf.d/dhcpcd to prevent it being overwritten. DHCP on both interfaces will probably cause routing issues as well, in which case you will need the -G flag.

How to configure HP Designjet T610 network card.

Dear All! i have HP Design jet T610 with network card HP JetdDirect 620N & now i want to configure my plotter on network, i checked plotter setting & go to connectivity panel but there is no option to give it static ip or host name etc. so can some please guide me how i configure my plotter via network?

We have HP Designjet T610, it has already network interface card placing on the plotter, so i don't know that is Jetdirect or not?! How should i know that, also how to configure and include in the network? it saying "Jetdirect -> No" on the connectivity settings. Pls help?

How to configure SMC 9432TX - Network Card

Hi,
My Solaris8 (Intel) works fine but I just got a NIC card. Can anyone tell me the steps to Install and configure a Network Card.
I have SMC 9432TX .
Thanks

Try to use devfsadm -v to find the device
Then use ifconfig dnet0 (not positive this is the right syntax for SMC) to plumb the device.
Then use ifconfig dnet0 192.168.50.4 up
You may have to modify these files to get the IP to come up on startup and properly resolve:
/etc/hostname.dnet0
/etc/netmasks
/etc/resolv.conf
/etc/defaultrouter
/etc/nodename

What API i can see network card driver name

Dear all
in java i/o evirnment what API I can use to call current machine network card driver name?

Well the first step for you is to look through your Windows documentation to see what the library call is to get the information you want. Can you find that and post what you find, and post the full signature of that library call (ie, arguments and return type)?
In other words, here's what you should do: Write a simple C program that gets just the information you are looking for. How that works is outside the scope of JNI, so it's outside the scope of this forum, but once you get that working, post some info about it and I'll explain how to get that linked in with JNI. The good news is, it's easy to do.

Realtek PCIe GBE network card driver for Solaris10 x86

Hi Gurus,
My laptop has a Realtek PCIe GBE network card but I could not find the driver for Solaris10 x86 anywhere, can anybody help me with this issue?
Thanks

how about this?
http://homepage2.nifty.com/mrym3/taiyodo/eng/
other google hits indicate that there is a realtek driver in OpenSolaris.

Cannot configure External Network card

I cannot connect externel Network card to the system.OS cannot see the newly installed networkcard. My OS is SOlaris 10 x86 5/08. i tried different types of Network card Realtek,Datalink. Network Card number is D-Linkk DL10038C .Couldnt find any driver for this Network card that support for Solaris.
Can any one help me please....

Probably as stupid question but is there a way to export the driver from OpenSolaris to Solaris 10 as OpenSolaris supports the NIC?
By the way, I don't know if it matters but the info for my NIC on Solaris 10 appears both in */boot/solaris/devicedb/master* and */etc/driver_aliases*. It's just that the system doesn't detect it, when I run ifconfig -a it only lists the loopback interface.

Network Card XP Driver Configuration

Similar Messages

Maybe you are looking for