Network carrier name not changing after using another sim

Hi,
My mobile was activated by the store representative later when I insert my Sim card the network carrier name shows the one used at the store.
Moreover my phone is working normal with phone calls and SMS.
How can I change the network name back to my home network? Please help...
Thanks & Regards,
Sudhan

Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo. But before you do this. Leave your iphone on aeroplane mode for 30 seconds Then see if network name has change if you only got iphone today it may be to morrow before it changes. Cheers Brian

Similar Messages

Hi i just bought an Iphone 4s and every time i try to activate it It stops half way through and says the sim carrier is not supported please use the sim that came with this phone (which i am doing) and will not let me skip this and will not activate??/

Hi just bought an iphone 4 today tried to activate the phone and it won't let me..I go through language ect and it says activateing iphone may take a few mins then just stops and message on screen says that the sim carrier is not supported and please use the sim which came with the phone(which i am..& have tried another sim and still not working)........It wont let me bypass have tried reseting phone and restarting it nothing helps????

Your iPhone is locked to the original carrier who sold it
Only they can unlock it
The sim the iPhone refers to is the one the iPhone is locked to
You will have to contact them

[SOLVED] Network interface name keeps changing

My network interface name keeps changing between wlp2s0 and wlan0. This is a real pain, since I never know what name will be generated at boot. Most of the time it's called wlp2s0, so this is what netctl is set up to handle by itself. At boots were wlan0 is generated I have to connect manually.
I've tried making the name static by adding a rule to the /etc/udev/rules.d/10-network.rules. The rule i added was:
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="48:5d:60:7e:64:e9", NAME="wlp2s0"
Wlp2s0 is generated at boot alright, but I still have to connect manually with this solution. As if the "new" wlp2s0 is not recognized as the old one (same MAC). What gives?
This is on an Asus Eee 1001PXD, with the Qualcomm Atheros AR9285.
Last edited by madr (2013-05-18 20:09:34)

I've now been able to replicate the issue, and run the command:
journalctl -b
I did find the output:
mai 18 02:30:02 <hostname> systemd-udevd[126]: error changing net interface name wlan0 to wlp2s0: Device or resource busy
I haven't been able to process the whole output yet (I'll continue tomorrow if necessary), but I've found some things that I hope will clearify things. I get similar outputs to the following a lot throughout:
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: carrier lost
mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: waiting for carrier
mai 18 02:30:04 <hostname> systemd[1]: [email protected]: control process exited, code=exited status=1
mai 18 02:30:04 <hostname> systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
mai 18 02:30:04 <hostname> systemd[1]: Unit [email protected] entered failed state.
mai 18 02:30:04 <hostname> systemd[1]: Starting Network.
mai 18 02:30:04 <hostname> systemd[1]: Reached target Network.
EDIT:
I see now that this is later in time, so that's not so strange after all. I'll look some more.
EDIT2:
The error code that a name change i impossible is the first time the term 'wlan0' occurs in the log. However there's a line much earlier that talks about wlp2s0:
mai 18 02:29:59 <hostname> systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s0.device...
But as I said, if this information doesn't help, I'll have a closer look at the output tomorrow. Getting late here in Norway now.
Last edited by madr (2013-05-18 01:20:50)

IPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars

Hi my iPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars but it was working fine till today then all of a sudden lost signal what do i do any help much appreciated

I've been experiencing with the same problem lately. Have you tried getting a new sim card?
With the new sim it seems to work well for a few days and then it goes back to the same problem. The warranty on my phone just ended about a month ago, and I've never dropped it and no water damage either. When I do a erase all and reset, it seems to work for a few days again and comes back to the same issue. I've deleted all my apps and been using the phone just as a phone and txting device. New IOS update doesn't seem to change this issue either. I've been getting by with doing a network reset and turning it off and on a few times a day.
Anyone have any solution? Much appreciated!

Hi i just ended my service with my service provider and was wondering if i have to do anything to use my iphone 3gs with another carrier. do i need to get it unblocked to be able to use another sim card

I just ended service with my at&t and was wondering if i have to do anything like have my phone unblocked to use another sim card or use another provider

I have a 3GS, out of contract with AT&T. I emailed for the unlock, and got an email saying:
"Request number: (xxxxxx)
Thank you for contacting AT&T Customer Care about unlocking your iPhone.
We have reviewed your request and confirmed that you are eligible to have the requested iPhone unlocked.
Please allow 24 hours upon receipt of this notification to complete the unlock.
To complete the unlock, simply:
Open iTunes on your Mac or PC and verify that you have Internet connectivity.
Ensure a SIM card is inserted into your iPhone.
Connect your iPhone using the dock connector to USB cable that came with your iPhone.
Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
For questions regarding AT&T's wireless service and iPhone, please visit the Phone/Device Learning Center.
We thank you for your continued business.
You may also check the status of your unlock request by clicking the link for AT&T's Device Unlock Status Portal.
Sincerely,
AT&T Customer Care Team"
Now the deal here is, iOS 6 is out now, so in order to complete the instructions and restore it with iTunes, you have to update to iOS 6. I decided to keep 5.1.1, so I did NOT restore the phone. I checked a couple IMEI checker sites, and they all said my IMEI was unlocked, so rather than use iTunes, I just replaced the AT&T SIM with an O2-UK SIM card I had when using my Android phone in England. I was pleased to see T-Mobile show up as my carrier when I turned the iPhone on, and in Settings, it shows O2 as the carrier instead of AT&T, due to the O2 SIM being installed. Then a moment later, I got texts saying what my remaining British £ balance is, since I had leftover money on the SIM from my last trip, and another text said "Welcome to America, have a nice trip!"
The phone isn't jailbroken or anything like that. It's still on 5.1.1 with the proper, working Google mapping. Never restored via iTunes. Never updated to iOS 6. Any SIM card works. No tricks or hacks. You don't have to restore the phone to complete the unlock.

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier ... here is what it says below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

So.. You need to contact the carrier for the iPhone's original sim card, and request they unlock it. The carrier is the only one that can unlock the sim of the iPhone.

After use another itunes account Apps of old itunes account stay untouched[intact]

If i HAVE ACCOUNT from Another country lets say CountryA, hence my country do not permits register in itunes, and have a credit card of a friendB in CountryA, what supposed to do: use this credit card[of a friendB] in my account or use/login to my friendB's itunes account and use his credit card? Both can be done...well what do?
After use another itunes account Apps of old itunes account stay untouched[intact]?

If have an account with credit card in itunes and buy apps for ipad-1 [PC-1], then login in this account from another PC-2 win, and want to install the same bought apps but for another ipad, ipad-2 then:
needed reinsert credit card?
prior bought apps needed re-buy them?
may copy apps files.ipd files from PC-1 to PC-2 without buy them?

Irc account keeps disconnecting cannot use IM what is nick at the beginning of the name ..can i use another name ? thank you

hello i am trying to set up instant messaging ....the account keeeps disconnecting after a few seconds and i cannot make it work
it keeps saying nick ... what is nick at the beginning of the name ..can i use another name ?
if i use mozilla for IRC what is the server name ?
what other details do i need to type in ?
Thunderbird is running on a single home PC which only has Open Suse 13.1 x64 linux on it ( no Windows )
thank you

'nick' is your nickname which you entered when you set up the IRC chat. You can register your nickname by entering "/msg nickserv register <password> <email address>"
Then when you start next time enter "/msg nickserv identify <password>"
You can get a list of nickserv commands by entering "/msg nickserv help"

HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

This AirPort Express:
http://www.apple.com/airportexpress/
It is the only Express with 2 Ethernet ports. All others are "old"
Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Overhead calculation not happening after using orgin group.

overhead calculation not happening after using orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

Battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

battery is not charged after using all of my battery.
Of course it isn't — you've just drained it. Plug your AC adapter in and charge it up again.

Network carrier name not changing after using another sim

Similar Messages

Maybe you are looking for