Network Change Detected

At a seemingly-random point either a web page won't load (Safari tells me I am not connected to the Internet), or my email tells me it is having problems getting to the server. However, the 'bars' in my menubar show that I am still logged onto my home network and I still have a connection and a strong-enough signal. The rest of my family is still online and my iPhone is showing that it's online on the wireless connection.
Safari offers to run Network Diagnostics: I do that, and it comes to a point where it says: "Network Change Detected: Your network configuration has changed. Click OK to proceed to the next step."
When I do that, and Continue (without changing the options that the dialog is showing me); it completes and tells me my connection is fine, which it then is. After that I can go online, retrieve/send email, etc. ... until the next time (usually a few minutes later)
My OS is OSX 10.6.4 and my version of safari is 5.0 (6533.16). I've got a linksys router with a password. Is there anything that I can do to my computer or my router to fix this?

I'm sorry to bump this, but I really wish someone could shed some light on the situation. I realize now that it's probably not a problem with my MacBook and instead with my router, but if anyone has any idea why a router would all of a sudden stop letting wireless computers connect to the internet I would love your input. Thank you.

Similar Messages

"NETWORK CHANGE DETECTED" - Broadband dropping out

About 4 to 5 weeks ago I started finding my broadband connection would just 'drop out'.
I'd lose it. No email or internet browsing, nothing.
It might come back on it's own, it might not.
Generally I'd run diagnoistic's, and some time sit would come back immediately, some times I'd have to run it a few times
Sometimes I'd give up and walk away.
Often I get the message "NETWORK CHANGE DETECTED", and the connection would re-establish itself.
It may run for minutes, and I'd be back at square one, or it could run OK for days.
All extremely frustrating.
I've read past posts and see that this problem has come up before, but I cannot find a "do this to fix it" resposnse.
Seeing that it's happened to others, I'm hoping it's something Apple can advise on.
Does anyone know why this happens and how to fix it. I'm really at my wits end.
I've been in contact with my internet provider who give me the usual answers.
Mac-Mini (2.4Ghz Intel Core 2 Duo) running OS 10.6.7
8Gb Ram
Netcomm Modem NB6PLus4W
Broadband ran fine from Late December 2010 until mid may 2011. No idea whats cause this issue.
Thanks all.
Robert

This is interesting I just put up my first question to the community also with these things in common
I am in Australia
with TPG on ADSL2+
I have a netcomm NB14WN wireless router
mac version 10.6.7 then updated to 10.6.8 - hasnt made any difference.
since I joined with TPG I have also had at first very slow and unreliable speeds (worse than dial up) and several nights a week it would repeatedly disconnect and the network change detected.
So since numerous discussions with tpg and several 'rebooting' everything they had a level 2 engineeer check and update the servers and now with the ethernet cable it is stable and fast ( same bandwidth and speed test every time). What I still have at this stage is an unreliable wireless connection and we have checked for interference in the house etc and now they have finally sent me a replacement modem to see if that makes a difference (should pick it up tomorrow). The problem is that some days the wireless is fine and somedays it isn't. It played up again two hours ago - put on the ethernet cable and it was fine, took the cable off a couple of hours ago and the wireless is fine at present whilst I am typing this......So will let you know how the other wireless router goes - apparently they check this one before they send it out but this one is from Netcomm also - I wonder if it is that - my dad and I looked it up on the net and it only sells for $100AUS which is pretty cheap - when I touch it underneath it is also very hot.

"Network Change Detected" - repeats

This has been happening for roughly the past two weeks. As far as I know, I have done nothing to change my Network configuration.
Situation: Powerbook G4, running 10.4.11 -- online via my wireless connection at home. At a seemingly-random point either a web page won't load (Safari tells me I am not connected to the Internet), or my email tells me it is having problems getting to the server. However, the 'bars' in my menubar show that I am still logged onto my home network and I still have a connection and a strong-enough signal. My husband is still online on his notebook and my iPhone is showing that it's online on the wireless connection.
Safari offers to run Network Diagnostics: I do that, and it comes to a point where it says: "Network Change Detected: Your network configuration has changed. Click OK to proceed to the next step."
When I do that, and Continue (without changing the options that the dialog is showing me); it completes and tells me my connection is fine, which it then is. After that I can go online, retrieve/send email, etc. ... until the next time (sometimes a day, sometimes a few hours).
What is the "Network Change" that Network Diagnostics has detected? I have not done anything to change my Network. In fact, I have my Preferences 'locked' (ever since that problem with the 'looping' by the Network preferences, several months back).
Since I now know how to get things back working it's only a bother. But I am left wondering if there is something more dire that this signals. Any ideas?
(The router is a Belkin; the connection is Comcast cable modem. These have not changed.)

Hi deemacm, and a warm welcome to the forums!
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
Try this cure for Security update...
http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
The locations are actually...
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Airport Interface...
208.67.222.222
208.67.220.220
Then Apply
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.

Unable to connect to wifi-network change detected

I have the OSX 10.6.8 running on my macbook and since a couple of days i'm not able to connect to wifi.Network diagnostics gives me a 'Network change detected' error every time it appears to connect.The WiFi settings have not changed and I'm able to connect to it with my android tablet and phone.Any pointers appreciated.

check this link out for more info
http://www.ehow.com/how_4537240_using-wifi-data-plan-t.html.
I saw this in another post
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue

Every time there's a power cut or I turn off my router, my Macbook doesn't detect the network and doesn't accept the password. Finally, after many, many attempts at solving with 'diagnostics', rebooting...the 'network changes' detected message shows.

How can I get it to look for a network change - or find the change immediately - and speed up the process? Is there really a change? This has really frustrated me many, many times.
I'm using 10.6.8 and see there's an update that supposedly helps airport problems but that people hatve problems with it. I'm having enough problems without those too!
Thank you for any ideas.

Take your battery out and reset your PMU.
http://docs.info.apple.com/article.html?artnum=303319
Next time you shut down, wait until the computer is totally shut down -- i.e., make sure you don't hear your fan running, the screen is black and that the light is out on the front of the computer -- before you close the lid.
I had that exact thing happen once, and since I done the above, it's never happened since.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Unsupported wireless network device detected

Hi guys,
I had to change the motherboard of my DV9420US; I bought a new motherboard from Megabyte Trading, the part number was the same (444002-001) and they told me it was an HP piece. However, after the technician replaced it, the following error appears when booting and forces me to shut down:
"104-unsupported wireless network device detected. System halted. remove device and restart".
Can anyone tell me how to fix this problem?
It starts to be disappointing: I have already spent over 400 bucks to repair the original motherboard first and buy a new one after, with the result that my laptop does not work yet.
Thanks.
simone73
This question was solved.
View Solution.

Remove the wireless card and boot into the notebook. Once into windows you will have to hardwire the notebook into an internet connection and go to HP.com. Place your PN number in the search and go to the software and driver downloads find the BIOS header and download the most update BIOS and flash the BIOS for the notebook. Once this has completed replace the WLAN and boot it back up, should fix the issue.

My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

error at start for hp dv2410us stops at black screen with the next error message
error 104 unsupported wireless network device detected. System halted. remove device a start

Hi:
Did you just install a wireless card? You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
Paul

104 Unsupported Wireless Network Device Detected

Opening up the computer this morning i have a message that says: 104-Unsupported wireless network device detected. System halted. Remove device and restart.
There are no additional devices added or changed before putting laptop in hibernation for the night last night. Odd. Any suggestions?

Hi
In case you are comfortable reseat the Wireless card from the back panel also try to visit HP website and update the Bios for your unit and see if this fixes your issue.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Basis System: 2 possible network problems detected - check tracefile

Hi Experts,
I have installed a a Netweaver 7.01 when i start the server throught MMC
first the dispatcher show the message as unable to reach teh message server
but where as message server is running successfully.
after few seconds it shows the status Stopped
Below is my trace please help me to solve this issue.
Thanks,
Veeru.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        NSP
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    95
intno      20050900
make:      multithreaded, ASCII, optimized
pid        3892
Wed Jan 14 05:46:37 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3892) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 95 successfully loaded
     shared lib "dw_xtc.dll" version 95 successfully loaded
     shared lib "dw_stl.dll" version 95 successfully loaded
     shared lib "dw_gui.dll" version 95 successfully loaded
     shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 14 05:46:39 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0121.qqq.nxst) took 2 seconds
Wed Jan 14 05:46:44 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Veeru_NSP_00                            <
DpShMCreate: sizeof(wp_adm)          6328     (904)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1280)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04ED0040, size: 4205552)
DpShMCreate: allocated sys_adm at 04ED0040
DpShMCreate: allocated wp_adm at 04ED1A28
DpShMCreate: allocated tm_adm_list at 04ED32E0
DpShMCreate: allocated tm_adm at 04ED3310
DpShMCreate: allocated wp_ca_adm at 052435A0
DpShMCreate: allocated appc_ca_adm at 05243A50
DpShMCreate: allocated comm_adm at 05243F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052C4DB0
DpShMCreate: allocated gw_adm at 052C4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052C4E20
DpShMCreate: allocated wall_adm at 052C4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Wed Jan 14 05:46:50 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> NTGetBaseAddress failed, no free region [esnti.c      1450]
Error 15 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   9556]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   9485]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:00 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Tue Jan 13 21:47:00 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
0 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
1 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
2 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
3 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
4 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
5 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
6 ?         -1 Free          no      0   0             0
Dispatcher Queue Statistics               Tue Jan 13 21:47:00 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          0
wake_evt_udp_now     0
wake events           total     0, udp     0 ( 0%), shm     0 ( 0%)
since last update     total     0, udp     0 ( 0%), shm     0 ( 0%)
Dump of tm_adm structure:               Tue Jan 13 21:47:00 2009
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue Jan 13 21:47:00 2009
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:05 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Veeru_NSP_00                            < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
Wed Jan 14 05:47:06 2009
***LOG Q05=> DpHalt, DPStop ( 3892) [dpxxdisp.c   10333]
Good Bye .....

Hi Eric,
Actually in my NSP_DVEBMS00_VEERU thePHYS_MEMSIZE is set to 128
So.....
Do i need to change in the here below file.....:
If yes wht shall i change it to ?
Template for ABAP SID_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = Veeru
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PHYS_MEMSIZE = 128
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_spo = 1
rdisp/enqname = Veeru_NSP_00
rdisp/myname = Veeru_NSP_00
abap/buffersize = 100000
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/installed_languages = ED
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 250000
rdisp/PG_SHM = 100
rdisp/ROLL_SHM = 100
rdisp/autoabaptime = 0
rdisp/bufrefmode = sendoff,exeoff
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 300
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
icm/host_name_full = localhost
mpi/total_size_MB = 10
auth/new_buffering = 1
sapgui/user_scripting = TRUE
ssf/name = SAPSECULIB
ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
login/ticket_only_to_host = 1
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP

Laptop is unable to detect my home router wifi network but detecting all other neighbour networks

My pavilion g6 laptop is unable to detect my home router wifi network but detecting all other neighbour networks even my phone network also. The same router network is detecting good in another laptops.

Hi , Welcome to the HP Forums! It is a great place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More i understand that your notebook finds and displays many network but not yours but another laptop does locate it. One of the easiest steps to try is to reset the router by removing power for approximately 20 seconds and then reconnecting the power. Give the router time to reset and come back up . Does you network now show? If your network is set to 5.0 GHz try changing the setting to mixed mode or 2.4 GHz as that is the best selection for HP notebooks. Here is a link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). To say thanks for replying, please click the thumbs up icon below. If this overcame your difficulty please tell people by selecting solution provided to allow it to found with greater ease. Best of Luck!

USB-6009 digital input change detection

Hi,
I am trying to acquire digital signals from an ni usb-6009 device using daqmx on labview 8.0. I need to write the signals from a port of the device to an output file only when there is a change in the signals and I am not able to do this successfully. I created a digital task in MAX and was able to select acquisition mode as '1 sample (On Demand) ' only. Any other selection for acquisition mode would result in error 200077 with the following message -
Measurements: Requested value is not a supported value for this property.
Property: SampTimingType
You Have Requested: Sample Clock
You Can Select: On Demand
I selected '1 Sample (On Demand)' acquisition mode and was able to see the channel values on running it in MAX as I rotated a device connected to the usb-6009 device. As expected the hex values on MAX were showing up as FF,7F,3F,BF and this pattern was repeated everytime I provided the input by rotating the device.
Next, I created a simple vi to use the digital task I setup on MAX. I want to be able to record the signals only when there is a change in the digital pattern from the channels.That is when there is atransition from FF to 7F to 3F and so on, the vi should write to an output file and if no change happens, it should not write to file. To do this, I explored the Timing vi and tried using the 'Change detection' mode, but that produced the same error as above.
Can anyone please suggest a way to accomplish what I am trying to do ? Any guidance will be a hugely appreciated.
Thanks
~Sej

All of that effort with sample rates, timing, change detection, etc ciuld have been avoided if you had read the specs. As you finally found out, the device only supports sftware timed i/o and no change detection. You wll have to do your change detection in software this is done with a shift register/feedback loop.

How to generate an interrupt using DI change detection on m-series card

Hi,
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
Thanks in advance,
Richard

Richard vl wrote:
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
RuthC wrote:
I also want to generate an external interrupt on an M- series pci-6229, and on a pci-6602.
1. Is there an exampe how to configure the registers?
2. which external signals can genarate interrupts on those cards?
Hi Richard, hi Ruth,
Let me address your questions together: first for 662x (part of M Series) digital change detection and then for 6602 (part of 660x).
622x (M Series)
Digital change detection has not been released in the DDK for M Series devices. If you must use an M Series device, please ask your field engineer to contact NI support so we can discuss options. On the other hand, digital change detection has been released in the DDK for X Series devices (63xx) [1].
If you can use one from that family, then your programming will be much easier -- the RLP manual discusses change detection as well as interrupts (Chapter 1: Interrupts, beginning on PDF page 48), and the example distribution demonstrates how to configure change detection on the device (dioex3). The last piece is data transfer: the example's data transfer mechanism is DMA, so you would need to supply your own interrupt handler to move data to the host (or alert the host that a DMA transfer has completed).
6602 (660x family)
Moving to the 6602, change detection is not possible. The 660x device family only supports polling for transfering data read on the digital lines [2].
Please let me know if I overlooked anything in your questions.
[1] NI Measurement Hardware Driver Development Kit
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11737
[2] NI 660x Specifications
http://digital.ni.com/manuals.nsf/websearch/57893F11B0C0687F862579330064FF6F
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

SAP-Basis System: 1 possible network problems detected - check tracefile

Dear Gurus,
I am getting this error in syslog in MMC for ECC 6.0 on windows with db2.
SAP-Basis System: > 1 possible network problems detected - check tracefile and adjust.
Regards
Rao.

hi,
can you look at this
[http://sapbasisnotes.blogspot.com/2009/05/sap-startup-problems-in-windows.html]
Regards,
Muralidhar

It doesn't recognise my password for wifi. Unable to connect. Tried ressitng the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook

iPad 2 doesn't recognise my password for wifi. Unable to connect. Tried resetting the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook and iPhone accepts the password, not my ipad 2

Hey brainmasala,
Thanks for using Apple Support Communities.
Sounds like you are not able to connect to a Wi-Fi network with your iPad. This article has a section for Unable to connect to a Wi-Fi network and the second article is the recommended network settings. If after these it still has the same issue you may want to restore the device to factory settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a nice day,
Mario

[svn:fx-3.x] 11086: Fixing Safari 4.x support for url change detection.

Revision: 11086
Author:   [email protected]
Date:     2009-10-22 11:42:17 -0700 (Thu, 22 Oct 2009)
Log Message:
Fixing Safari 4.x support for url change detection.
QE notes: None
Doc notes: None
Bugs: SDK-22483
Reviewer: Alex
Tests run: Manual browser test.
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22483
Modified Paths:
    flex/sdk/branches/3.x/templates/html-templates/client-side-detection-with-history/history /history.js
    flex/sdk/branches/3.x/templates/html-templates/express-installation-with-history/history/ history.js
    flex/sdk/branches/3.x/templates/html-templates/no-player-detection-with-history/history/h istory.js

HI,
Go to ~Library/Internet Plugins. You should see: Glims
"/Library/InputManagers/Glims/Glims.bundle/Contents/MacOS/Glims"
Delete Glims from the system and restart your Mac.
If you need help uninstalling Glims go here.
Safari 4: May unexpectedly quit with "Glims for Safari" Read where you see: Resolution.
Carolyn
Message was edited by: Carolyn Samit

Network Change Detected

Similar Messages

Maybe you are looking for