Network choices don't appear ?

I have a local network that is totally functional from a file sharing perspective;
iChat,iTunes,iPhoto all share ... but.. one of the macs no longer shows any data on it's NETWORK window It appears on other machines NETWORK window and opens fine from that direction. I have shut down all systems including router & airport serving defective machine and of coarse double checked sharing prefs ... ?

whoops, i meant downloaded files don't always appear on the desktop but i can see them in the terminal. it's been a long day heheh.
all three checkboxes in finder preferences are on so they should show on the desktop, i haven't done anything in open firmware yet. so far the system is running smoothly with clamXav turned off, it's possible version 1.0.1 (what i was running) was incompatible with tiger. the retrospect clients are all at the latest version released by emc/dantz.
i'm thinking less and less that it is a bug, especially since i can't find any mention of others having that issue on these discussion boards.

Similar Messages

CDs, flash drives, network shares don't appear on the desktop when mounted.

has anybody experienced this with os x tiger? i have experienced it on a wide range of powerpc macs (have not used an intel mac yet unfortunately) running all versions of os x Tiger (10.4.0 through 10.4.6)
when myself or users insert a CD, a usb flash drive, a firewire hard drive, connect to a network share, or even save a file to the desktop, the object does not appear on the desktop. it actually doesn't appear anywhere in the finder, not even in the finder sidebar. however with files at least i know they are there because i can see them on the desktop.
i've submitted a bug report to apple and i know they are working on finding out what is causing this. since i can't find anybody else having the problem i haven't ruled out the possibility that it is some 3rd party piece of software running, but i'm still doing my own testing. clamXav, temperature monitor, and the retrospect client are suspect and i'll need more testing to eliminate those as contributing factors to this bizarre finder behavior.
has anybody else experienced this with os x tiger? did you get it corrected? thank you

whoops, i meant downloaded files don't always appear on the desktop but i can see them in the terminal. it's been a long day heheh.
all three checkboxes in finder preferences are on so they should show on the desktop, i haven't done anything in open firmware yet. so far the system is running smoothly with clamXav turned off, it's possible version 1.0.1 (what i was running) was incompatible with tiger. the retrospect clients are all at the latest version released by emc/dantz.
i'm thinking less and less that it is a bug, especially since i can't find any mention of others having that issue on these discussion boards.

Hi. Does anyone know how to delete my guest network from the list of network choices that everyone in the neighborhood sees when picking a network? Followed helpful suggestions on this site to delete the netwk but it still appears. Appreciate any help!

Hi. I'm trying to make my guest network disappear from the list of network choices that appears to everyone in the neighborhood. Even though I followed the great suggestions on how to delete the network, it's still appearing in the list that everyone sees. It has my name and would prefer to get rid of it.
Please help! Many thanks!

Thank you for not only the tip but also especially the research showing that for anybody other that those using Wi-Fi for the first time the network wouldn't disappear. I wanted it to disappear for everyone so.....I finally solved it by resetting the Airport Extreme to the factory settings and starting over from scratch! It worked! Yay!!!!!
So, for everyone that has had this problem (and I've read many of the same complaints in different places on the Internet), you must go into Airport Utility and check the box stating that you want to reset it to the factory settings. Do not do it with a paper clip and the reset button on the box; I tried that first and it did not work. You must reset it via the Airport Utility. Then just start over and you will have the choice to NOT check the box to Enable Guests. If you want to enable guests, just be sure not to use your name or you're back to the same problem. Apple is so great with everything...wouldn't it have been so easy for them to just put this in the manual somewhere????? Thanks for all your help. Hope this helps others!

My Mac Mini (Mid 2011) doesn't connect to Time Capsule in 5GHz Network. This WiFi Network don't appear in the WiFi list. What's Wrong?

My Mac Mini (Mid 2011) doesn't connect to Time Capsule in 5GHz Network. This WiFi Network don't appear in the WiFi list. What's Wrong?

Oh yes, & 5 GHz doesn't do walls very well at all.
GHz and Network Range
The higher the frequency of a wireless signal, the shorter its range. Thus, 2.4 GHz networks cover a substantially larger range than 5 GHz wireless networks. In particular, the higher frequency wireless signals of 5 GHz networks do not penetrate solid objects nearly as well as do 2.4 GHz signals, limiting their reach inside homes.
http://compnetworking.about.com/od/wirelessfaqs/f/5ghz-gear.htm

Volume don´t appear in MDC

Hello,
I have 2 servers with xsan 2.1.1 with Mac Os 10.5.6 Server, and I created four volumes in xsan2, and one of them dont saw in one of the servers. The log says:
Jul 28 13:14:18: --- last message repeated 1 time ---
Jul 28 13:14:18 xsand[49]: mkdir '/Volumes/Dates': File exists
When I watch file sharing in server admin, the volumes don´t appear, but I start terminal, and go to /Volumes, the volume appear. this occurs in the master controller of Xsan. How can I fix it? .
In the other server the volume appear, and I can make changes, but dont appear in the other server.
I share this volume by afp in a local network, when one client connect by afp and connect to server, the volume appear. This is very strange, any solutions please?.
Thank you very much!

Sounds like you have a phantom mount record. This is when a folder remains after the unmount. All subsequent mounts result in failure because the mount point is technically still there. To resolve this, unmount all SAN volumes from all clients and servers. Then shutdown your San volumes (this is just a safety precaution). With everything shut down, use Terminal to navigate to the /Volumes directory on the troublesome system. Once there, you will likely find an empty mount record with the offending name. Delete or move the folder. Then fire up your SAN and mount all your volumes.
Obviously, you can do all this without stopping the SAN. However, that is the safer way, especially if you are experiencing something other than I described.
This happens every now and then with Xsan and firewire drives. Expect to do this once or twice every few months.
Hope this helps

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Imbedded videos don't appear since last update

Ever since the last update, imbedded videos don't appear on the screen. Is anyone else having this problem?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Airport Card don't appears

I've installed an Airport Card (2003 M8881LL/A) in my Power Mac G5 7,2 and it don't appears in the System-Profiler.
The OS is 10.5.8.

Open System Preferences>Network, see if new port detected pops up, or click on the little plus icon after unlocking the lock & see if you can add Airport.

Image Processing and machine vision don't appear in Function Palette

Hi,
I have problem and I can't solve it
Image Processing and machine vision don't appear in Function Palette, Although I set up NI imaq and NI Vision Acquisition Why??
Anyone can help me?
Solved!
Go to Solution.

If the image is already a Grayscale U8 image you would just have to save it to a bitmap file using the IMAQ WriteFile VI. If not, use the IMAQ Cast Image VI to convert it to a Grayscale U8 and then save it.
Also, it would probably be better to create a new thread for questions like these.
Cameron T
Applications Engineer
National Instruments

Some options don't appear in MAX

I have an Agilent 86142A OSA connected via GPIB-USB-HS cable to my PC. MAX recognizes it in the tree, but a lot of options (like self-test, calibrate) don't appear. I'm new in MAX, so I'm not sure whether this is acceptable or not. Have I made some error in installing the device, or do some options simply not show up for particular devices? I've attached an image of MAX in this situation.
If indeed the device is installed fine, how does one perform a test to see if the connection is good if the Self-Test icons don't appear?
Please let me know if it seems the device has been detected properly and all is well.
Thanks!
Attachments:
MAXimage.JPG ‏98 KB

Everything looks find. You are not supposed to have options for self-test or calibrate. Those would only be for NI's DAQ cards.

Some images don't appear in iPhone, but do on desktop.

Can someone download this PDF and let me know why the jpg images appear fine when viewing with desktop browser, but some images in the same document don't appear when viewing in Safari on the iPhone? Vector artwork and text show fine. Shows white space where JPGs should be.
Specifically, pages 1 and 4:
http://www.teamassociated.com/pdf/cars_and_trucks/TC6/Factory_Team/tc6ft_manual-mobile-4rg b.pdf

I just heard about this day before yesterday at the InDesign Print and ePublishing Conference in Washington, DC. When using display on an iOS device JPEG 2000 is not supported. There are two flavors of JPEG: JPEG & JPEG 2000.
Here's a Wikipedia article about JPEG 2000:
http://en.wikipedia.org/wiki/JPEG_2000
If I go to page 1 and 4 in your PDF and use Output Preview in Acrobat Pro (in Acro 9 > Advanced Print Production > Output Preview). Click on the Object Inspector tab and click on the image. It uses a JPEG 2000 filter.
Since I don't know how the image was created and saved, I'll leave it to you to resave it as normal JPEG.

Some USBs don't appear in Finder. They appear in Disk Utilities so how do I get them to appear in Finder?

Some flash drives/USBs don't appear in Finder. But they appear in Disk Utilities so how do I get them to appear in Finder?

If you've never used them before (they are new) then they are not formatted for Macs.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When you want to remove an external device you must Eject it:
First, select the Desktop icon of the external disk. CTRL- or RIGHT-click and select Eject from the context menu.

Layout option doesn't work in Easy Print VI panel, controls on tabs don't appear

Found two problems with the Report Generation VIs:
1) In the (Report Generation) Easy Print VI Panel or Documentation.vi, the Layout options don't work (dug down into the sub-VI's and found that they are not connected to anything).
2) If you have controls or indicators on a Tab Control, and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they don't appear. The only controls/indicators that do appear are the ones that are displayed on all of the tabs (ie, create an control and move it on top of the tab control so that it appears on every page). There is a sub-VI (Expand_control_ref_with_nested_controls.vi) that is called to handle nested controls (ie, clusters, arrays,etc...) but it should have a case to handle tab controls.
Solved!
Go to Solution.

Hey Sajosie,
Digging into the Sub-VI's you are correct in saying that the Layout Options user input is not connected to anything for most cases. However, In the default case of "Quick Print" the Layout Options are used to modify the layout of the report. In the help for this VI, it mentions that this input is ignored for "Standard Reports" and "HTML" report options. However, it does not mention that this ignoring of the Layout Options is expected for "Word" or "Excel" reports.
In terms of including controls and indicators in the report that appear on tab controls, I can make a product suggestion to make this sort of front panel design more compatible with the Easy Print VI Panel or Documentation.
Hope this helps.
-Ben
WaterlooLabs

Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

Thank you, razmee209! I must have checked everything 1,000,000 times, but when I just rechecked settings - notification - mail, I now see that Alerts -- both Show in Notification Center and Show on Lock Screen -- were turned off. Can't believe I missed that, so THANK YOU!

.m4r files sync but don't appear AND outlook contacts won't add to iphone?

hi guys,
This is my first post, made just a day after I got my iphone.
Now don't get me wrong, i love the iphone, but i'm worried i might have to send it back due to 2 glitches:
1) I exported all my contacts onto my computer from my old k800i, then imported them into contacts on outlook. Then I synced my iphone to outlook through itunes and it appears to be doing something on the itunes bar only for me to open my phone when it's done and the contact list is empty. It's synced the calender and itunes music thought.
2) I sent some ringtones to my friend who has a mac (I have a PC) and he changed them to .m4r files on that garage program on the mac, then he sent them back, i dragged them into the ringtone folder and they appeared. I went on itunes and they appear in the iphone tone menu, i sync with the actual phone and after saying it's done they don't appear in the tone menu on the phone.
That's 2 annoying things, do I need to send it back?
Any help would be great, thanks for your time.

Hi,
Please follow the steps below to make sure the reminders have been enabled in Outlook:
On the File tab, click Options.
Select Advanced in the Outlook Options dialog box.
In the Reminders section, select Show reminders.
Click OK.
I also found a similar thread here:
http://social.technet.microsoft.com/Forums/windows/en-US/70bbd99e-6c1b-4a56-b1eb-f1812f96ed56/outlook-2010-reminders-not-appearing-in-outlook-but-appearing-on-iphone
As mentioned in the thread, you can try these steps:
Use MFCMAPI to delete the Reminders Folder, then run "outlook.exe /resetfolders" to recreate this folder:
Download MFCMAPI:http://mfcmapi.codeplex.com/releases/view/118446
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If the problem persists, try to recreate the user’s profile of the Outlook to check this issue:
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support

Network choices don't appear ?

Similar Messages

Maybe you are looking for