Network computers not showing up

Cisco 2504 wlc, 1142n ap, windows radius server.
When I click on Network, the only computer that shows up is mine. If I am hardwired then everything shows up (Servers, other workstations). Is this a problem with the radius server or something on the controller?
TIA,
Eric

On the WLC, make sure that you have broadcast forwarding enabled.  Should be Contrller > General tab
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

  • Network shares not showing up in finder osx Lion

    The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
    This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
    So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

    Open Terminal and issue the following command
    ps aux | grep netbios[d]
    if you get a line similar to this
    _netbios          45   0,0  0,0  2477156   2456   ??  SNs   9:14am   0:02.44 /usr/sbin/netbiosd
    then the daemon is running, otherwise issue the following command to start netbiosd permanently
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

  • Wireless network connection not showing up in network connections

    Hi, Experts,
    I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
    Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet. 
    How to set up the  wireless network connection that it will show up in network connections?  Thank you very much for your help. 

    Issue Resolved.  I did not turn on the wireless switch.

  • Adding shared printers? Network printer not showing up in list

    I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

    Welcome to the forums!
    You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

  • Why is it my network does not show up any longer on wifi for ipad? Have tried network reset still not tere  cannot go to internet

    have tried network reset but my network is not showing cnnot access internet.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter.  Not sure where to go from here?.

    Airport Express.
    My network suddenly not showing up.  Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change.  Utility does not provide option for setup assistant where I could just start over.  So no wifi without network set up and can't use ethernet/router to troubleshoot.  I am stuck any assistance helpful.

    So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

  • I need help troubleshooting computers not showing up on network

    seriously, everything was fine until xmas eve. Now I can't see the computers on the network on a mac or a pc.
    Now, when I go to Start/My Network places on a pc the share points do not show up.
    Also when I go View Workgroup Computers - it returns an error. In the error it mentions permissions. I've propogated permission, restarted SMB services and restarted twice.
    OSX 10.5.1, Xserve, standalone server, SMB services are running, one username and password for everyone with r/w permission, even guests access is turned on, ...
    AT&T Netopia dsl modem (bridged mode), Linksys wireless router with ip's assigned to all computers, to a switch that routes to users and two more switches.
    note - I can see a few macs on Mac OSX Tiger and Leopard but nothing on the pc's. I can, however, see a unix sever that's on the network by typing \\ServerName in an explore address bar. And at one time I could type in \\Xserve on both macs and pc's but no longer.
    Thanks,
    ctrent

    Any relationship to what works and what doesn't?
    no
    Could there be a bad cable or bad switch port?
    I've thought about that - checked and rechecked
    Do you know how to see if there are two momputers with the same ip connected to a network?
    Tried swapping a working and a non-working box to see if it's the connection that's stuffed?
    no
    but I just did
    I tested an imac using the same connection. It was able to browse the entire network.
    I noticed that MacBookPro had tld-internal.com in the Search Domains entry box.
    I entered TLDMacserver.com as the search domain and was able to browse the server share points and read and write. (hoorah!)
    I think that this is where the problem is - Is there a domain that needs to be set up or is already setup? I don't know of a setting on pc's to Search Domains - is this just a mac thing?
    Now, seeing the other computers is the issue. I can only browse 4 macs and the Xserver on a mac but nothing on the pc's.
    Is there something in the Advanced TCP/IP Settings that I should know about?
    My server name on the left panel in Server Admin is TLDMacserver-com.local.
    Under Settings/Network the computer name is TLDMacserver-com
    Computer Name - TLDMacserver.com
    Local Hostname TELDMacserver-com
    Network Interfaces: Ethernet 1
    IPv4
    192.168.0.32
    DNS Name: TLDMacserver-com.local
    Anything interesting in the SMB-related server log files on the Mac OS X Server box?I'm not really sure what to look for.
    That's one of those cases where digging through the logs looks for oddities.
    I would probably have as much luck digging for gold.
    Also, probably related to my problem - my logmein.com remote conrol no longer works. I tried deleting the machine from my list and reinstalling Logmein on the server, but it won't install.
    It says:
    Istaller is damged
    Installer is unable to open the package.
    This is likely due to install framework's runner executable not having he proper ownersip &/or persmissions.
    Definitely seems that something got stomped on. Mayhap the disk?
    What's the state of your data archives?
    for those machines that can browse it's working fine.
    Your backups current?
    yes. A firewire drive that's swapped out. They both are backing up right.
    Next step would be to boot the installer DVD and verify the disk and verify the disk protections.
    it's just a download file from LogMeIn.com
    As soon as it downloads that error pops up and when I manually try to run the .pkg the error occurs.
    Up until now I've been able to log in just fine from anywhere.

  • Not all network computers are showing up

    Hi, I am on a network at work and I can see some of the network computers, but not all. I checked iTunes on another person I work with's pc and they could see more users than I could. I looked at the network diagnosis and they matched other than the IP address of course. Any ideas on what the issue could be?

    There is a daily limit imposed by iTunes on how many shared libraries you can access (5). If you've filled the quota, and users to whose libraries you've connected have logged off or quit iTunes sharing, then you see less than the maximum shared libraries until the next day.

  • Domain Computers not showing up in Network

    Whenever I try to view the Network Computers on any machine on my domain, I can only see 5 servers. There should be about 15 servers and 50 workstations.
    I have confirmed that Netbios over TCP/IP is enabled.
    All the proper services are enabled and automatic. Computer Browser, DHCP Client, DNS Client, Network Connections, Network Location Awareness, RPC, Server, Workstation, TCP/IP Netbios helper
    Any help would be appreciated.
    EDIT: Also, I am able to browse to all the servers and workstations by going to \\hostname

    Is the built-in firewall are disabled on both side.windows xp and windows server?
    You have to disable the Server Message Block (SMB) Signing to fix the "System error 64 has occurred. The specified network name is no longer available" with the net view command in cmd.
    Here is a link in which you can download hotfixes to fix this problem:
    http://support.microsoft.com/kb/916846
    http://technet.microsoft.com/en-us/library/cc786681.aspx
    Yes both client and server side Windows firewalls are disabled. I went ahead and disalbed the SMB signing. We'll see if that has any effect. Thanks for the help.

  • Network devices not showing up under "shared" in finder bar

    Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?

    Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
    If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
    Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

  • Computers not showing on home share

    I currently have 3 computers all on the same home share network. Two MacBook pros and a desktop pc. One MacBook shows each of the other computers. The other two computers only show the first MacBook and not each other.
    I am at a loss for how to make all computers see one another. Any ideas?
    Thanks!

    1. Try turn Off Home sharing one at a time and turn it back On again.
    2. If it doesn't help, switch internet security Off and do step 1 again.
    3. If you still have Sharing problem, see links below
    Understanding Home Sharing
    http://support.apple.com/kb/HT3819
    Trouble Shooting Home Sharing
    http://support.apple.com/kb/TS2972

  • Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC

    The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
    The registry still shows a Profile with the correct PROFILENAME in
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
    but that name does not show up in the Network List Manager Policies inside Local Security Policy.
    The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
    is related to this issue because of firewall restrictions.
    The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
    Any Help is appreciated,
    CrazyDog

    Hi,
    Based on my research,
    Network Location Awareness (NLA) service expects to be able to enumerate the
    domain’s forest name to choose the right network profile for the connection. The service does this by calling
    DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
    If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
    Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
    removed. In addition, please do not use loopback IP address.
    Here are some articles below I suggest you refer to:
    Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    Network Location Awareness
    http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
    Complete Step by Step to Remove an Orphaned Domain controller
    http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
    Best Regards.
    Amy

  • Error for Budget exceeded for Network does not show up while creating PR.

    Hi SAP Gurus,
    We have an issue while creating a purchase Requisition from Network. When we enter the Toatal Amount in the PR and if the total Amount is greater than the total Budget for the Network, the error "For item 001 Ntwk actvty XXX &  WBS element XXX budget amount XX USD exceeded " is not showing up in the foreground by the system and hence not able to create PR. It seems that while trying 30-40 times, the system will show this error in the foreground once or twice only and we want this to be appears in the foreground consistently. Can you please advice how to fix this? Thanks,
    Reagards,
    Imran.

    Hi,
    you need to maintain sufficient budget in respective WBS element by using transaction CJ30 and by releasing budget through CJ32.
    Check the budget availabilty in report s_alr_87013558.
    It will resolve your issue
    Regards,
    Sandesh Sawant

  • Network Drives not showing

    Hello,
    I have a outlook 2013 and windows 8, network drivers are showing on my computer.
    However, when i try to attach file the insert file dialog box does not show the network drive.
    For God, and Country.

    Please try to delete and re-create the network driver and then try again.
    This will usually fix the issue.
    Ashish Basran

Maybe you are looking for