Network connection from 10.2.8 to 10.5.1

Hi
Slight annoyance going on here. I have two machines connected to a router which in turn connects to a DSL modem. Both Machines have internet access. But I can only connect from the iMac 10.5.1 to my Quicksilver 10.2.8. Since this connection is primarily used for backing up my iMac the situation is tolerable. But I would occasionally like to access the iMac the other way around. When trying to do this I get either error= -36 or error= -5000 on my Quicksilver . I'm probably doing something stupid - But still, can anyone give me a helping hand?
Thanks,
Jacques

Hello Jacques,
I hesitate to post this answer for 2 reasons. 1st because your post is from December (and I only now have stumbled accross it) and 2nd my answer is so simple.
Have you enabled Personal File Sharing in the Sharing section of your system preferences on the I Mac?
Lobbin

Similar Messages

Stop network connect from auto-starting safari

OSX-10.4.6
fully updated
firefox-1.5.0.3
Every time I connect to my SSL/VPN with Network Connect I find safari auto-starting and appearing on my desktop. Any chance somebody knows how to stop this behavior? I dont want safari to run.
Cheers,
Noah

I think I got your answer in your later thread.

Why does my iPad mini refuse to connect to the shared network connection from my mac mini?

Sometimes it works, most of the time it just sits there "searching" with the little wheel just spinning away. I've tried resetting the network settings under the "General" tab as well as "forget this network" and have no password set, and still I get spinning. iPad Mini and Mac Mini are both up to date with software and have no current updates available. The iPad is only a couple of feet away from the Mac without anything but air between them. I have tried turning of wi-fi on iPad and back on again as well as turning off sharing and back on again and every combination I could think of and it's still spinning. I thought buying all apple products would make things easier to configure but that was totally WRONG.

I managed to get the connection back! I renamed the network under "Wi Fi Options" from the "Sharing" screen and told the iPad Mini to forget the network. I then restarted BOTH the iPad and the Mac Minis at the SAME TIME. When they finished restarting the iPad Mini saw and connected to the new network almost immediately.

Wud i able to video chat in my ipad4 by skype from abroad if i have got network connection

wud i be able to video chat by skype on my ipad 4 from abroad if i have got the network connection from local carrier.

Correct Phil. On my annual trips abroad that is the way I use my iPhone. I turn off data roaming and use WiFi only. My bills have never been any higher then they normally are that way.
In case of am emergency, I would enable data roaming and pay the charges.
Most hotels has WiFi where I have stayed, Israel, Germany, Greece, Italy and Ireland.
To Agil123
It is my understand that if you get internet connection from local carrier, you will be charged roaming fees from your regular carrier which can be extremely costly. If you wish to use Skype only do it with WiFi to prevent roaming charges.
Allan

How can I get network connection when booting from usb stick or dvd

Computer: HP Pavillion P6-2450eo
Secure Boot disabled
Legacy Boot enabled
Thruogh F9 I can boot in uefi mode from DVD and USB stick but I can't get at network connection from the loadet program. I have tried with Ubuntu 13.04, Linux Mint 15 and Boot Repair - all with same result.
How can I get the programs to boot with network connection?
On beforehand thanks!
poul1304
This question was solved.
View Solution.

Please verify that the programs (Ubuntu, Mint, Boot-Repair, etc.) you are attempting to use, support the Atheros AR8161L gigabit ethernet controller natively. Not all operating systems and software programs support every network device and/or configuration otut of the box. Many times, specific drivers must be loaded or injected into the OS for a device to function properly.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Time Machine backup causes network connections to fail

We have a simple network with OS X Server (10.6.4) + a 10.6.4 Mac client and a Windows XP client. For some time we have been suffering sporadic drop outs of the network connection from the iMac OS X client to the server: the shared drives just disappear and you can't reconnect.
I have now narrowed this down to a problem with Time Machine. By logging on as a user on the OS X Server I was able to observe that the user session on the server suffered the same problem sometimes and this ONLY happens when Time Machine is running - I think its always when Time Machine is backing up the server.
Its an absolutely infuriating problem and very disruptive for our business. I am loath to switch off Time Machine on the server but don't know what else to do. Has anyone else experienced this problem or got any ideas?
Message was edited by: davidav

Yep, Rikakiah, seems you are right, I am not alone! There are two other threads here which discuss the same issue:
http://discussions.apple.com/thread.jspa?messageID=11539266&#11539266
http://discussions.apple.com/thread.jspa?messageID=11539227
From my testing it seems that the problem may be related to some interplay between Time Machine and LDAP - I say this because I can sometimes clear the problem and regain access to my shares by going into Workgroup Manager, removing the group assignments (which give access to the shares), saving the change, then adding the group assignments back.
This made me think that your solution should fix it, but unfortunately although I have excluded /var/db from Time Machine backups, I am still sporadically getting the problem.
Message was edited by: davidav
Message was edited by: davidav

How to monitor my shared network connection

Hi,
I have a mac mini server which I'm using (among other things) to share my internet network connection (from the ethernet adapter) with other wireless clients through the wireless adapter. This works fine.
My question is: how do I monitor how many clients are attached to the wireless network?
Thanks!

The answer to your question also depends on whether you want to monitor which of your friends etc. is online, or whether you want to monitor for malicious users/attackers.
In the first case the DHCP client list ist quite ok, in the second case it wouldn't help you: An attacker would probably not query your DHCP server, he would just listen to some traffic and could then (a) choose a seemingly free IP from the network, (b) hijack an existing IP and MAC address (or of course (c) decide to use the DHCP server after all).
You can use tools like TCPDUMP, ETHEREAL or KISMAC to scan the traffic on your WLAN, but since an attacker that has cracked the WEP key could change his MAC address to that of one of the other computers, intrusion detection is difficult. With respect to protection the best advice probably is the one about using more secure methods than WEP...
Quad G5 / Mini G4 / PB15 G4 Mac OS X (10.4.5)

Deleting network connections

How to I make Mac forget (erase) previous network connections?
When I bought my iMac two months ago, I networked it (via ethernet) to my old PC in order to transfer files between both computers. I set this up using the wizzard that launched automatically as part of the computer setup process.
Up until now, the connection established itself automatically. As of yesterday, I can't connect to my PC from my Mac. I keep getting the following error message "There was a problem connecting to the server "XXX". Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator."
I have googled this to death, and can't seem to find a solution that works. So, I figure the best way would be to re-create the network connection from scratch. Problem is, the Mac doesn't seem to want to forget. Each time I try deleting using System Preference > Network route, the former network keeps re-appearing in Finder.
This is very aggravating.

Try control clicking Raid then click Remove. That way it's not being moved to the Trash, just the Finder window.
If that worked, do the same for Raid backup.

Help with Oracle 10g Client Connectivity from Linux to IBM SAN storage

Hello Oracle Experts,
This is my first post. My client is having oracle 10g database up and running in IBM SAN storage.
We have some NMS tools running in Red Hat Linux version 5. So, these tools require connectivity to Oracle database which is residing in SAN storage connected with the Fibre cables.
How do I establish the connectivity from Linux to SAN storage. If would be glad if you can explain me the steps and also if there is any pre-installation/post-installation, patches and procedures involved.
If it is IP based network we normally give the IP address of the host running the database server. I have no idea about SAN storage connected with Fibre cable.
Please guide me to establish the connectivity from linux 5 to SAN.
Thanks.
Regards,
RaviShankar.

user13153556 wrote:
Hi Rajesh,
Actually I will not be touching the Oracle instance SAN box directly. I will only access the database from another machine. I my case it is Linux box.
So, my question is how do you make the Oracle Client in Linux box to connect to Oracle instance running in another non ip based machine SAN storage.Install Oracle client on this Linux machine ..
Make sure you have network connectivity from linux machine to database server. You need to connect to server where db instance is running and you need not to bother about SAN storage.
make tns entry into client $ORACLE_HOME/network/admin/tnsnames.ora file.
Use sqlplus to connect to database using client.
Regards
Rajesh

Ethernet Intel(R) 82579V Gigabit Network Connection prblem

Hello!
My laptop (HP Probook 6570B, with Windows 8.1 64 bit) doesn't recognise the ethernet driver. The driver is showing a code 10 error ('this device cannot start').
I tried to uninstall the driver and tryed the hp latest network driver as well as the latest original driver from Intels website.
PCI\VEN_8086&DEV_1503&SUBSYS_17AB103C&REV_04
PCI\VEN_8086&DEV_1503&SUBSYS_17AB103C
PCI\VEN_8086&DEV_1503&CC_020000
PCI\VEN_8086&DEV_1503&CC_0200

Hi:
Try manually installing the driver as follows.
First, download and install this free file utility.
http://www.7-zip.org/
Then download and save the W8.1 Ethernet driver file from Intel.
http://downloadcenter.intel.com/download/23071/Network-Adapter-Driver-for-Windows-8-1-
Now right click on the Intel driver file and select 7-Zip from the menu.
Have 7-zip Extract to, and I let it extract the file to the name of the folder (PROWinx64).
Then go to the device manager and click on the problem ethernet controller.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option, and then at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
Click on Have Disk and browse to: PROWinx64\PRO1000\Winx64\NDIS63\e1c63x64, and select the Intel(R) 82579V Gigabit Network Connection from the list and see if the driver installs that way.

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

How do I stop InDesign from trying to create a network connection?

I have a huge problem, either with InDesign or Apple I am not sure.
Basically when I bring my computer home from work every time I open InDesing it tries to connect to a server and I get this error message: the server XXX.local may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Why is InDesign trying connect to a server? Photoshop and Illustrator work perfectly well and function as a normal program. Indesign has no reason to do this as it should need to work through a server.
I get this error message and once I have dismissed it, it comes back after a few seconds and then stalls my computer again.
I really hope that someone can give me some idea of what is happening because the support in my country have not been at all helpful. I am asking this same question on the Adobe forums.

I get no messages from ID for InDesign or anything else and I am running CS5. I can't install Little Snitch because it is a work computer and my IT won't let me me do it. They have mentioned reinstalling it but our IT department haven't said anything more than that and frankly I don't think they would register as an issue that needs fixing as such.
The drive it is looking for is the timecapsule.local which I have turned off and on again and nothing has helped.

How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
i use Firefox 22.0 on windows 7
it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
Image of the Error:
http://home.sums.ac.ir/~rowshansh/firefox.png
http://www.sums.ac.ir/~rowshansh/firefox.png

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

Losing network connection and NIC acts weird from warm/hot weather/temperatures?

Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:08 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:20 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource   Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF   ATI Radeon HD 4800 Series
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21   OHCI Compliant IEEE 1394 Host Controller
IRQ 21   TechniSat DVB-PC TV Star PCI
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16   Standard Dual Channel PCI IDE Controller
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16   ASUS TV880 Video Capture (NTSC)
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF   Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF   ATI Radeon HD 4800 Series
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF   ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF   System board
Memory Address 0xFED90000-0xFED93FFF   System board
I/O Port 0x000003B0-0x000003BB   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB   ATI Radeon HD 4800 Series
[IRQs]
Resource   Device   Status
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21   OK
IRQ 16   ATI Radeon HD 4800 Series   OK
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37   OK
IRQ 16   Standard Dual Channel PCI IDE Controller   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A   OK
IRQ 16   ASUS TV880 Video Capture (NTSC)   OK
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio   OK
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40   OK
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC   OK
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 21   TechniSat DVB-PC TV Star PCI   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35   OK
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20   OK
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26   OK
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C   OK
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36   OK
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34   OK
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A   OK
IRQ 20   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 22   TechniSat DVB-PC TV Star PCI #3   OK
IRQ 0   System timer   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 13   Numeric data processor   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 12   Microsoft PS/2 Mouse   OK
IRQ 14   Intel(R) ICH10 Family SMBus Controller - 3A30   OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

Network connection from 10.2.8 to 10.5.1

Similar Messages

Maybe you are looking for