Network connection timeout during iPhone upgrade

This topic has been mentioned many times but it seems there are still many unresolved cases. So here's another appeal for help, maybe someone will go "AHA" !
I have disabled my firewall by stopping the service. I disable my anti virus software. My connection is hardwired. The connection is FiOs and very fast. The computer is pretty "vanilla" as I don't tinker with it. Another phone/computer in the household is able to upgrade.
The download appears to finish but fails in the processing file step. I assume there is some additional communication back to apple at this point that is timing out for some reason.
Can anyone suggest a workaround? Or perhaps a suggestion of some other windows or network settings that can cause this failure. Something on my system is clearly blocking the communication as I have never been able to upgrade on this computer.
Thanks.

Hi
I have the same problem. After waking up the MBP from sleep, my connection to my external Volume via AFP is lost. (ML 10.8.2.)
Though i checked a lot of forums, but didn't find out how to solve this problem.
I hope, somebody will find a solution …
Cheers
Alex

Similar Messages

  • "network connection timeout" while downloading file or updating software

    Hello!
    I have a MacBook pro with Lion 10.7.5 and I recently notices the error msg "network connection timeout" poping up everytime I download a file larger than 200mb or do an update on garageband!!! I use VPN at home (student) and downloading stuff goes smoothly on my windows computer. I do not have any sort of anivitus installed on my Mac, nor have I its firewall turned on!! I have tried downloading with both Safari and Chrome and get the same error with both. I have also used both cable and wifi, but no difference whatsoever!!  Any suggestion or help would be much appreciated!!! thank you!

    Thanks for the advice. I already upgraded my own iPhone 3GS and yes there seems to be a big drain on my batt life.
    What I'm more concerned for my friend is the updates in future future for her iPhone, say a better iOS 5 version?
    Why is there such a connection time error when she tries to update via iTunes?

  • Network Connection Timeout when "Chkng for available downloads" from iTunes

    I have been struggling with this problem for weeks and have spent a significant amount of time trying to diagnose and fix without success.
    When I select “Check for Available Downloads” through iTunes, I receive a “Network Connection Timeout” message and iTunes fails to download any information. It does ask me to validate my access with a password before it fails.
    This problem initially occurred after I purchased the iTunes Plus updates for my music library. It backlogged about 70 updates that are now sitting in the queue to be downloaded to my local iTunes library. However, since I made that purchase, I have not successfully been able to do any downloads from the iTunes store. I suspect that the volume of items in the queue is related to the problem (as a trigger or the cause).
    I have also tried to buy a single song. Although the purchase is successful (it charges my card and adds the song to the download queue), it doesn’t successfully download the song. I cannot, at this time, even get to a point where I can display a list of the queue for download. It always fails when trying to access that available download queue.
    Podcast downloads still work fine through iTunes. I have never had problems with the store before and have done very large downloads (e.g. audio books) in the past. I have had no changes to my configuration leading up to this problem.
    I am running a relatively new computer with a clean install of Windows 7, plenty of memory and very fast processors. I’ve got high capacity DSL. The connection is wired from the router into my network card (not wireless).
    I have tried a number of things as noted below and the problem still occurs:
    1. Confirmed access to internet, and ability to download from other web sites without timeout
    2. Confirmed my ability to access the iTunes store, change my personal information, browse songs
    3. Confirmed ability to download podcasts
    4. Deactivated my windows firewall, antivirus and Net nanny content protection.
    5. Deactivated the router firewall, and placed my PC in the DMZ of the router (which means that it should be wide open to the external network).
    6. Swapped out the DSL modem for a different DSL modem and completely removed the router from the configuration.
    7. Checked my drivers on the network card and made sure they are up to date.
    8. Ran Windows 7 network diagnostics – no problems detected
    9. Ran iTunes network diagnostics – no problems detected
    10. Uninstalled all software related to iTunes and reinstalled most current versions (iTunes, Quicktime, Bonjur, etc.)
    Thoughts?

    have the same problem...still waiting
    http://waugh.cchem.berkeley.edu/licence/faq/13/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/14/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/15/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/16/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/17/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/18/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/13/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/14/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/15/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/16/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/17/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/18/index.html

  • When trying to update iPhone 4 to IOS 4.3, keep getting  "network connection timeout" message.  Help!

    Using iTunes and my iPhone 4 IOS 4.1 I keep getting a "network connection timed out" message.  At a lost on what to due.
    Any help appreciated.

    HUGELY FRUSTRATING!! Getting a "network connection timed out" error after waiting three hours for the download to complete is unacceptable.  Had this problem running Windows 7 on an HP wireless laptop, IE 8, and Microsoft Security Essentials as my anti-virus.  I had  just updated my iTunes to the latest version so I didn't want to wipe out the whole thing and re-download as some boards suggested (I'd also tried that last year on another computer that did the same thing on an iPod update - didn't work).  I also did not want to totally disable my anti-virus program.
    After reading many discussions online about the problem, here's what worked for me on the first try.  You need to add some Apple and Verisign addresses to your Trusted Sites in Internet Explorer:
    In Internet Explorer go to Tools, Internet Options, Security tab.  Click on Trusted sites, then click the Sites button. I also unchecked the "disable server verification (https) for all sites in this zone" box (under the box that will show your trusted sites).  Here's what I added.  (The underlining here is not mine - done by this site reading my entries as internet addresses.  They won't underline  when you enter them in trusted sites):
    http://albert.apple.com
    http://ax.itunes.apple.com
    http://deimos3.apple.com
    http://evintl-ocsp.verisign.com
    http://evsecure-ocsp.verisign.com
    http://gs.apple.com
    http://itunes.apple.com
    http://phobos.apple.com
    Worked like a charm!!  This list was culled from several posts from several different discussion forums. I then closed out IE, restarted my computer (just in case :-) ),and updated through iTunes without a problem!

  • Problem downloading ios 5 - connection timeout during processing

    After waiting 6mins for the ios 5 download, it reaches the last stage 0.01kb before completion with the message 'processing' and then it cancels and I get a message saying 'connection timeout error'. All my other internet services and downloads are working fine. I have installed and reinstalled itunes 10.5.
    Is anyone else experiancing this? And what can I do??

    Interesting all the issues with upgrading to IOS 5 for the IPhone 4. When I upgraded mine several weeks ago it took 3 attempts then worked. My daughter has had no end of trouble with hers....15 20 times, keeps coming up with errors. Same issues as everyone else. Just tried one fix that was noted.......turn off firewall and bingo all worked. It is a pity issues like this aren't recognised by Apple and resolved.....Anyway one happy IPhone 4 user. Thanks guys

  • Network connection timeout

    I recently installed the Iphone update 4 and lost all of my music because of it - it was not backed up.
    I need to try and get it back.
    So I right clicked on purchased and went to available downloads and then I got an error message saying "could not complete your itunes store request. The network connection timed out - please check networking settings" or words to that effect.
    I can access itunes store through itunes so it is most strange.
    I am using a 3 internet dongle if that is a problem in any way.
    Please help

    I have the same thing happen to me. My network is very good and only used by my family. Plus the internet connection is to broadband, so I should have this happen. Anything, is it can take up to 3 tries before podcast will download to iTunes. Also, the podcasts take a long time to download like 30 mins. for 4.5 MB, which should be happening either. So does anyone have any ideas what is going on?
    Thanks.

  • Handle WSDL data connection timeout during PDF generation

         I have created in LiveCycle Designer XDP template. In template i defined WSDL Data connection. For data loading i call xfa.connectionSet.WsDataConnection.execute(0).
         For PDF generation i created LiveCylce process and use generatePDFOutput component.
    If WebService works output service generates document with all data - OK.
    If i turn off webservice and run process ouputservice generates PDF document with empty fields. Is where any possibility to raise execption to calling process if WSDL connection timeouts or gives SOAP fault error in response? 
    I want catch web service errors in process and do not generate PDF if some webservice used in PDF template is not accesible during generation.

    Hi Martin,
    We are experiencing the same issue with SAP/Vertex. Can you let me know how you resolve this? Did you change the SAP gateway timeout parameter? If so, which one is it?
    Your help on this is greatly appreciated.
    Thanks much!
    Best regards,
    Cyanna

  • Network connection reset during download of a season. Now one episode won't work.

    I bought a season of Entourage and during the download the "network connection was reset." Now one of the episodes won't play right, eg. there is green stuff on the screen during the part that works and it won't even play past about 8 minutes. Is there anything I can do to have this fixed?

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • Airport does not detect wireless network; it says problem = [network]"connection timeout"

    It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
    This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

    i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

  • Connection reset during firmware upgrade

    I have a Linksys WRT54GS (v5) router. I noticed that my firmware was outdated and tried to upgrade it tonight. During the upgrade progress, the browser reset the connection and now  cannot access my router configuration pages.
    I did a hard reset. Then I did the 30-30-30 reset.
    The reset worked but no matter what I do, I cannot navigate to any readable page within the router. I get the log in box and successfully log into the router. However, the configuration page(s) are all jumbled and devoid of useful information. It almost looks like a web page that needs flash to be enabled. Lots of colors and boxes but no text or links to other configuration pages
    I know it's an old router but it has served me well. I would love to reinstall the old firmware (or new!) and copy my saved configuration file back to the router.
    Is this a hopeless situation?
    Is there a way to access the configuration via a command line interface?
    Please, any help would be greatly appreciated.
    Solved!
    Go to Solution.

    Actually, thanks for your answer but I posted too soon. I just found a solution to my problem.
    Rather than try to rewrite the original persons instructions, I will copy and paste them below.
    I found this fix on the following site:
    http://en.kioskea.net/forum/affich-87540-can-t-view-linksys-router-web-page-wrt54g
    Scroll down to the Comments section and find the one by "elmo21". The find the reply by "Lynn". I hope this helps someone.
    It worked like a charm for me:
    Lynn - Dec 12, 2009 2:59pm GMT
    Hey guys,
    I was faced with similar problem, that the page 192.168.1.1 can't seems to load properly. After surfing the net in search for solution, i finally got the answer! Now i can access the page without problem.
    The problem is likely due to router firmware issue. This is what you can do.
    1) Go to http://www.linksysbycisco.com/APAC/en/support to search for your router model, and download the latest firmware
    2) Go to http://www.idealinternet.co.uk/restore-linksys-firmware.tpl and download the linksys-tftp.exe available on that page
    3) Run the linksys-tftp.exe program. Key in the details as below:
    Server : 192.168.1.1
    Password : admin
    File : <look for the firmware file that you had download earlier>
    4) Click Upgrade
    5) You should be able to see the progress bar that shows upgrading in process and eventually, it will show a message that firmware had been upgraded
    6) After that, try going to the page 192.168.1.1 . Leave the username blank and key password as admin
    7) The page should load nicely after the firmware had been upgraded successfully!!
    Hope the above works for you guys!!

  • Network Connection Timeout..after its downloaded.

    This is ******* me off. I spend a useless $10 to babysit my computer because these morons running the servers can't seem to fix them. It amazes me that this happens EVERYTIME a new update is released and they fail to fix the problem. This is why the Zune is far superior. Anyway, I'm stuck with my piece of junk iPod and I made the mistake of buying the 3.0 update. Everytime it fully downloads, but at the end it says "Could not sync to iPod, network connection timed out." Or something like that.
    my firewall is off.
    antivirus on low settings.
    process manager off.
    brand new installed itunes.
    ipod is connected.
    network connection works.
    network connection is not slow, nor is it timing out in real time.
    error code: err= -3259
    ipod is 2nd Gen
    enough space on hard drive by far
    Ive now tried to download this sht on four occasions, hours apart. this is getting ridiculous. I would call support but they are probably bogged down and I will probably have to pay to talk to some guy who barely speaks english. woopie.
    So, in conclusion. Give me my update or give me a refund. I've been more than patient. Or, if someone has a solution to this problem, help me out!

    Hi Jared...same happened to me last night. Were you able to fix the problem? Anybody???

  • WinPE fails every time after "preparing network connections" message during Build & Capture task sequence

    Sorry, I'm using SCCM 2012 but can't find a forum for that ANYWHERE, so I'm posting this here:
    We're making our first attempt at OSD (build & capture) on an out-of-the box Dell Optiplex 9010 all-in-one. I've injected the NIC drivers found
    here on Dell's Enterprise support blog into the boot image.
    Using PXE boot, the machine starts up in WinPE when we deploy the task sequence, but every time it reaches the "preparing network connections" message in the splash screen, WinPE quits and the machine reboots.
    I've hit F8 to get the command line while WinPE is booting, and from running ipconfig there, it looks like the machine takes a long time to pick up its IP address from DHCP, but it DOES pick up an IP address eventually which implies to me that the NIC driver
    is at least somewhat working.
    See below for the wpeinit.log file from this machine. What am I doing wrong? What's that message about "no operational adapters found", expecially when I've verified that it does get an IP address (albeit after a short while)?
    BEGIN WPEINIT LOG:
    Info      No unattend file was found; WPEINIT is using default settings to initialize WinPE
    Info      ==== Initializing Display Settings ====
    Info      No display settings specified
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Initializing Computer Name ====
    Info      Generating a random computer name
    Info      No computer name specified, generating a random name.
    Info      Renaming computer to MININT-S90VG8D.
    Info      Acquired profiling mutex
    Info      Service winmgmt disable: 0x00000000
    Info      Service winmgmt stop: 0x00000000
    Info      Service winmgmt enable: 0x00000000
    Info      Released profiling mutex
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Initializing Virtual Memory Paging File ====
    Info      No WinPE page file setting specified
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Initializing Optional Components ====
    Info      WinPE optional component 'Microsoft-WinPE-WMI' is present
    Info      WinPE optional component 'Microsoft-WinPE-WSH' is present
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Initializing Network Access and Applying Configuration ====
    Info      No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
    Info      Acquired profiling mutex
    Info      Install MS_MSCLIENT: 0x0004a020
    Info      Install MS_NETBIOS: 0x0004a020
    Info      Install MS_SMB: 0x0004a020
    Info      Install MS_TCPIP6: 0x0004a020
    Info      Install MS_TCPIP: 0x0004a020
    Info      Service dhcp start: 0x00000000
    Info      Service lmhosts start: 0x00000000
    Info      Service ikeext start: 0x00000000
    Info      Service mpssvc start: 0x00000000
    Info      Released profiling mutex
    Info      Spent 1310ms installing network components
    Info      Installing device pci\ven_8086&dev_1502&subsys_05431028 X:\WINDOWS\INF\oem1.inf succeeded
    Info      Spent 10437ms installing network drivers
    Info      QueryAdapterStatus: no operational adapters found.
    Info      Spent 10140ms confirming network initialization; status 0x80004005
    Info      WaitForNetworkToInitialize failed; ignoring error
    Info      STATUS: SUCCESS (0x003d0001)
    Info      ==== Applying Firewall Settings ====
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Executing Synchronous User-Provided Commands ====
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Executing Asynchronous User-Provided Commands ====
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Applying Shutdown Settings ====
    Info      No shutdown setting was specified
    Info      STATUS: SUCCESS (0x00000001)

    This turned out to work for me, too! It was nothing to do with network switch configuration, per se-- or at least I didn't have to change anything on my switch to fix it. Instead I tried fusiongroup's method of getting into the command-line before the WinPE
    boot hit the "Preparing network connections" step, and I repeatedly ipconfig /renewed until suddenly the TS reached the next step of the sequence instead of failing out.
    I also made this an "Available" sequence instead of a "Required" sequence, which I think buys you a little time in terms of offering a GUI in WinPE for the sequence, instead of just trying to run it.
    One last thing: I was running this on a Workgroup machine that is not joined to our domain; I had followed another tutorial to get the client installed on it even though it's outside the domain. Prior to trying the command-line fix fusiongroup gave, I also
    went into Assets and Compliance in Configuration Manager and right-clicked the machine in the list of devices, and found that I had to "Approve" it for management by SCCM. Don't know if that helped as well.
    Sylvie Andrews

  • Ipad: no network connection so can't upgrade

    I have an iPad1 and am running 5.0.1 and it works just fine - I have latest iTunes and OSX 10.7.3 and was trying to update the iPad to latest OS [5.1] - despite everything it would not do so.  I got a message when I hit Update that there was no network connection =  I followed all the tech shooting suggestions - made sure all software updated, made sure of connections, restarted, unplugged all other USBs - still no network connection.
    I changed cables and that made no difference.  I checked in System Profiler and the iPad shows up there....I turned off WiFi and just connected it by USB and it shows up fine on the L side of the iTunes.  I am able to sync and to backup.
    How can I update my OS??? 

    Do the update via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Problems with WiFi network connectivity post 2.1 upgrade

    Have been having problems with WiFi connectivity since installing the 2.1 upgrade. When attempting to view some websites I get a "Safari cannot open the page because it is not connected to the internet" message. The same addresses can be resolved from my iMac at the the same time. Other websites don't have problems. Funnily enough www.apple.com is one of the effected sites.
    I can also only sporadically gain access to the App store & the iTunes store from the device. I mostly get a message stating - "Cannot connect to iTunes store".
    I am connecting through a WPA encrypted access point. I have tried restoring the device, resetting network settings, etc.
    Has anyone else experienced this? After work tonight I will temporarily set my access point to WEP, just to see if the problem may be related to WPA. I have read that the iPod touch is effected by this.
    Thanks,
    Matt

    No problem. The iPhone uses lower power on the WiFi transceiver to save the battery. It won't have the 50 meter range that one might see for other devices. As long as it works reliably when it is closer to the access point it is working normally.

  • Network connection lost during sleep

    Each time sice upgrade 10.8.2 network connectopn is lost during sleep

    Hi
    I have the same problem. After waking up the MBP from sleep, my connection to my external Volume via AFP is lost. (ML 10.8.2.)
    Though i checked a lot of forums, but didn't find out how to solve this problem.
    I hope, somebody will find a solution …
    Cheers
    Alex

Maybe you are looking for