Network connection timeout error

I have a new computer. I downloaded and installed itunes but when I try to log in to purchase music, I get a "Network is timing out. check your nerwork connection and try again" error. I am operating on Vista. I am able to log onto the internet and my internet provider claims it is not them. Help!!

Bridge Mode is the correct setting for your Time Capsule.
To aid in troubleshooting, I suggest that you temporarily move the Time Capsule close to the Uverse router and connect directly to one of the Ethernet ports on that device. Test to see if your wireless is working.
If yes, then move the Time Capsule again and this time temporarily connect to the Ethernet switch to test that way.
Keep working your way outward, testing as  you go. If the wireless works on the first test when you connect directly to the Uverse router, at some point, you will find the connection problem. It's almost always something simple, like an Ethernet cable that is not making a good connection with one of the Ethernet ports.

Similar Messages

  • Connection timeout error trying to connect to wireless network

    Going nuts...
    I have my Time Capsule plugged into an outlet that runs back to my switch (Netgear) which in turn goes into my modem (AT&T uverse).
    (the switch runs out to about 6 ethernet outlets in my house)
    Everything was working grand until I screwed something up, no idea what, of course!
    I have set my Time Capsule set up...
    In the AirPort Utility
    AirPort tab
    Wireless mode:create a wireless network
    Connect using: Ethernet
    Internet tab
    Connect using: Ethernet
    Connection sharing: Off (Bridge mode)
    From these settings I can see the wireless network I have set up, but I can't connect to it (get a 'connection timeout' error when trying to connect to the wireless network using my laptop)
    When I try to change to Conenction Sharing to: 'share a public IP address' or 'distribute a range of IP address', then I get other errors... (DHCP Beginning and DHCP Ending Address Errors).
    Any advice would be great - thanks! 

    Bridge Mode is the correct setting for your Time Capsule.
    To aid in troubleshooting, I suggest that you temporarily move the Time Capsule close to the Uverse router and connect directly to one of the Ethernet ports on that device. Test to see if your wireless is working.
    If yes, then move the Time Capsule again and this time temporarily connect to the Ethernet switch to test that way.
    Keep working your way outward, testing as  you go. If the wireless works on the first test when you connect directly to the Uverse router, at some point, you will find the connection problem. It's almost always something simple, like an Ethernet cable that is not making a good connection with one of the Ethernet ports.

  • MacBook Pro sees wireless networks but cannot join any. Connection timeout error

    I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
    Internet access via ethernet cable works just fine.

    It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
    There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
    If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

  • Can't connect via Airport -- "connection timeout" error, instead

    I've got a MacBook Pro here, which was successfully connected online via Airport, under OS X 10.4.11.
    Then I upgraded to Leopard (10.5), and the machine would no longer connect automatically to the router.
    OK, I tried manually configuring the wireless connection, but no luck. So, I brought in an old iBook G4 running the same OS (10.5), and successfully linked it to the router, wirelessly, via Airport.
    Copying the procedure that worked with the iBook -- to the MBPro -- did not help. Still getting a "connection timeout" error message.
    So I performed a fresh install of 10.5 -- and I even DLed the Software Updates, including two that were supposed to improve Airport functionality -- and tried again. No luck.
    Any suggestions?
    TIA.

    John,
    I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
    1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
    2. Click Apply and quit System Preferences.
    3. Put the computer to sleep.
    4. Wake the computer.
    5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
    6. Click Apply and Quit the Network Preferences.
    7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
    8. Verify connectivity
    9. Put the computer to sleep.
    10. Wake the computer.
    11. Verify connectivity
    HTH

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Webservice Connection Timeout Error in Sun Java System Application server

    I have a java code to connect to Ebay Shopping Webservice that uses the client stub generated through Axis. The code works fine when I run it from the main method of a stand alone Java application. Which means there is no issue with the Proxy settings or any other network setting that could block the webservice from my system. However when I use the same code inside a JSF based Web Application, a connection timeout error comes up. The Web application is deployed on the Sun Java System Application server. The stacktrace of the exception is
    java.net.ConnectException: Connection timed out: no further information
         at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
         at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:527)
         at com.sun.enterprise.server.ss.provider.ASClientSocketImpl.connect(ASClientSocketImpl.java:206)
         at java.net.Socket.connect(Socket.java:520)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:125)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.ebay.api.soap.ShoppingBindingStub.findProducts(ShoppingBindingStub.java:1217)
         at com.shopping.ebay.EbayServiceUtility.performEBaySearch(EbayServiceUtility.java:66)
         at searchProduct.SearchProductBean.search(SearchProductBean.java:98)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:96)
         at javax.faces.component.UICommand.broadcast(UICommand.java:383)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759)
         at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:113)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
         at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
         at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    The JDK version on my machine is 1.5.0_14. Can somebody point me as where I should be looking for errors?

    You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.

  • Connection Timeout error message - HELP!

    Hi,
    I am so fed up with my internet connection....so here is my story....
    I live above a shop in a rented flat which is owned by the shop owner, he kindly gave me the password for his router so I could use his internet free of charge.
    This has worked fine with 3 different connections he has had since I have lived there and was working with the current one up until about a week ago.....it all of a sudden went off, however it was still showing up as an available network in my networks list, but when I try to connect to it using the password it brings up the 'connection timeout' error message.
    I thought that this was something to do with his router so I brought my friends 3 Huawei E585 wireless internet device round to try that, but the same message appears, HOWEVER my iPhone 4 connects to this perfectly fine with a full signal strength.
    THEN....my Dad took my Macbook and the 3 Huawei E585 device over to his house and my Macbook connected to it straight away??? ....... is there anything in the building that could affect the connection?? - as it seems to be my flat for some reason all of a sudden!? ..... my Dad has suggested it may be some sort of electrical interference if anything new has been installed recently?
    Any help would be GREATLY appreciated as I'm SOOOOOO fed up of not having internet!!
    Thanks

    John,
    I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
    1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
    2. Click Apply and quit System Preferences.
    3. Put the computer to sleep.
    4. Wake the computer.
    5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
    6. Click Apply and Quit the Network Preferences.
    7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
    8. Verify connectivity
    9. Put the computer to sleep.
    10. Wake the computer.
    11. Verify connectivity
    HTH

  • I am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

    i am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

    Thank you very much, i guess it will be the remote servers.
    Then i got this critical error on my local server
    Automatic mail message send from usa12 for SID USA on Fri Dec 15 15:00:01 EST 2006
    DONOT REPLY FOR THIS MESSAGE.....
    Please check the follwing files ( will exist if there was an error )
    /u01/app/oracle/admin/usa/bdump/alert_usa.log.121506.1500 ......
    /u01/app/oracle/product/8.1.7/network/log/listener.log.121506.1500 .....
    ORA-00600: internal error code, arguments: [17182], [27793076],
    I know i need to contact oracle , when i went to Metalink ,i needed to run their RDA it is like diagnostic report script and include it before u send to them.
    I needed some permissions from my Senior so i will do it on monday.
    do you have any suggestions????

  • "network connection timeout" while downloading file or updating software

    Hello!
    I have a MacBook pro with Lion 10.7.5 and I recently notices the error msg "network connection timeout" poping up everytime I download a file larger than 200mb or do an update on garageband!!! I use VPN at home (student) and downloading stuff goes smoothly on my windows computer. I do not have any sort of anivitus installed on my Mac, nor have I its firewall turned on!! I have tried downloading with both Safari and Chrome and get the same error with both. I have also used both cable and wifi, but no difference whatsoever!!  Any suggestion or help would be much appreciated!!! thank you!

    Thanks for the advice. I already upgraded my own iPhone 3GS and yes there seems to be a big drain on my batt life.
    What I'm more concerned for my friend is the updates in future future for her iPhone, say a better iOS 5 version?
    Why is there such a connection time error when she tries to update via iTunes?

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • Network Connection Timeout when "Chkng for available downloads" from iTunes

    I have been struggling with this problem for weeks and have spent a significant amount of time trying to diagnose and fix without success.
    When I select “Check for Available Downloads” through iTunes, I receive a “Network Connection Timeout” message and iTunes fails to download any information. It does ask me to validate my access with a password before it fails.
    This problem initially occurred after I purchased the iTunes Plus updates for my music library. It backlogged about 70 updates that are now sitting in the queue to be downloaded to my local iTunes library. However, since I made that purchase, I have not successfully been able to do any downloads from the iTunes store. I suspect that the volume of items in the queue is related to the problem (as a trigger or the cause).
    I have also tried to buy a single song. Although the purchase is successful (it charges my card and adds the song to the download queue), it doesn’t successfully download the song. I cannot, at this time, even get to a point where I can display a list of the queue for download. It always fails when trying to access that available download queue.
    Podcast downloads still work fine through iTunes. I have never had problems with the store before and have done very large downloads (e.g. audio books) in the past. I have had no changes to my configuration leading up to this problem.
    I am running a relatively new computer with a clean install of Windows 7, plenty of memory and very fast processors. I’ve got high capacity DSL. The connection is wired from the router into my network card (not wireless).
    I have tried a number of things as noted below and the problem still occurs:
    1. Confirmed access to internet, and ability to download from other web sites without timeout
    2. Confirmed my ability to access the iTunes store, change my personal information, browse songs
    3. Confirmed ability to download podcasts
    4. Deactivated my windows firewall, antivirus and Net nanny content protection.
    5. Deactivated the router firewall, and placed my PC in the DMZ of the router (which means that it should be wide open to the external network).
    6. Swapped out the DSL modem for a different DSL modem and completely removed the router from the configuration.
    7. Checked my drivers on the network card and made sure they are up to date.
    8. Ran Windows 7 network diagnostics – no problems detected
    9. Ran iTunes network diagnostics – no problems detected
    10. Uninstalled all software related to iTunes and reinstalled most current versions (iTunes, Quicktime, Bonjur, etc.)
    Thoughts?

    have the same problem...still waiting
    http://waugh.cchem.berkeley.edu/licence/faq/13/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/14/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/15/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/16/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/17/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/18/map.html
    http://waugh.cchem.berkeley.edu/licence/faq/13/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/14/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/15/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/16/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/17/index.html
    http://waugh.cchem.berkeley.edu/licence/faq/18/index.html

  • Connection timeout error in web report(portal)

    Hi Experts,
    Points to note about the 500 connection timeout error
    1. Error persists only in portal. query/ report works fine in RSRT and Bex Analyser.
    2.As per previous discussions tried implementing SAP notes to change ICM parameter for max of 10 minutes.
    However, it is said by Basis team that they can change parameter only if all the report gives the same error.
    Since all the report works fine they are nt ready to change the parameter.
    4. Error: Time exceeds 600seconds
    5.This issue arised only after upgrading the system to 7.3. post - upgrade. this report was working fine before.
    6. Even in the portal, report works fine when we use ABAP web link.
    Please share your suggestions.

    In the trace file there is a error message for this report "Could not find a command, masscommand or group command with alias <new task>. It is defined in group . <TaskCollectionGroup>. pls any one help me. This is for 7.31 NW portal

  • Iphone 5 Screen is Frozen Connection Timeout Error Connection to this app has timed out

    I upgraded to IOS 7 just a few hours before my Iphone 5 screen froze and I cannot make changes -  I have a Connection Timeout Error with Connection to this app has timed out.  With Ok in blue.  The screen doesn't respond,  I can turn off the phone, tap OK or do anthing.  Any advice on how I can reset or fix?

    Check for any anti-virus or anti-spyware software you might have. Temporarily disable that to continue. Normally this is what will cause a timeout. I assume you have a good Internet connection?

  • When connecting to wifi, I get a "Connection timeout" error message.

    I'm trying to connect to a WEP password wifi signal. I have the password, but when connecting, I'm getting a connection timeout error message. Please help?

    I'm having the exact same problem. Yesterday it was fine, but today, I get connection timeout error message. Help?

  • Network connection reset error

    I am struggling to effect any software updates or downloands.  I get a "network connection reset" error.  I have failed to update iPhone software, even YouTube videos seem to hang at about the 50% mark.  I do not have anti-virus and have inserted new DNS info.  It makes no difference if I use Airport or Ethernet cable.  Have uninstalled and rteinstalled iTunes.  Am at a loss. Help please!

    I even uninstalled Trusteer banking security software....
    Did you use the developers uninstaller to ensure you fully eradicated it from your system. Trusteer's Rapport has a bad reputation on here for mucking things up. Here's a quick search of just these forums:
    https://discussions.apple.com/community/desktop_computers/search.jspa?peopleEnab led=true&userID=&containerType=&container=&spotlight=false&q=Trusteer
    Also, just to rule out the fireall possibility, have you tried turning off the firewall and testing?
    Edit: You don't have anti-virus installed, but do you have anything such as Little Snitch or Peer Guardian running?

Maybe you are looking for

  • How do I use iPhoto to get photos into 3G phone?

    Hi, I was wondering how best to import images into my iPhone 3G for viewing. Most of my image files are large high quality 2 -4 MB files. Is there an easy way to downsize the files for viewing on the iPhone 3G? Does iPhoto have a setting specific for

  • How can I change the background color of a chart?

    How can I change the default black background color of a chart to white? Thanks John

  • ITunes in Windows XP 64 bit not recognizing my iPod Touch

    I recently switched to XP 64 bit and after much much messing around I finally got itunes installed and running (how is a whole nother thread's worth that I'll see about answering later). But now it won't recognize my iPod Touch. Any suggestions on ho

  • Standard input help in zreport selection screen

    Hi All,    I am having a selection sceen like S_PERNR FOR PA0001-PERNR.    when I put f4 help then it is comming right and showing the value   of personnel number which is correct.    But when you execute the transaction PA30 and select f4 help in pe

  • ME21N to Add New Screen Fields ME_GUI_PO_CUST.

    Hi All,         Req : To New TAB with Custom Fields for ME21N.                  I Created a Custom Module Pool Prog with Reruired SUBSCREEn.                  I am able to See the TAB but Unable to See the SUBSCREEN                  and it is Displayi