Network Controller Driver not found, hp proBook 4530s, Windows 7

I am using a notebook (proBook 4530s), with Windows 7, 64-bit,  and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Similar Messages

  • TECRA R850 - wireless network controller driver not found

    Hi,
    I re-installed my computer, since then it doesn't recognize any wireless device or network
    here-after is part of the result of the Toshiba diagnostic tool
    The device manager states that:
    " The drivers for this device are not installed. (Code 28)
    There is no driver selected for the device information set or element.
    To find a driver for this device, click Update Driver.
    However I cannot manage to find the driver, after updating the Windows updates, etc
    Please help!
    Thanks
    lavver
    Date 2013/03/15 22:55:35
    [PC Information]
    Model Name TECRA R850
    Part Number PT524E-005014BT
    Serial Number 4B021792H
    OS Version Microsoft Windows 7 Professional 6.1.7600
    BIOS Version Version 3.60
    CPU Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz
    Physical Memory8192MB RAM
    Hard Disk Capacity304,562,036,736 [Byte] 283.646 [GB]
    Hard Disk Free Space Capacity126,578,688,000 [Byte] 117.886 [GB]
    Video Intel(R) HD Graphics Family version=8.15.10.2291
    Screen Resolution1366 x 768 Pixels
    Color Quality True Color (32 Bit)
    Sound Realtek High Definition Audio version=6.0.1.6271
    Intel(R) Display Audio version=6.14.0.3074
    Network Intel(R) 82579V Gigabit Network Connection version=12.2.45.0 MAC Address=E8:9D:87:EA:3C:21
    HUAWEI Mobile Connect - 3G Network Card version=6,0,1,279 MAC Address=00:1E:10:1F:82:A7
    Modem HUAWEI Mobile Connect - 3G Modem version=2.0.6.706
    Internet Explorer9.0.8112.16421
    IDE Device Hitachi HTS723232A7A364
    MAT****A DVD-RAM UJ8A2AS FW version=1.00
    [Diagnostic Results]
    CPU TEST DONE PASS
    MEMORY TEST DONE PASS
    Enhanced Host Controller - 1C2D)
    Enhanced Host Controller - 1C26)
    i.LINK TEST DONE NOT FOUND

    Your Tecra has ATHEROS 802.11(B/G/N)WB195-HMC W/ BT WLAN card inside and all latest drivers you can find on Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
    Check it out please.
    It is card with BT so before you install WLAN driver install BT filter. You can find it on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  • Network controller& USB controller driver not found and wifi not working

    hello  I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop  .  i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not  working  i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly  univeral serial bus driver(usb) controller   not found i installed all drivers from above link  also update windows  but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download  AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU    

    Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted.  Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
    [BROADCOM.NTx86.6.1]
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C       
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

  • The realtek Network Controller was not found. WIN10

    Hi, Need a little bit of help. Laptop is SATELLITE P50-B. Wifi - not detecting any network. Wired - still no networkchecked device manager, network driver is present no bang, not disabled. tried to uninstall it and restart the laptop and still same thing. tried to uninstall it and download the driver from the support website and still same thing. so i tried again to reinstall the driver and this time got a message "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable" First time to encounter that message.

    Hi CB, did you mean PSPNsU or PSPNU only? mine is PSPNsU. And yes i did go to the settings already to make sure that its on. Interesting part is I tried my ethernet cable already and still it doesn't detect the connection.

  • K7N2 MS6570 Video Controller- driver not found

    Hello All,
       After a clean install of W2K all of a sudden the Video Card and my Intel V.92 Modem weren't being detected.  I got the modem to install by going into device manager and deleting the yellow question mark for PCI Simple  Communications Controller but no matter what I have tried I still get a yellow question mark for Video Controller (VGA Compatible) in device manager.  The driver can't be found on the Mobo Disk, in W2K sp4, Video card driver disk.  All say not found or no such driver.  Also the video card is showing up on POST but after that, nothing, no where is it being detected.
    I have taken out and reseated the video card, cleared the CMOS, been into BIOS to check that ESCD was set to Auto, booted into Safe Mode and tried to get it detected from there, nothing has worked.  Specs for the system are:
    AMD Barton 2800+
    512 MB DDR 333 PC 2700 RAM
    PNY Gforce FX 5200 128 MB
    CDR/RW
    Lite On DVD ROM
    K7N2 MS6570 Mobo
    W2K SP4
    500 watt PSU
    The reason I say I think something has really gone wrong is that prior to the reinstall of W2K everything was working just fine, better than I ever expected it to work.  No hardware was put in or taken out, the system wasn't even opened up for anything, just a clean reinstall of W2K.  If anyone has any suggestions at all I would really appreciate it, I'm about at my wits end here.  
    Thanks very much,  LG;)

    Hi,
    Have you DirectX installed? - If not download and install it. Also, have you tried installing latest video card drivers - from either your Video card manufacturer or nVidia's website?
    Sometimes it's better to run the driver's auto-install program, rather than allowing Windows to look for the driver itself - AFAIK, the install procedure unpacks all it's files to hard drive then accesses this directory in order to install the drivers (this is the case with ATI software, anyway.) I suspect your drivers on CD are packed - this is why Windows can't find them.
    Axel  

  • System Image Recovery from Network Drive - not found

    Hello all!
    I have been routinely backuping my OS and important files using Windows 7 backup on a NAS. It just so happened that I needed to re-image my OS drive and I got into the Windows 8 recovery boot sequence.
    I booted from a windows 8 USB stick and Under the Advanced tools I selected the System Image Recovery and tried to look for the system image on the network path. Although the prompt said it was connecting to the network , the network share was
    not found. the command prompt couldn't ping google.com and netsh wlan <SSID> command did not work in hopes of connecting to my local wifi.
    Is there a way to connect to the wifi network where my NAS is connected to in order to re-image from the system image found on the NAS? Luckily , there was an older image on a separate local HDD that I could re-image from but I would prefer if
    I could connect to the NAS during the recovery process.
    Any help is greatly appreciated.

    Hi,
    First, I have to say that in WinRE, http and wifi is not supported, that's why you cannot ping google and connect to wifi.
    To access NAS, we have to make sure that your network connection is wired, and try to manually location the NAS via
    \\IP address\...
    I will check if the Windows 7 image backup can be restored in WinRE of Windows 8, and update your soon.
    Edit:
    I have tried this, and it appeared that to restore Windows 7 image backup on this computer from Windows 8 winRE is not supported.
    see following error:
    Kate Li
    TechNet Community Support

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

    My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
    Thanks!!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L775D
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2013-01-08 11:16:27.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD Radeon(TM) HD 6520G   
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod mini running firmware version 1.4.1
    Serial Number:    JQ******S42
    <Edited By Host>

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • MDT user credentials error: Invalid credentials: The network path was not found

    I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
    When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
    After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
    wpeutil InitializeNetwork
    ping localhost
    wpeinit
    Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
    It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
    Have someone can help me?
    Thanks a lot

    Hi,
    Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
    Dell Latitude E5400:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
    Dell OptiPlex 760:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
    Please make sure you add the correct network driver to deployment point.
    Additional Information:
    http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
    http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
    Hope it helps.
    Tim Quan - MSFT

  • Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

    I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
    Richard

    I thought I would add in another scenario, since this link came to the top of my list in the search engine.
    We are running 2008 R2 with SP1 (it happened without SP1 as well)
    We could not map using UNC (IP, FQDN, or netbios name).  We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
    In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
    You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
    And add LanmanWorkstation to Providerorder
    I found on a Citrix board that citrix has an issue with this as well
    If you're running VM  here is an additional step you should do as well
    When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
    > Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
    To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
    To workaround this issue, if you have already upgraded VMware Tools:
    Click Start >
    Run, type regedit, and click OK. The Registry Editor window opens.
    Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
    Delete the reference to
    hgfs.
    Reboot the virtual machine.
    We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
    I hope that this saves people a lot of time.   I spent days researching this.
    This was the solution for me on 2008 R2 DC w/ Exchange.  I do not have VMWare installed but do have Hyper-V.  Thank you so much!

  • An error occurred while reconnecting P: to \\JSERVER\Data Microsoft Windows Network: The network path was not found. This connection has not been restored.

    Almost every day when I open my computer I get this message:
    An error occurred while reconnecting P: to \  \  JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
    We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
    fix this? 

    it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
    I assume you are running a backup of some sort as this is the backup forum..

  • Group Policy Object "The Network Path Was Not Found"

    I should also mention even when I go to click on the currently created policies I get the same error as well, but I seem to be able to at least get into their settings if I wanted too.

    Here is the my background of my network.Try to retire a Windows Server 2003 Domain Controller (DC) and upgrading to a Windows Server 2012 R2 domain controller. Currently both server are running as Domain Controllers on the same subnet.An issue I found today was when I went to go create a new group policy object I got an error stating "The Network Path was Not Found." This happens on both the 2003 and 2012 server, so it not just related to one machine. I have done some reading on this and it seems that some people who have a similar error have an issue browsing to their SYSVOL folder for the domain. However I have no issue browsing to that.I have also looked through the even viewer and there doesn't seem to be specific errors related to this. It seems to me like it may be some type of DNS issue, but I am looking for some insight into...
    This topic first appeared in the Spiceworks Community

  • After start-up "The network path was not found."

    Hi Folks,
    I have a Synology DS214se. I am running Windows 8.1, every time I start up I get the error:
    An error occurred while reconnecting Y: to \\SERVER\home
    Microsoft Windows Network: The network path was not found.
    This connection has not been restored.
    When I go into File Explorer 20-30 seconds after reaching the desktop, I have no problem accessing the NAS, including via the Y: drive. 
    My PC uses the NAS for it's Windows home directories, e.g. Documents, Downloads, Desktop, etc. I wonder if it has something to do with the speed/order at
    which it connects on start up. The result is I never can see my desktop unless I click on it and push F5. I have similar issues when my PC awakes from sleep.
    Is their some way to force windows to connect or set up my Y: drive before doing other things?
    Thank you,
    Delzrock

    Hi Delzrock,
    Would you please let us know current situation of this issue? Just check if above suggestion can help you to solve this issue. If any update, please feel free to let us know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The Network Path was not Found - Server 2008

    I am managing a Windows Server 2008.  When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found."  I am new to using Windows Servers and quite confused as to the problem. 

    Hi,
    This problem may be related to network access. I list some common factors and corresponding troubleshooting steps as below. Please check them one by one and let me know the result.
    1> DNS issue
    From the problematic PC, please run the following commands and then check if the issue still exists:
    1) Can you ping FQDN of the DCs in your networks?
    2) Can you ping IP of all the DCs in your networks?
    3) Does the DNS configuration point to the correct DNS server?
    2.
    1). Start -> run -> cmd
    2) Type nslookup, and then press Enter; Type set type=all, and then press Enter.
    3) Type _ldap._tcp.dc._msdcs.<yourdomainname>, and then press Enter to check the result.
    If SRV records could not be resolved successfully, please type 'net stop netlogon' and 'net start netlogon' to regenerate SRV records.
    2>. Permission
    Ensure you logon DC using the user with domain administrator privilege. If so, please check if you have the proper permission on sysvol files under %systemroot% and inf file under %system root%
    3>. PDC is not available.
    By default, Group policy object editor connects PDC role to enumerate GP settings. Please
    refer to the following article to confirm which DC is PDC role:
    How to view and transfer FSMO roles in Windows Server 2003
    http://support.microsoft.com/kb/324801
    How to view and transfer FSMO roles in the graphical user interface
    http://support.microsoft.com/kb/255690
    After locating the PDC role, please logon it and see if sysvol file under %systemroot%\SYSVOL\ has been properly shared and has the correct structure.
    If not, you can refer to the following KB to rebuilt Sysvol tree.
    How to rebuild the SYSVOL tree and its content in a domain
    http://support.microsoft.com/kb/315457/
    4> We can control which DC is preferable DC that Group policy object editor connects by default via GP, which is User configuration\ administrative template\system\group policy\domain controller selection. Also, please enable it as 'Use any available Domain controller' and run 'gpupdate \force' to test the result.
    If this issue still continue, please post back.

  • Drive not found in library database

    Greetings.
    I'm new to OSB and am having tape drive, volume problems.
    File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
    I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
    Please advise.
    Transcript:
    2014/04/23.11:44:01 ______________________________________________________________________
      2014/04/23.11:44:01
      2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:44:01
      2014/04/23.11:44:01 ---
      2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.11:44:01 drive not found in library database (library manager)
      2014/04/23.11:45:01 ______________________________________________________________________
      2014/04/23.11:45:01
      2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:45:01
      2014/04/23.11:45:01 ---
      2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.11:45:01 drive not found in library database (library manager)
      2014/04/23.11:46:01 ______________________________________________________________________
      2014/04/23.11:46:01
      2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:46:01
      2014/04/23.11:46:01 ---
      2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.11:46:01 drive not found in library database (library manager)
      2014/04/23.11:48:01 ______________________________________________________________________
      2014/04/23.11:48:01
      2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:48:01
      2014/04/23.11:48:01 ---
      2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.11:48:01 drive not found in library database (library manager)
      2014/04/23.11:49:01 ______________________________________________________________________
      2014/04/23.11:49:01
      2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:49:01
      2014/04/23.11:49:01 ---
      2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.11:49:01 drive not found in library database (library manager)
      2014/04/23.11:50:01 ______________________________________________________________________
      2014/04/23.11:50:01
      2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.11:50:01
      2014/04/23.11:50:01 ---
      2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
      2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
      2014/04/23.11:50:01 drive not found in library database (library manager)
      2014/04/23.12:00:01 ______________________________________________________________________
      2014/04/23.12:00:01
      2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:00:01
      2014/04/23.12:00:01 ---
      2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
      2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
      2014/04/23.12:00:01 drive not found in library database (library manager)
      2014/04/23.12:01:01 ______________________________________________________________________
      2014/04/23.12:01:01
      2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:01
      2014/04/23.12:01:01 ---
      2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
      2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
      2014/04/23.12:01:01 drive not found in library database (library manager)
      2014/04/23.12:01:24 ______________________________________________________________________
      2014/04/23.12:01:24
      2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:01:24
      2014/04/23.12:01:25 ---
      2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
      2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
      2014/04/23.12:01:25 drive not found in library database (library manager)
      2014/04/23.12:04:01 ______________________________________________________________________
      2014/04/23.12:04:01
      2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:04:01
      2014/04/23.12:04:01 ---
      2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
      2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
      2014/04/23.12:04:01 drive not found in library database (library manager)
      2014/04/23.12:05:01 ______________________________________________________________________
      2014/04/23.12:05:01
      2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:01
      2014/04/23.12:05:01 ---
      2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
      2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
      2014/04/23.12:05:01 drive not found in library database (library manager)
      2014/04/23.12:05:21 ______________________________________________________________________
      2014/04/23.12:05:21
      2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
      2014/04/23.12:05:21
      Backup started on Wed Apr 23 2014 at 12:05:51
      Volume label:
      Volume tag: LEV018
      Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Volume ID: mf_2min-000025
      Volume sequence: 1
      Volume set owner: root
      Volume set created: Wed Apr 23 12:05:51 2014
      Volume set expires: Wed Apr 23 12:07:51 2014
      Media family: mf_2min
      Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
      Archive label:
      File number: 1
      File section: 1
      Owner: root
      Client host: x4440a
      Backup level: 0
      S/w compression: no
      Archive created: Wed Apr 23 12:05:51 2014
      Encryption: off
      Dumping all files in /etc
      Backup complete on Wed Apr 23 2014 at 12:06:03
      Backup statistics:
      status 0
      devices IBM4_0_0_1_1
      devices 1
      volumes mf_2min-000025
      voltags LEV018
      file 1
      host x4440a
      encryption off
      start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
      backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
      entries_scanned 3373
      kbytes_scanned 40556
      entries_excluded 0
      entries_skipped 0
      mount_points_skipped 0
      files 2047
      directories 315
      hardlinks 0
      symlinks 1011
      sparse_files 0
      filesys_errors 0
      unknown_type 0
      file_kbytes 39264
      dev_kbytes 35977
      dev_iosecs 2
      dev_iorate 18.4 MB/S
      wrt_iosecs 15
      wrt_iorate 2.5 MB/S
      physical_blks_written 1102
      write_errors 0
      physical_blks_read 2
      read_errors 0
      error_rate 0%
      path /etc completed, status 0
    [root@x4440a backup]# obtool lsdev -lvg
    SL500:
         Device type:            library (ACSLS)
         In service:             yes
         Debug mode:             no
         Barcode reader:         yes
         Barcodes required:      yes
         Unload required:        yes
         Ejection type:          auto
         Min writable volumes:   0
         UUID:                   e0b58224-a1a4-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             ACSLS server:       v215f
             ACSLS port:         0
             ACS id:             0
             ACSLS access id:    acsss
         Reservation 1:
             Component:          obacslibd
             Host:               x4440a
             Process:            32195
         Element counts / addresses:
            10 mte: 1 - 10
           281 se : 1 - 281
             1 iee: 1
             1 dte: 1
         Moves:
            From mte, to: mte 0   se 0   iee 0   dte 0
            From  se, to: mte 0   se 0   iee 1   dte 1
            From iee, to: mte 0   se 0   iee 0   dte 0
            From dte, to: mte 0   se 1   iee 0   dte 0
         Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
         State of barcode reader: enabled
    IBM4_0_0_1_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            14 minutes, 58 seconds
         UUID:                   179eb954-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg18
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD4
             Firmware:           C7Q0
             Serial number:      1310127325
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_2_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   7498ff66-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg16
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1168002114
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP6_0_0_3_1:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  3
         Drive:                  1
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   cd20d3fc-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg21
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 6-SCSI
             Firmware:           J39S
             Serial number:      HU1233PPNN
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    IBM5_0_0_1_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  1
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   5b6cf420-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg15
         Connection type:        SCSI
         Inquiry data:
             Vendor:             IBM
             Product:            ULTRIUM-TD5
             Firmware:           D8D4
             Serial number:      1068002447
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    HP4_0_0_2_2:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  2
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   8bd3659a-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg13
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 4-SCSI
             Firmware:           H64S
             Serial number:      HU1803168E
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_3:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  3
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   9ee7dbd4-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg23
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NFE
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    not available
         Maximum block size:     2097152
    HP5_0_0_2_4:
         Device type:            tape (ACSLS)
         In service:             yes
         Library:                SL500
         LSM:                    0
         Panel:                  2
         Drive:                  4
         Automount:              yes
         Error rate:             8
         Query frequency:        131072KB (134217728 bytes) (from driver)
         Debug mode:             no
         Blocking factor:        (default)
         Max blocking factor:    (default)
         Current tape:           [unknown]
         Drive usage:            [not set]
         UUID:                   b45b889e-a1a5-1031-8c0f-002128001bbe
         Attachment 1:
             Host:               x4440a
             Raw device:         /dev/sg24
         Connection type:        SCSI
         Inquiry data:
             Vendor:             HP
             Product:            Ultrium 5-SCSI
             Firmware:           I67S
             Serial number:      HU19477NBF
         Tape state:             offline
         Hardware compression:   on
         Last read was:          uncompressed
         Hardware encryption:    available
         Maximum block size:     2097152
    [root@x4440a backup]#
    [root@x4440a backup]# obtool lsvol -L SL500 -l
    Inventory of library SL500:
         in    1:             barcode F50216, oid 100
         in    2:             barcode I50116, oid 101
         in    3:             barcode LEV008, oid 102, mediainfo hw encryptable
         in    4:             barcode LEV010, oid 103, mediainfo hw encryptable
         in    5:             barcode LEV017, oid 104, mediainfo hw encryptable
         in    6:             volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
         in    7:             barcode LEV049, oid 106
         in    8:             barcode LEV058, oid 107
         in    9:             barcode PQ4196, oid 108
         in    10:            barcode PQ4883, oid 109
         in    11:            barcode S50282, oid 110
         in    12:            barcode S50290, oid 111
         in    13:            barcode S50291, oid 112
         in    14:            barcode S50292, oid 113
         in    15:            barcode S50300, oid 114
         in    16:            barcode S60111, oid 115
         in    17:            barcode S60113, oid 116
         in    18:            barcode SF6410, oid 117
         in    19:            barcode SF6411, oid 118
         in    20:            barcode SF6412, oid 119
         in    21:            barcode SF6413, oid 120
         in    22:            barcode SF6414, oid 121
         in    23:            barcode SF6416, oid 122
         in    24:            barcode SF6417, oid 123
         in    25:            barcode SF6418, oid 124
         in    26:            barcode SF6419, oid 125
         in    27:            vacant
         in    28:            vacant
         in    29:            vacant
         in    30:            vacant
         in    31:            vacant
         in    274:           vacant
         in    275:           vacant
         in    276:           vacant
         in    277:           vacant
         in    278:           vacant
         in    279:           vacant
         in    280:           vacant
         in    281:           vacant
         in    iee:           vacant
         in    dte:           vacant
    [root@x4440a backup]#

    Rich
    Thanks for your response.
    ACSLS is part of the configuration requirements I need to have in this OBS environment.
    I'm going to re install OBS just to see if anything changes.
    Thanks again.
    Update:
    When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
    After the daemon was restarted I was able to use the attached tape drives.

Maybe you are looking for

  • Lvrt.dll error in application

    Hi, I have built an application from my development PC and I am running it on a target PC. The application crashes regulary on the target PC, within 20 min. Windows displays an error measage that states that lvrt.dll caused the failure. I have been s

  • Problem with round corners..the server said it is MBssss of traffic created because of that?

    1) The problem only occurs when the visitor is using Internet Explorer (and possibly only some versions of IE) 2) The problem is that the file pie.js is being loaded many times for these Internet Explorer visitors, causing your traffic to be higher t

  • Sub totals and Totals

    I am developing a query using SQVI. How do I insert subtotals and totals for certain fields at the end of the query report. Thanks Sandeep

  • Safari ram usage always swells and swells

    After upgrading to 2gb of ram I started to keep the activity monitor on and couldnt help notice that safari when fresh is like 30mb or so then as it gets used it swells and swells to 300+mb it never gives ram back? Even if I close tabs or switch to j

  • Retrieve UM Auto Attendant configuration

    in this-link there are many shell commands for editing UM Auto Attendant configuration ,  but there are no commands for retrieve the same information ... is EWS API is the answer?  I'm trying with C# / shell commands to get these information  How I