Network Controller & Intel Chipset Driver not installing

Hello, I have 15 r203tx laptop. I have recently formatted my system and installed all the drivers. But NETWORK CONTROLLER driver and INTEL CHIPSET driver is not installing. INTEL CHIPSET driver is saying "please plug the device : device not found". NETWORK CONTROLLER hardware : "driver not found". WINDOWS 8.1 64-BIT Help me with some solution

Hi . Welcome to the HP Forums! It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More When I looked at the specifications for your notebook, I noted it came with FreeDOS 2.0.HP 15-r203TX Notebook PC Product Specifications I see you have formatted the drive and installed Windows 8.1. You have installed drivers but the Intel chipset drive produced the error saying "saying "please plug the device : device not found", and no driver was located for the network adapter. Where did you acquire your drivers from? As you are unable to access the network from your notebook I suggest you try to download and save the driver files from the official HP page,to USB stick or CD/DVD to be able to install them. Here is link to the HP Notebook - 15-r203tx page, follow the links to display the drivers. To say thanks for replying please click the thumbs up button below. If this resolved your difficulty, please let other people know by choosing solution provided. Good Luck!

Similar Messages

Hp Officejet Pro 8600 on Windows 8.1 driver not installed

Using Windows 8.1 and HP Officejet pro 8600. The printer is installed on a wireless network. But on Device Manager, it says "driver not installed". Most printing tasks are successful, but for some I need to have the driver installed on the computer. I have tried troubleshooting, but am unsuccessful. I would appreciate help. Thanks

Hi emax,
Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
If the issue persists, add a new device if the IP address is valid.
Right-click the Start button () or the lower left corner of the screen, and then click Search.
In the Search box, type HP, and then click the icon for your printer. The printer software opens.
Click Utilities, and then click Printer Setup & Software Selection.
Click Connect a new printer.
Test the printer over the wireless network.
Please provide the following information so I can assist you better.
What is the printer's first 3 sets of numbers for the IPV4 address?
Could you access the printer's EWS?
Were you able to add a new device?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

I am using a ThinkPad T520 laptop. Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
Does anyone know how I can fix it?

Hi Tripplec.
Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error? I am nervous of removing the wrong things and making it worse!
2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them. Is that an alternative fix to 1 above - or an essential follow-on after removing the offending adapters? (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
Much obliged for your assistance.
Fillet

Problems adding USB printer - "Driver not installed" - but it is

Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
How can I start printing again?
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)

First, welcome to the discussions.
For the record, Apple does not normally respond to these Forums.
You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
As of right now it would appear you might be chasing your tail.
When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
These will more often than not download to your desktop.
You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Error "No drive attached to fastrack controller, the bios is not installed"

Having recently purchased a K7N2 Delta mainboard I now get the above error displayed during bootup. Shortly after the message has been displayed the windows boot process hangs.
What have I done wrong or what havn't I done right?
My system spec is:
Athlon 2500xp
80 gig Maxtor HDD
1024 DDR ram (single stick)
XP Professional
N-vidia graphics 440
regards
Technomarv

Hi,
Technomarv:
Listen to what others are saying! "The BIOS not installed" message is NOT a problem My machine says this EVERY time I boot Up! There is obviously something else wrong.
You say:
Quote
The problem does not appear to be with the boot sector as when I put the hard drive into another machine it boots perfectly. Once back in MSI machine the boot process hangs again. I therefore find it difficult just to ignore the PC when it tells me "The bios is not installed".
Am I to understand from this that your trying to boot the same hard drive using two different motherboards? If so - I'm not surprised it doesn't boot! It is advisable to do a full and new install of your OS - to your HD - when installing a new board.
You can't just move a hard drive from one machine to another and hope a boot will be successful (this can only be done when the motherboard and or add-ons are the same or very similar).
Axel

Graphics Driver not installing

Hello,
I have a Dell Optiplex 170L I recently upgraded from XP to WIN7 x32. My display is stuck in 640x480. I downloaded the XP version of the driver, saved it to my C drive, went to the device manager, clicked on "browse my computer for driver
software", pointed to the driver and installed. The installation than proceeded to fail with an error of
"Windows found driver software for your device but encountered an error installing".....Access is denied. I have looked everywhere for a fix to this issue but to no avail. My graphics card is an Intel 82865G Graphics Controller.
All my other drivers (Audio, Chipset, Network, etc...) installed and updated fine. Just my graphics seems to be failing.
Please let me know if anyone has experienced this and has found a fix.
Thank you,
Josh

check at your Video graphic specification, If you have:
Intel Springdale G Integrated Video Is not compatible with Windows 7.
After you download XP driver
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=2HCRJ&osCode=WW1&fileId=2731091730&languageCode=EN
run compatibility mode for XP
Other solution will be buy external graphic card which compatible with Windows 7
Intel 82865G Graphics Controller, try to run these
http://www.intel.com/p/en_US/support/detect
You can also confirm this with Dell as PC manufactured or Intel as graphic card manufactured

Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Envy 14 1260se graphics driver not installing correctly

Recently my computer crashed and I had to reformat my hard drive. I was able to install Windows 7 with the SP1 and I have most of the drivers installed from HPs website. However, I'm having trouble installing my gaphics card (ATI Mobility Radeon HD 5650).
I go to Device Manager and it marks an error for the "Standard VGA Graphics Adapter" the device status is "This device cannot start. (Code 10). I've downloaded the driver from HPs website and I can begin the installing process. However, halfway through I get a BlueScreen, LocaleID: 1033, BCCode: 116.
I've tried almost everything I can think of. I've uninstalled the driver and installed it again. I've downloaded the driver from AMDs website and tried installing it that way and all methods have failed. Always during the installation process I get the BlueScreen and must restore my computer to before I tried installing the driver.
I don't know if this would be the reason, but in my Device Manager and under Display adapters I have "Intel(R) HD Graphics" and the "Standard VGA Graphics Adapter" (which should be the Radeon 5650). So maybe I can't install my Radeon driver because it conflicts with my Intel card. I really don't know. (Before the clean install, my computer could switch between the cards. I don't think I have that ability in my computer right now.)
My computer is fully functional except that I can't use my graphics card. I appreaciate any help or advice out there.

Hello @notarealninja,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is not able to install the graphics drivers correctly, and I would be happy to assist you in this matter!
In order to further diagnose the error message displayed on your computer screen, I recommend following this document on Blue Screen BCCode 116. This should help install any necessary software to prevent the occurrence of another Blue Screen message.
Additionally, if the drivers still do not install correctly, I also suggest installing the original software and hardware drivers that came with your computer. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update these drivers, please follow this document on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Wifi driver not installing

Hello , i tried to install all drivers of wifi for hp 15-ab032tx but it is not installing and working too.I am using windows 8 64 bit dos.how to fix the problem ?

Take a look on the bottom of your notebook for the label with many icons. There should be a description of the wifi as a radio model that gives the brand and model. Yoou can also use the Device Manager and right click the network adapter without driver. Click on properties. Post the hardware ids PCI\VEN character string here in your thread.

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Intel Wireless Display not installing on W530

I noticed recently that Intel Wireless Display (WiDi) was not installed on my W530, despite my recollection of installing it via Lenovo Update. So I tried downloading the latest version both from Lenovo (3.5) and directly from Intel (4.0), but neither will install on my system. During the install, I get a message saying "This platform is not compatible with Intel WiDi or the application is in use. Please see the log for more details." Now, since I have an Intel i7 CPU with HD 4000 integrated graphics and an Intel wireless card (Centrino Ultimate 6300), my system meets the system requirements for WiDi. i have also updated the Intel PROSet wireless software to the most recent version, as recommended by Intel's website.
Kaso suggested on the Notebook Review forums that this could happen if I clean installed Windows instead of booting from the Lenovo-supplied OEM image, since there may be specific registry keys or values that signify the system supports WiDi. As i did clean-install Windows, I'm wondering if anyone knows what those specific registry keys or values might be, so I can add them in.
And if anyone has a different idea why WiDi won't install on my system, I'd appreaciate your input as well. Thank you.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

I have had a number of difficulties with Intel WIDI aswell on my W530. And I will give you a few recommendations.
I recently clean installed my windows and used the Lenovo update tool to install and update all drivers. Then I installed the WIDI app from the lenovo page (3.5 something). Then it works like a charm. My windows reinstall is some coorporate reinstall. So it is not Lenovo generic windows.
You cannot install WIDI for some reason if you have your computer connected to any monitors or in the dock. I think it has something to do with the installer having difficulties with recognizing the Intel HD 4000 when you are at the same time using the NVIDIA GPU.
I have tried a lot of different combinations/versions of WIDI, Intel proset and HD4000 drivers before the reinstall and not all of them work. First I updated all the drivers and it did not work, then I rolled back the drivers and it still did not work. Finally I got it to work after hours of work. But I do not remember what versions I used when it did finally work. After the windows reinstall everything works.
I am using:
Intel WIDI 3.5.40
Intel HD 4000: 9.17.10.2843
Intel Proset: 15.6.1.0
I am very hesitant upgrading any of the drivers/apps because I fear it will cause problems with WIDI.
Let me know if you have any questions. Perhaps I am able to answer those.
I should perhaps mention that WIDI is not exactly the perfect technology. I have a brand new LG TV with WIDI, but I still encounter pixelations and other stuff once in a while, but I think it has something to do with my router (which is in another room) and a lot of WIFI noise in my apartement building with a lot of different WIFI connections.
A moment ago I launched WIDI to look for the version number and this is what I saw. So perhaps I need to update something today. I will look into it when I get home where my TV is.

W540 FaceTime HD Camera (Display) Driver Not Installed

My new W540 (11/10/2014) Lenovo Solution Center under the Check-up tab alerts me that the FaceTime HD Camera (Display) Driver is Not Installed. Such as it is, the camera, a 720P HD, works just fine. A search of resources does not uncover any comment or Driver on this issue. So, since there is no problem as near as I can determine, should I just ignore the lack of Driver issue, and if so, what is the procedure to stop the Solution Center from alerting me to this error? But if on the other hand I should install the Driver, where is that to be found?
MTM 20BG-CTOWW
Other comments not related to the Subject:
I'm using the W540 in the Ultra Dock with video on a second monitor, an Apple monitor, using a Thunderbolt cable. There is no Thunderbolt port in the Dock, so I use the W540 port which surprised me that it works.
FWIW, it is taking me a lot of time learning the location of programs and utilities having moved from my old W510 Win 7(64) setup to the W540 Win(64) 8.1 setup.
W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3
Solved!
Go to Solution.

It is not a problem with the ThinkPad's camera. It is the camera in the Apple monitor that you don't have drivers for.
Being Apple, they might not even make driver for Windows.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

Network Controller & Intel Chipset Driver not installing

Similar Messages

Maybe you are looking for