Network controller is not recognized on Satellite A100 under Windows XP

Hi all!
I have purchased a Satellite A100 PSAAR and I have performed a clean install of Windows XP on it. I have installed all the drivers in the correct order(downloaded them from the support page) but I still have one problem:
In the device manager the ethernet controller and the network controller show up with a yellow exclamation mark and they are not recognized. I downloaded the lan driver and I got it to recognize the ethernet controller. However no matter how hard I tried, I cannot find the suitable driver for the NETWORK CONTROLLER which still shows up in the device manager in yellow color.
I could really use any help here...Thank you in advance.

Please note that Wireless Lan card is placed under the Network adapters too!!!
If you have installed the LAN (Ethernet) driver and the card was installed you should also check if a WLan card driver is needed!!!!
By the way:
If the LAN card was not recognized try this Intel Lan driver:
Intel 8256x Ethernet Controllers
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
Good luck

Similar Messages

  • Outlook 2010 or earlier versions are not recognized in PSE 9 under Windows 7 64 Bit

    Hello, is there any info available "to convince" Photoshop Elements to recognize a installed Outlook 2010 and to work with Outlook 2010 in a WIN 7 64 Bit system?
    In my Photoshop elements 7 and 9 versions it is not possible withinPSE 9 or PSE 7 under  windows 7 64 Bit  to select  Outlook as a valid parameter under the otion settings within Elements to handle emails functions within PSE properly.....

    Yep. I agree with the above comments. Other users have reported issues while working with outlook 64 bit. Here is one such discussion http://forums.adobe.com/message/3289324 .
    Thanks

  • SB (model 0220) Live 5.1 NOT RECOGNIZED by the computer (under Windows

    What do I need to do? Thanks.

    Guys: I'm new to this forum and to Creative SBO220 sound cards. I just bought an OEM card and installed it on 6/22. I had trouble with no sound until I realized that I had to go to Control Panel>Sounds and change my defaults. After that, the sound was there. Check it out.
    If you need any more help, post back.

  • Satellite C660d-14G: network controller is not installed

    Hi.
    I installed windows 7 on my toshiba,
    I have problem with the wireless driver.
    I downloaded all availible drivers on the site, but there is no change.
    In the device manager write that the network controller is not installed.

    Hi
    > network controller is not installed.
    Network controller could be Lan card or Wlan card.
    Are you sure that you need to install the Wlan driver?
    As far as I know the notebook has been equipped with the Atheros AR9285 802.11bgn Wlan card.
    The LAN card is 10/100 Base-TX Realtek 8105E-GR
    By the way: The latest Wlan drivers can be downloaded here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads

  • The realtek Network Controller was not found. WIN10

    Hi, Need a little bit of help. Laptop is SATELLITE P50-B. Wifi - not detecting any network. Wired - still no networkchecked device manager, network driver is present no bang, not disabled. tried to uninstall it and restart the laptop and still same thing. tried to uninstall it and download the driver from the support website and still same thing. so i tried again to reinstall the driver and this time got a message "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable" First time to encounter that message.

    Hi CB, did you mean PSPNsU or PSPNU only? mine is PSPNsU. And yes i did go to the settings already to make sure that its on. Interesting part is I tried my ethernet cable already and still it doesn't detect the connection.

  • Satellite A100 PSAA5A Windows doesn't recognise ethernet controller

    Hi,
    I'm having an issue with an A100 PSAA5A-01H00T running Win XP sp2.
    Windows doesn't recognise an ethernet controller, hence the wireless NIC is not working, although the wired connection is.
    I've tried installing the latest WLAN drivers from the support site (both of them), to no avail. Windows is insisting the appropriate drivers are not installed.
    I suspect a hardware problem, and have the user on an external wireless NIC, but I'd appreciate any insight you guys can provide.
    Thanks.

    Hi mate
    What Ethernet controller is not recognized? WLan or LAN?
    Do you have some unknown devices in the device manager?
    If yes, then a essential driver is missing and therefore the controller is not recognize properly.
    You dont know what Wlan or LAN chip you have and what driver is necessary?
    Check this:
    How to identify an unknown device (e.g. Wireless LAN module)?
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ethernet driver for WXP is not working on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
    In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

    Hi
    I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
    However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
    If you want you can download and install the Lan driver from the Intel page:
    http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
    There you will find the drivers for the Intel 8256x Ethernet Controllers
    Bye

  • Virtual Sound does not support my Satellite A100-998 with Vista

    Hi.
    I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
    Ps. Sorry for my bad English, but please help me!

    Hi,
    had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
    Which operating system is on your machine installed?
    Greets

  • Nokia PC Suite does not work on Satellite A100-234

    I have installed Nokia PC Suite in my notebook (Satellite A100-234) unfortunatelly its not working. The same cable and Mobile is getting connected with other PCs.
    Kindly send your valuable suggestions.

    Hi
    Could you please be more specifically???
    Did you get any error messages or something else???
    Maybe something goes wrong during the installation procedure
    Therefore I would recommend removing this Nokia program and try to install it again.
    Additionally I would recommend checking the PC Suite FAQ on the website

  • LAN controller (2106) not recognizing 1131AG Ap

    I am configuring my LAN controller and its not recognizing my 1131AG AP

    Errrr ... can you provide more info please?
    Firmware?
    Error logs?
    NTP configured?
    Power injector or PoE?

  • Network Controller Driver not found, hp proBook 4530s, Windows 7

    I am using a notebook (proBook 4530s), with Windows 7, 64-bit,  and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

    You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Satellite A100-795 - Windows Xp drivers

    Hello,
    I have a little problem with my Toshiba Satellite A100-795
    I can't make my wireless nor my network adapter to work...
    I've downloaded all the drivers from the drivers website, but they are not working..
    Here is a print screen of the device manager: http://getstring.info/public/dvcmngr.jpg
    Any ideas?

    got it working:
    If anyone else needs the drivers for both Ethernet Lan and Wireless devices here are the links:
    Ethernet Lan:
    http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/4275/a08/pro2kxp_v13_1_2.exe&agr=N&ProductID=&DwnldId=4275& strOSs=&OSFullName=&lang=zho
    wireless:
    http://support1.toshiba-tro.de/tools/updates/atheros-wlan/atheros-wlan-xp-7601300.zip
    this are the drivers for Windows XP
    Toshiba Satellite A100 795 PSAANE02D00KDU

  • My Ipod 2g is not recognized by my PC running Windows 8

    I submit the diagnostics of itunes aswell.
    Please help!!
    Microsoft Windows 8 x64 Business Edition (Build 9200)
    INTEL_ BGP6710J
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00EABC78060B9DA0
    Current user is not an administrator.
    The current local date and time is 2013-06-16 20:11:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.

    See:
    iOS: Device not recognized in iTunes for Windows
    Try another USB port and cable
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Applies to W 8 to
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Yoga 2 Pro touchpad not recognized as precision touchpad on Windows 10

    Hi all, I was really delighted to see Synaptics drivers being available for the Yoga 2 Pro for Windows 10 on your site yesterday. However, I am really confused to see that the Yoga 2 Pro touchpad is not recognized as a precision touchpad. Does the hardware not allow it or is it Synaptic's fault or what else? I'd really love to have these settings: http://twitter.com/Daniel_Rubino/statuses/617023404911239168The Synaptics driver you provide doesn't allow me to change what happens when I tap with 3 fingers (btw, Cortana isn't activated by your driver anyway - it simply doesn't work) and I'd like to select by myself what should happen when I swipe with 3 fingers. Why do you stick to the Synaptics driver settings, if it's integrated into Windows 10? Thanks for any help and best regardsSebastian

    Also, 3 finger tap doesn't trigger Cortana over here... Please integrate the touchpad into Win 10 settings and let Windows handle all the stuff.

Maybe you are looking for

  • Error in operation level result recording

    Hi, I need held; result recording of inspection type =03 (operation level Quality inspection) A product manufacture via three operations (10, 20, 30) All operation quality inspection active let operation no-10, all products reject and confirm as rewo

  • Need WLST for Weblogic portal domain 9.2.2.

    Hi, I am very much in-need of it. Can you please provide me the Need WLST for Weblogic portal domain 9.2.2. Actually, we are using weblogic 9.2.2 version. Actually, I created a portal domain configiuration using configuration wizard and the same I do

  • Preparing Jpegs for Sony LCD 46" TV

    Hello All, I was just wondering when I create a digital slide show of my photos and create a .mov file and then use this file in iDVD....do you have to be concerned with the pixel dimmensions depending on the tv you are going to watch it on? The TV t

  • Canon Pixma MX870 SD card help

    I had a Epson NX Stylus printer and i could transfer files to the instered SD card in the slot. That printer broke and got a Canon Pixma MX870, and now everytime i drag a file to the SD card, it requires a Admin password. Can someone please help to r

  • Version 7 features

    i am currently running version 7.0.1.8 can anyone tell me what extra features i will gain buy updating to version 7.0.2.0 ?? do i really need to download a 35mb file to make this incremental upgrade?   Windows XP