Network controller not found

sir i am unable to find the driver for network controller even from internet. please tell me what can i do ?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-ac042tu Notebook and issues with looking for a driver. Here is a link to your Driver page for your Product. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. It also has a built in Wireless Assistant that should help.Please let me know how this goes. Thanks.

Similar Messages

  • A desktop is failing to join in Domain over a VSAT link. Error: Network path not found.

    Dear Friends,
          Facing an issue for adding a desktop in Domain over VSAT. When I say enter after typing the domain name which i want to join. I am asked for User name and Password. After User name and password is entered it waits for a long
    time and then it gives an error as Network Path not Found. I am pretty surprised why is it happening like that.
    In hosts file too I am mentioning the IP of the DC at my Data Center.
    I have another site over VSAT which has worst latency and more RTO's than this one, but on that site I am able to add a desktop in Domain. I don't have domain controller at the remote site which is connected by VSAT.

    Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
    Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
    You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
    http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
    https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
    Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
    ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Error message stating "Network resources not found"

    I distributed a form and now I am receiving a message stating "Network Resources Not Found". What can I do? Nothing has been changed since the form was distributed and the "help person" was no help when talking to them.

    The forms are saved on my personal computer and they have not been moved since they were created. The form was given an open access so that anyone could access and complete/submit the form. It had been working perfectly until Tuesday when the error message started to appear.

  • SCCM Install fails. cannot connect to SQL server. "the network was not found"

    Hi,
    I'm installing SCCM 2012. i have a 2 server boxes. 1x sccm and 1x dedicated SQL. sccm installation is stuck @ connecting to DB.
    SQL server is 2012 with SP2, static 1433 port used.installation account used is already sysadmin, sccm computer account also added into SQL local admins. ports 1433, 4022, 445 are already FW open in between SCCM box and SQL Box?
    error pop up" "the network was not found"
    Pls advise.

    if MS is really doing good job then such things (scCm on remote sql) should be easy for us with proper docs. Cheers!
    The docs are "proper". They give you all the technical details needed. They assume however that you know how to translate the stated requirements, like the ports necessary (as documented at
    http://technet.microsoft.com/en-us/library/hh427328.aspx ), into the environment you are working in. They cannot give you a click by click guide because that would only be applicable to
    generic lab environments.
    Sorry that that may sound a bit harsh, but it is reality. They simply have no idea what customer networking environments actually look like as the possibilities are simply unbounded. They must rely on the implementer being able to take the core technical
    requirements and implement them for the uniqueness of the environment they are working in. In most cases, this is generally straight-forward, but there is a great deal of variety in the real-world.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Forms: network resources not found

    I created forms using Adobe 9 standard, and distributed them to over 100 people.  Everything was  working great until Nov24, not it says "network resourses not found"  i called adobe directly, and was told on Monday that there is  an issue with Acrobat.com due to upgrades, should be fixed by Wedn.  the issues is still a problem.  I have called several 800 numbers for adobe trying to get to the correct department and have been hung up on 8 times!  i am getting completely frustrated!  Is there an issue with Acrobat.com?  is it fixed?  what number can i call to get someone who can actually help me??

    Hello,
    I'm so sorry for the inconvenience. The solution to the problem has been posted in a forum thead here:
    http://forums.adobe.com/message/2433124#2433124
    Michelle

  • Lenovo 3000 G230 Network Controller Not Recognize

    I`ve Lenovo 3000 G230 with OS Windows XP SP3 but in Device Manager Network Controller not recognize. I have installed all driver from http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=44 but still not working for Wireless LAN.
    Need your help plz.

    Hi,
    I also need to know an answer to this. I keep trying to get the Wireless driver to work but it does not. I have downloaded it three times and tried different versions of XP SP3.
    Any ideas?

  • Network card not found after new installation [SOLVED]

    I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
    dhcpcd: eth0: interface not found or invalid
    although network connectivity (wired and wireless) worked perfectly before the installation attempt.
    This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
    I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
    I should say, the device is there and working:
    lspci | grep Net
    gives
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    I also did
    modprobe ath9k
    just to make sure. No luck.
    Any help will be appreciated.
    thanks
    thea
    Last edited by thea (2012-07-23 23:59:16)

    Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
    But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
    and it does not sound encouraging for the kernel you have there.
    The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
    If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
    Beware that the ones from July dont have the AIF setup anymore.

  • HP Pavilion dv6-3043ee Realtek Network Adapter not found in Device Manager

    Hi I own an HP Pavilion dv6-3043ee, 64bit and running Windows 7. And somehow the network adapter for the LAN got uninstalled for some reason. Now after posting something on the site I finally downloaded the driver for my laptop.
    Now another problem, after or at the end of the installation process a pop up message was shown:
    "The Realtek Network Controller was not found,
    If Deep Sleep Mode is enabled Please Plug the Cable."
    Now I checked Device Manager to see if the Realtek Network Adapter was there but it wasn't. All I can see are:
    -Atheros AR9285 802.11b/g/n Wifi Adapter
    -Bluetooth Device (Personal Area Network)
    -Bluetooth Device (RFCOMM Protocl TDI)
    -TAP-Windows Adapter V9
    Someone please help. Thank you.

    If device is identified but there is no driver for it, it will be appeared as unknown device in Device Manager with question mark icon (?), are you seeing such thing in device manager?
    If not, you should refer to your PC manufacturer's website and download.
    Make sure report this issue using Feedback App.

  • MSI GAMING 970: Network drivers not found

    Good day,
    I have encountered an issue, made more confusing as i was playing a MMO when it occurred. MSI GAMING 970
    Network drivers are missing:
    "Windows did not detect a properly installed network adapter. If you have a network adapter, you will need to re-install the driver"
    so I try to reinstall them. then I get the error message :
    "The realtek network controller was not found. If Deep Sleep Mode is enabled Please Plug The Cable"
    The case has not been opened, the computer was on and running a game at the time of the fault.
    Anyone got any ideas?
    Thanks in advance for your help.
    AJS

    Quote from: tyrsfang on 14-January-15, 20:26:54
    I did give all relevant information as the issue is with the integrated network interface.
    Device manager shows nothing, drivers won't re-install because it can't see the device. Drivers are from CD. I can get (very) limited access to the internet with a wireless card but it's intermittently at best.
    Read the post.
    What CPU? What power supply? What memory?
    Without proper information we are going to spend many posts trying to figure out what the problem is. Instead of arguing it, just provide the information from the >>Posting Guide<< and we can more easily and better diagnose the problem.

  • System Image Recovery from Network Drive - not found

    Hello all!
    I have been routinely backuping my OS and important files using Windows 7 backup on a NAS. It just so happened that I needed to re-image my OS drive and I got into the Windows 8 recovery boot sequence.
    I booted from a windows 8 USB stick and Under the Advanced tools I selected the System Image Recovery and tried to look for the system image on the network path. Although the prompt said it was connecting to the network , the network share was
    not found. the command prompt couldn't ping google.com and netsh wlan <SSID> command did not work in hopes of connecting to my local wifi.
    Is there a way to connect to the wifi network where my NAS is connected to in order to re-image from the system image found on the NAS? Luckily , there was an older image on a separate local HDD that I could re-image from but I would prefer if
    I could connect to the NAS during the recovery process.
    Any help is greatly appreciated.

    Hi,
    First, I have to say that in WinRE, http and wifi is not supported, that's why you cannot ping google and connect to wifi.
    To access NAS, we have to make sure that your network connection is wired, and try to manually location the NAS via
    \\IP address\...
    I will check if the Windows 7 image backup can be restored in WinRE of Windows 8, and update your soon.
    Edit:
    I have tried this, and it appeared that to restore Windows 7 image backup on this computer from Windows 8 winRE is not supported.
    see following error:
    Kate Li
    TechNet Community Support

  • "Host Controller Not Found"

    I recently factory reinstalled my Lenovo W510. The recovery discs come with Vista 32 and I upgraded the system to 
    Win7 64. The device manager did a good job at finding the missing drivers I needed except for two things...
    The most concerning problem is that the pc will not  recognize any usb device that is plugged into it. The logical 
    thing to do is download the required usb drivers to make them work. I have downloaded the usb 3.0 device
    driver as well as the firmware for this. Whenever I try to run the "USB 3.0 Host Controller Utility" , the system tells
    me that there is no host controller found. When I try to install the firmware it says "Not Found the Host Controller"
    I don't know what else I need to do? The device manager update utility does not recognize any missing drivers.
    Any help?
    THANKs!!!!

    hey atweiss90,
    if you uninstalled the current USB 3.0 drivers. Does your OS install generic drivers for it ?
    If it does, could you see if your USB works with the generic drivers.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Network path not found ldap applications

    Hi,
    "The network path was not found" error message when ever start a LDAP-related application in Windows Server 2012 R2.
    unable to open the all of the below LDAP applications
    Active Directory Users and Computers MMC snap-in
    Active Directory Domain and Trusts MMC snap-in
    Active Directory Sites and Services MMC snap-in
    ADSI Edit MMC snap-in
    Group Policy Management MMC snap-in
    DHCP MMC snap-in
    Ldp.exe
    Any help..greatly appreciated.
    MD

    If server manager posts lot of LDAP errors that mean the component may not have installed succesfully or if you see a yellow exclamation in server manager the configuration may not be complete. To complete the configuration click on the yellow exclamation
    to proceed.
    If the configuration is complete then as it's a new setup, can you try to remove the AD Domain Services Role -> Reboot -> Add the role service -> Configure the role service -> Reboot and then try
    Reg,
    Darshan
    Darshan

  • Lenovo g570 network adaptor not found (for wifi and blue tooth)

     my lenovo g570 laptop does not found network adaptor for wifi and blue tooth it did not recognize the hardware part may be. because i install software for that so may time. few days back i used wifi as well as bluetooth in my lapi but for last two or three month i just used lan for internet connection and in between i chanded my os wihich is win 7 ultimate to win 7 proff. i dont know what is the reason for that.
    please troubleshoot this so that my lapi can detact network adaptors for wifi and blue thooth.
    vivek
    Solved!
    Go to Solution.

    hi VIVKGP,
    Thanks for Posting!
    Please check under Control Panel and uninstall Lenovo energy Management and uninstall it,
     Now Download and install this, now Download and Install this.
    Lenovo Energy Management -WIndows 7
    caez29ww.exe
    13.6MB
    Restart after Installation
    After Installation:
    Press Fn+F5 and make sure Wifi and bluetooth are on "ON" status.
    You can also Try installing Drivers for both.
    Broadcom Bluetooth Driver
    IN3BTH50WW5.exe
    58.8 MB
    Intel Wireless WiFi Link Driver
    IN1WLN101WW5.exe
    138 MB
    and check the status again.
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Network Controller not showing in Device Manager

    I have this wifi card in my pc: 802.11 wireless b/g/n PCI-Express x1 card Figure 3: Wireless card - side viewInterface type: PCIData transfer speeds: up to 300 MbpsTransmission standards: 802.11 b/g/nSupported antenna connections: Either 2 internal antennas or 1 external antennaOperating band: 2.4 GHz to 2.5 GHzSupported security protocols:WPAWEPAn antenna is attached with this card with help of 2 wires coneccted through screws at back of cpu. My problem is that earlier when I bought pc in 2010, it used to show wifi connections around in internet icon in taskbar but after few days it stopped showing wifi connections means it stopped catching wifi connections. When I surfed net for this problem, I came to know that Network Controller driver should be installed in my system for wifi card to work but when i ipen device manager, no NETWORK CONTROLLER or OTHER DEVICES tab is found(screenshot below.   So do i have to install some drivers or is there any other solution?? ..............., please help !!!!

    Is there anybody who can solve my problem ? please....

  • XPOWER USB 3.0 HOST controller not found

    i tried to reinstall the usb 3.0 driver/app from msi and when i run it from the start menu i have this error below
    i also tried asus driver and does the same thing.. i need help.. and i am thinking that the conflict on my device manager is the controller
    Machine  Spec :
    Bigbang Xpower (1.40) bios
    intel xeon x5650
    Kingston hyper X 2250mhz
    Msi GTX 295 single PCB
    please help..

    here is my story..
    my old rig was xpower + gtx580 + same memory + xeon 5650 and works like a charm. i rma'ed my mobo last month and have the chance to assemble it yesterday, i sold my gtx580 and downgraded my card to gx295 and that is the only thing i changed.
    right now, i do not know if the new rma'ed mobo has a problem or this gtx295 causing it. currently, here are the points to consider
    -GTX 295 with a single memory it works
    -GTX 295 with 2 or more memory i encounter a vga conflict
    -GTS 460 works fine with a single dual and triple channel memory

Maybe you are looking for