Network crashes after several minutes
Hi folks,
I was using LFS for some time and now switched back to arch because of the anoying updates.
I was using the exact same hardware about one to two years before with Arch and there wasn't any problem, so I guess the bug is in the software (or the end user ).
I'm using the ndiswrapper + dhcpcd / dhclient (problem is the same on both), all from the arch repo.
After a few minutes being online (this problem occurs more quick if I do several online tasks at once, like torrent + jabber + surfing, or even loading several webpages at once) my network crashes completely.
With crashing I mean: I can't even kill dhcpd nor unload the ndiswrapper module, if I try the process is loading about a few minutes and then completely freezes (I can't kill the kill proccess, funny somehow). I also checked every log but I just can't find anything in them (nor can I find a special dhcpd / dhclient / ndiswrapper / networks in general log).
I hope one of you guys can help me because I don't want to switch back to LFS.
I tried different solutions till compiling both: an older kernel and an older ndiswrapper version, but none of them made any difference.
I guess I'll have to switch back to LFS for now which isn't a huge problem.
I just hate to remember and update all packages myself .
But thanks anyway, I'll switch back to arch in a few month and try it again.
Similar Messages
-
Hello. For the past 2 days my imac (running 10.7.5) is consitently crashing with a panic attack after roughly 15 minutes of booting up. I have done Disk Utility several times, i have even used time machine and back up to a day prior to the problem beginning. I can boot in safe mode with no problems yet when i go back to normal boot i crash after 15 minutes. i need help further diagnosing the problem.
The only new things i have done recently is:
1. Begun using Time Machine 3 days prior to the problem.
2. updated itunes and received an error for an extension at the end of the install.
Here is my most recent Panic attach log:
Interval Since Last Panic Report: -19067361 sec
Panics Since Last Report: -26
Anonymous UUID: 4C748644-977F-44D9-913D-03DAD05E598D
Wed Sep 17 16:15:24 2014
panic(cpu 6 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f807d5582, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81a2664c08, CR3: 0x000000004d628000, CR4: 0x0000000000000660
RAX: 0x00000000009b0141, RBX: 0xffffff81d01c30e8, RCX: 0xffffff819ffa4704, RDX: 0xffffff819ffa0038
RSP: 0xffffff81d01c3030, RBP: 0xffffff81d01c3040, RSI: 0x0000000000000002, RDI: 0xffffff81d01c3098
R8: 0xffffff819ffa77f8, R9: 0xffffff80063424b0, R10: 0x0000000000000025, R11: 0x0000000000000025
R12: 0x00000000000003c0, R13: 0xffffff80225fe06c, R14: 0xffffff819ffa0048, R15: 0xffffff819ffa0040
RFL: 0x0000000000010282, RIP: 0xffffff7f807d5582, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81a2664c08, Error code: 0x0000000000000000, Faulting CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff81d01c2ce0 : 0xffffff8000220792
0xffffff81d01c2d60 : 0xffffff80002c4794
0xffffff81d01c2f10 : 0xffffff80002da55d
0xffffff81d01c2f30 : 0xffffff7f807d5582
0xffffff81d01c3040 : 0xffffff7f807d52d1
0xffffff81d01c3150 : 0xffffff7f807e146e
0xffffff81d01c31a0 : 0xffffff7f807e0778
0xffffff81d01c3380 : 0xffffff7f807dce5d
0xffffff81d01c3510 : 0xffffff800067e6d5
0xffffff81d01c3550 : 0xffffff80002e5a14
0xffffff81d01c3d80 : 0xffffff80002e6626
0xffffff81d01c3f50 : 0xffffff80005ce4cb
0xffffff81d01c3fb0 : 0xffffff80002daea3
Kernel Extensions in backtrace:
com.apple.kext.AppleMatch(1.0d1)[20CB0090-08DA-372A-BDA3-DB04476B3BB7]@0xffffff 7f807d4000->0xffffff7f807d7fff
com.apple.security.sandbox(177.8)[1D690978-CBB7-304F-9DAD-684F40BE16A8]@0xfffff f7f807d8000->0xffffff7f807e8fff
dependency: com.apple.kext.AppleMatch(1.0.0d1)[20CB0090-08DA-372A-BDA3-DB04476B3BB7]@0xffff ff7f807d4000
BSD process name corresponding to current thread: mds
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 497036605488
last loaded kext at 286894751171: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f80795000, size 57344)
last unloaded kext at 352955637632: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f80795000, size 49152)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.kext.ATIFramebuffer 7.3.2
com.apple.ATIRadeonX2000 7.3.2
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleIRController 312
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.kext.ATI4800Controller 7.3.2
com.apple.kext.ATISupport 7.3.2
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 16 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D33583447534431303636202020202020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D33583447534431303636202020202020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D33583447534431303636202020202020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D33583447534431303636202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 0 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-41Y6A0, 1 TB
Serial ATA Device: HL-DT-ST DVDRW GA11N, 4.18 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa140000 / 5
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0xfa142000 / 9
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0xfa142300 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3That kind of panic is usually caused by a memory fault. Remove half the memory modules and test. Then switch and test the other half.
-
Overrun error (-10738072​52) occurs after several minutes
Hello folks,
I have a LV 7.0 program that terminates after several minutes of running with some VISA serial port communication with an error -1073807252, overrun error. I only get this error on Win98 and the latest version of LV (7.0) and VISA (3.01). Does anyone know what exactly causes this error? The help on the error is not very detailed. I tried the same program on a Win2000 PC and it works without any problems. I also tried another VISA communication program on the Win98 PC and the same error occurs.
Thanks in advance,
MichaelDave,
not really a solution, but a suggestion.
Windows is by far not a real-time OS. And there are several buffers
involved when doing serial communication.. The first one when watching
from the serial cable side is the UART. This one is the one that is
affected by serial handshake. A system driver acts as the interrupt
service routine ISR whenever this buffer is nearly filled or emtied and
performs some coying to or from a system buffer. LabVIEW as user mode
program uses this buffer for ist serial reading and writing. This
system buffer is often not taken into account. Its default size is
often not as much as one would expect and some few kB of data may
easily overrun it. I have learned this when performing serial highspeed
transfer with up to 13 ports simultanously.
You can use 'VISA Set I/O Buffer Size' to set this buffer after you
have configured a serial port. AFAIK one can set the buffer size of
both directions to a value of up to 32765 bytes. Yes, not 2^15, but
2^15 - 3. But do not rely on the exact number, please. Test it on
your system.
How can this buffer overrun?
Well, WinDoze can (occasionally) take some time where nothing happens
with end user code. This may happen when awakening the hd from power
save mode or when doing some network actions. And there are a lot of
other possibel reasons. This does not affect the system driver, which
fills up the system buffer when serial transfer is in progress.
Your code may as well operate in 'bubbles' that do not allow to empty
the buffer in-time. Think of DLL code or subroutine prioritized one.
All this may be eased if not solved by setting the system buffer size
to the limit, as it increases the delay your whole system can ignore.
Just my Euro 0.02
Greetings from Germany!<br>-- <br>Uwe -
Wifi connection very slow and interrupted after several minutes
My wifi connection is interrupted after several minutes. I can restart the connection with wifi assisted, diagnose tool. It indicates always ISP failure. When I go through the assistant, it sows that the network connection was changed, and the wifi connection is back. But only for some minutes, then I have to go the the assistant again, and again and again. Also the wifi protocoll tool did not help me.
Meantime I don't have any problems with my IPad or Iphone.
In the web I found plenty of other users with MacBook Pro (Retina) OS X Yosemite, Version 10.10.2 with similar problems. When will apple fix this bug?
Do somebody has in idea how to fix it?
Thanks for your support!
BirdYou posted in the support forum for the Apple routers......AirPort Express, Airport Extreme and Time Capsule.....the products pictured below:
But, your post seems to describe a connection issue that you are experiencing with your MacBook Pro. We are not sure how an Apple router might be involved here if your other devices are connecting well.
You will likely receive a much faster and more informed response if you post your question in the support area for the MacBook Pro linked just below:
MacBook Pro -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?
Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)
-
i have windows 7 and after the upgrade to itunes 11 misic, videos, tv programmes keep crashing after 15 minutes???
help would be very much appreciatedThe problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 4.1.and/or Safari 5.
In your case these are:
0x1158d0000 - 0x1158d2fff +com.MTWB.SafariAddon.osax ??? (1.0) <07F89448-3C9B-4893-46B5-D46138999B9F> /Users/petecathiivr/Library/ScriptingAdditions/MTWB.osax/Contents/MacOS/MTWB 0x1158d6000 - 0x1158dbfff +com.MakeWebBetter.FastBrowserSearch ??? (1.0) <2F66120A-A252-0AC5-DD33-C59C78CAC902> /Users/petecathiivr/Library/MTWB/Plugins/FastBrowserSearchPlugin.bundle/Content s/MacOS/FastBrowserSearchPlugin
You fill find them in one or either of these folders:
Home/Library/Input Managers
Hard Disk/library/Input Managers
Hard Disk/Library/Application Support
although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
Close Safari and delete them, then restart Safari and it should be working normally. Alternatively drag them to the desktop and restart Safari. then add them back one at a time, restarting Safari every time, until you find the one (or more) causing the crash.
Check with the developers of the plug-ins in question for updates that are Safari 5 compliant. -
When downloading a movie on my IPad an error message occurs after recording for several minutes that says "Downloading error - please tap to retry". The IPand also kicks out of Facebook after several minutes back to the screen meun. Any advice on how to correct this? Thank you.
Hi MartinVernon,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.
Hey Ian
That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Thank you for using the Apple Support Community.
-Norm G. -
After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help
Hello EvanClayton,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action. -
i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!
so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.
-
Tecra 9100 freezes after several minutes
My Tecra9100 (P4, 1,8 Ghz) freezes after several minutes. It shows no reaction on keyboard or mouse input.
It doesn't matter whether I'm running WinXP, Linux or just enter the BIOS.
Rebooting the system leads to a shorter period until freezing (several seconds).
First I thought of overheating of the cpu but a small hardware tool shows me that the temperature is normal and the cooling fan works.
Any idea? Perhaps a problem with the VGA?Hi
Yes, its perhaps something wrong with VGA but I think it could be a memory fault.
Try to replace the modules and check if there are some performance improvements.
If not, the technician should check the notebooks motherboard
You know; Its always not easy to say what could be wrong without any diagnostic procedures -
iMac - 27 ", late 2012
Processor 3.4 GHz Intel Core i7
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.9.4 (13E28)
After I updated from CS6 to CC 2014, my screen started to display blue lines and/or a blue imprint of a previously closed window, and Premiere CC 2014 and AE CC 2014 began crashing after about five minutes of use. Also, an error message popped up telling me to update my CUDA driver. I took the iMac into Apple and after updating the CUDA driver in store with an Apple associate, the error message went away. They were concerned about the blue lines, and after 3 days of hardware testing, they determined that the screen was not failing, the hardware was in great shape and the lines and crashing must be a software related issue. I took the computer home, uninstalled and reinstalled AE using the appropriate installer, and rebooted. Then I uninstalled and reinstalled Premiere using the Premiere installer and rebooted again. During the second restart a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen. I typed in my password, opened up the Premiere project I'd been working on and immediately, the always dramatic message "A serious issue as occurred..." popped up. I tried opening it again, saved a new recovery copy and started to work on the project. Five minute later it froze up and I had to force quit. This happened two more times, both roughly after five minutes of use....back to square one.
Obviously, this is seriously hurting my workflow. Any advice you could give would be greatly appreciated!... a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen.
The apple guys said this wasn't a hardware error? I don't know software errors to save imprints throughout a restart. If I were to live dangerously and assume anything it would be that you got a failing graphics processor.
Ever tried cloning your boot drive and then doing a complete wipe and re-install of OS and CC? -
Edge Animate CC 2014.1 keeps crashing after 10 minutes of working
Edge Animate CC 2014.1 keeps crashing after about 10 minutes of working. I have to be very careful when importing layers, or anything I do, pretty much. It's like walking on thin ice every time I work on it. I'm working on something with a deadline and it is hindering my progress greatly.
Any help greatly appreciated.
Thank you,
Lunaaibun So... it just happened again. This time, I was just moving an image position. Apparently the heavy black shadow around the alert box means Edge Animate keeps generating alert boxes infinitely (screenshot below).
It's really strange. My MacBook is brand new so I couldn't think of any internal causes.
Thanks in advance,
Luna -
ITunes crashes after one minute, exactly.
I've logged in with shift pressed, I've disabled funky system preferences modules, yet it hasn't helped. After launching iTunes, it crashes after *exactly* 60 seconds. Every single time.
In the console, I see this after *every* crash:
2014-05-25 09:18:41,428 com.apple.launchd.peruser.503[278]: (com.apple.iTunes.45616[1846]) Job appears to have crashed: Segmentation fault: 11
2014-05-25 09:18:41,697 ReportCrash[1866]: Saved crash report for iTunes[1846] version 11.2.1 (11.2.1) to /Users/sandman/Library/Logs/DiagnosticReports/iTunes_2014-05-25-091841_Imaginat ion.crash
2014-05-25 09:18:42,275 system_profiler[1870]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:42,573 system_profiler[1872]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,549 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,558 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,559 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,568 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,576 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,587 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
2014-05-25 09:18:50,597 system_profiler[1880]: FIXME: IOUnserialize has detected a string that is not valid UTF-8, "�� 2".
Sometimes with a different amount of UTF8-errors.
So, my thinking is bad iTunes database? Is there some strangly named song perhaps? But the rub is that it's always occuring exactly one minute after I've launched iTunes. How could that even be? It only occurs on my iTunes, when I log in as another user, no such problem.Any audio enhancement software on that Mac (e.g. Boom or Hear)? Or custom visualizers for iTunes?
Maybe you are looking for
-
Forms 10g Function Key Buttons
Hello, I want to create graphical Function key Buttons (F1-F8)(Mouse clickable) to the bottom of all my forms (~650!), like in a terminal. Buttons are the same for all forms. Anybody know how to do this? I already managed to assign the proper functio
-
Session not shared between multiple wars, with no cookies
I posted an earlier query on multiple wars in the same application. Actually session is maintained and getting shared on the server when browser supports cookies. When Browser does not support cookies i have the following problem, a) Without cookies
-
Convert video filmstrip to a picture
How do you covert a video to a picture with an iphone 4?
-
HELP - Plug in crashes and shuts down browser
I get a problem which results in the browser which is running the plug in (and the plugin itself) close down suddenly. No error. No warning, they just vanish. I am using IE5 and JRE1.3 for the plug in. The code when it occurs is KeyPairGenerator keyg
-
Which user exit MV45AFZZ or MV45AFZ1 or MV45AFZB to use.
Hi All, In the Sales Order Types ZDRC and ZCRU, when Sales Org is US15, the field VBAP-MVGR1 shall be mandatory. We need to use MV45AFZZ or MV45AFZ1 or MV45AFZB user exit. In MV45AFZB, USEREXIT_CHECK_VBAP, seems closest, which is used to