Network devices discovered but not managed

SCOM 2012 R2 management group. A dedicated network monitoring resource pool consists of two MSs. These two MSs have been removed from AMSRP and other two default resource pools (AD.., Notification...) - is this correct?
Two discovery roles:
role1 runs on GWS1 discovered (explicitly) 5 devices and shown all "healthy". This rule was using AMSRP to monitor, but changed to the dedicated pool after it was created.
role2 (added after the dedicated resource pool was created) runs on GWS2 discovered (explicitly) 2 devices but shown as "not monitored"
How to find out what's wrong? (log files etc?)
Anything need to check with the resource pool settings?
Thanks.

Hi,
Do you mean that you have discovered the two network devices on your Management server, but it is not monitored.
This issue maybe caused by the proper management pack was imported, please go through the below article to get more information about how to monitor network device by using SCOM:
http://technet.microsoft.com/en-us/library/hh212935.aspx
Network Monitoring using System Center Operations Manager 2012
http://blogs.technet.com/b/rohitkochher/archive/2011/11/26/network-monitoring-using-system-center-operations-manager-2012.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • Discovering Network Devices with SNMP not working

    I have implemented SCOM 2012 SP1 CU5 on Server 2008 R2 with SQL 2008 R2 all installed on the same VM running side by side with SCOM 2007 R2 v 6.1.7221.0. I have almost fully decommissioned SCOM 2007 and all that remains on it is 2 network devices that
    I cannot discover with SCOM 2012 using SNMP, no matter what I try. If I just use ICMP the discovery works. I have checked both the devices and SNMP is enabled and if I run this snmpwalk command on both devices I get a response;
    c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.XX -v:1 -c:"public" -os:.1.3.6.1.
    2.1.1 -op:.1.3.6.1.2.1.2
    SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
    [ More useful network tools on http://www.snmpsoft.com ]
    OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=NetMan 100 plus
    OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.5491.6
    OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=5 days, 1:58:58.04
    OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=SystemsEngineer
    OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=MARMUPS
    OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
    OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=0
    Total: 7
    c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.1 -v:1 -c:"scom05" -os:.1.3.6.1.2.1
    .1 -op:.1.3.6.1.2.1.2
    SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
    [ More useful network tools on http://www.snmpsoft.com ]
    OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=SSG-140 version 6.3.0r2.0 (SN: 0
    185112006000325, Firewall+VPN)
    OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.3224.1.52
    OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=359 days, 2:20:16.00
    OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=Network
    OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=XXXXXX
    OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
    OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=72
    Total: 7
    The first device is a Marms UPS which has had its firmware upgraded, which was discovered using SNMP in SCOM 2007 and the second device is a Juniper SSG-140 Firewall, again this is discovered using SNMP in SCOM 2007.
    I believe that I have setup SNMP correctly on SCOM 2012 because I have 28 other networks devices discovered using SNMP using an explicit discovery, some of these being newer Marms UPS's, emerson air conditioners, netapp SAN etc.
    I have added any and all accepted community names in the SNMP service properties on SCOM 2012 and enabled accept SNMP packets from any host.
    Does anyone have any information that they could forward to me or point in the right direction to troubleshoot this issue for eg run some snmp get commands and capture / filter traffic with wireshark, what do I look for? Any other logs to check besides the
    obvious ones? Any known issues with SCOM 2012 SP1 and SNMP, should I upgrade to R2? It just seems that some network devices get discovered with ease and others do not and I am running out of ideas. Thank you all in advance.

    Patrick, thank you for your reply.
    Yes the snmpwalk command is run from the new SCOM 2012 server which has the discovery rule on it.
    I don't have any pending network devices, its blank.
    Could there be an issue with my discovery rule? I have noticed that each time I make a change to, for eg, the access mode and change this from ICMP to ICMP/SNMP, save it, run it, it doesn't seem to update the said network devices access mode's in network
    devices, it just stays on ICMP. Do I have to manually remove the network devices which have been discovered before making any changes to the discovery rule and running it which I have done? They don't seem to appear in network devices pending management either?

  • ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    Exactly which password are you inputting? iCloud looks for your AppleID password.

  • TS3694 iOS: Device detected but not identified properly on iTunes for Windows error 54

    iOS: Device detected but not identified properly on iTunes for Windows error 54 my iPhone 4s ois 7.1.2 my pc is windows 8.1 my iTunes ver 11.3.1.2. I cant sync with itunes

    Look in your Pictures folder and delete the iPhone Photo Cache.

  • How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

  • (lms3.2) Devices discovered but unreachable?

    I recently installed lms3.2 to a newly installed cisco network.  When I run device discovery, all my cisco devices are displayed as unreachable.  What could be causing this issue?
    Thanks in advance

    Thanks for the reply,
    I checked the snmp credentials and they match on both the lms platform and the switches.  I could view and configure any devices in the chassis view. 
    Okay, I re-discovered my core router successfully, and the device as been added to RME devices.  But, sys inventory polling and collection jobs are failing, what could cause this issue?
    Rod

  • LMS 4 Devices added but not shown in inventory

    Hello,
    By reruning discovery with new seeds etc I have more devices discovered.
    Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
    Any help, is welcome.

    Hi,
    Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
    Thanks,
    Gaganjeet
    Inventory> Job  Browsers> Inventory Collection

  • Network on iPhone, but not on computer

    I'd unplugged my modem and airport express before I went on vacation. I came back home, I plugged everything in again, but now my Internet isn't working This is the situation:
    - I can see (and use) my network on my iPhone, but I can't see it on my computers (I have several computers at home, both Apple and PC. None can see my network).
    - Modem seems to be working fine, since I can use the internet on my iPhone without any difficulty
    - I've already performed a hard reset on my Airport Express, but it makes no difference.
    Can anyone help me?

    I realize your solution helped Mr. Dre, but it hasn't worked for me. I had the same issue - I have an older Dell Lat D600 laptop as well as a new macbook and an iphone, all of which were accessing the internet wirelessly on the previous model (802.11g) of the airport express. When I replaced the airport express, I set up a wireless network with WPA/WPA2 personal security, at which point my iphone was able to access the network with no trouble, but my macbook and Dell laptops could not connect. They could each see the network, but the connections were timed out.
    I spoke on the phone with an apple support tech, and she suggested I specify that the airport broadcast on channel 6, after which now the macbook has been able to connect. Still, however, the windows machine will recognize the network but not connect. When I have changed the settings to allow open access, my PC can connect, but it just times out if I use any security at all, from WEP on up. I have tried deleting my connection profiles from the PC and connecting again, but this has still not worked. Is this kind of thing a known issue?

  • USB Devices Recognized but not working!

    Having issues with working USB devices, but only some...??? Very confused. Here it is:
    - 20gig ipod, ipod mini all recognized by apple system profiler and working (shows up on desktop) Through USB and firewire
    - Canon Rebel XT (USB 2.0), Macally mouse(USB 1.0), RECOGNIZED in apple system profiler...but not working!!! Iphoto doesn't recognize a camera is connected and mouse not responding
    The camera in mouse i tested in another mac and they are working.
    If my logic board is cooked, then why would the ipods still work?? So, what is the problem???? PLEASE HELP
    luc

    Luke, many of the peripials such as cameras, printers, scanners, some will plug right in and work.
    Others, need to plugged in and restart your computer,for them to work.
    and last but not least some need there own drivers to operate correctly.
    Those that need drivers normally come with an insallation CD for this purpose... Cheers...Don

  • Device Connected But Not Showing Up In Network Map

    Network Magic Version:  5.5.9195.0
    Connection:  Cable
    Modem:  Linksys WRT54GS2
    Firmware:  1.0.02 build 007, Jan 21, 2010
    Problem Device:  Blu-ray, wireless
    Operating System:  Windows 7 Home Premium, Service Pack 1
    Anti-virus/Firewall/Spyware:  Microsoft Security Essentials/Windows Defender/Spybot
    Website Issues:  I can visit any site
    My blu-ray is connected to my network.  I know this because I have no issue streaming Netflix.  However, it is not showing up on my network map.
    How do I fix this?

    Oh!  And here's another weird thing.  My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi.  I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected.  Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected.  Wonder what's different about these 3 devices (blu-ray, 2 iphones).  None were listed in the network map before I allowed them to connect yesterday.

  • Android App - works fine in Device Central but not in phone

    Greetings!
    Just looking for some general "you might try this" tips.  I've built a very basic game app for Android so I can start learning not only how to develop for Android, but also how to publish and distribute Android apps to users.
    My game works fine when I test in Device Central from Flash.  And I've been able to upload my app to the Android Market. But when I install and run on my Android phone (I've actually tested on two separate devices), I just get a light yellow screen with a series of tiny dots that move across the screen, almost like a loading indicator, but nothing happens after that.
    I've tried publishing as both an Air (Air 2) file and a Flash (Flash 10) file.  In device central, I tested the app on a Droid Incredible emulation.  The devices I've tested on are an HTC Inspire (AT&T) and an HTC Thunderbolt (Verizon).
    So, I know there's no way for someone to take my limited description above and say "this is your problem".  Again, I'm just hoping for some general tips along the lines of "try publishing in a different version of Flash".
    Any suggestions for where I should start digging? 
    Thanks in advance!
    Joel

    Sign out of the store on your phone, then sign back in. Note having content from more than one country's store may complicate the process of updating apps and downloading past purchases.
    tt2

  • Managing Computers with 10.5 Server, but NOT managing Local accounts?

    I'll try my best to be clear here - I'm new to 10.5 Server and a functioning Open Directory environment! (formerly used 10.3 Server and never had the OD working).
    Environment:
    School (K-8), with old iMac G3's (10.3.9), eMacs (10.4.11) and a smattering of Mini's and iMacs (10.5.x).
    Server:
    10.5 Server, OpenDirectory and DNS appear to be working perfectly.
    User Accounts:
    Staff members have accounts for logging into sharepoints.
    No one (yet!) has server based home directories except a couple for testing.
    On each computer there is a "staff" account and a "student" account.
    These are LOCAL accounts, and do NOT have same-named accounts on the Server.
    I have bound client computers to the Server by OpenDirector
    dsconfigldap -v -f -a servername.domain.org -n configname -u diradmin -p adminpass
    Now comes the trouble;
    I have added the computers to the Workgroup Manager computers list.
    I have applied computer preference settings for the Energy Saver preferences ONLY. THey appear to have worked (managed computers slept/shut-down/started up according to the managed preference).
    NOW comes the real problem;
    The "staff" account on the managed computers is denying access to most applications on the computer!
    Note: this "Staff" account is local ONLY, and is NOT a server-hosted account.
    I have NOT tried to manage the computer preferences for applications on these computers.
    I can resolve the problem by unbinding the computer from the OD Server - but I'd prefer not to do that. I just got them all bound! And, it screws up my migration plan TOWARDS server-hosted home directories.
    I have tried managing application prefs for a COMPUTER, only to have both the STaff and Student account lose ALL of their local-only application managment settings (all of a sudden, Students can open terminal, grading programs, etc).
    I am obviously missing something!
    At this point, I'd like to back up... to NOT having my Server interfereing with the local accounts until I'm further along mapping out my migration from local-only accounts with file sharing access to Server hosted accounts and server managed preferences.
    (I will also admit I'm a bit confused about when to manage USER preferences, vs when to use managed COMPUTER preferences.).
    Tips appreciated!

    Your last question - using managed user vs. computer preferences got my attention. Mostly, I use Group managed preferences. I do use computer preferences for a laptop cart, other than that I use group preferences. Perhaps your situation calls for managing users, but using group preferences allows me to change the settings for a bunch of people all at once rather than changing settings for each user.
    In any event, check all the managed preferences for your computer level settings. And since you're using a 10.5 server, you have to check the settings for clients that are running 10.4 and earlier as well as the settings for 10.5 and later clients, as they are different.
    At the user level, if you have an OD account and a local account with the same name, the local account will determine what the user can do - I honestly don't know if managed computer prefs will override local settings, but you should look into it. This could be your problem.
    At the very least, you should avoid "testing" with systems that folks are using if you want to avoid the frustration that you are now encountering (speaking from experience i.e. similar mistakes, not preaching).

  • Just bought the ipad mini, and have the 4s phone. I have synced them, but my contacts did not sync with name connected to them, and I am getting texts on my new device now, but not my phone-what do I need to change?

    How do I delete photos from ipad mini? Also getting texts to my ipad that i just set up, but now not to my 4s. I have synced the devices, but my ipad has contacts listed without phone numbers. What do I need to change?

    go to your iPhone to settings>itunes and app store> check the box which reads automatic download apps.
    This provides for you to automatically download apps and music should you choose that option.
    Click on the area that reads 'use cellular data when automatically downloading'
    Good luck.

  • HT1937 Testing of LTE network with USIM, but not able to scan LTE network in manual selection?

    Recently i am testing LTE network and intially though of having problems with USIM card. But it turns out that the phone is the problem.
    I am testing with 4 type of handsets, I-phone5, Galaxy S4, Blackberry Z10 and Huawei 4G modem. All of them supporting the LTE and frequency that we are using. Problem is that none of the phones , will switch to LTE network scan when this USIM is inserted. They show only 2G and 3G network.Frequency is there, because i have tested with spectrum analyzer, and the E-NodeB is behaving correctly.
    Meanwhile when testing with one U-SIM from AT&T, all the handset can tune them self and show 4G signal on Manual Selectio mode.
    I am thinking on 2 possible scenarios:
    1. All these branded phones have some white list, of MCC MNC list of the carriers that support LTE. ( but then how is supposed to do some operator testing in advance, before publishing it to GSMA )
    2. The U-SIM recently produced might have something wrong in the electrical profile, that is not giving any indication to the phone about the present of USIM , instead of SIM, thus stating the check for 4G frequency as well.
    Anybody experiencing the same??

    First Root cause needs to be identified before any actions.
    I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
    Check if antivirus or firewall is playing...
    Check the same experiment with some other PC if you can.
    You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
    Since you have did all the reinstallations already
    Best Regards,
    Vijay.

  • Can I get my Game Achievements back on a new device? But not from a backup.

    I am wanting to get the new iPod Touch 5th Gen, But i'm wanting to start fresh but I want to hang onto my Game Achievements. (Game Stats and Highscores) So is it possible for me to start fresh and log into Game Center and get all my Highscores and Stats (Money etc..) once I get those apps from iTunes (Mac) again.
    I hope someone can help!

    If it's all purchased content, it's really simple. If not, then not so simple.
    To download previous purchases: http://support.apple.com/kb/ht2519
    If they aren't purchased from iTunes, then you are going to have to find them and download them onto your computer and back into your iTunes library.
    You can turn off photo syncing, and import the ones from your phone onto your computer.
    Importing photos: http://support.apple.com/kb/HT4083

Maybe you are looking for