Network dive map issue for particular user account.

Hi,
My one of the user want to access network drive.  But when he logoff or restart the system, he lost the map drive.
He is a domain user. He already have few map drive in his profile.  But now he need to map one more network drive. And special requirement is he want to access that map drive from any system from our organization. And that drive should not
get disconnect/dismount after he logoff or restart the system. 
Note:  User XYZ wants to access particular map network drive form any system, where he login in domain. And
no other user should be able to see or access that particular map drive.  
Also if user XYZ logoff or reboot the own system, Then when next time he will login again from any system, he must be able to see and access that particular
map drive.
How do i configure this....Please help.
Regards,
Santosh Pawar 

Hi,
Using Group Policy Preferences to Map Drives could meet your requirement. It based on group membership.
About how to get it, please refer to this guide:
Using Group Policy Preferences to Map Drives Based on Group Membership
https://blogs.technet.com/b/askds/archive/2009/01/07/using-group-policy-preferences-to-map-drives-based-on-group-membership.aspx 
For further help, I would like to suggest you ask Directory Services forum:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverDS
Karen Hu
TechNet Community Support

Similar Messages

  • LDAP Query for particular user account in local Administrators group on All Enabled Computer Accounts

    Need to query on all enabled computer accounts that have a particular user account present in the local Administrators group.
    Ldap query is best, because not all our machines have SCCM client
    Thanks for any help you can provide. Lisa

    Ya, I have 41800+ computer accounts in my directory. I think that option is not feasible :) Thanks for your reply.
    I can use SCCM to do this too, but only for those that the client is running on and which are online. Thanks again.
    Hope is not all lost; a scripting solution is still possible.  The difference is instead of running a central script to pull info from all computers, you let the computers report back to you with the info.
    If I were you, I'd do the following:
    1) Create a file share and adjust the permissions so that "Domain Computers" have "Modify" Permissions.
    2) Create a script similar to the 2nd link I posted above, with a bit of adjustment:  at the end of the script, write the information to the file share created in (1), and name the file
    ComputerName.txt
    3) Use Group Policy Preference Scheduled Task to deploy the script, and make sure it only runs once.
    4) Happily wait for the results to come back :)
    The main benefit of this approach is you're not restricted by the computer connectivity at the moment you run the script.  This is especially true if you have many mobile computers in your environment.  Just wait for a reasonable time (they all need
    to come back to the mother ship once a while don't they?) and the results will show up in the file share you created.
    Cheers.

  • SSAS issue with Domain user account

    Hi
    I have SSAS 2008 R2 set up running on Windows Server 2012 Standard.
    The server is registered as a part of domain.
    I have had an issue of domain user accounts accessing to a cube and it's starting to get worse. There has been no problem with a local user account (I set up a few for testing purpose). 
    I ran the role report from BIDS Helper and it finds all the domain user accounts invalid. 
    It looks like SSAS is not talking well with the domain server (Windows 2003 server standard) to verify user credentials. But the thing is that everyone is ok with the domain server except for SSAS. IT does not have a clue what's going on here and everything
    is just pointing at me right now.
    I'd like to know if there is anyway to monitor that communication between SSAS and domain server for user credential verification and any guideline on how to resolve it. Most of time, it just works again..  like 10 minitues later.. it resolves by itself.
    But this time, not!!!
    All I know is that 1. Registering the server as a part of domain 2. use domain user account to set the security. 
    MY IT department has set up network monitoring tool and says that they are 100% percent working (No connection loss. It's monitoring Active directory as well). The application installed is 'ManageEngine Applications Manager' 
    I don't know what to do here. 
    P.S Will it be related something like 'Error
    while Add user to SSAS Server - The trust relationship between the primary domain and the trusted domain failed' but it's all the domain accounts including mine are not working.
    Cheers!!!

    First check your DNS servers setting on the server you have SSAS installed. You should only use the IP addresses of the DNS servers (e.g. Domain Controllers) of your domain. Active Directory relies on proper DNS server settings. Adding public DNS servers,
    even if they are on the bottom of the list, will mess up name resolving Active Directory names. This should have been done when IT had provisioned the server. Same goes for own workstation if you run your development/management software not on the server.
    Second make sure SSAS is running under a service account that has access to Active Directory. This can be either a domain account, the local system account, or the network service account. Running SSAS under a local account or the local service account will
    not work because local accounts do not have access to Active Directory. Running SSAS under either a Managed Service Account or a Virtual Account will not work because those features require the domain at least the Windows Server 2008 R2 functional
    level.
    Third make sure the account you use to log on to SSAS is a domain account and has appropriate permissions in SQL Server and SSAS. Local accounts and SQL Server account do not have access to Active Directory

  • How to disable Wifi for one user account?

    Hi.
    I am setting up very restricted user account in Lion that I want to use on gigs when using Ableton Live 8 on stage.
    Basically, my user account should just allow to run Live 8 and nothing else.
    Is it possible that the airport get switched off when login into this particular user account?
    Thanks in advance for your help

    EDIT: If the stuff below seems more complicated than you wish to be involved in, feel free to ignore it.
    The Mac will send packets bound for the Internet to the Top-Most ACTIVE interface listed in the left side of the box at:
    System Preferences > Network
    If you set the 'Service Order' to have Ethernet at the top, whenever Ethernet is working, Wi-Fi will be ignored.
    Set Service order is available using the gear Icon at the bottom of that box.
    So all my Internet traffic is going over my Ethernet connection, even though Wi-Fi is still connected and nominally "active".

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Impact on roaming profile accounts if we Change User logon Name to Employee Number format in Active Directory for all User accounts

    I want to understand if we change User logon Name to Employee Number format in Active Directory for all User accounts, then what would be the impact on existing profile. Whether we need to change it manualy or it will connect to same profiles in terminal
    session.
    As i observed it create new profile after logon name changed to employee number where existing users profile settings get fails to load and prompt for new settings (such as outlook reconfiguration, share drive mapping etc.).
    Kindly let me know the proper process to overcome with this, how to connect same existing roaming profile with employee number format change.

    Hi,
    What if we change the user name of user account, will it have impact on roaming profiles.
    Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
    Here is an related article below for you:
    How to Rename a Windows 7 User Account and Related Profile Folder
    http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
    Best Regards,
    Amy

  • IW32- order-print is giving error for particular User.

    Dear Friends,
    IW32- order-print is giving error for particular User and output type.  Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
    Thanks In Advance for your reply.
    Anil Dasari
    Thanks In Advance.

    Hi,
    Information about dump:
    1. User and Transaction:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          06.05.2011 10:47:40
         MM Used. 13116304
         MM Free. 3639760
    User and Transaction
         Client.............. 700
         User................ "BLADEF01"
         Language key........ "N"
         Transaction......... "IW32 "
         Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
         Program............. "/MRSS/SAPLRSG_PM_ORDER"
         Screen.............. "SAPLCOIH 3000"
         Screen line......... 33
    Information on where terminated
         Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
          "/MRSS/RSG_MAINTAIN_MRS".
         The main program was "SAPLCOIH ".
         In the source code you have the termination point in line 441
         of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
    2. Info. Where it got terminated.
    Information on where terminated
        Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
         "/MRSS/RSG_MAINTAIN_MRS".
        The main program was "SAPLCOIH ".
        In the source code you have the termination point in line 441
        of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
    3. How to correct the error.
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
        "/MRSS/RSG_MAINTAIN_MRS"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1.1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2.2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3.3. If the problem occurs in a problem of your own or a modified SAP.
    I have been searching for notes recently implemented for IW32.
    Thanks and Regards,
    ANIL DASARI

  • Safari 3.1.2 crashes on startup, but only for one user account

    This is weird: If I'm logged in as one user and launch Safari, it strugggles and grinds the disk for a long time, brings my start page up partway, then crashes. If I'm logged in as another user on the same machine, Safari launches in mere seconds and works fine. I have tried re-installing Safari from scratch, and have also deleted the Library/Safari folder, all to no avail. There is clearly something about this particular user account that's messed up, but I don't know what.
    This is on an 1-GHz iBook G4 running OSX 10.4.11. Safari used to work fine on this user account as well, and I don't know what might have changed.

    First, have you installed any programs in that particular user account that are intended to enhance Safari or otherwise might influence internet/browsing activity? If so, uninstall those programs using their installers (which often have an uninstall option) or an included uninstaller if applicable.
    If you don't have any such programs installed, or that doesn't fix the problem: Make sure you're logged into the account where Safari is having problems, make sure Safari is quit, and then open that user's home folder (indicated in a Finder window sidebar by the little house icon with the username) and open the Library folder inside it, then the Preferences window inside that.
    (In other words navigate to \~/Library/Preferences, where "~" is the user's home folder.)
    Locate the "com.apple.Safari.plist" file in that preferences folder and drag it to the trash.
    Launch Safari and check to see if it's any better now.
    Message was edited by: Rachel R

  • Is it possible to setup a different language for the user account?

    Hi,
    My server is in English but many of my users will use French.
    Can I setup in WGM a different language (international) for the user?

    The settings are changed in at least three locations for a user account. Changes are made to ~/Library/Preferences/.GlobalPreferences, ~/Library/Preferences/com.apple.HIToolBox.plist, and ~/Library/Preferences/ByHost/com.apple.HIToolBox.<MACAddress>.plist. There are a lot of keys in there that get changed and might vary between 10.4.x and 10.5.x -if you have a mixed OS environment. So while you you may be able to import the first two into WGM, the last one might be the most trouble as it's machine specific.
    If you gave access to the 'International' System Prefpane, it wouldn't affect anything but the student account since their prefs are saved to a network location or to their local PHD account. Changes would revert to whatever the system default preferences were on logout. Those would be the prefs in /Library/Preferences.
    The 'International' System Prefpane has many listings for the other language choices that are installed on the system which could be a source of confusion for student users. Removing those resources, using certain tools like MonoLingual, can make certain software behave badly or even make the system unusable. Use with caution.

  • List mapped drives for all users

    Is there a way to list all mapped drives for every user  in the domain? I'd like to export it out to csv.

    Hi Ctrl,
    We can use "net use" or Wmi query "Get-WmiObject Win32_MappedLogicalDisk " in powershell, however,  these methods has some limitations, whether the current user which is used to remote access has Administrative privileges
    to their computer can determine whether that returns anything or not.
    For example, we can use Powershell Remoting to query the mapped drive from remote computers, beacause the mapped drive is to a specified user, so we also need to provide the computername and the relevant credential.
    If you deployed the GPP Drive maps, you can refer to this script:
    Get all GPP Drive maps in a Domain
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Prohibit traffic for particular users ASA5505

    Hi Community.
    I've read following guide how to use MPF and Regex.
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
    What my question is how should the ASA know which user is now surfing in the web. Does the IE or Mozilla sends the usercredentials in the webstream ? How can the ASA extract from the HTTP traffic which user is now surfing.
    Is MPF and Regex really working to prohibit traffic for particular users?
    I dont think so, the only solution in my opinion is to use a proxy server.
    Thanks guys and kind regards

    Hi Patrick,
    I think you answered your question from the start.  ASA's can do deep HTTP inspection by inspecting MIME types and looking for REGEX strings.  However, like you pointed out, unless that string specifically has the user credentials or you can implement a REGEX to pull a consistent string your not going to be able to proxy your user traffic.
    I have implemented HTTP Inspect Policy-Maps to restrict access to specific sites and I implemented the REGEX syntax to pull the URL strings.  I have only implemented on very rare occasions in the event the client didn't have a proxy and specific comprimise was communicating to a site or entity that had multiple Layer 3 destinations.
    thanks.

  • Use 1 itunes library for multiple user accounts

    Is there a way to use 1 library for multi-user accounts on mac osx? I have 4 iphones and was previously using the main account only. I'm getting tired of having everyones contact lists downloaded into my main phone. I can't seem to figure out how to sync the music to the same library.

    Hi There,
    I sync 2 iphones with the same library, and to stop the other iphones contacts adding to mine I have two groups in the address book, one has my contacts in and the other my friends. I then just sync the appropriate address book in the info pane when the iphone is plugged in.
    Hope this helps.

  • No data to retrieve in Query 1 for particular User

    Error: No data to retrieve in Query 1 for particular User
    Hello,
    We have webi report in 3.1 version which is running fine in Infoview for particular user.
    But when same report is send into Inbox of other user and if user try to run it in infoview it is giving below error.
    "No data to retrieve in Query 1"
    All the security and  group member level settings for both the user are exactly same. What could be the reason for this behaviour.
    Thanks

    Can you please check user is part of which group in enterprise receipts group.
    Also please check dynamic receipts tab of publication where data can be filtered
    Thanks,
    Swapnil

  • Lock a tcode for particular user

    Hi Experts
    i need to lock few transaction for particular users only. we have n number of roles and the transactions have been assigned to some tcodes to be reasticted  for a list of users. is there any method or program to built to restrict the users for few tcodes.is there any more query pl trigger me
    regards
    bala

    hi
    sagar:
    as you said if i start creating roles to restrict some users then there atleast 25 tcodes are there to restrict and 120 roles are to be analyzed and the job becomes hefty by creating roles and there will too many number of roles and it becomes confusion in future forecast. there fore i nedd any suggestion like that the userscan be restricted when they are trying to access that particular code or lock the screen or inform them to not access these tcodes thro some message or writing a program to restrict the users while the user exits. i have an idea but i dont know how it will work - ( I am not a ABAPER) there should be tcode or program which should list tcodes authorized for particular users and where they can be locked like SM01 ( but it will lock for all) but locking for particular users
    Am i more advanced??
    regards
    bala

Maybe you are looking for