Network does not recognize WEP password

I have a Zyxel ADSL WLAN router which was previously working fine via my airport express. Recently logged on, the airport express connection was gone.
Although airport express does see the network, trying to reconnect has been not been successful, since the password is not accepted despite previous storage in the keys.
Using my Dell the same password is remembered by the router. I am kinda puzzled now...and would appreciate a hint.
Tincup

I have this issue too.  We have just changed our router on our home network.  Same parameters, 5 devices connect without problem, given the WEP key.  Iphone appears not to forget the old network to enable us to put in new parameters.  In Settings/WIFI NETWORK, I choose my WIFI setting using the arrow on right hand side.  This brings up the advanced setting for this network and at the top of the screen should appear the option 'Forget network' - it doesn't appear.
Back on the Wifi network screen, I touch the network name - goes through a screen asking to enter password.  I enter the WEP key, but it is rejected (worked for my MacBook)
Disabling the wifi security doesn't help.
Hope the extra info helps and would much appreciate it to let me know if there is a solution.

Similar Messages

  • HT4993 I updated to ios 7, put in a password but now it does not recognize the password and will not let me get into my phone.  what do i do?

    Yesterday I decided to finally update my iphone 4S to the latest operating system 7.  It asked me for a password when upgrading but now does not recognize the password and will not let me in.  FRUSTRATED.  What do i do????

    Hi Rachel,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Judy

  • I keep getting a popup error message in Ical "server does not recognize name/password

    I keep getting a popup error message in Ical "server does not recognize name/password"  This started after they did the change to Icloud and extended our subcriptions. 
    Tricia

    I guess that the server name is incorrect, then.
    Did it ever work?
    Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

  • EHPI  does not recognize SIDADM password

    EHPI does not recognize SIDADM password while installing EHP4 with a ECC 6.00 EHP4 upgrade on AIX 6.1 ( 6100-05-03-1036)
    and Oracle 11G using EHPI tool version SAPehpi_98-10005805
    Applied SAP note 927637 - still it does not work, please help
    Getting error as below in SAPehpi.ECO file
    Phase INSTANCELIST_PRE:
    BLOCKED SIGNALS: ''
    SAPehpi> Starting subprocess 16711916 at 20111120073046
    ENV: DIR_LIBRARY=/usr/sap/SID/DVEBMGS00/exe
    ENV: JAVA_HOME=/usr/java14_64
    ENV: LIBPATH=/usr/sap/SID/DVEBMGS00/exe:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64/server:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64:/usr/sap/HRP/EHPI/jvm/jre/../lib/ppc64:/usr/sap/SID/EHPI/jvm/jre/lib/ppc64/jli:/usr/sap/SID/EHPI/jvm/jre/../lib/ppc64/jli:/usr/lib:/opt/CA/CAlib:/opt/CA/SharedComponents/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/usr/sap/SID/SYS/exe/run:/oracle/client/10x_64/instantclient
    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
    ENV: ORACLE_BASE=/oracle
    ENV: ORACLE_SID=SID
    ENV: PATH=/usr/sap/SID/DVEBMGS00/exe:/usr/java14_64/bin:.:/u/hrpadm:/usr/sap/SID/SYS/exe/run:/opt/CA/SharedComponents/JRE/1.4.2/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java5/jre/bin:/usr/java5/bin:/usr/seos/bin:/opt/CA/SharedComponents/bin
    ENV: SAPSYSTEMNAME=SID
    ENV: auth_shadow_upgrade=0
    ENV: dbms_type=ORA
    ENV: dbs_ora_schema=SAPSR3
    ENV: dbs_ora_tnsname=SID
    EXECUTING /usr/sap/SID/DVEBMGS00/exe/sapcontrol (/usr/sap/SID/DVEBMGS00/exe/sapcontrol) <args>...
    20.11.2011 07:30:46
    AccessCheck
    FAIL: Invalid Credentials
    Process with ID 16711916 terminated with status 1

    Thanks for your quick response.
    Yes , password has been changed recently after the SAP installation , not during EHPI installation, I have started EHPI  with the new password of EHPI.
    I am running this on AIX 6.1 hacmp HA environment
    The system is running in a distributed environment. To be able to proceed, the <SID>adm user will be utilized. Enter the password for the <SID>adm user. In case you are using a Windows domain user, please enter the domain user password.

  • HT204053 I just changed my  Apple Password and icloud does not recognize the password.

    I just changed my  Apple Password and icloud does not recognize the password.

    To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials.  When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud.  Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.

  • My iMac does  not recognize my password? What can I do?

    My iMac does  not recognize my password? What can I do?

    If you mean a system password, see this article http://support.apple.com/kb/HT1274

  • Trying to send pix in iPhoto and get message email server does not recognize username/password combination.

    apple message when trying to send an email " email does not recognize username/password.

    Go to iPhoto's Accounts preference pane, delete the email account and add it back. 
    The better solution, IMO, is to set Mail as iPhoto's email client in iiPhoto's General preference pane.  That gives you better access to your Contacts, a sent copy and templates similar to iPhoto's in the stationary section of Mail.

  • ICal error:  Server does not recognize your password

    Today I opened iCal on my iMac and I get an immediate error message saying that the "server does not recognize my password for my user name and says to make sure that it's entered correctly." I went to MobileMe in System Settings and everything was OK. I was able to see it on the MobileMe website but it still gives me the error message when I open iCal.

    Today, I had this exact same issue. What helped was quitting iCal, deleting the cal.me.com password in keychain, starting iCal again, then entering it again in iCal preferences. It started syncing right after that.
    People who don't have the cal.me.com password should check their general mobile me settings.
    Ghostlarke: if you sync your calenders, you ARE using MobileMe.

  • App store does not recognize my password

    app store does not recognize my password, even after I walk through the security questions, and use the link apple sends to my email.....

    Hi furiales,
    I apologize, I'm a bit unclear on the exact nature of the issues you are describing. If you are having issues connecting to the iTunes Store or App Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • Changed my email address, confirmed my password. The App Store still has old address and does not recognize my password.

    Changed my email address, confirmed my password. The App Store has old email address and does not recognize the password?

    Easy fix... it's a refresh issue. Sign out and back in with changed name.
    iOS: Changing the signed-in iTunes Store account
              http://support.apple.com/kb/HT1311

  • Time Machine does not recognize my password. Can I change or delete?

    Time Machine in my MacBook Air does not recognize my password. Can I change or delete?I'm connected to an auxiliary disc via a USB connection and power is present for both devices.  No Backup started after disc encryption and now the external disc drive can be used since the password I started with can not be used to unlock it.  Am I missing something or am I just out of luck with this external drive?

    I had already done this to no avail.  I'm wondering if I'm confusing the password to unlock the external device with the password to encrypt the disc used after it was connected to the MacBook.  If so, there is no way I can recall a password for a device I bought a decade ago (pre increased security about identity theft, etc.).  So maybe the answer is to secure a new device.

  • Password manager does not recognize windows password

    My password manager does not recognize windows password and I get a 'verification failed' after I swipe my finger.
    My finger print is recognized just fine, its the windows password that does not sync with the password manager since I had to change my windows password.
    What do I do?
    Rob

    I have the same issue   any help appreciated

  • I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.

    I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.  When I try it responds that the password is invalid.  I have connected my MacBook Pro, iPad and iPod Touch with the same password. 

    Charles Swigart wrote:
    It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
    Try putting $ (a dollar sign) in front of the password.

  • Can't connect my ipod touch to my Wifi.  It does not recognize my password when i try to join my network and I know my password is correct

    I just received an ipod touch 4 generation and very annoyed and have been trying to days to connect it to my wifi at home.  I know my passpord is correct but it does not recognize it and does not let me join my network.
    help.

    Does it say password is incorrect?
    - Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    Hello, do you have another admin account to log into for a test?

Maybe you are looking for

  • BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

    I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_Upda

  • PDF exportig problems from numbers: offset margins, pages missing

    hi, we are encountering some odd problems in numbers here.. first our problem was, that exporting a pages of a numbers document to a pdf with document margins lead to an offset of the margins. The whole content was offset and f.i. the window of an en

  • View multiple regions inside one Matrix Editor?

    How, or can it be done ? I want to look at the content of more than one region inside one matrix editor. It actually happened once accidentally. How is this done?

  • Design Mode Swing Appl

    I'm creating or generating a swing application. Then I do some work and add components or delete some ..... Sometimes , I don't know when I cant't view the form after that in the designer window. There is only a white window. null

  • Problem dismissing a JPopupMenu

    I have a DropDownCalendar class that extends JButton. I am inserting a calendar(JPanel) into a JPopupMenu. The JPopupMenu is then invoked by the user when they click on the DropDownCalendar button. When a user clicks on a date in the calendar, the da