Network does not see static IP server

what am I missing here? on the router I have assigned static IP for the win2012 server and the rest of the wkst connect to the router via dhcp. now the wksts can not see the server but can see the rest of the network. I can ping the servers IP address
but can not ping the server host name. I put the dns addresses of the server on the wksts but still the wksts can see the server.
thanks for the help---
wkst info:
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::616c:59f4:f797:
IPv4 Address. . . . . . . . . . . : 192.168.1.196(Preferr
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, September 1
Lease Expires . . . . . . . . . . : Sunday, September 14,
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
TM

Refer :
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384240(v=vs.85).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
I decided to add a router with new settting. everything is working now. thanks---
TM

Similar Messages

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Verizon FIOS Network does not see Airport Express

I recently upgraded to Verizon FIOs and they replaced my Airport Extreme Base Station an Actiontek wireless router. The new Router does not see my 2 Airport express wireless stations that I use for ITunes broadcasting. I tried a hard reset of the basestations with no luck.
I also tried to connect the old Airport Express into the ActionTek. It sees the Express stations but will not connect to the internet (Although I set up for a DHCP connection, it dtill serches for a PPPoE host)
The Verizon FIOs tech support is of no help.
Please help!!!!!!!

You will need to reconfigure your 2 AirPort Express (AX) to join the wireless network provided by the ActionTek.
OR... If you want to replace the ActionTek with your AX, it appears that you will need to ask Verizon to change to the Ethernet MAC address from the MAC address of the ActionTek. Several people have reported that this is necessary.

Rendezvous does not see printer

Hi,
One of the MACs sharing a usb printer on a AEBS network does not see the printer in Rendezvous. All the other computers printing through the AEBS can do so with no problems. OS is OS X 10.2.8.
Any suggestions are appreciated.
Ed

I'd be interested in seeing any responses here from others using a Mac running MacOS 10.2.8 to print via an Airport Extreme Base Station. It is my impression that firmware versions 5.5 and newer for the Airport Extreme Base Station have give many users of pre-MacOS 10.3 Macs problems with printing.

SQL server 2012 does not see local disks other than C being started under domain account (which is local admin on the server)

Hi all. We have a SQL Server 2012 installed to a fresh Windows Server 2012 Server. There is a service account domain\rusystem01 created to run SQL services. It is added as a Local administrator on this server.
The issue is that SQL Server does not see any local drives (other than C drive) on the server if we run it from this domain service account (for example, we cannot move any databases to any other drives or setup backup).
It works fine (and other drives ARE available) if SQL Services are started from Network service account or Local service account (which is not recommended by Microsoft). But does not work from domain account.
Any ideas how to fix this?
MCP

>Any ideas how to fix this?
Apply NTFS ACLs for the folders (and perhaps volumes*) for SQL Server. Use the Per-Service SID, rather than the Service Account for the ACLs so they survive changing the service account.
The per-service SID is "NT Service\MSSQLSERVER" for a default instance and "NT Service\MSSQL$InstanceName" for a named instance.
*Volume ACLs are set in Disk Management.
David
David http://blogs.msdn.com/b/dbrowne/
David, would you please clarify what do you propose? I open D: volume on the Disk management and grant NT Service\MSSQL$DEV account with Full control permissions. Restarted SQL - no effect. Still only C: is visible for SQL.
MCP

Ipad does not see airprint priner (HP 2545 all in one ink advantage) despite they are in the same wifi network.

I ve got Ipad 7.1.1 and use airprint printer HP deskjet 2545 ink advantage all in one series which is airprint. Ipad does not see it despite it is in the same wifi network. I have test it through printer. direct printing is available since Ipad finds printer while searching networks? I have allready turn off and restart everthing, reinstalled printer to my laptop to ckeck connection to wifi network, but still ipad cannot see airprint!!what can possilby be happening?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

IPhone 4 does not see my home WiFi network anymore.

All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
I don't see what could explain these symptoms and what would be the cure.
Help welcome
Thanks
Jacky

No luck. It changed nothing to iPhone behaviour.
Thanks anyway.
Jacky

TS1398 my iphone 4 does not see wifi network, wifes iphone 4, right beside my phone, sees networks. what to do??

iphone 4 does not see wifi networks even though wifes phone right beside mine does
what to do

http://support.apple.com/kb/TS1398

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

TS1398 my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.

Airport network form time capsule does not see airport express

Hello,
I'm rather new, bought my first apple few days ago, it's great. Have been throwing away years by using the blue screen machines
I now have mac mini, today i bought time capsule and an airport express.
time capsule to make my network and the airport express to connect my stereo.
Important: I have no internet connection yet, it will be installed in 10 days.
for now i use a mobile phone connection on the mac mini.
I installed time capsule. time machine works and airport is in the air.
With airport utility i can see the time capsule, but nothing else.
it has been there for a short time, but then time capsule was gone.
i can not find the utility to start installing airport express all over. Maybe i gave the wrong WPA2 password with the first install, but can not find the software to try again.
I placed the a.expr within 1 meter of time capsule for this test.
led of time capsule is green, led of a.expr is amber blinking.
I did a reset of the a.express, no response.
I downloaded the latest a.express client, no difference.
airport is still on. it does not see the a.express.
how to proceed?
Is it only possible ONCE to setup a.express the right way? I remember answering questions which i can not find anymore.
Sorry for the long story,
hope you can help,
Rik

oh oh oh oh........ :O
Found it.... before i connected the a.express with time capsule by a wire....does not help!
Solution is to make this wire connection between a.express and mac, then it's possible to reconfigure.
After this wire everything worked in 5 minutes.
Anyway.... thanks for reading...
Rik

Macbook air does not see iPhone's (4S) wi-fi network

My macbook air does not see the iPhone wi-fi network (I had been using wi-fi tethering for the last year before it suddently stopped working)
Similarly after installing the new operating system USB tethering is no longer possible....
Suggestions?
A.
PS: opertaing system:
Mac OS X Lion 10.7.5 (11G63b)

Try this fix https://discussions.apple.com/thread/4884226 and please post back how it worked. Another MBA user has reported this condition.

Satelite A30 does not see any other network devices in WLan

I recently bought a Toshiba Wireless LAN Mini PCI Card, i've installed it and managed to get it to recognise my broadband but it does not see any other network devices. I was not supplied with any drivers or software to operate the card (I bought it from a proper dealer). Can you recommend downloads that would run this card?
I have a Satelite A30 laptop 1gb ram 60GB HDD.
Also large files sometimes stop transfering (hangs)when using my USB connection. The usb controller is using microsoft driver 5.1.2600.0 dated 1 june 2002.
Is this a driver problem?

Hi
If the WLan card is properly installed so you have only not configured you settings.
I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computers must be in the same domain or workgroup.
I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.
Hi
If the WLan card is properly installed so you have only not configured you settings.
I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computer must be in the same domain or workgroup.
I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.

Network printer works wifi but iphone does not see printer

network printer works wifi but iphone 4 does not see printer

see if your printer is compatible http://support.apple.com/kb/ht4356
trouble shooting http://www.apple.com/support/iphone/assistant/airprint/

Previously networked computer does not see network

I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???

Leslie Weinberg wrote:
I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???
You might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592
They may not help, but they're easy to try and shouldn't hurt anything.

Network does not see static IP server

Similar Messages

Maybe you are looking for