Network does not work

Hello
I aqeel of Saudi Arabia
I use Google because of poor translation of language I have
Has been used to buy iPhone because I do not have enough money to buy new
Because all my friends have the iPhone and admiration for the product was purchased iPhone 4
Unfortunately, however, when the iPhone was purchased by someone who was discovered that the iPhone closed network
The very disappointed because I can not use the device and enjoy
Please, please find a solution to my problem because I have I possess the full characteristics of the device
Device information :
serial number : 83030gb1a4t
imei : 01 242400 613855 4

The iPhone in Saudi Arabia can not be unlocked it must be used with the carrier it's locked to. Is the iPhone originally from Saudi Arabia.

Similar Messages

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

  • Primary network does not work, guest network does work

    I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

    After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

  • C7 Social Network does not work!

    My nokia C7 social network does not work.
    After log in my nokia account,it does not appear facebook&Twitter.it just empty
    How to solve it?

    Did you try reinstalling Nokia Social? Which version is installed in your phone? Try the latest one http://betalabs.nokia.com/apps/nokia-social-1-3?re​q=true
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Network does not work or the network signal attenuates rapidly

    Network does not work or the network signal attenuates rapidly

    Hello shishir_teamo,
    If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Okay, the Wi-Fi doesn't work.  Turn it on.
    Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
    When responding, post in your native language as your English makes very little sense.

  • SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

    Installed on my desktop, works fine. Installed on my Laptop, does not work.
    As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
    As user the switch in the toolbar is there but it does not activate the clip window.
    On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
    Henk

    Hi Tomasz,
    as I figured out, this problem is related to the usage or measurement of the InDesign-document  at least for me.
    I create two portrait-oriented InDesign Layouts.
    For the first I choose Print-usage in the New Document-dialog.
    For the second I choose Web-usage in the New Document-dialog.
    The first will render as bitmap (wrong).
    The second will render as PDF (correct).
    Folio- and Article-Image-Type is set to PDF in both cases.
    Strange behavior.
    Regards
    Ingo
    Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
    OK. Ingo, have a look:
    attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
    Cheers,
    Tomek
    http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
    >

  • I have just upgraded to Lion and I now find that my VPN network does not work properly.  It worked fine with Leopard.

    I have just upgraded to Lion and now my VPN connection does not work properly.  It was working fine when I was using Leopard.  The VPN is My Private Network and we use it to link to BBC iPlayer when abroad.  It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site.  Any suggestions?

    Have a look at System Preferences, Accessibility, VoiceOver.
    (Command - F5).
    charlie

  • Guest network does not work

    Hi
    I have latest Airport Extreme with 2TB hard disk (Time Capsule). I have working private network after latest firmware update (7.7.2 here) except my guest network. I have tried to setup the guest network as open network and WPA/WPA2 network with password but it does not work.
    I can see the guest network but when I try to connect to it the connection does not work (= there is no internet connection or I cannot connect at all). Private network works fine (WPA2 Personal). Router mode is off (bridged network).
    Any ideas how to get it work?

    Router mode is off (bridged network).
    Any ideas how to get it work?
    The TC will nor produce a working guest network without being in Router mode.. ie DHCP + NAT.. you will not get it working in bridge.. it tricks you.. it looks so like it is going to work.. but no. it cannot.
    You must rearrange your network so the TC is main router..
    Or
    IMHO the easier way is to go and buy a cheap wireless router.. a $35 tp-link etc.. and simply use that as AP. It is cheaper, easier and much faster.. guest network is still adding clients to the same wireless.. whereas setting up a second AP allows you to have an entirely separate connection.

  • WEP network does not work

    After upgrade to Snow Leopard, I tried to connect to my home network. It uses plain WEP key (ASCII key, not a "password").
    My network at work uses WPA and after upgrade, it just worked, I did not have to set any keys or anything.
    Home network with WEP does not work. I see it, but I can't connect. I tried deleting and creating the network again in preferences. I'm sure it's 128-bit ascii key, it has to be exactly 13 characters. The network then uses DHCP and works on all other computers. I can't change to WPA, because I have a wifi-connected printer without WPA support.
    Any idea what could have changed after upgrade to Snow Leopard? I never had any problems with that network when using 10.5.

    The desired network can be the only network in the list of networks
    When you click on the desired network you are prompted for a WEP key.
    When you enter the key, the "failed to connect" shows up in the lower left corner of the dialog.
    The key was verified by two others in the room who were able to get on using the same key (one on a dell, one on an hp.)
    The network is inside a stone building so there is very little outside interference. The same laptop was able to connect to the same network last week before the upgrade to snow leopard.
    My wifes 2006 Macbook pro is unable to connect to open networks and looses our time capsule network several times a day even though it is in the same room less than 10 feet from the time capsule and has all bars lit up. This is all happening the very next day after a Snow Leopard upgrade.
    What ever changed in snow leopard, made the wireless worse. Is there a way to get the old wireless drivers back?
    Thanks for your Help
    Rob

  • File & folder sharing with privileges on my network does not work. What is wrong?

    My Timecapsule is creating a network between my iMac with OS 10.7.5 and my Macbook Pro Retina OS 10.9.2. I am trying to setup a folder on my iMac with controlled access privileges to work as a server for others using the Macbook as a client. I followed different tutorials to the letter, but it did not work, I could not get the connection. Then I called the Apple help line. It turns out that just setting it up with a 'sharing only' account etc. in 'sharing ' in the 'system preferences' is not enough. One also has to set up the same priviliges in the 'get info' window of the folder directly at the same time...so a double setup. They could not explain properly why and there is no mention of this whatsoever in any tutorial I found on the internet. Anyway, I tried that and it still did not work. When I add the user in the 'get info' window and press enter, suddenly the user does not show up in the privilege box with the user name but instead a line saying something like "searching for user" and something small dudeling next to it......I called Apple again. After two agonizing hours on the phone where I was treated like an imbecile it turns out one has to somehow go through the address book ??? Why, I have no clue and how, I do not remember, but suddenly it worked.
    Anyway, now two month later I had to add a new user account to my Macbook and I need to give it access to my server folder on my iMac. Well same problem again. I cannot remeber what we did 2 month ago an cannot call Apple, because my service period has expired. I tried myself and got the dudle in the folders 'get info' window again. Then by mistake I deleted myself as the only administrator account on the Imac from the access privileges to that shaered server folder. When I tried to put my account back into the folders privilege settings I got the same message and the dudeling thingy there too. Frustrated I thought it is best to just re-start the computer.......that was the end of it all: Now the startup window does not show my account name and icon anymore, just two lines to fill in the account name and password. The upper line has an arrow pointing left, the lower for the password an arrow pointing right. I filled in the account name and the password....the dudle circle comes and nothing happens, it seems to crash. When I click on the arrows the sign-in lines disappear, only the three buttons for going to sleep, re-start and turn off at the bottom are the only items left on the screen. I tried 10 times to no avail. This is turning into a nightmare!! My account is the only user account on this iMac.......
    What am I doing wrong? Or what is wrong with my iMac?
    Why is there nothing mentioned about these issues in the tutorials or anywhere else? Why do the tutorials say it is so easy, when even the staff on Apple's helpline cannot figure it out without having lengthy side conferences with their co-workers and managers???
    Does anybody know what I have to do again with the address book to add this external 'sharing only' user account to the folder's privilege settings?
    I assumme I have to re-boot my computer tomorrow and restore it from the Time Capsule. How do I do that? I cannot log in????
    With the setup I had working for the last two month there were still issues with acces conflict to new subfolders and files inside the shared folder between me and the Macbook account user. I have read that the solution is to create a group and give the group access privileges to the folder. However, I could not find any details on the exact steps to follow. I need the exact steps, otherwise this will turn into the next nightmare. Where can I find this info.
    I would really appreciate your help with answers and solutions to these complex issues
    Thank you

    check out managed datasources in the manuals

  • Printersharing over my local network does not work anymore

    I cannot figure it out.
    'all of a sudden' (so it seems) my 2 printers in my network do not print printjobs from other macs in my network. It dit work. Nothing really changed, exept some system-updates.
    print-share is on, awake out of sleep is on (network-tab). Really there is no reason that it would not work.
    Still, ... it doesn't.
    config:
    - imac 27" 2011, software updated
    - macmini 2010, software updated
    canon ip4200, works standard on imac.
    brother HL-2030, works standard on imac
    The charm of the set-up was that I could have my printers in the office and still print from the livingroom (mac mini)
    To try to solve the problem I moved the mac mini temporarily to the office, so I have it next to the imac.
    Opening the section 'printers and scanners' and then pressing the '+' does however give me 2 differentviews:
    - on the imac I get a sub menu, dropping down from the '+'
    - on the mac mini I get a new window named 'add new printer' (this is hopefully the right translation - I am on a Dutch system)
    This strikes me as odd. I never noticed this before. Maybe this is where the problem lies?
    Anyone, Please???
    thanks,
    Jo

    I did that. I think I did all I could think of: restart macs, adsl-router, the only place I did not look was my switch.
    I use this thing because the build-in router in de ADSL-'modem' is 'only' 10/100 Mb. I want full use of my LAN, so I bought a switch. (I have a NAS for photo's, video and itunes. It is still awaiting to be used fully, but that is another matter).
    I just solved the problem partly. ...
    I just found out that the mac-mini was attached to the router, and the imac to the switch. I just connected both to the switch which solved the problem. Also connecting them to the router solved the problem.
    So, ... my next question would be: is bonjour using a special port on my router that I should open, or is there some other reason possible? (... it has a build-in firewall ...)
    It appears to be that the problem lies in the communication between the router and the switch.
    ... Just checked that, ... and it seems to work.
    So next analysis would be ... bad connection? loose cable/connector/etc?

  • Find via network does not work

    Hi..I´m having a big trouble when trying to find images by it´s keywork when they are stored in my company server. Let´s explain
    I take some photos or even work with Photoshop, Illustrator or InDesign files. I set different keyword for the files and move it to a central folder in my server, where everyone inside the company has acess.
    The problem is: Nobody is able to find that images...In Adobe Bridge (Cs3 or CS4) they go  Edit > Find, set the criteria and run the search > not done. The unique person able to find that images by searching  via keywork is myself inside my own computer (the one I´ve set files´ keywords)
    I´ve tried everithing, check options in find dialog box, triing to centralize a cache folder in server and pointing all the bridges to that folders, purge and export cache to folders, and so on, but I do not know if it´s anything related to cache.
    In Resume, nobody is able to find images by any criteria if they are stored inside server (just the people that set keyword is able).
    How to solve it?
    Thank you a lot
    Gustavo.

    This question has been asked many times, but no one responds back as how they solved the problem.
    Seen this recent link.  It sounds like you have tried suggestions at end of post #1, and it did not work.
    If you find something that does work please post back to help others.
    http://forums.adobe.com/thread/556836?tstart=0
    Message was edited by: Curt Y
    Note:  No files will be found unless the folders are indexed. 

  • Wireless Network Does Not Work After Coming Out of Sleep

    I have a WEP connection that does not broadcast. My Airport connects to it fine. When the MacBook comes out of sleep mode, sometimes it cannot connect and does not show the network in the list of available networks (because it doesn't broadcast, but the network is setup so it should show). If I turn off Airport and then immediately turn it back on, it connects right away.
    Has anyone else had this problem? Does anyone know of a fix?

    Thanks for the reply. I don't think I need to delete and recreate the connection because just bouncing the Airport on the MacBook brings the connection back online... so I don't think there is anything wrong with the connection per se. It doesn't happen every time I come backup from sleep, just often enough that it's something I'd like to see them fix in an update if it's a problem that other people are having too.
    As for switching from WEP, I have a many wireless clients in my house including laptops, desktops, printers, console systems, and iPhones/Smart-Phones. They all support WEP, but they don't all support WPA. I'd rather try to keep from buying new network cards or new printers.

  • Guest network does not work when bridging airport express to extreme

    Hello everyone,
    i just upgraded my airport extreme 5th gen and airport express (dual band) to 7.6.3 which is supposed to enable guest network extenstion..
    my airport extreme is hardwired to airport express (set as bridged mode), eveything works fine with internet connectivity and roaming between the two since both are set with the same ssd name and wpa pass, i have enabled guest network on both to test the new update, which worked fine with airport extreme, then i went downstairs to test airport express guest network which didnt work.. i can see and join the network, IPs are set correctly exactly like airport extreme.
    while testing airport express guest network i noticed that i can only browse google website or google search results, youtube website can be accessed too but it will not broadcast youtube videos.. any other website cannot be accessed thru airport express guest network..
    since airport express guest network is providing a very limited access i tried enabling vpn on my iphone and managed to get full access with extremely slow speed.. can this be a bug on the firmware, did anyone find a solution???
    Thanks

    AirPort Extreme is the main base station handlng DHCP and NAT for the network. Normally, I do not use the Guest Network feature of this dual band router, but decided to check out the new firmware.
    The AirPort Express is normally connected back to the AirPort Extreme via a wired Ethernet connection so it functions as a separate access point in a roaming network configuration.
    I tried out the Guest Network option in the new firmware on the AirPort Express and had no issues. Then, decided to try the Express out as a test connecting using wireless only. I moved it to a location that was about 30 feet and a few rooms away from the AirPort Extreme and enabled the Guest Function with no problems.
    I would not expect your setup to work with the Guest Network features, since you do not have an Apple router installed and functioning as the main router for the network. That would be the device that "creates" the Guest Network and other AirPorts "extend" it using either an Ethernet or wireless connection.
    Apple used VLAN for the Guest Network feature before and I assume that has been expanded somewhat with the new feature to extend the Guest Network option to other Apple routers on a network.

  • Voip on an Extended N Network Does not work

    I am not really looking for an answer here, I just wanted to take the time to post this info as it took me many hours to find this out.
    System: All using Firmware 7.3.1
    Time Capsule creating a wireless network
    Airport Extreme extending the network
    Airport Express as a wireless client of the network
    Connecting a VOIP ATA via ethernet to the TC allows the system to work fine.
    Connecting the VOIP ATA via ethernet to the AEBS the voip phone system will not work.
    Connection the VOIP ATA via ethernet to the AE voip phone system will not work
    Interestingly, and this is the part that took hours to find out about, if I move the AE close enough to the TC and pull power to the AEBS so that the AE has no choice but connect directly to the TC and not the extended network the voip system will work just fine.
    I cannot figure out what the problem is with going through the extended network. I know for a fact that it is not a bandwidth issue as I have done speed tests in all configurations. When the AE is sitting next to the AEBS so it gets the same radio signal and is the same distance from the TC it will allow the system plugged into its ethernet port to work just fine. If I move the ethernet cable over to the Airport Extreme (which is set to extend the network) the voip is dead.
    I have given up on this issue, but I thought I may be able to save someone else hours of troubleshooting.

    Alright,
    Here is a facinating one, and I would welcome anyone's input on this one.
    So that same setup as the first post.
    Time Capsule (TC) creating a wireless network {N (b,g compatible)} with Allow this Network to be Extended checked. I am using WPA2 encryption with a long password.
    Airport Extreme Base Station (AEBS) extending the network
    Airport Express (AE) as a wirless client of the network.
    My Mac Pro is connected via Ethernet to the AEBS
    There are three websites I cannot get to
    bnsf.com
    lexproducts.com
    ntta.org
    My iPhone cannot get to these website either when using the AEBS as its wireless gateway; however, if i move the iPhone close enough to the TC so that it uses that as its wireless access point then I can get to all three of these websites no problem. A computer plugged into the TC via Ethernet also has no trouble getting to these websites.
    Now here it comes.... wait for it...
    If I change encryption to WPA/WPA2 still no go.
    If I turn off encryption all is well through the whole system like you would expect it to work.
    If I convert the system over to a WDS with the TC as main the AEBS as a relay and the AE as a remote I can use WPA/WPA2 encryption and still get to these websites.
    I tried many many variation of using a DMZ default host, and much work on the DNS server info. None of it made a bit of difference. Only changing the wireless settings had any effect.
    This is strangely similar to my problems with the Analog Telephone Adaptor (ATA) box for the VOIP. I never tried to switch the encryption around when working with the VOIP issue and I ended up returning the ATA so I can do no more testing. Something is going on with an extended N network that is gumming things up but for the life of me I cannot figure out what it is. If anyone has a network setup similar to mine and has an ATA I would be curious if the encryption was the cause of my earlier failure.

Maybe you are looking for