Network Down for OSPF ????

Hi
My Network is as follows:  Head office Connect to Brach Via Firewall to Firewall IPSEc VPN and Head office Router to Branch office router OSPF. Firewall and Router also OSPF. all the network are Layer 2 Connectivity.
Suddenly SOme days Ago one of my Core Router which are VRRP with Another Core Router. After That All the Branch are not up with the core Router where mentioned OSPF data base is update. after Static Router then Branch are Connected. Among 114 Branch 40 Branch are Up take time 4 Hours and 15 Branch manualy static connected. Now all branches are by two Core Router ( Repalce down Router)
The Router which is not down is not Responding at all in console.
My Question IS: This is any problem OSPF Table update 2. For Layer 2 , broadcast streeming and OSPF database full ? 3. VRRP is trouble ?
My ospf area just single for 114 Branch.
Regards
Iqbal

This includes all of
New England, apparently, as well as many other
states.
No it doesn't. My Edge service has been faster then it's ever been so far. CT works great.
Thanks for the update with billing though, that should be helpful for a lot of people who are experiencing a similar problem to you.

Similar Messages

  • Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

    Windows Server 2012 R1 with Exchange 2013 SP1
    Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain. 
    When I try to configure Outlook profile for the user, I manually enter exchange server name and user name. 
    Check User button underlines server name and user name and profile gets created successfully.
    Once I try to open outlook for the user I get
    Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
    If I search the content of the log files under
    X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
    I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
    up and then connection is torn down.

    Windows Server 2012 R1 with Exchange 2013 SP1
    Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain. 
    Hi,
    That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
    Outlook 2010 November 2012 update (14.0.6126.5000)
    See: Exchange 2013 System Requirements -
    Client Support
    Martina Miskovic

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Is the 4G network down? I have no 4G in zip 60645 for several hours now

    Is the 4G network down? I have no 4G in zip 60645 for several hours now

        Let's look further into this and provide a resolution nobama! I don't see any alerts for the zip code you provided. Are you aware if this is happening to other Verizon Wireless customers as well or just your device? Is this happening in a specific area (indoors only)? Which device do you have and when did this begin? Please try powering off your device and remove/insert the sim card and test. Please share. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport 

  • I need step by step instructions to set up Remote Desktop between 2 computers on 2 different networks. Please dumb it down for me.

    I need step by step instructions to set up Remote Desktop between 2 computers on 2 different networks. Please dumb it down for me.

    I need to do the same, but with more than one computer behind a dynamic-IP NAT:
    OS X Server A -|
                   |
    OS X Client 1  |- NAT Router Fixed IP ---|
                   |                         |
    OS X Client 2 -|                         |
                                             |
    OS X Client 3 -|                         |
                   |- NAT Router Dynamic IP -| Internet
    OS X Client 4 -|                         |
                                             |
    OS X Client 5 -|                         |
                   |- NAT Router Dynamic IP -|
    OS X Client 6 -|
    I have ARD installed on Client 1 and Client 3 (different locations where I'm at) and I need to manage Client 5 and 6 (and the others, but that amounts to the same problem). Since there are multiple computers behind the NAT, I cannot just patch a port through. I want a secure solution as the traffic goes via the internet.
    I have been thinking about letting the users of Client 5 and 6 set up a VPN link to the NAT Router of Client 1 when they need assistance, but when I want to manage this from Client 3, all traffic goes over two VPNs, let alone if the router at Client 1 can manage this in a stable way.
    Probably, two assignments in the router of client 5 & 6 would be nice, but can I tell ARD to use different ports for certain machines?

  • Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

    I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
    Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
    Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
    Thanks.

    I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info:  Mac OS X v10.6 Snow Leopard: How to Erase and Install  
                     Article HT3910
                     located at: http://support.apple.com/kb/HT3910
    Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
    That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
    I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

  • I have a 1st generation time capsule and an extreme b/g. Is the extreme slowing the network down

    I have a 1st generation time capsule and an appe extreme b/g. Is the extreme slowing the network down? Should I dump it an get the new n version?

    yes it is likely to be slowing down the network because you are using 802.11b/g
    from what i recall with b/g a slow client can slow down the entire network to that clients speed.
    this was the major improvement with 802.11n and Mimo. each client can be connected to the access point without affecting your speed to the rest of the network
    its reccomended to get all new "N" equipment if you have the budget for it. some of those old airports and time capsules can still be worth something on amazon marketplace so you might be able to sell them
    if you want to create / join / extend a netwowrk your going to probably need all "n" based equipment.
    buy the new 4th generation time capsule or the new 5th generation airport they have better stronger radios
    in the mean time configure your base station router to a high multicast rate, so it will prevent devices connecting to it at 1-2 mbps speeds and slowing down your network
    if you have an apple care covered mac remember the airport / time capsule rule. all airports and time capsules purchased 2 years before you bought your mac to the 3 years of apple care covers them. if you do not have apple care then the standard warranty applies

  • Eth0 is being up and down for several time during boot

    My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
    My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK=""
    TIMEZONE="Asia/Hong_Kong"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MOD_AUTOLOAD="yes"
    MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="antony-tp"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="yes"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
    Here is a segment of my dmesg
    [ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
    [ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 2.766808] ACPI: AC Adapter [AC] (on-line)
    [ 2.776492] wmi: Mapper loaded
    [ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
    [ 2.778291] iTCO_vendor_support: vendor-support=0
    [ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.789182] [drm] Initialized drm 1.1.0 20060810
    [ 2.789538] hub 4-1:1.0: USB hub found
    [ 2.789616] hub 4-1:1.0: 8 ports detected
    [ 2.792925] Non-volatile memory driver v1.3
    [ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
    [ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
    [ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
    [ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    [ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 2.800067] Registered led device: tpacpi::thinklight
    [ 2.800091] Registered led device: tpacpi::power
    [ 2.800106] Registered led device: tpacpi::standby
    [ 2.800120] Registered led device: tpacpi::thinkvantage
    [ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
    [ 2.801162] sdhci: Secure Digital Host Controller Interface driver
    [ 2.801164] sdhci: Copyright(c) Pierre Ossman
    [ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 2.801709] Copyright(c) 2003-2011 Intel Corporation
    [ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
    [ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
    [ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
    [ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
    [ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
    [ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
    [ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
    [ 2.802188] Registered led device: mmc0::
    [ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
    [ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
    [ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
    [ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
    [ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
    [ 2.845820] Registered led device: phy0-led
    [ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
    [ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
    [ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.943739] mei 0000:00:16.0: setting latency timer to 64
    [ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
    [ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
    [ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
    [ 2.946523] mei: unable to register watchdog device.
    [ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
    [ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
    [ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
    [ 3.274597] Bluetooth: Core ver 2.16
    [ 3.274611] NET: Registered protocol family 31
    [ 3.274612] Bluetooth: HCI device and connection manager initialized
    [ 3.274614] Bluetooth: HCI socket layer initialized
    [ 3.274614] Bluetooth: L2CAP socket layer initialized
    [ 3.274618] Bluetooth: SCO socket layer initialized
    [ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 3.276006] usbcore: registered new interface driver btusb
    [ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
    [ 3.444567] Linux media interface: v0.10
    [ 3.447387] Linux video capture interface: v2.00
    [ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
    [ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
    [ 3.448690] usbcore: registered new interface driver usbhid
    [ 3.448691] usbhid: USB HID core driver
    [ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
    [ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
    [ 3.450987] usbcore: registered new interface driver uvcvideo
    [ 3.450988] USB Video Class driver (1.1.1)
    [ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
    [ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.492062] i915 0000:00:02.0: setting latency timer to 64
    [ 3.538056] mtrr: no more MTRRs available
    [ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
    [ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.538271] [drm] Driver supports precise vblank timestamp query.
    [ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
    [ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
    [ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 4.407165] fbcon: inteldrmfb (fb0) is primary device
    [ 4.575259] Console: switching to colour frame buffer device 170x48
    [ 4.577042] fb0: inteldrmfb frame buffer device
    [ 4.577043] drm: registered panic notifier
    [ 4.607860] acpi device:01: registered as cooling_device4
    [ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
    [ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
    [ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
    [ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
    [ 5.099467] NET: Registered protocol family 10
    [ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.098038] Bluetooth: RFCOMM TTY layer initialized
    [ 6.098055] Bluetooth: RFCOMM socket layer initialized
    [ 6.098057] Bluetooth: RFCOMM ver 1.11
    [ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
    [ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
    [ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
    [ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 25.663056] eth0: no IPv6 routers present
    Any hint for tracing the root of this problem? Thank you very much!

    Hi ...
    If you have moved the Safari application from the Applications folder, move it back.
    As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
    Go to    ~/Library/Caches/com.aple.Safari.Cache.db.  Move the Cache.db file to the Trash.
    Try Safari.
    Mac OS X (10.7.2)   <  from your profile
    If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
    Update ...
    ~ (Tilde) character represents the Home folder.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Question about network statement in OSPF and BGP

    The network statements in OSPF and BGP can be used to advertise networks. But I'm not clear under what circumstances would make more sense to use network statements to advertise a network than by using other methods to have the network learned by other routers.
    Here is an example: assume I'm running BGP on router A. I want to advertise network 10.1.1.0/24 to other BGP peers. I have a OSPF route for this network. I can do 2 things: one is to use "network 10.1.1.0 mask 255.255.255.0", the other is to do "redistribute OSPF ... route-map OSPF-INTO-BGP", and create a prefix list to permit 10.1.1.0/24.
    Both would work to have this network learned by other BGP peers. But which is better for what purpose?
    Thanks a lot
    Gary

    Hi Gary,
    There is one little difference between the use of the two approaches - the route injected into BGP by using a network statement will carry an Origin attribute of IGP, whereas the route injected using redistribution will have an Origin attribute of Incomplete. Now, that is not a huge issue since you can always change that whatever value you desire both with the use of the network statement and redistribution. The important thing, however, is that in the BGP best path selection process, the Origin attribute comparison is fairly high up and will prefer a route with the attribute of IGP.
    Apart from that, there is absolutely no difference between using the network statement and using redistribution with a route-map that matches exactly on the same route that you would have specified with the network statement.
    I guess one advantage of using the redistribute approach is that it does not clutter up the BGP config. If you wish to add more routes, you simply add them to the prefix list so that you don't really touch the BGP config portion at all..
    Hope that helps - pls do remember to rate posts that help.
    Paresh

  • The Social Networks app for N8 needs an update

    The social networks app for N8 is OK, but one very critical example is that you can't see notifications on facebook, which basically is one of the most important things, to be able to see how people have directly interacted with you.
    What's nice about an update like this is that it wouldn't need to be included in a firmware update, it could be a separate update for just this app.
    What do you think needs to be improved?

    Hi...
    Tap Settings > General > Reset > Reset All Settings
    You won't lose any data or media as a result of a reset.
    If that didn't help, tap Settings > General > Reset > Reset Network Settings then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • Sync iPod with iTunes - reduce network bandwidth for iTunes music folder

    I'm using a network drive for my iTunes music folder. Average bandwidth is 50Mbps, compared to, say, an external USB HDD with hi-speed USB bandwidth of 750Mbps.
    For some reason iTunes needs to consult the files in the iTunes music folder when syncing an iPod. That is, it needs to access the music files even when there is no change and no files actually need copying from the music folder to the iPod.
    Because iTunes is reading my music files, it's really slowing down a sync.
    How do I get iTunes only to look at my music folder when there's a file to copy. Reading each file just for a sync is consuming resources and I can't see that it's necessary - iTunes knows what is in my music folder as it has the library xml file stored locally on the PC hosting iTunes.
    Anyone have any advice here ?
    Thanks.
    PS have posted this Q twice before with no replies. Hopefully yet another paraphrase to make the question more relevant with get some help from a kind soul out there.
    Here's a link to my previous post(s): http://discussions.apple.com/thread.jspa?threadID=802961

    On my Mac, if the external drive with iTunes library is not connected, it will error out and ask if I want to keep looking for the files.
    I'm using a network drive for my iTunes music folder. Average bandwidth is 50Mbps
    Why so slow? Is it wireless? What kind of connection is it?
    iTunes also wants to know if there is a file to delete or if there is a file that has changed.
    an external USB HDD with hi-speed USB bandwidth of 750Mbps
    USB 2.0 theoretical max speed is 480Mbit/s. Realistic max speed is ~60% of that.
    iTunes knows what is in my music folder as it has the library xml file stored locally on the PC hosting iTunes.
    iTunes does not use the library.xml file. It is simply created for other applications to access iTUnes library.

  • Search network directory for file JS CS3

    I need to enhance a javascript that I created a while back, by adding the functionality to search a network drive for files.
    I have been able to test for file exists on one of the volumes, but the other volume hasn't got the same stucture and needs a recursive search that drills down directories. and then back out to start the next set of folders.
    Has anyone had call to do this themselves, and if so, could you please point me in the right direction?
    Many thanks

    Thanks for that Mark.
    Every time I searched I didn't include 'recursive' and ended up with loads of discussions to choose from - yet I used the word in my question. I'm obviously working too hard!
    Problem solved now, many thanks.
    Andrew

  • Network card for G$

    Can someone recommend a network card for a G4 ?
    My built-in card died recently. I installed a DFE-530TX but couldn't get it to work with 10.3.9.
    I am looking at some of the G-wireless options but not sure which one to select.
    Any recommendation will be greatly appreciated.
    G4   Mac OS X (10.3.9)  
    power g4   Mac OS X (10.3.9)  
    G4   Mac OS X (10.3.9)  

    Hi alexago,
    Welcome to the Discussions.
    metaphyz had a page of Mac OS wireless compatibility list but it seems to be down. Google has it cacked though. Click on the words in blue above to see the cached page.
    John

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for