Network drive issues

I have a second gen Apple TV that I just purchased and I am having trouble seeing my network drive on it. I have a western digital mybook world edition external hard drive that is configured as an itunes server, it is plugged into the network and is visible to itunes.
is there a solution to this?
Message was edited by: remi-j

If you mean that you are expecting the Apple TV to connect directly to the network drive, that's not possible. An Apple TV can stream only from iTunes. You need to set the Apple TV up to stream from iTunes on your computer.
Regards.

Similar Messages

Network Drive issues - Login fails

Hello,
I've been struggling with this problem today after installing Leopard. There were no problems under Tiger.
I've got a network drive, and I can see it clearly in the Shared side-menu of a Finder window. The drive isn't set up to let Guests in, so I tried Authenticating myself with the user name and password we've used here at the office the last three years (so, I'm not typing in the wrong password..) and it says it's the wrong username or password.
I tried Command-K connecting, with a long, detailed address (cifs://WORKGROUP;USERNAME@DRIVENAME/SHARENAME) and it connects fine, fast and asks for authentication. But again, the absolutely for certain right password gets rejected.
Pinging the drive in a Terminal also confirms the drive is there, the computer has no problem seeing it.
I'm downloading 10.5.2 as we speak, so I'll see if that solves my problem. But if any of you have experienced this, or have any suggestions, I'd be delighted to hear from you.
Edit: Oh, the hard disk is connected to a Linksys Network Storage Link.
Cheers,
Jon
Message was edited by: BigJKO

I might as well add that connecting to a Windows machine works fine, so it doesn't seem to be connected to the SMB/Leopard issues I've heard people talk about.

X240 Network Driver issue with Windows PE

HelloI am working with OSD deployment in a big organisation. We are using SCCM 2012 SP1 to deploy new computers with our own image and applications. The new Thinkpad X240 is causing a big problem at the moment since we do not seem to be able to find an appropriate Ethernet network driver for the built-in Intel ethernet interface that is working in winPE 4.0. This is what happens.The computer boots, I press the F12 key, the computer presents a list of bootable devices, I choose the ethernet NIC.The computer PXE boots - it recieves an DHCP address from our server, downloads boot.wim, downloads the boot.winPE.boot.wim file and then starts winPE on the X240. It gets to "Preparing Network Connections", hangs there for a while, and then it reboots.If I use the F8 option and run ipconfig, it reports "Windows IP Configuration" and nothing else. If I run /renew it says "The operation failed as no adapter is in the state permissible for this operation". There seems to be no NIC available to winPE to start the Task Sequence with.I have downloaded the Windows 8 x64 Network driver and the Windows 7 x64 enterprise driver package Network driver from Lenovo, for this model and injected the Network drivers in the WinPe boot file. Neither of these drivers is working with the Network Interface in winPE. We do not have any problems with any other models, they all install with our SCCM 2012 SP1. Is there anyone who have experienced and resolved this? Kind regardsNick

Hello, I experiencing the strikly same situation with the same configuration :- SCCM 2012 SP1,- SCCM 2012 SP1 Boot Image x86 4.0,- Lenovo X240,- Drivers Lenovo SCCM package for Windows 7 (32-bit) http://support.lenovo.com/fr/fr/downloads/ds038819- Task Sequence W7x86. No problem when deploying an adaptated Task Sequence with Lenovo X250. However, WinPE don't allowing the network adapter to get a TCP IP configuration when deploying with Lenovo X240. To resolve this situation, do you use :- the standard boot image in the Windows 8 DVD or a customized one with Windows ADK ?- your boot image is this a x86 type or x64 ?- In case of a customized Boot Image, have you, please, some advice to give to use Windows ADK ? Best regards

Networking drive issue

Hello,
When trying to connect to my emac running 10.3.9 I only see my user account not my hard drive or my external 120gb lacie drive.
All other machines on my network show the drive and their users account when the panel comes up to select what drive to mount but when trying to connect to mine (from any other machine) only shows my user account.
This leads me to think that its a problem with mine.
How can I sort this? it sound like permissions?
Thanks

Bought a new mac to solve issue

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

SQLLOADER issues with Network Drive

Hi ,
I am running Oracle 10g in my PC ( Windows XP Professional ) in D Drive. I have created Oracle Directory and mapped to Network Drive Z: I have created external table successfully with this Directory. When i run select statement, i am getting the below error. All the permissions have given on Network Drive.
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file TBL006.txt in DI_EXTERNAL_TABLE not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
ORA-06512: at line 1
Kindly advice me on the above issue, if you know the solution.
Thanks in Advace
Hanimi Reddy

There is no solution.
Oracle simply has never supported networked drives, because you would need to run Oracle using the domain administrator account.
This poses security risks.
You need to copy the file to a local drive.
Sybrand Bakker
Senior Oracle DBA

Issue trying to use a Sharepoint document library as a network drive on which a software can create and delete content

Hi,
With my colleagues we are using a dictation/transcription software which automatically creates files, moves them from folders to folders and deletes them. Until now, all this was done on a network drive, but the drive will soon be unavailable and
we will eventually have to use a SharePoint document library instead, and I am currently testing this option.
I have created a document library (with no versioning and no check out required) and I mapped it as a drive in Windows Explorer to link the SharePoint folders with the dictation software. Everything seems to work fine except
for one thing: when the dictation software tries to move files from one folder to another, the files are pasted in the destination folder but not deleted from the original folder and an error message pops up saying "delete operation has failed".
So the softaware is able to automatically create new content in the document library but is unable to automatically delete (I can however delete manually through the software interface).
Any idea on what is causing this issue and how to solve it?
Thank you

Hi,
According to your description, my understanding is that the documents cannot be deleted in the original folder when using the software with SharePoint library.
I recommend to verify the things below:
Which credential did you use to map the document library as network drive?
If the credential was windows logon, then I recommend to check if the documents can be deleted in the network drive which was connected to SharePoint library directly.
If the documents can be deleted in the network drive which was connected to SharePoint library, then the issue may be due to the compatibility problem between the software and WebDAV. Then you need to check the issue using third-party software provider.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Having issues mapping network drives

Having issues mapping network drives to my Mac. I trying to use samba, the name of the server is Media_Server and I want it to connect to volume_1. So I put int smb://mediaserver/volume1 and I get an error.
Can anyone tell me what I'm doing wrong?

I'm not sure, but when I want to connect to the desktop my other Mac on my home LAN I use:
smb://192.168.1.105/johna/desktop

Windows 8.1 Mapping Network Drive - Credentials Issue

Hello experts-
I am attempting to map a network drive to access my WD My Cloud. However, when I select the drive to map to, it prompts me to enter my "network credentials." After inputting my Windows ID and password, I receive an "Access is denied"
error and am re-prompted to enter my credentials.
First, I want to call out that I am far from a computer-wiz so terms like "Workgroup" and "Domain Name" don't mean much to me (although I was able to find my Homegroup password, which still did not work). Can someone clearly and
simply tell me what I am doing wrong? I am only connecting 1 computer to the network drive. It seems like this should be relatively straight forward.
One potential cause: my user ID is my email so it ends in "@gmail.com" - when I begin typing it, my laptop name is displayed as the domain until I enter the @ symbol, after which it changes the domain to "gmail.com." Is there
a workaround if this is the issue?
Any help would be greatly appreciated.
-Nate

Were you able to install WDMyCloud software and have you set any password during that configuration? Maybe you would want to rerun the software again.
Or, there are some sync software that was keeping a live connection under the admin account, preventing you to use some other credentials to access the shares through Windows explorer

Renaming Network Drive + some issues

Hi everyone, I have connected a network drive to the AE base, through a self powered USB hub to which is also connected the printer.
The first issue that I seem to have is that the drive doesn't automatically load neither in Windows or the Mac. I have to use the Utility, connect and then it will show up...
The second issue is the fact that the mac puts a Network connection icon with a "NO NAME" tag underneath to show the disk. It cannot be renamed, and even if I renamed the disk plugging it directly into the mac, it will still show this No Name tag... Any ideas on how can I change that?
Thanks a lot!

Perhaps the information in KB 305040, AirPort Extreme (802.11n): USB volume does not appear in Airport Disk Utility, or appears with an unexpected name will help.

Z87-G45 Network Driver/Adapter Issue

Hello,
Since I purchased this motherboard a year and a half ago I've been having an issue with the network adapter. Typically when I boot my computer my internet won't work. When running the Windows Troubleshooting tool it says that the wired network adapter is experiencing problems. In order to get my internet to work I usually unplug and replug in the network cable a number of times, disable and reenable the adapter, and/or restart until it starts working again. Not a very clean method, but it usually works.
In an attempt to fix this issue, I downloaded the network drivers from the MSI website. I removed the driver program and uninstalled the driver from device manager. When I run the driver installer I get a message saying You must remove the following installation(s) before the setup can proceed. Please remove from Control Panel -> Programs and Features: * Qualcomm Atheros Killer Network Manager
The Qualcomm Atheros Killer Network Manager is not listed under Programs and Features since I've removed it. I cannot find anything related to Qualcomm in my computer's program files or anything. I'm really not sure where the installer references in order to determine that the program is installed - I'm thinking it could possibly be a reg key or something. Regardless, my wired internet is not working at the moment. I'd appreciate any help you guys could provide in the matter.
Thanks

Hey again,
I was able to install my network driver software, but I'm still having an issue with the network adapter. I'm not sure if this is a driver or a software issue, but like I said in the above post, in order to get my internet to work through that network adapter I have to unplug and replug in the network cable a number of times and disable and re-enable the adapter through the adapter settings page.
Would anybody be able to advise me on this?

Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.

Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.

Network drive mapping Issue in WINDOWS 8 Client

HI,<o:p></o:p>
We have 2 Win2k8 R2 Domain controller. & around 100 Windows XP & Windows 7 Client. All the network mapping which was mapped through Group policy
is worked fine.<o:p></o:p>
Recently we have added 5 machines of WINDOWS 8 Client in our Network. We have observed that in none of the Windows 8 client machines, Network drives are not
getting automatically mapped. I checked through Gpresulr/r to confirm that whether the policy get applied or not, All the Windows 8 client machines has GP Applied.<o:p></o:p>
I have run gpupdate & restart the machine, I have slow the network logging of Windows 8 Client,but it couldn't help me.
<o:p>Regards,</o:p>
<o:p>Chetan</o:p>

Hi,
In Group Policy Preferences,is "Reconnect" option ticked? If yes, please un-tick this option and check the result. Meanwhile, please check the below post which is discussing the same problem in Windows 8.
Group Policy Preferences Drive Maps Not Working in Windows 8 RTM When "Reconnect" Option is Active
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/64e01325-9b2f-477c-ab51-7b10692b583a
If this post does not help solve the problem, I suggest you ask in Group Policy forum.

Issue with network drive on E3000

So I have a brand new network drive and its NTFS formatted and when I go into the management screen all it shows is:
Disk1 : Seagate FA GoFlex Desk
Partition
File System
Capacity
Free Space
Create Share
Total
1863.016 GB
1863.016 GB
When I try to connect it returns the volume name, but cannot be mounted. When I format at FAT32 then instead of the * I see FAT32, but not so with NTFS. I owuld have gone FAT32, but the 4GB file limit is a problem.
Help? Any ideas?
Thanks.

As far as i can look into this, Your HDD should work with the same as Original Documentation that comes along with the Linksys E3000 router and also mentioned on the official website, says that it supports file system like FAT16, FAT32 & NTFS.....
What you can try is first of all take up a complete back up of the data that is already present on the HDD that you are using and then try to reformat the HDD using one of your computer...
Also check out the following links to support your cause
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=1eb1e107d62d49b8ba23b...
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0868d4e24a6a468280c3c...

Error message when mapping to a network drive of a DFS share on Windows 7

Hi,
We are getting the following error when mapping to a network drive of a DFS share on Windows 7:
“The mapped network drive could not be created because the following error has occurred:
A specified logon session does not exist. It may already have been terminated."
In our case, the user logs on his workstation using his regular domain account, then maps to the network DFS share using the service account of an application.
There is a fix from Microsoft (MS KB968264). But this fix requires disabling the "Network access: Do not allow storage of credentials or .NET Passports for network authentication” property. This is against the Microsoft own best practices (Network access:
“Do not allow storage of passwords and credentials for network authentication” should be set to
ENABLED), and is NOT acceptable for us for obvious security reasons.
Question: Does anyone know an alternative fix to this issue that does not introduce security risks?
Thank you in advance!
Mdjona

Again I have tried this, but in my program if I try to save to the a drive when no disk is inserted, the JOptionPane i want to display is not coming up.
the system prints out
java.io.FileNotFoundException: A:\image.jpg <The device is not ready>
If that makes any sense to you

Network drive issues

Similar Messages

Maybe you are looking for