Network driver for Symantec Ghost with new X240

Good morning,
I just got in a couple of X240 laptops and I want to use Symantec Ghost to image them. I use the Ghost Console TFTP boot option. Which driver should I add to the image so that I can get the two to interact?
-March

You will need to add a Vista based 32 bit driver through the Ghost Boot Wizard and then rebuild the boot package.  GSS currently uses WinPE 2.0, which is the Vista version of WinPE.  If there are no Vista drivers available for the NIC, then using DOS as the PreOS may be the solution.

Similar Messages

  • I am new to mac.  Do I need to store photos on the hard drive to use iPhoto or can I store pics on a network drive and still edit with iPhoto?

    I am new to mac.  Do I need to store photos on the hard drive to use iPhoto or can I store pics on a network drive and still edit with iPhoto?

    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    See this article
    http://support.apple.com/kb/TS5168
    for more. Note also the comment:
    “Additionally, storing the iPhoto library on a network rather than locally on your computer can also lead to poor performance or data loss.”

  • Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Yes, if the drive is formatted in Mac OS Extended (Journaled).
    The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

  • Using external hard drive on a Time Capsule as a network drive for PCs.

    I own a Macbook Air and am using a 2TB Time Capsule router. I am currently using for automatic backups for my Macbook Air.
    I also own 2 PC laptops for the rest of the family. Would it be possible to use an external hard drive connected to the USB port of the Time Capsule as a network drive for the PCs? I want to share files between the two PCs.
    Thanks

    Yes, you can do that.. although it is not necessarily as straight forward as you might think it should be.
    1. The TC has to be running SMB compatible names. short, no spaces, pure alphanumeric.
    2. The disk must be formatted to file system the TC can read. HFS+ or Fat32.. but the HFS+ is vastly superior.. the actual format is irrelevant from sharing point of view as it is still shared via SMB to the network.
    3. It is slow.. half the speed of the same drive plugged into your computer.. although if the connection is over wireless that is probably irrelevant.
    4. You might need a powered hub to get the drive to work.. Apple underpower the USB.. and even a powered disk still won't work.
    5. There are some issues with the TC getting the USB drive to work.. too many factors to say you will have issues or not.. but be aware this is not as straight forward as it could be. or should be.
    6. If you want to share files.. you can always share them directly.. pc to pc or pc to mac.. there is no necessity to do it via a network store.. You can also use the 2TB internal drive.. create a disk image and you can then store you data in that. Internal drive is much more reliable and faster.
    See http://pondini.org/TM/TCQ3.html

  • Powershell script to search a network drive for .mdb files and export them to CSV file

    Hello all,
    I'm trying to search one of our network drives for old .mdb files, I want to write the name, location and date last modified to a csv file.
    Get-WmiObject -Class CIM_DataFile -Filter "Drive='S:' And Extension='mdb'
     AND ObjFile.drive
     AND objFile.FileName
     AND objFile.FileSize
     AND objFile.LastWriteTime" |
    Export-CSV c:\mdb_search\mdbfiles.csv\
    Obviously this isn't working or I wouldn't be posting.  I've tried many different examples from the net with no joy for now.
    Thanks for any help you can offer.

    Thanks, that did the job.
    Cheers, you're welcome.
    How do I get the powershell cursor to return to C:> ?
    Should I use "exit" or "break" ?
    Neither, the console will return to a prompt when the search has been completed.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Unable to map master page gallery as network drive for migrated sitecollection

    Hi all,
    I am unable to map the masterpage gallery as network drive for design manager for a migrated site.
    This is a windows 2008 server r2 OS. Desktop experience in installed.
    I am able to map the master page gallery as network drive for two other site collections which is not migrated.
    But for the current migrated sitecollection, it throws the familiar error that it is unable to connect.... I already tried unistalling and reinstalling desktop experience.
    Kindly help.

    Hi sanjuv,
    According to your description, my understanding is that you can't map master page gallery in network drive for certain migrated site collection.
    If you can open the master gallery with explorer, it means the master page gallery really exists. I suggest you check if the path is valid in the network drive. You can find the detailed path information with the articles below:
    1.On the site for which you are creating a design, start Design Manager. (For example, on the Settings menu, choose Design Manager.)
    2.In the numbered list, select Upload Design Files.
    3.The Design Manager: Upload Design Files page contains the location of the Master Page Gallery. The location probably ends in /_catalogs/masterpage/. This is the location to which you will map a network drive.
    4.Make a note of the location of the Master Page Gallery, or copy it to the Clipboard.
    Here is a detailed article for your reference:
    Map a network drive to the SharePoint 2013 Master Page Gallery
    If the issue still exists , I suggest you can check the link below to troubleshooting the connection error with Network drive. You can try to install the kb of IE10 below to test if it works.
    https://support.microsoft.com/kb/2616712/en-au?wa=wsignin1.0
    https://support.microsoft.com/kb/2846960
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • MOVED: Cant load networking driver for neo 2 plat

    This topic has been moved to AMD64 nVidia Based board.
    Cant load networking driver for neo 2 plat

    1. Put your Windows CD in the drive.
    2. Select Install Windows.
    3. Let install continue.
    4. After the first restart, you will see something about Recovery Console.  Do NOT select this option.  Just let setup continue.
    5. You will soon see a message "searching for existing Windows installation".
    6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
    7. Select REPAIR.
    8. Just keep going.
    That's it.  Hopefully things will be just fine after the repair is done.

  • Network Drives for All Users

    I am looking to map a few network drives for any user that logs into our iMac.  Is there a way to do this?  I know how to do it on a per user level.  We just need a few drives to be mapped at all times. Thanks.

    Autofs: Automatically Mounting Network File Shares in Mac OS X
    Using the Mac OS X automounter

  • Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    I see a mention of Google Chrome and VirtualBox in your log. Stop using those and see if the situation changes? From what we know so far, the problem is a software one (Apple's fault), not a hardware problem. Mountain Lion is supposed to fix the issue, which should be out in about a week. So you could wait til then, upgrade to ML, and see if its still crashing or not.

  • How do install the network adaptor for windows 7 with boot camp?

    How do I install the network adaptor for windows 7 with boot camp?

    boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp 

  • Laserjet 2600n network driver for vista 64bit

    Is there any way I can have a network driver for HP Laserjet 2600n for Windows Vista 64bit .

    Vista 64 bit drivers for Laserjet 2600n can be downloaded from the following weblinks:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... 
    Refer the following two links to configure the printer on Network
    Link1:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
    Link2:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Network drives and time machine with Lion

    Since upgrading to Lion my MyBookWorld network drive is no longer working with time machine.  The drive is recognised as being there by finder and time machine but when I try and connect to it as registered user there is a warning saying  There was a problem connecting to the server "MyBookWorld.Local". This drive was working fine until I upgraded to lion.  There is no new firmware from Wesern Digital for the disc.  It looks like that will be the solution.  does anyone have any idea when that may be forthcoming?

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • VIA Rhine NDIS Driver FOR NORTON GHOST

    Hi,
    I've got MS KT4AV mobo with integrated LAN (driver is VIA Rhine II Fast ethernet).
    I have all the drivers on driver CD and you can download them from numerous sites but it's very hard to get the NDIS / DOS driver.
    I need to create disc to boot up norton ghost 2003 to work peer to peer.
    I've used numerous other LAN cards and drivers and there NDIS2 drivers have always contained an oemsetup file for with setup information.
    All the VIA drivers I've found have no NDIS2 folder and the oemsetup file is huge and is not recognised by ghost when i try to setup a NDIS2 bootable disc.
    Below is the setup info i had in with my previous SMC network card NDIS2 driver (which worked fine), but with the VIA Rhine driver the information is about 20 pages long and isn't recognised by norton (and it's not in a NDIS file anyway, it just comes with all the driver files).
    SMC1255="SMC EZ Card 10/100 (SMC1255TX)",0,ndis,ethernet,real,SMC1255,SMC1255_nif
    ; Install Sections
    [SMC1255]
    devdir=?:SMC1255.dos
    device=SMC1255.dos,@devdir\SMC1255.dos
    [SMC1255_nif]
    drivername=SMC1255$
    param=SLOT,"Slot number",int,"1,4,1",1
    param=MEDIA,"Media Type",text,"UTP,UTP_FD,UTP_100,UTP_100FD,AUTODETECT","AUTODETECT"
    Unfortunately I'm not familiar with the correct commands so wanted norton ghost to setup the disc (it always has before).
    I found a VIA Rhine NDIS2 drive at the link below but this has no oemsetup file and when i just load the DOS file it doesn't work.
    http://www.nu2.nu/bootdisk/network/
    Any ides would be appreciated.
    Thanks,
    Rob

    well..i still haven't solved it yet, coz Ghost doesn;t "like" the DOS driver...I e-mailed nvidia as well but its becoming a ping-pong match.
    Reply from nvidia:
    Quote
    Hello,
    This support website is designed to support NVIDIA direct sales products, such as the NVIDIA DualTV tuner card
    and the NVIDIA PureVideo DVD decoder, and also pre-sales questions about NVIDIA technology.
    NVIDIA is a market leader in graphics and digital media processors. NVIDIA does NOT build graphics cards,
    motherboards or PCs. While our partners and customers all choose NVIDIA's technology as a core component for
    their solutions, they do implement them differently and therefore it is not possible for NVIDIA to directly support their products.
    To obtain support, please contact the appropriate manufacturer or vendor of your product. For your convenience,
    a partial list of our partners and customers can be found here. http://www.nvidia.com/page/partner_support.html
    Best regards,
    NVIDIA
    My question to them:
    I have already downloaded the NDIS.zip as directed by your site to use with Norton Ghost 2003.
    There are only 2 DOS files:
    NVNDIS2.DOS & NDIS.DOS
    I tried building the Ghost Network Boot Disk with each of the DOS files & each time I ger this error:
    ERROR: 33 Unable to bind.
    I let the Ghost Wizard do the disk build tho' - please see attached build sheet.
    Client:   Norton Ghost
    Destination:   Floppy Drive A:
    Network Driver:
    Template:   NVIDIA nForce 4
    Driver:   NVNDIS2.DOS
    Driver Type:   NDIS2 Driver
    Configuration Files:
    AUTOEXEC.BAT:
    @echo off
    SET TZ=GHO-08:00
    prompt $p$g
    \net\netbind.com
    MOUSE.COM
    echo Loading...
    CD GHOST
    GHOST.EXE
    CONFIG.SYS:
    DEVICE=\net\protman.dos /I:\net
    DEVICE=\net\dis_pkt.dos
    DEVICE=\net\NVNDIS2.DOS
    LASTDRIVE = Z
    PROTOCOL.INI:
    [protman]
    drivername=PROTMAN$
    [pktdrv]
    drivername=PKTDRV$
    bindings=nic
    intvec=0x60
    chainvec=0x66
    [nic]
    drivername = UNDIS$

  • Belkin Network USB Hub not working with new BT Rou...

    Hi,
    I received my new hub to use with Infinity when they turn it on in a few days time.
    I connected the new router to the ADSL and all works perfectly without any set up needed.
    I installed (on my old 'sheep-dip' PC) the BT software, and now this test PC will not connect to any USB hard-drives or Printers connected to my Belkin Network USB hub.
    The Network USB hub works fine with all the other PCs in the house - but not if I install the BT software.
    (Which appears to be mainly adverts and a link for those too dim to type BT.com in a browser... ;o)
    I am guessing that this may be something to do with the software blocking use of the new BT Router using its own USB socket as a Network USB link - as this is being saved for 'future product enhancements'.  Is there anyway of curing this and still having the BT software on this machine?
    Thanks!

    Is this issue likely to go away when the Infinity service starts? - I am guessing not?

  • HT201250 Can I share an external hard drive for Time Machine with my PC?

    I am using a PC with an external hard drive. I have a new MacBook and would like to back up the files on the external hard drive as well. Time Machine set-up notified me that if I continued my external hard drive would be wiped clean. Is there a way to save the files from my PC and add Time Machine?

    Use the DIsk Utility in the /Applications/Utilities/ folder to repartition the drive. The new partition needs to be formatted as Mac OS Extended (Journaled).
    If you want to back up the contents of that drive and not use that drive for holding backups, you need to use another backup method, such as drag-copying files or cloning.
    (85248)

Maybe you are looking for