Network driver HP officejet K850 pro

Hi,
I have a Hp Officejet K850 Pro that works perfect when i connected it with usb on my macbook.
Now i connected the printer on a windows network. ( it has a network connection )
I can add the printer but i don't find the correct printer driver.When i choose the officejet K80 gimp driver ( not the correct driver, but worth trying ) de officejet K850 prints correct, but with poor quality. I search the net. I installed the hp drivers i found on HP.com but still i don't see the correct driver appear in my list.

Hi,
Thank you for your help.
I open terminal and type: /usr/local/bin/gs -h
I get the following:
Last login: Thu Apr 26 13:55:40 on console
Welcome to Darwin!
a-217-58:~ kristof$ /usr/local/bin/gs -h
ESP Ghostscript 7.07.1 (2003-07-12)
Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
Usage: gs [switches] [file1.ps file2.ps ...]
Most frequently used switches: (you can use # in place of =)
-dNOPAUSE no pause after page | -q `quiet', fewer messages
-g<width>x<height> page size in pixels | -r<res> pixels/inch resolution
-sDEVICE=<devname> select device | -dBATCH exit after last file
-sOutputFile=<file> select output file: - for stdout, |command for pipe,
embed %d or %ld for page #
Input formats: PostScript PostScriptLevel1 PostScriptLevel2 PDF
Default output device: bbox
Available devices:
alc2000 alc4000 alc8500 alc8600 ap3250 appledmp atx23 atx24 atx38 bbox
bff bit bitcmyk bitrgb bj10e bj10v bj10vh bj200 bjc600 bjc800 bjc880j
bjccmyk bjccolor bjcgray bjcmono bmp16 bmp16m bmp256 bmp32b bmpa16
bmpa16m bmpa256 bmpa32b bmpamono bmpasep1 bmpasep8 bmpgray bmpmono
bmpsep1 bmpsep8 ccr cdeskjet cdj1600 cdj500 cdj550 cdj670 cdj850 cdj880
cdj890 cdj970 cdjcolor cdjmono cfax cgm24 cgm8 cgmmono chp2200 cif cljet5
cljet5c cljet5pr coslw2p coslwxl cp50 cups declj250 deskjet dfaxhigh
dfaxlow dj505j djet500 djet500c djet820c dl2100 dnj650c epl2050 epl2050p
epl2120 epl5800 epl5900 epl6100 eps9high eps9mid epson epsonc epswrite
escp escpage escpc faxg3 faxg32d faxg4 fmlbp fmpr fs600 gdi hl1240 hl1250
hl7x0 hpdj1120c hpdj310 hpdj320 hpdj340 hpdj400 hpdj500 hpdj500c hpdj510
hpdj520 hpdj540 hpdj550c hpdj560c hpdj600 hpdj660c hpdj670c hpdj680c
hpdj690c hpdj850c hpdj855c hpdj870c hpdj890c hpdjplus hpdjportable ibmpro
ijs imagen inferno iwhi iwlo iwlq jetp3852 jj100 jpeg jpeggray la50 la70
la75 la75plus laserjet lbp310 lbp320 lbp8 lex2050 lex3200 lex5700 lex7000
lips2p lips3 lips4 lips4v lj250 lj3100sw lj4dith lj4dithp lj5gray lj5mono
ljet2p ljet3 ljet3d ljet4 ljet4d ljet4pjl ljetplus ln03 lp1800 lp1900
lp2000 lp2200 lp2563 lp3000c lp7700 lp8000 lp8000c lp8100 lp8200c lp8300c
lp8300f lp8400f lp8500c lp8600 lp8600f lp8700 lp8800c lp8900 lp9300
lp9400 lp9600 lp9600s lq850 lx5000 lxm3200 lxm5700m m8510 mag16 mag256
md1xMono md2k md50Eco md50Mono md5k mgr4 mgr8 mgrgray2 mgrgray4 mgrgray8
mgrmono miff24 mj500c mj6000c mj700v2c mj8000c ml600 necp6 npdl nullpage
oce9050 oki182 oki4w okiibm paintjet pbm pbmraw pcl3 pcx16 pcx24b pcx256
pcx2up pcxcmyk pcxgray pcxmono pdfwrite pgm pgmraw pgnm pgnmraw photoex
picty180 pj pjetxl pjxl pjxl300 pkm pkmraw pksm pksmraw plan9bm png16
png16m png256 pngalpha pnggray pngmono pnm pnmraw ppm ppmraw pr1000
pr1000_4 pr150 pr201 psgray psmono psrgb pswrite pxlcolor pxlmono r4081
rpdl samsunggdi sgirgb sj48 st800 stcolor sunhmono sxlcrt t4693d2 t4693d4
t4693d8 tek4696 tiff12nc tiff24nc tiffcrle tiffg3 tiffg32d tiffg4 tifflzw
tiffpack uniprint xes
Search path:
. : /usr/local/share/ghostscript/7.07/lib :
/usr/local/share/ghostscript/fonts :
/usr/local/share/fonts/default/ghostscript :
/usr/local/share/fonts/default/Type1 :
/usr/local/share/fonts/default/TrueType : /usr/lib/DPS/outline/base :
/usr/openwin/lib/X11/fonts/Type1 : /usr/openwin/lib/X11/fonts/TrueType
For more information, see /usr/local/share/ghostscript/7.07/doc/Use.htm.
Report bugs using the form at "http://www.cups.org/str.php".
a-217-58:~ kristof$
thanks!

Similar Messages

Where i can download HP Pro 3300 Series MT Network Driver for Windows XP pro SP3?

Please HELP me, i try to find a lot of web page but it not working so far.

meconnen wrote: Thank you so much for the link, but i was trying b4 it dosen't work for me. but just i need LAN driver, but the is no driver for xp. what is going on HP? read my heart...
Hello meconnen, The drivers that were linked to are for the below operating system.
Operating Systems:
Windows Server 2003 *, Windows Server 2008 *, Windows 2000 *, Windows 7 (32-bit)*, Windows 7 (64-bit)*, Windows Vista 32*, Windows Vista 64*, Windows XP *, Windows XP 64-Bit Edition*
Here is a link that has some information on where to locate the drivers for the network device.
Look at the post by julia_weiss, and write the instruction numbers down, and then click on the link to go to the Foxconn download web site, and navigate to the correct location using the information numbers provided.
When the screen opens, click on Locate lan drivers, and then details, and look at the first drivers in the list, and click on the floppy disk icon to download these drivers. They are for Windows XP 32 bit and 64 bit.
This has been confirmed to work, but I cannot verify these will.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Officejet Pro L7580 appears as a network drive in Win7

I have a new Dell desktop with 64-bit Win7. I have installed the printer with HP's latest 64-bit full software program downloaded from HP's website. My L7580 all-in-one loads on my network as a disk drive. When I click on the link it reports: "LOCATION NOT AVAILABLE. Z:\ is not accessible. An unexpected network error occured." When I right-click on the link and select "Properties" it displays the properties of a typical disk drive and not the properties of a printer. When I right-click the link and select "Disconnect" it disconnects this "Z drive". The L7580 functions perfectly whether or not I leave this "Z drive link" in my network listing and whether or not I choose to disconnect the "Z drive". At this point it is just an annoying anomaly. However, I have a networked Lexmark black and white laser printer on this same network and the Lexmark does not exhibit this behavior. I have a small home network (cable modem, Netgear 4-port router with two computers and these two printers plugged into the 4-port router. The router assigns both printers their IP addresses and I can connect to each printer's internal web page with its respective information and settings just by typing their respective IP addresses into my browser (192.168.1.x).
Just curious if any of the technical forum members have any thoughts on this anomaly. I can live with it but just don't want to if I don't have to.
This question was solved.
View Solution.

I don't think this is an "anomaly". IIRC, the printer has memory card ports. So when you install the printer software, the network drives are created as a reference to the memory card slots. They will appear even if you don't have any cards inserted. Even if you remove them now, they'll reappear after you restart the PC. All I can suggest to you is to ignore it.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

How to take Auto backup from External Network Drive to Mac pro internal Dri

Hi,
I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
Please could anyone help me on this.....
Thanks in advance

If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
I hope I wasn't help,
Sincerely,
Thomas

Running CS4 Adobe Photoshop/Premiere Pro on a network drive.

I work in IT Management and I ran into a problem with running Photoshop and Premiere Pro on a network drive. When I run the CS4 Premiere Pro I get this message on startup:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Photoshop will bring up this message:
This application has failed to start because SPROF32.dll was not found. Re-installing the application may fix this problem.
However, this error can be bypassed and Photoshop will work like normal from then on.
After looking into it our department figured out that the problem the program had was that it was running on a network drive rather than a local drive. When we ran the program on the computer's local drive these errors didn't show up at all and the programs ran flawlessly. After looking at these errors and the overall problem, does anybody know what needs to be done to have these programs run on a Network Drive?

After looking into it our department figured out that the problem the program had was that it was running on a network drive rather than a local drive. When we ran the program on the computer's local drive these errors didn't show up at all and the programs ran flawlessly. After looking at these errors and the overall problem, does anybody know what needs to be done to have these programs run on a Network Drive?
Unfortunately, your first sentence is the answer. Few programs in the Production suite run from a network drive, and need full Administrative log-in.
Good luck,
Hunt

How do I set up an internal drive in my Mac pro as a mountable network drive

Hi! I basically would like to know how to use one of the internal hard drives in my Mac pro as a mountable network drive to enable me to do full time machine backup and restores for my MacBook pro. Thanks in advance for the help!

If it's just for you, you can access and or all of your Mac Pro drives from your MBP just by logging onto the Mac Pro using the Mac Pro name and password. This is a very bad idea unless you are in a trusted environment but if you're on a home network and you trust yourself, it really works.
I've been using this technique for years on a gigabit LAN in my home. It also works logging on the other or both ways. Just pay attention to things like re-boots and shut-downs.

MacBook Pro can't connect to Time Capsule or network drives

I have a MacBook Pro (2.2 GHz, Intel i7, 4 GB RAM) and for some reason it can not connect to either the Time Capsule or any network drives. We were recently out of town on vacation and before the vacation, everything worked fine. Now, that we are back, the MacBook will connect to the wireless network and can access the internet, etc but it can not access either the Time Capsule or any drives I have setup as shared that's connected to the iMac. I go to the Network and it doesn't show anything as available to connect to.
I have restarted both the MacBook and the iMac and even turned off and back on file sharing on the iMac. I have even restarted the Time Capsule but nothing is working. Both the MacBook Pro and iMac are running Lion (10.7.2). All have the latest updates, etc. Also the Time Capsule has all of the latest firmware updates. Again, this was working fine last week. Now this week, nothing.
Can someone please help? I use the Time Capsule for backups and the network drive for iTunes. Without those, the MacBook Pro is missing a lot of functionality.
Bronson

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Shared Review - Network Drive - Acrobat X PRO problem [Urgent]

Hello,
We have a licensed genuine product of Adobe Acrobat X PRO in a company. When user is using shared review pdf on network drive ; sending as attachment works normally, sending as message (with a path to the network drive) it says an error (profile).
The error message is shown below.
What is the solution?
We have few users with same rights, so the rights should not be the problem? registry? installation?
We also had a problem with tracker. (With Programs - and Repair option on AdobeAcrobatX solved the problem, now it works...)
This error is strange.
Thanks for any information.

Any tip or solution anyone, please?
(While AdobeChatSupport was not direct about the problem)

Auto run file for installation of HP Officejet 8500 Pro A909g Missing from driver download

I have a HP Officejet 8500 Pro A909g. I downloaded the new Windows 8.1 64 bit driver as 8.1 would not allow the scanner to operate on the existing driver. Printing was fine. When i went to install the wizard, auto run file for the wizard is missing and so the installation can not run and instal the new driver.

Hello IanHP8500,
Welcome to the HP Forums.
I see that you're having an issue getting your Officejet 8500 scanning on Windows 8.1. I will do my best to help you with this issue.
Did you upgrade to 8.1 from an older version of Windows?
If so, with it not scanning correctly. You can try just removing the HP Solution Center from programs and features.
Go to the bottom left corner of your screen right click on the Windows icon> go to Control Panel> Go to Programs> uninstall Solution Center if it's listed.
Next, instead of using the printer install wizard. Download the software from this link: HP Officejet Pro Full Feature Software and Driver. Let it run through, it should prompt to " add more software". This should allow you to reinstall Solution Center.
If you run into issues, there is something you may have to do. If you get a file missing error here, or the install hangs check your computer for the following.
McAfee Live Safe - Disable the "Realtime Scanning".
Check for and remove HPOINS*.dat or HPWINS*.dat. Here is a link to a post by JonW on how to do this: Re: installer setup hangs under Windows 8.1.
Try all of this, and let me know how you make out. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Unable to install HP Officejet 8600 Pro Plus Driver on MacOS Maverick

Hi,
I have not been able to install HP printer driver on my Mac.
printer model: HP Officejet 8600 Pro plus
operating system: MacOS Maverick 10.9.3
I have tried all the advices found in the forum including deleting all the old HP files etc and still gets the following error message.
Regards

Hi HugeLau,
I would like to help you successfully install your printer software onto your Mac running mavericks. I can't say for sure what has caused this issue, but I am sure the steps below will help you to resolve the issue;
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Remove Apple HP Update
From the computer desktop, double-click the Macintosh HD  icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Double-click the PPDs  folder.
Double-click the Contents  folder.
Double-click the Resources  folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
Double-click Print & Scan.
In the Printers list, click your HP printer, and then click the Minus button to delete it.
Restart the computer and now you have a fresh start.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > HP-Inkjet-SW-OSX-Mavericks_v12.34.37.dmg
When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if this resolves the issue. thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Is it possible to use a sprint hot spot as a network connection on HP Officejet 8600 Pro?

Is it possible to use a sprint hot spot as a network connection on HP Officejet 8600 Pro?

@Johndcrum
It's possible to use a hot spot connection but its not recommended. The connection isn't reliable.

Map shared network drive from a Win XP pro machine to use with Time Machine

I have an external USB hard drive connected to a Windows XP Pro computer. The drive has two partitions that I created on my mac. One is a formated for Time Machine and one formated in fat for windows.
When connected by USB to the mac I can access both partitions and Time Machine works great. When connected to the XP I can only see and access the fat partition but Time Machine does not see it.
My goal is to have the external drive connect by USB to the XP machine (because it is always on and connected) and use the external drive to backup the pc by USB and the Mac with time machine over my wireless.
Can I do this and where am I going wrong?

Tech support advised me that this will not work. Time Machine can not backup to an shared network drive unless unless it is connected to Time Capsule. No doubt this is a marketing strategy and not a design flaw.

There is no driver for Officejet Pro 8500 for Windows 10???

Unable to find a driver for Officejet Pro 8500 under Windows 10Old driver is blocked from running. Where is an updated driver? Was working fine under Windows 8.1.

I have the same problem. Does anyone know where are the drivers for windows 10. Also, I'm able to downloand the HP print scan doctor, however, once it tells me I need the software drivers because their are not install in my computer for my officerject 8500 A909g, it still recommend the HP print scan doctor but no drivers.

I just upgraded to CC (from LR 5) on Macbook Pro and can no longer import to Network Drive. New version is LR 5.7. Help?

Just like the title says: MBP, retina works great with LR 5 installed from CD. Added CC, upgraded to LR 5.7 and now import "hangs" with no activity. Have been using LR since version 2.
More info: the problem is writing to my network drive (which has been working since LR 2... It seems a Temporary Folder is created with permissions 755 (owner=rw, group=r, others=r),
then nothing more.
Has something changed with respect to LR handling of network drives. This is a Linux CIFS/SMB share (again, been using since LR 2). Catalog is local on my MBP.

This is my post and I'm new, so I may not be providing the answer in the "usual" manner. (Feel free to educate me!)
Solution:
The mounted volume on MacBook is /Volumes/photowork. Notice the lowercase 'p' in photowork. In LR I had selected a mount point
with *uppercase* 'p'. See screen shot. Summary: The already-selected mount point was /Volumes/Photoshop. LR had no complaints. When
I changed the mount point to /Volumes/photowork LR imported as expected.
This only became an issue since the upgrade, as I simply never tinkered with mount points and so on. This archive
server has files back to 2000 on it. Thanks so much to those who responded.

Adobe Acrobat X Pro can't see Network Drives, unlike rest of Adobe Software

I can't open pdfs in any of my three network drives because my Adobe Acrobat software does not list them as existing drives!
I need some help. I'm on Windows 8, and this problem just began last week. It had been working just fine.

Hi chthao,
How frustrating! Since you got Acrobat as part of CS6, let's start with the troubleshooting tips in this document: Doesn't launch after 30 days | Installed as part of a CS6 suite.
Please let us know how it goes.
Best,
Sara

Network driver HP officejet K850 pro

Similar Messages

Maybe you are looking for