Network Drivers Fail Diagnostic

I ran a test on my system which is a hp pavillion, model # s7210n, product # eg198aa-aba. Everything passed except Network Adapters. I'm not computer savvy, and it did not give any suggestions on correcting the issue. When I went to the HP support site, it did not give me suggestions either, unless I'm not looking in the right place.
Any suggestions for solving this issue would be appreciated!
BTW, what do the network adapters do anyway?

The network adapters usually refer to the devices that allow the use of ethernet network. It can also contain the 1394 adapters.
Take a look at this page: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-adapter-problems
and open the "Show All" and go thru the troubleshooting advice.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

Failover Cluster Network Name Failed and Can't be Repaired

I have an issue that seem to be a different problem than any others have encountered.
I've scoured everything I can find and nothing has fixed my problem.
The problem starts with the common problem of the cluster network name failing on my 2 node server 2012 file server cluster. The computer object was still in AD and appeared to be fine so it was not the common problem of the object
getting deleted somehow. At the time, there was no other object with that name in the recycling bin, so I don't think it was mistakenly deleted and quickly recreated to cover any tracks, so to speak.
Following one guide, I tried to find the registry key that corresponded with the GUID of the object, but neither node in the cluster had it in its registry (which may be part of the problem).
Since it was in the failed state, I tried to do the repair on the object to no avail.
We run a "locked down" DC environment so all computer objects have to be pre-provisioned. They were all pre-provisioned successfully and successfully assigned during cluster creation. The cluster was running with no issues for a month
or so before this problem came up.
When I do a repair on the object while taking diagnostic logs the following 4609 error appears:
The action 'Repair' did not complete. - System.ApplicationException: An error occurred resetting the password for 'Cluster Name'. ---> System.ComponentModel.Win32Exception: Unknown error (0x80005000)
There appears to be a corresponding 4771 error with a failure code 0x18 that comes from the security log of the DC that states there was a Kerberos pre-authentication failure for the cluster network name object (Domain\Clustername$)
I believe this is what is causing the repair failure. All the information I found related to security error 4771 was either a bad credentials given for a user account or the fix was to reconnect the computer to the domain. I can't seem to find
a way to do this with the cluster network name. If there's a way please let me know.
I've tried a number of things, like resetting the object, disabling it, deleting and creating a new object with the same name, deleting that new object and recovering the original, etc...
Can anyone shed some light on what is going on and hopefully how to fix it other than rebuilding the cluster? I'm quite close to just tearing it down and building it back up but am hesitant because this cluster in currently in production...
Any help would be appreciated

Hi,
I don’t find out the similar issue with yours, base on my experience, the 4096 error
often caused by the CSV disk issue, and the 0x80005000 error some time caused by the repetitive computer object in OU. Please check the above related part or run the validate test then post the error information.
Although I do have a CSV, there doesn't seem to be any problems with it and it was running just fine for a month or so before the problem started. I double checked and there is no duplicate computer objects, maybe I don't understand what you mean by
repetitive, could you explain further?
The cluster validates successfully with a few warnings:
Validating cluster resource Name: DT-FileCluster.
This resource is marked with a state of 'Failed' instead of
'Online'. This failed state indicates that the resource had a problem either
coming online or had a failure while it was online. The event logs and cluster
logs may have information that is helpful in identifying the cause of the
failure.
- This is because the cluster name is in the failed state
Validating the service principal names for Name:
DT-FileCluster.
The network name Name: DT-FileCluster does not have a valid
value for the read-only property 'ObjectGUID'. To validate the service principal
name the read-only private property 'ObjectGuid' must have a valid value. To
correct this issue make sure that the network name has been brought online at
least once. If this does not correct this issue you will need to delete the
network name and re-create it.
- This is definitely related to the problem and the GUID probably got removed when we attempted a fix by resetting the object and trying the repair from the failover cluster manager.
The user running validate, does not have permissions to create
computer objects in the 'ad.unlv.edu' domain.
- This is correct, we run a restricted domain. I have a delegated OU that I can pre-provision accounts in. The account was pro-provisioned successfully and was at one point setup and working just fine.
There are no other errors nor warnings.

The VM and host networking components failed to negotiate protocol version '5.0'

I have been searching for a fix for this issue for sometime.
The VM and host networking components failed to negotiate protocol version '5.0'
and
The VM and host networking components failed to negotiate protocol version '4.0'
this error have been posting on the host server 2008 R2, with a hyper-V running server 2012 R2, which is the eval version vhd from Microsoft.
I have tried the patch on the server 2008 R2 host and the nic delete and rescan option with varied reboots and such between each step of the process just to try every possible combination.
The error persists. Are there any other suggested solutions for fixing this problem. Also the drivers have all been updated along with the system firmware.
thanks,

The hotfix states Server 2012 in the VM. You stated Server 2012 R2 in the VM. MSFT is very precise in this language - Server 2012 != Server 2012 R2.
Two distinctly different releases of Windows Server.
In this case the N = the running release of Hyper-V. In this case your Hyper-V Server at release version 2008 R2.
The +2 = the current version of Windows. In this case that is 2012 R2. Two releases ahead of the version of the hypervisor you are running.
I tossed in the link to Ben Armstrong's blog article as that is the ONLY (and still definitive statement) support statement regarding this configuration. He posted that article at my request after many folks posting in this forum with strange behavior
in this configuration.
"supported" in this context means that if you call CSS, you will be told the following: 'yes, you have errors in the event log. We will not fix that. This is an unsupported configuration. But that does not block the OS in the
VM running. If you want the errors to go away, we suggest you upgrade your Hyper-V Server to 2012 R2. That configuration is supported.'
That said, it can impact other functionality of the VM that rely on Integration Components in the VM and the Services of the hypervisor. There is most likely small things that will not work.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Satellite M645-S4110 Network drivers missing

Hello!
I'm trying to restore the network drivers for this model, but I can't even get connected when I have an ethernet cable connected directly to my modem. I'm using another laptop entirely to post this question. Please help!

Satellite M645-S4110
Downloads here.
What's the question?
In case you're doing a clean install of Windows 7, it's unlikely things will work out unless you install drivers in the right order.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here .
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 72 of the User's Guide.
Satellite M640 Series User’s Guide
-Jerry

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Network drives fail (drives used to share databases among multiple computers).

I am using databases on multiple computers to store test results for a production line. The computers share info from thier databases with each other using dsn's made with the ODBC Windows XP Admin Tool (Control Panel). This works well most of the time but occasionally one of the network drives fails - I have to disconnect and then use ODBC to make a new connection (a new dsn). Why are the network drives failing? Should I use somenthing else that is more reliable? datasocket? Shared Variable? [email protected]

Gary MavSysInc,
When you say that your program fails, are you referring to the same thing as your LabVIEW Application that is reterieving data? If so, what do you mean by it fails? Is there an error message? Does it Crash? What happens when it "fails"?
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Windows 7 Network Drivers No Longer Works

Bought a MBP a week ago, just installed Windows 7 on its own partition, installed bootcamp, everything worked fine for the first day. The next day, it did not recognize my network drivers (wireless, ethernet). Control Panel states that they are not installed correctly with an exclamation mark. I've tried installing the drivers from Windows, it 'could no find file'. I've tried reinstalling the drivers using MBP BC CD, after its finished, it reboots, and windows tries to install the remaining drivers. A windows popup keeps stating that 'driver was not installed correctly' and the BC CD does not resolve the issue. I've tried uninstalling the drivers and then manually installing as well as rebooting and allowing windows to reinstall the drivers. Nothing has worked.
So that leaves me with this conclusion, the drivers are now missing from the Windows partition as they can not be found and the drivers on the MBP BC CD will not install successfully for some strange reason. It kind of makes it hard to do anything at this point.
Before this happened, I did encounter a BSOD, but did not give me much information on why (there was a hex error code though). It's a bit frustrating not being able to install the drivers from disk, even manually. Not sure why it won't install successfully, shouldn't be a hardware issue since it works fine on OS X 10.6.
Any thoughts, help or opinions would be much appreciated.

Here are things I tried....which I accumulated from multiple forums....and, unfortunately none worked for me, but might work for you:
http://discussions.apple.com/message.jspa?messageID=11518129#11518129
What did work for me: deleting the driver. reinstalling it. rebooting my router about 5-7 times, and they finally connected.
probably just dumb luck.

Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

I have the same problem - did you solve it?

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

I have been through it again and at the end it came up with the error:

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

Remote Speaker (AirTunes) Error - "the network connection failed"

I am getting a strange error message when I try to stream music through an AirTunes remote speaker. iTunes tells me this:
*An error occurred while connecting to the remote speaker "NN". The network connection failed.*
I can't say what has changed for this error to occur. Last time I used the system it worked fine, now it doesn't. I do know I have upgraded iTunes a couple of times since, though.
I am connecting to an 802.11g AirPort Express running firmware version 6.3.
Both our computers (MacBook & MacBook Pro) run Mac OS version 10.5.8.
In my system, the AirPort Express functions solely as a wireless speaker client, as the WLAN network itself is based around an 802.11n AirPort Extreme.
The AP shows a green light, and reports no problems in AP Utility.
When I change the device's "iTunes Speaker Password" setting in AP Utility, iTunes in both our computers immediately reflect the change, so apparently the various parts in the system do speak to one another just fine. They just can't transmit music, for some reason...
Anyone have any idea what might be going on, here?

I have a similar problem. I use AE(g) with a Powerbook G4 and always get this error, which kind of bugs me, since all the settings appear to be correct. Unlike you though, I didn't make it work, not a single time — closing lid, opening and closing iTunes, resetting AE, yet no luck. Tried it all only with current versions of software.
However, the AE does sense when I unplug the speakers, since it first says "no speakers found", and then "the network connection failed". Strange is that the error has no number, nor does Console provide any clues. Sometimes it is pretty annoying when OS X just says "error". What error, where, why... Feels like good ol' windows times.
Update: Whoa, looks like we're not alone here. http://discussions.apple.com/thread.jspa?threadID=2154052&start=0&tstart=0
http://www.ilounge.com/index.php/news/comments/itunes-9-causing-airtunes-connect ion-problems/
Message was edited by: tochka

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1?

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1? I don’t have this problem with any other operating systems (Ex: Windows 7 or XP)

Can you perform a refresh ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Adobe version checker : Network connection failed

Hello all,
I recently wanted to try the new "Adobe Mobile Packager" to publish a FL application.
I succeeded in making the .sis file, with an empty certificate. When installing the .sis application, all went fine.
But when I wanted to launch it, it asked me to install the "new" other "Adobe Version Checker" application... but when it tried to connect, i have a great "network connection failed" prompting to me. and the application could not be launched.
Any idea to solve this ?
Thanks.

Hello,
Thanks for the feedback.
The device is a Nokia N95 8Go. The network I want to connect to is SFR
(French Network).
I didn't try with another network like Orange or Bouygues, I can try
this and report you the result.
Maxime Alexandre
Backelite - Pôle Solutions Mobiles
157 rue Anatole France
92309 Levallois Perret Cedex
http://www.backelite.com

I get a "Network Authentication Failed" when trying to send a picture message...any suggestions?

My daughter has a Samsung Intensity II and whenever she (or I) try to send a picture message from it, we get "Network Authentication Failed". I have tried calling *228, option 2, but that did not resolve the problem. Any other suggestions out there?

Try *228, option 1 instead to reprogram the phone. Option 2 just updates the roaming list.
Are you in an extended coverage area? You should be within a native Verizon Wireless coverage area when reprogramming the phone.

An error occurred while connecting to the remote speaker. The network connection failed.

I can't get my itunes to connect to the remote speakers via airport express anymore - I did not change any settings - but did update iTunes to 10.2.2 and now things are not working and I get his message - "An error occurred while connecting to the remote speaker “Living Room”. The network connection failed."
Does anybody have a fix for this problem?
thanks

Same problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
I've tried the suggestion of disabling ipv6. No effect.
I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas?

Network Drivers Fail Diagnostic

Similar Messages

Maybe you are looking for