Network Drives not showing

Hello,
I have a outlook 2013 and windows 8, network drivers are showing on my computer.
However, when i try to attach file the insert file dialog box does not show the network drive.
For God, and Country.

Please try to delete and re-create the network driver and then try again.
This will usually fix the issue.
Ashish Basran

Similar Messages

My external hard drive not showing up

Hello,
My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked the hard drive box the other 2 hard drives appeared but the third hard drive did not. The hard drive not showing up on my desk top does show up when I double click my system hard drive & can be opened from there, but I want to see it on my desk top. Any help would be appreciated.
Thanks

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen /V* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Network shares not showing up in finder osx Lion

The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

Open Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Drive Not Showing In Startup Disk

I have re setup my MacBook Pro, all seems well apart from this little problem. My Mac OS X Partition or Windows Partition shows in startup Disk.
Both Operating Systems do startup fine though.
I have my disk partitioned like this
Free Space
Windows 7
Mac OS X
Its setup in this way so i can use TrueCypt for the Windows side.
Does anyone know how to correct this please?
You can use this link to view a screenshot
http://www.edugeek.net/attachments/forums/mac/9912d1302462528-drive-not-showing- startup-disk-screen-shot-2011-04-10-20.07.19.png
Thanks

if you try to verify the disk, dose it report any errors? (open disk utility, click on the Macintosh HD, click on the repair tab, click verify disk.)
If you option boot, dose the computer list both Boot Volumes?
Have you tried blessing the mac hard drive?
ie: "sudo bless -folder /Volumes/Macintosh\ HD/System/Library/CoreServices -bootinfo"
(note the above bless command blesses the Hard Drive with the name "Macintosh HD", if you mac volume has a different name, change to match your hard drive's name.)

Bootcamp drive not showing up in Lion

hi! ^^
Bootcamp drive not showing up in Lion.
Lion is just downgrade version of Leopard.
nothing changed but good functions are disappear.
c:/aaa folder? i can not access directly from os x boot.
haha.

Click Start, then click All Programs.
Click Accessories, and then click Run.
Type regedit, and then click OK.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
MAKE BACKUP OF REGISTRY
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

USB External drive not showing in Finder, or on Desktop

I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
The first one shows everywhere, on the desktop, in finder and in Disk Utility.
The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
Any suggestions.

Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

Why is my External Hard Drive not showing in Aperture 3.6 Import?

Why is my External Hard Drive not showing in Aperture 3.6 Import?
Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.

Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.
I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

Adding shared printers? Network printer not showing up in list

I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

Why is it my network does not show up any longer on wifi for ipad? Have tried network reset still not tere cannot go to internet

have tried network reset but my network is not showing cnnot access internet.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iphone problem is network bar not show for searching why how can resolved my iphone

my iphone problem is network bar not show for searching why how can resolved my iphone
my iphone model is MD239B/A
my iphone serial no: DQ******TD2
<Edited by Host>

Hi mirza_ali,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
iOS: Understanding cellular data networks
iPhone: Wireless carrier support and features
I hope this information helps ....
Have a great day!
- Judy

Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter. Not sure where to go from here?.

Airport Express.
My network suddenly not showing up. Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change. Utility does not provide option for setup assistant where I could just start over. So no wifi without network set up and can't use ethernet/router to troubleshoot. I am stuck any assistance helpful.

So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC

The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
The registry still shows a Profile with the correct PROFILENAME in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
but that name does not show up in the Network List Manager Policies inside Local Security Policy.
The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
is related to this issue because of firewall restrictions.
The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
Any Help is appreciated,
CrazyDog

Hi,
Based on my research,
Network Location Awareness (NLA) service expects to be able to enumerate the
domain’s forest name to choose the right network profile for the connection. The service does this by calling
DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
removed. In addition, please do not use loopback IP address.
Here are some articles below I suggest you refer to:
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Network Location Awareness
http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
Complete Step by Step to Remove an Orphaned Domain controller
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
Best Regards.
Amy

How do I get network drives to show in left panel of media browser

Okay, I'm new to audition. When I start Audition's media browser, only the local HDD's are shown. If I OPEN FILE, I can navigate to find tyhe network drive and Audition will open the file. Also the network drives show in Windows Explorer. I searched the FAQs and the help file, but maybe I'm not using the "magic words" So, how to I get these network drives to appear?
Windows 7 64 bit home premium
home built 3.67 gb Intel Quad core, 12 GB RAM, Several local HDDs
Audition CS6
Thank you

I'm not sure this is correct. I have mapped a NAS to drive "Z" and mapped a drive on my video editing desktop to drive "Y." These both show up in the left panel of the media browser for Premiere and Photoshop as the share names "MYDOCS" and "BAAAA," as well as in Windows Explorer. But not in Audition. Only the local drives are shown in Audition's media browser.
I can open a file in audition by using BROWSE by clicking on "MYDOCS" or "BAAAA" as they appear in the Windows Explorer file dialong and then navigating on those drives to the desired files.
What am I missing? Do others have their network drives show in the left panel of Audition's media browser?

External hard drives not showing in disk utility

When I connect a new Eagle/Consus W-Series external hard drive enclosure to my 15" PB, the hard drive doesn't show-up in the left hand pane of the Disk Utility window. The only thing that shows is the drive in the PB. The hard drive in the enclosure is a WD SATA and is connected via USB cable. The same thing happens, or doesn't happen, when I'm connected via ethernet to my G5 2.3GHz Dual Core: when I open Disk Utility on the PB, the drive on the G5 doesn't show. What I'm trying to attempt is to mirror/clone Tiger from my PB onto the new, to me, G5 using SuperDuper.

Hi, Bob. I obviously didn't understand the situation properly, and now that I realize that, I'm afraid I still don't.
When the G5 is connected, via ethernet to my PB, the hard drive does not show-up in the PB's disk utility pane.
The G5 doesn't have a hard drive in it now, is that correct? So why connect it via Ethernet to the Powerbook?
If you're trying to clone the Powerbook's hard drive onto the G5's drive inside the external enclosure, all that needs to be connected is the external enclosure to the Powerbook, via USB cable. The G5 itself isn't involved in that process at all. When the G5's drive is in the enclosure and connected to the Powerbook, does it appear in Disk Utility on the Powerbook? If not, see my previous suggestions, with the exception of my comment about it not working with either computer.
If the SATA hard drive doesn't appear on the Powerbook's desktop or in Disk Utility when it is in the G5 and the computers are properly networked via Ethernet, recheck your sharing settings: the G5's drive must be shared to be visible to the Powerbook. In that mode, you may not be able to clone the Powerbook's drive to the other one, because the drive in the G5 is being used to run the G5. But if the G5's drive is partitioned, you should be able to clone the Powerbook's drive, via Ethernet, to a partition other than the one which contains the OS that's running the G5.
While the hard drive is in the external enclosure, I can hear it spinning, and am assuming that all the connections are working properly.
If the drive spins, you can be sure it's getting power, and that's good. But you can't safely conclude from that that any or all of the data connections are working properly; in fact the evidence suggests the contrary.
In short, there may be not one but two problems at work here: incorrect sharing settings when the two computers are networked, and a bad cable, connection, or enclosure when the drive is connected to the Powerbook via USB.
EDIT: Let me also add that if the only Tiger installer discs you have are the ones that came with the Powerbook, then having copies of that Tiger installation on both of your computers would be a violation of the software license that accompanied those discs, which entitles you to have Tiger installed on only one computer at a time. If that's the case, you should really buy a retail Tiger installer disc to use on the G5.
Message was edited by: eww

Network Drives not showing

Similar Messages

Maybe you are looking for