Network drives show while connected

I have a WD NetworkCenter Drive connects to the network via CAT5, here is the poser, this will not connect or be seen while I am wireless, but once I plug in the CAT5 Cable, all SHARED drive connections are there. Would some one please tell me what am I missing here? I have a MBP with the latest and greatest OS, up to date, and am connecting through and Airport Express.

Thank you for the reply
1. I have looked all over as to where I can set the router mode and cannot find anything referring to what you posted.
2. The default router address the the home is based on starts with 192.168.58.55 the WD Netcenter Drives IP is 192.168.58.106 , so to me thats GOOD TO go Correct?
3. I am accessing the Airport Express Via, the Airport Utility in the Utilities section on my MBP

Similar Messages

Adding a local site to Dreamweaver CC that is through a mapped network drive breaks ALL connections

I am using Dreamweaver CC on Windows 8 on a machine that is hooked up to a local network. My site files are stored on another drive on that network and I am mapped to that drive. I have always been able to open in individual file from that drive in Dreamweaver. But I noticed that with one site I am working on, Dreamweaver would hang trying to make minor revisions to the PHP code. It was suggested to me to add the whole folder as a local site in Dreamweaver, so I did. At first I thought it was moving along much better -- no hanging while I was typing code. Then suddenly I realized I could not save the files. I was no longer connected to the drive I was working on. Even outside of Dreamweaver, I was unable to access the drive. I thought it was a network issue. I rebooted the computer and opened a Windows Explorer folder and was able to access the drive. Then I opened Dreamweaver again and the connection was lost.
To test my theory, I rebooted again, accessed the drive, waited a little while, accessed the drive, then opened Dreamweaver and it was lost. I tried this several times, each with the same result.
Then I went into Dreamweaver, removed the site from Dreamweaver and rebooted. I accessed the drive, opened Dreamweaver, and voila... I could still access the drive. So I tried adding the site back to Dreamweaver and I cannot access the drive after opening Dreamweaver again.
Without having the site in Dreamweaver, the files/Dreamweaver hangs EVERY TIME I TYPE CODE. Adding a site on a mapped local network drive BREAKS MY CONNECTION and disables my ability to work on the files. Is there a reason for this and more importantly, is there a fix? It seems like a very specific but illogical problem.
My next step is to find and install my old Homesite 4.5.
Thanks in advance for any useful advice!

mpendill wrote:
I surely did not knowing change anything within the software!
I just tried adding another site. It seems like it is setting it up and reading the files but then at the end (apparently just as the connection breaks), it gives me these errors:
Cannot create [SITE NAME].
and
The local root folder, [FOLDER NAME], does not exist. Please select a new local root folder by clicking the Manage Sites button.
(I changed the out the actual site name and folder name above.)
I believe these were the same errors I got with the other site. At the time I was pushing a deadline and was too frantic to write it down.
Not that I think it has any relevance, but both sites are Wordpress sites.
Maybe what I should try next is mapping a different drive and trying to set up a site from there?
For that error you want you can try mapping it but it seems your sites root is just not defined... what DW is telling you is it could not find the specified folder when its trying to establish the new site. You might want to make sure your folder is there and all the spelling is correct, when making sure go your your Site Manager and make sure your root site is in your network drive.

Citrix ssl error 4: A network error occurred while connecting to

Connecting to a citrix session works fine on my Mac, but when i let it sleep or if i am away for a bit i get an error
SSL error 4: A network error occurred while connecting to (server/access gateway address)
Dont have this issue on windows, only on Mac
Help please

Hi there, I couldn't even get it to work, evertime I go to open it I get this error. Any advise on what I need to load onto my Mac?

How to disable smb network drive failure to connect warning

Hey,
we have a number of users using os x machines to connect on our domain, all of them have network drives configured via connect to server option smb://etc/etc
When the user is docked into the network they login just fine, obviously if they are no on the network the drive will not connect and during login they get a pop up saying connection to server failed etc etc.
Is there a way to disable this pop up ? had a number of cases this message will pop up and cause issues with login or just fail.
I do not want to demap it , I just want the message to go away as these users are highly mobile, on off the network multiple times a day.
Or is there a better way to map this drive/server ?
Thanks
GV

Thanks, but why would backuping a USB drive work and not a network drive ? I don't see much difference but maybe I'm missing something.
Is there a plan to implement that feature ? I mean Apple is offering the capability of plugging external drives into the time capsule and airport extreme, so why aren't these included in the overall scheme of backing up ? Sounds weird to me.
Also, could you please point some "hack out there" cause I didn't find any.
Thanks!

Iomega network drive no longer connects under iTunes 10.5 - lost access to all my songs. Anyone else having problems with iTunes 10.5 / IOS 5?

I have an Iomega 500Gb network drive (Connects via CAT5 cable to hub) It contains all of the music in my iTunes. It worked fine until I upgraded iTunes to 10.5 (and installed IOS5 / iCloud). Now, I can no longer access ANY of the music. The drive shows as a device in iTunes, but when I click it, it displays the songs for a split second, but they then disappear and I connot access them. The Iomega drive functions normally when accessed via a Windows browser.
Anyone else with this problem?
regards Steve

FYI: It seems it was a network problem with my WinXP PC. After complete deletion and new installation of XP and iTunes my iPhone will be recognized correctly, Wifi synchronization works (mostly) fine.

Windows 7 mapped network drive. shows as disconnected, cannot remove, not showing in registry

a mapped drive shows as disconnected but still work in terms of getting into the shared network folder on our NAS. but i want to remove it. the commapnt prompt command wont do it. you cant disconnected it because it doesnt see a networked
drive. and i looked in the registry and there isnt a registry entry for the mapped drive. in the mountpoint2 or whatever.

To troubleshoot, disconnect the connection first. Please refer to:
How To Disconnect Non-Mapped UNC Path “Drives” in Windows
http://www.howtogeek.com/howto/16196/how-to-disconnect-non-mapped-unc-path-drives-in-windows/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Network drives showing repeating copies of directory content

I'm experiencing a weird issue with mapped network drives under Windows 7. Sometimes it will list the contents of a directory normally, others it will list hundreds of copies of the contents, and sometimes it will keep listing them over and over without stopping. Occasionally refresh will show the contents correctly but it's a **** shoot. It's happening on all network drives. Server is running OES under SUSE 11 sp3 with the latest update from the beginning of the month. Have not done the distribution upgrade yet. Workstation I'm on is running Novell Client 2 SP3 for Windows 7 (IR5). I haven't noticed the issue on XP computers. Any idea what could be causing this? It seemed to start sometime in January or early February.

Originally Posted by Mysterious
On 03/12/2015 06:56 PM, FUBAR wrote:
>
> Mysterious;2349465 Wrote:
>> On 03/11/2015 07:26 PM, FUBAR wrote:
>>>
>>> No I don't have that patch installed and the problem started before
>> that
>>> patch was released. Also there is no problem accessing files it's
>> only
>>> when browsing directories that the problem shows up.
>>>
>>>
>>
>> there is a TID about it
>
> You wouldn't happen to have the number or a good search phrase to find
> it? I tried everything I could think of before starting this thread and
> couldn't find anything like I'm seeing.
>
>
tid7016264
Thanks that looks like the issue I'm having. Guess it's just wait until it's fixed since there is no resolution.

Need mac to forget network drive - it keeps connecting on bootup

How do I get my iMac to for get a network drive completely so that it won't connect on bootup.

Ok, I feel like a dummy; but happy enough to report I figured it out on my own.
Apparently AirPort Extreme assigned another IP (10.XX.XX.XX) versus my prior (192.XX.XX.XX). I only discovered this when I scrolled through the Terastation Pro display. It scrolls through the varying settings.
Once I realized a new IP was present, I used the "Go" "Connect to Server" commands.
Works great. Maybe someone will learn something from my own lesson.

Windows 8.1 search of network drives shows UNC path based results

How do I go about showing the network drive based path as opposed to the UNC based path in Windows 8.1?
In Windows 7 when the user searched for files on a network drive it displayed results that contained the network drive. In Windows 8.1 these searches yield the UNC
path.
For example, Windows 7, if I search for TestFile.docx on Z: it will show a result such as "Z:\SomeFolder\SubFolder\TextFile.docx"
Windows 8.1, if I search for TestFile.docx on Z: it will show a result such as "\\SomeServer\SomeFolder\SubFolder\TextFile.docx"

Hi,
Actually, I tested in my Windows 8.1 system, the result is that it does show (example)"Z:\folder" as the search result, like as Windows 7 system, here's the snapshot:
Or am I missunderstanding something? a snapshot from your result would be helpful.
Yolanda Zhu
TechNet Community Support

Still No Network Drives Showing in Bridge but Everywhere else?

I am still somewhat confused because if I go to open a file in CS4 I have the option to browse my network; there is a network icon there and as soon as I click on it my network is immediately accessible. When I open up Lightroom to import pictures I have the same network icon and as soon as I click on that the network is again just there.
However when I open up Bridge, it says building criteria and when it has finished it only shows me the drives attached to the computer I am currently using and there is no network icon to click on, so why is this the case when Photoshop can see it and so can Lightroom?
Can anyone figure this out because it just does not make sense!

The issue with your artwork not showing is due to the size of your artwork - I asked Apple to take a look at your artwork - please don't change anything at this time.
We will get back to you once all is fixed or if there is something you need to change.
Regards,
Rob W
libsyn

-net.sourceforge.jtds.jdbc.Driver ERROR WHILE CONNECTING TO SQL SERVER

Hi,
While making a new connection to Sql Server Express Edition Database, through Oracle Sql Developer i am getting a problem when retrieving the database.The error is "-net.sourceforge.jtds.jdbc.Driver" .I have downloaded the "jTDS - SQL Server and Sybase JDBC driver " from sourceforge website, but i am confused about where to paste it.
thanks.

I'm not sure why you are having the error but I am sure of the following:
1. This forum is not appropriate for SQL*Developer questions.
2. Or questions about code from SourceForge
3. Or Microsoft products.
It seems unlikely this has anything to do with Oracle so I would recommend you find a forum related to the driver if one exists. Otherwise you can try the SQL*Developer forum but I would be there aren't more than a dozen other people on the product trying to do this.

TM tries to backup network drives when I connect to them

I noticed TM started a backup of a couple shared drives on my iMac. TM is running on my MacBook and I don't want it to back up drives I connect to - either over the network or firewire/USB. I can't figure out how to stop this. I connect to quite a few shared drives in my network and this is a problem for me. All I want to back up is my internal drive.

In the timemachine preferences click on the options button, click the plus sign and you can add the volumes, folders or files you dont want timemachine to backup.

Odbc driver error while connecting with Oracle BI in Linux

I have Oracle BI Server, Presentation Service and Oracle 11g Client installed in RHEL 5. Oracle BI client is installed in Windows so that I can use Admin tool.
I have created a repository in Windows for sh schema(by creating ODBC). After that I transferred this repository to the ..server/repository in the linux server.
I have installed Oracle ODBC Driver from EASYSOFT and added one odbc data source for sh schema in the ../setup/odbc.ini.
My ODBC setting is as follows.
[ODBC Data Sources]
sh=Oracle in OraDb11g_home1
[sh]
Driver=/usr/local/easysoft/oracle/libesoracle.so
Database=//ipaddress_of_ORACLE_SERVER:port/database_service_name
UID=sh
PWD=sh
When I am trying to query through Oracle Answers I am getting the following error.
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
SQL Issued: SELECT Customers."Cust First Name" saw_0 FROM SH ORDER BY saw_0
I have enabled tracing, but I am not getting any clue from trace output.
Can anybody please help.
If it is because of wrong driver, can anybody suggest a proper ODBC Driver for Oracle and how to configure it. If the driver is OK and configuration is wrong, can anybody tell me how to create system dsn in linux?
Thanking you in advance.

don't use ODBC for Oracle, use OCI
search on the forum, there's plenty of information about it.

Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes - Pls Help

I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
"This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes".
i already installed 64bit version. but not connecting my iphone with itunes
PLEASE HELP.!!!!
<Personal Information Edited by Host>

Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

How do I get network drives to show in left panel of media browser

Okay, I'm new to audition. When I start Audition's media browser, only the local HDD's are shown. If I OPEN FILE, I can navigate to find tyhe network drive and Audition will open the file. Also the network drives show in Windows Explorer. I searched the FAQs and the help file, but maybe I'm not using the "magic words" So, how to I get these network drives to appear?
Windows 7 64 bit home premium
home built 3.67 gb Intel Quad core, 12 GB RAM, Several local HDDs
Audition CS6
Thank you

I'm not sure this is correct. I have mapped a NAS to drive "Z" and mapped a drive on my video editing desktop to drive "Y." These both show up in the left panel of the media browser for Premiere and Photoshop as the share names "MYDOCS" and "BAAAA," as well as in Windows Explorer. But not in Audition. Only the local drives are shown in Audition's media browser.
I can open a file in audition by using BROWSE by clicking on "MYDOCS" or "BAAAA" as they appear in the Windows Explorer file dialong and then navigating on those drives to the desired files.
What am I missing? Do others have their network drives show in the left panel of Audition's media browser?

Network drives show while connected

Similar Messages

Maybe you are looking for