Network dropping my iMac

My iMac disconnects from my wi fi network every day. Tried a network extender but same problem. Any ideas?

Hello Destingator,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iMac.  I would be concerned about this too.
I recommed following the steps in the section labeled, "Symptom: The network connection drops unexpectedly" in the following article to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

Similar Messages

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • Windows 2008 R2, Network drops even after rebuild, Please help to diagnose

    Hi there,
    I've had an issue for a while now and I have been working through it and I'm getting lost and starting to go around in circles.
    I have just rebuild up a Server 2008 R2 x64
    Configuration is
    Server: HP Prolient ML330 G6 Quad core xeon 24GB ram (between 2-3 Years Old)
    HDD: Raid1 500GB
    ip: 192.168.1.253
    su: 255,255,255.0
    gw: 192.168.1.1
    dns 1: 192.168.1.253 (Was 127.0.0.1) please read on!!!
    dns 2: empty
    Roles and SW: AD DC, DNS, DHCP and Exchange Server (in 1 box)
    My original issue was network dropping out every few weeks, progressively got worse to being daily. Restarts would fix it, tho would disconnect after hours or a day or 2.
    Issues would be that during a network outage, I cannot connect workstations to domain, no network shares. Internet was dead, and a heap of Event ID errors
    Server rebuild went well, It's a 2008 R2 setup and it runs basically everything in 1 server 2008 R2.. I know its not ideal but it's what they had setup previously.
    So After rebuild I was using it for hours and hours and configuring, adding, cleaning, updating. All was good.
    I was restoring of some emails and system was loaded medium to high for a while.
    I went home thinking all was good and might connect via VPN and do some work and monitor it all, The vpn disconnected after a few minutes.
    I called their office and asked is all normal?
    They said network shares and emails have stopped. I confirmed this as the network would do the same thing it was doing before the rebuild.
    So I restarted the server and Internet/Network drops within minutes of being restarted. tried many things to solve this..
    hours later I installed known hotfixes, updated drivers, and tried so many other things to try and solve this...
    I had heaps of Event ID errors before the rebuild, and trying to ping anyone was resulting in General Errors, and cannot ping basically
    After the rebuild it has same sorts of event id errors. I had same general errors when trying to ping.
    In the end at 2am 2 weeks ago, I finally got it running smoother..
    I did 2 things which have made the network last longer then few minutes...
    1. Disabled the Network Port 1 and Enabled the 2nd Port. (Both On board FYI)
    2. Changed DNS in the TCPIPv4 from 127.0.0.1 to (192.168.1.253 (Servers IP))
    Since this change, I no longer get event ID errors.
    When network stops working the network icon stays normal.
    And network is lasting days rather then hours.
    Things I've spoken to others about,
    - 127.0.0.1 and changing to 192.168.1.253 these 2 are basically the same both being loopback to server. They both point to itself..
    - The fact the problems reappeared after a rebuild points towards hardware
    - I think the summer heat might have cooked the NIC :p as same day the server crapped itself my clients home wifi setup also died. The range extender died! weird coincidence
    - So I am seriously thinking it cannot be the DNS IP Configuration setting, I know that running all roles on a single server is hard for a server. But I find it hard to believe it was the DNS which caused this error
    I have continued to work on this issue through the weeks.,
    The following information is newest
    28th March,
    After 2 days of sweet operation.. IE Just after the switch to 2nd port.
    The server's network went down.., 
    I can ping only 127.0.0.1 or 192.168.1.253 ok
    but ping gateway or workstations times out.
    Netstat shows heaps of ipv6 and very few ipv4 addresses
    I restarted the server, applying computer settings sat there for a while..
    dunno if it was coincidence or not but unplugging the Gateway and replugging it made the CTRL-ALT-DEL come up right away.
    after boot everything has been ok for 14 hours now...
    Now the Network Ports (2 of them are on the server, most likely sharing controller)
    Please take a look at my ping/netstat and please make any comments.
    ----- Ping.txt -----
    Microsoft Windows [Version 6.1.7601]
    Copyright © 2009 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>ping 192.168.1.1
    Pinging 192.168.1.1 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
    C:\Users\Administrator>ping 192.168.1.253
    Pinging 192.168.1.253 with 32 bytes of data:
    Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
    Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
    Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
    Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.1.253:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Users\Administrator>ping 127.0.0.1
    Pinging 127.0.0.1 with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Users\Administrator>ping google.com
    Ping request could not find host google.com. Please check the name and try again
    C:\Users\Administrator>netstat
    Active Connections
    Proto Local Address Foreign Address State
    TCP 192.168.1.125:6008 192.168.1.118:49683 ESTABLISHED
    TCP 192.168.1.253:6008 192.168.1.120:55103 ESTABLISHED
    TCP 192.168.1.253:6008 192.168.1.121:49703 ESTABLISHED
    TCP 192.168.1.253:6674 WORK-SERVER:19928 TIME_WAIT
    TCP 192.168.1.253:19928 WORK-SERVER:6674 TIME_WAIT
    TCP [::1]:389 WORK-SERVER:6012 ESTABLISHED
    TCP [::1]:389 WORK-SERVER:6013 ESTABLISHED
    TCP [::1]:389 WORK-SERVER:36939 ESTABLISHED
    TCP [::1]:6012 WORK-SERVER:ldap ESTABLISHED
    TCP [::1]:6013 WORK-SERVER:ldap ESTABLISHED
    TCP [::1]:36939 WORK-SERVER:ldap ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:19932 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:32574 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35314 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35353 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:56321 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:64583 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6684 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6685 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6686 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6687 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6689 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6692 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6694 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6712 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6765 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17256 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17327 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19074 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19075 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19077 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19896 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19902 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:24754 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36936 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36944 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36946 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:41165 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56317 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56319 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59239 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59243 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59244 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59245 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59258 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59262 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59263 ESTABLISHED
    TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59327
    A HEAP MORE IPv6 but msg too long
    I have noticed currently using the Cisco Gigabit switch the network will last 24-48 hours.
    3th April
    I have tested a 10/100 16port netgear and the network lasted for 5+ Days.
    8th April
    I noticed network and sharing centre icon has no exclaimation mark looked normal.. so on server I tried to open google website.
    Nothing....
    I pinged loopback. was ok
    Ping the modem and not ok.
    So I restarted the adsl modem. Within a minute server resumed internet..
    I am unsure if the router caused this dropout. And my thinking spans now using a maximum speed of 100mbps it has taken 5 days to drop. WHY is this?
    Either the modem is causing this. Or its the server nic running at only 100mbps
    Does it make any sence?
    Can a nic on server cause a drop only to restart the gateway to make it startup again.
    From my post do you think the port on the gateway is flaky? As you said maybe too much for it to handle.
    The modem has 4 lan ports.
    Would it make sence to connect more than 1 lan cable from switch to modem?
    Thankyou
    Cheers

    Make sure you have the latest ROM bios and proliant support pack.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3948599&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4064%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
    Install the rom bios, then easiest to boot the HP smartstart to prepare for operating system deployment, then install the complete PSP next.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

  • How do i set a peer to peer network between my iMac and windows machines?

    I want to set up a peer to peer network between my iMac and Windows based computers in my house.  I also want it to a wireless set up.  Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

    I'm trying to connect my MacBook Pro to Wifi using internet sharing
    Why?
    Just connect the MacBook to the same internet as your iMac.
    MacBook > Wi-Fi router > Internet.
    You are connected to the internet with your iMac.
    iMac > Wi-Fi router > Internet
    Why do you want to go MacBook (via Wi-Fi)  > iMac > Wi-Fi router > Internet?

  • Trying to connect my iPhone 4 to a blue tooth network on my iMac, and can't do - can  anyone help please?

    trying to connect my iPhone 4 to a blue tooth network on my iMac, and can't do - can  anyone help please?

    What are you trying to accomplish?
    You can only connect your phone to your MAC for tethering only.

  • Network dropping with WRT54GS

    The network drops 3-4 times daily.  Got this router, as an upgrade from the B, about 2 months ago. 
    The only way to get the network back is to unplug all cables, pull the power, let it reset, then do a repair on the Local area Connection.
    I am securing it with a WEP key, it has a SSID, other than that if you can help me I can give more information.
    It drops for all three computers on the network.  The desktop is physically connected, and the two laptops are wirelessly connected.
    Please help this extremely frustrating.
    Dwayne
    EDIT --> it's version 6
    Message Edited by dwharmsway on 05-29-200710:16 AM

    I'm having the same problem on my end.
    This has been a problem with Linksys routers for some years now. First one I had back in 2002/2003 had the same problems and they never were resolved.
    It shocks me that they still suffer from this. I have not used routers for the last 3 years and when I decided to get one I went for Linksys because I like their interfaces. I figured they had fixed that problem from back then.
    Seems they haven't as I have to unplug my cables at random intervals for the network to work again.
    It just dies without any warning, kills the internet connection and the network in general.
    Seems I will have to return this junk and get myself another kind of wireless router. I am using version 6 of it btw.
    Any suggestions that won't ruin me?
    Message Edited by jobs on 05-31-200706:50 AM
    Message Edited by jobs on 05-31-200706:50 AM

  • I'm in the process of creating a WiFi network from my IMac to my LG HDTV.  I am incorporating a LG WiFi capable Blu-ray player and will purchase an Apple Express or Apple Extreme router. I need some advise on using this aquipment.

    I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

    I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

  • Accessing Citrix network with Intel iMac

    Has anyone had any luck accessing a Citrix network with their Mac? I followed the directions provided by IT, downloaded the Citrix software, but cannot access the office network, which is Windows and PC-based. Will I have any more luck if I load Windows onto my iMac? Or will I just have to keep using my Dell laptop to access email at work? I telecommute 3 days a week so I need to be in touch with the office.

    It works fine for me. In fact, I was just doing it a few minutes ago from home on my iMac. All the apps I use via Citrix are on a Windows 2008 server. What exactly happens when you try to access your Citrix network via your iMac?

  • Hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    Hi James and welcome.....
    Try the help here for Windows 7.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Carolyn

  • Air Drop on iMac

    How do you turn on Air Drop on iMac?

    Please click http://support.apple.com/kb/ht4783 for instructions.

  • AirPort network dropping connection at least twice a day

    I'm running an AirPort network and guest network version 7.6.4 - Time Capsule serves as my router, extreme and express as my extenders.  At least twice a week, my AirPort Network drops wi-fi connectivity.  It's annoying and frustrating as often I'm using a VIOP line for work conference calling and or using web meeting services.  The wi-fi droppage requires me to un/re plug the time capsule - the only fix I've found.  Doing this corrects the issue until the next drop.  Usually a couple of days...
    Is there a permanent fix I can use that I don't know about?  I was under the impression my AirPort Network "would just work"

    Since the Thunderbolt Display has been released I have seen this issue on literally hundreds of display/laptop combinations. With and without the extension cable. I have not found any logic around the issue, trying different usb/thunderbolt ports, different sleep settings, power settings. This is a legitmate issue that should be addressed and Apple is not addressing it -- or can't address it. BTW-There is NO reason to engineer a product with an extension cable needed to operate the peripheral. The only way to solve this is to burn a USB port on your laptop. I am fairly certain the issue is power related over the Thunderbolt bus. However, I have also experienced issues with USB3 hubs on macs. So maybe it is a larger power issue.
    Anyway, an Apple wired keyboard should just work out of the box.

  • O2 network dropping out

    Is anyone else having problems with the o2 network dropping off regularly from their i-phone? I have spoken to o2 and they say i have to send the phone back to apple!
    Someone has just told me that you can download a repair??? Does anyone know anything about it? Help I'm due to leave the country next week and dont have time to send my phone away and get it back before I leave.

    tb64,
    You can try updating to iPhone firmware 1.1.4 to see if it helps resolve your issue if you haven't already.
    Connect your iPhone to your computer, open iTunes and click "Check for Update".
    Hope this helps,
    Nathan C.

  • Edge network dropping

    I have had my phone for a few months and it has worked great. I recently completed the 1.1.3 update and now have had the edge network drop twice. I have to power down to get it to be recognized. Has anyone else experiences this issue?

    Well firstly I would update to 1.1.4. Secondly, I often find that turning Airplane mode on and then off again re-established EDGE if it's been lost. My guess is that this is a carrier issue rather than the iPhone.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

Maybe you are looking for

  • Will not boot to the damn bios!!!

    Ok.. I have the following in my sytem AMD Athlon 64 3200+ 2X 512 OCZ PC 3200 K8T NEO FIS2R 1 SATA Maxtor 80gig hd 1 lite-on 52x cd-r 1 sony floppy drive 400 watt clever power psu 64 nvidia g-force2 mx Now, here  is the promblem. when  I start the com

  • Mail-enabled Public Folders not showing as enabled in PFMC or EMS

    Good morning I have some PF's that are mail enabled, but running the Get-PublicFolder cmdlet shows "mailenabled" attribute as False. Also, in the PF Management Console, the folder shows as not mail enabled (with an option to enable it). I found this

  • Do I need to get an ID theft protection subscription?

    I'm new at this so please excuse my ignorance. Because I do virtually all of my banking, bill paying, and shopping online, I'm worried about ID theft. I checked out a couple of them and they are not compatible with mac. I know I don't need anti-virus

  • Exporting SQL results in Excel format

    exec master..xp_cmdshell'bcp "select * from [db name].[table name]" queryout D:\testing1.xls -o "D:\querycommanddetails.txt" -T -c -C RAW' I'm running above query on my local machine but System is showing output as 'NULL'.Can anybody help?

  • My lightroom navigation bar is not showing up. How do I get it back?

    My lightroom navigation bar at the top is not showing up. How do I get it back?