Network Environment diadem list of network client

It is possible to get list of network clients through vbscript in Diadem?
Is accessible in Diadem Navigator network environment?
Thanks,
Yustas
Solved!
Go to Solution.

Hi Yustas,
Great, that makes sense now.  You can not add a DNS name (\\ComputerName\...)  to the list of "grey" folders listed under the "My Computer" node in the tree view of the NAVIGATOR.  Any external folders officially mapped by Windows such that they have a drive letter (T: or Z will automatically show up in the list of "grey" folders.
You can add a DNS path to a folder when you create a new "yellow" Search Area under the "Search Areas" node in the tree view of the NAVIGATOR.  My recommendation would be to add any folders you want to load data from on these remote computers as Search Areas.  This will also give you the ability to look inside those data files without loading them and easily load selected channels, get curve previews, etc.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • Network clients can't log in some days...

    but can on others!
    Since upgrading to Mavericks and Server 3 I have an issue with local network clients not being able to log in to their accounts some days but can on others (yesterday was fine, today a problem again).
    It seems that quite a few people are experiencing similar issues but I can't find a solution I am confident to try out or that replicates my situation.
    Before you tart throwing techincal advice at me, I am not a networking expert nor a Mac genius, so please make your explanations clear and simple. Thank you.
    I have tried rebooting the server and clients, no success (today - although three days ago that did work);
    I have 'unbound' and re bound the clients (which worked four days ago, but not today - they are still showing green light);
    I have verified the disk permissions on the server (there were a few errors all bar one are corrected).
    Any other (simple) suggestions? Even if it is just things to check and to post more info here to help diagose the problem.
    Many thanks in advacne.

    I'll try to keep this simple, but network troubleshooting sometimes... isn't.   This reply will also probably get a little wordy. 
    There are three parts here...
    First, ask the server about its own local network and DNS configuration.   Functional networking and proper local DNS being fundamental to how servers work, and how servers can authenticate with your remote clients.  To do this, launch Terminal.app from Applications > Utilities and issue the following harmless, non-destructive, diagnostic command — this command will spot most of the issues that can arise with local networking and local DNS:
    sudo changeip -checkhostname
    The sudo will require entry of an administrative password.  There may be a one-time warning displayed about the perils of using sudo.  The command will then display some local network configuration output (including the IP address of the server), and finally an indication that either no changes are needed, or that there are network or configuration or DNS errors.   If changes are required, post the output.  (If you want or need to obfuscate, please do so consistently here, and please switch the domain part of your host names to "example.com", "example.net" or "example.org".)
    Second... On the client systems, launch System Preferences via  > System Preferences..., select Network, select the network connection (WiFi or Ethernet, most likely) that you are using, then select Advanced..., then select DNS, then confirm that the clients are referencing only the IP address of your local OS X Server or whatever DNS server you are using on your local network, and that your client systems are not referencing any ISP DNS servers, Google DNS servers, nor any other DNS servers that are not on your local network.
    Third... Please also describe your network configuration in just a little detail.   For instance: are you using an all-wired Ethernet network, or are you using WiFi, or some combination of WiFi and wired networking?   Are you using a firewall?  Any network switches?  Do you have more than one switch? 
    If you are using WiFi for your connections, are you located in an area where there may be nearby WiFi networks?

  • VPN Problem: Can't route to other network clients

    Hi,
    I can't ping the other clients on the network when I'm connected to VPN from outside.
    But accessing internet trough VPN works. (Sending all data through VPN).
    So in fact, I can only ping the VPN server I'm connected to.
    Maybe someone here has an idea what I'm doing wrong here.
    Here is my setup:
    internet
    I
    I
    Airport Extreme (internal IP 192.168.3.1, Router with NAT Port forwarding to 192.168.3.3)
    I
    I
    Switch----macMini (192.168.3.3, OS X Server 10.4.10 with VPN, DHCP, DNS, NAT enabled)
    l
    l
    Other Clients on the Network (Clients have DNS entry 192.168.3.3 192.168.3.1, Router is 192.168.3.1)
    The services DHCP, DNS working well for internal clients.
    Has someone an idea?
    Thanks a lot.
    Alex
    Message was edited by: Syndrome

    First, ping is ICMP traffic, different from other kinds of (eg, TCP) traffic like AFP.
    See http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/productstechnote09186a00800a6057.shtml
    traceroute also uses some ICMP traffic but might also be using UDP, see
    http://en.wikipedia.org/wiki/Traceroute
    http://www.linuxplanet.com/linuxplanet/tutorials/6524/1/
    However, in testing, I can indeed ping the server, when I connect to a remote Mac OS X Server via the Mac OS X supplied vpn. But there is no AP Extreme in the path. So the two big factors are: limitations and/or configuration of the AP, and firewall settings for each/any machine involved.
    The Airport Extreme is really quite limited, compared to any more full-featured routing device - in terms of just how granular you can be with controlling traffic flow.
    (As a total aside, I'd recommend investing in something like a Zyxel Zywall 2 Plus (or similar or better) and running the AP in bridge mode for wireless clients.)
    When you've connected via VPN, please run
    netstat -rn to see what your default gateway is, that's actually being used.
    Finally, what led you to try these tests ? What other problems are you having, what primary issue(s) are you trying to solve ?

  • Can't copy files to network client's folders

    We just switched from ARD 2.0 to ARD 3.0. ARD 3.0 is a great product - if it works. I can only copy files to ARD-clients, if I copy to the local hard disk, i. e. if it is a local client or if it is a network client and I copy to the top level of the volume. But if I copy files to the network client's desktop it doesn't work. I think the reason is that the network client's desktop is located on the server and not on the local hard disk.
    The same problem occurs if I use the new feature to copy files from or to a client using drag-and-drop with the observe window. It works with the client's local hard disk, but not with folders located on the server. This time there is no error message, but the message "waiting" - and the waiting never terminates.
    Has anybody a helping idea? Thanks!
    Greetings from the country of the football (soccer!) world cup!
    Horst

    I had the same problem, but I managed to fix it.
    In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
    I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

  • Connect as sysdba from network(client)

    when i connect to oracle database on network (client)
    as sysdba then it will gives error
    but when same command is issue on server then it will connect to oracle with no error
    :-on network machine
    SQL> CONNECT SYS/CHANGE_ON_INSTALL@SAFEDB AS SYSDBA
    ERROR:
    ORA-01031: insufficient privileges
    Warning: You are no longer connected to ORACLE.
    init.ora file
    remote_login_passwordfile EXCLUSIVE
    and
    SQL> select * from V_$PWFILE_USERS ;
    USERNAME SYSDB SYSOP
    INTERNAL TRUE TRUE
    SYS TRUE TRUE
    whats the problem??

    recreate your passwordfile in order to ensure that it is not shared and try.
    Joel P�rez

  • Unable to set the ip address for hosted network client after creating WIFI hotspot

    Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
    HI all
    I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
    so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
    but the problem I am facing is slight different
    I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
    when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
    but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
    as soon as I close the window, the ip address also disappears
    when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
    when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
    so what cause the failure in internet connectivity but success in hotspot connectivity?
    check the screen shots...
    can u help me..
    its little complicated

    Hi,
    Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
    If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
    Roger Lu
    TechNet Community Support

  • Social Networking Client

    Hi guys, i'm getting a message from the nokia store that nokia social v1.5 is not available for the nokia e6 belle. has anyone been able to update to that new version??

    stephen17033 wrote:
    I re-installed belle and also have lost the network client.can not download it from anywhere which is a shame because I thought it was good.
    Try here
    Here  

  • Network Client Authentication

    Hi all
    I am trying to get Network Client Username. All client users have Network Username.
    I am would like to read the Username based on their Windows Network login. Using the username, want to validate with Database.
    Could you please let me know how to get Network Client username?
    Thanks in advance.
    Karthik

    Creating a package is relatively easy, so I think you should just try it to see how far you'll get. sssd doesn't seem to difficult to install, so creating a PKGBUILD should not be to hard. If you encounter any problems, post them here so we can help you out

  • HT1178 Can I just use my airport express as the primary base station and the time capsule as the network client?

    I bought a new airport time capsule 3tb to be used to save to file all my pictures. Can I use it as network client and the airport express as the
    Primary base station?

    To my opinion this looks a bit like what I'm looking for.
    At the moment I have an Imac that is wireless connected to a 2TB time capsule (TC1).
    To this time capsule I have another 2TB time capsule (TC2) connected via a upt wire connection.
    At the moment there is a backup made via time machine from the Imac to the time capsule TC1 (the second TC is not used)
    I'm not so technical so I hope you understand the configuration.
    What do I want to achieve :
    copy all my data from the Imac to TC1 so that the information can be accessed by more users.
    create an automatic backup from TC1 to TC2 (mirror or raid system) for security.
    give access to some users on the network to access TC1 to read and write data.
    TC2 only serves as backup from TC1 and no direct access is needed to this disk.
    If there is a solution, thanks for explaining it in 'IT kindergarden style' so that I can understand and use the info.
    Many thanks in advance.

  • WMS 2012 and Touchscreen Support over Network Clients

    Hi all,
    I recently setup some virtual machines to operate with Dell Wyse E02 network clients. I purchased touch screen monitors to go with the zero clients, thinking that the E02's USB input would recognize the monitor as a keyboard and mouse. Upon testing the scenario,
    I found that the touch screen capabilities do not work.
    Is there anyway to configure WMS so that touch screens may be used over virtual desktops & network clients?
    Thank you so much in advance for the help! 

    Hi,
    For the multipoint server issue, I recommend you can post in the dedicated Forum for more efficient support:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=windowsmultipointserver
    In addition, to install Windows MultiPoint Server 2012 Update Rollup 1, you can also download from here:
    Windows MultiPoint Server 2012 Update Rollup 1 (KB2791647)
    More detailed information about UR1, please refer to this article:
    Updating PCs and Virtual Desktops for Update Rollup 1 of Windows Multipoint Server 2012
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Social network client

    I'm using nokia 701 since the last two months. Just before a week there is a problem in my phone, the social network client is not running. When i'm opening the social application it was showing ”sorry, please uninstall the social and reinstall” also i cn't download it from anywhere else.

    So mine and friend too,nokia 206 asha.3 weeks ago it formated my facebook and whatsapp but then i upgraded them.Again it did but this time it Deleted Whatsapp and Notifications,I can't download it anywhere now it says 'SOMETHING WENT WRONG'..I need my whatsapp back,please help!

  • Social network client problem

    my nokiac6-01 is not working social network client when i open social network there is only unable to start .

    Uninstall social from settings>installations>already installed. Remove social, social install helper, social installer, Facebook widget, Facebook widget, homescreen summary widget, all activity widget. Fire up the software update app on your phone. You should get prompt for the new social. Download and install. Should work properly now.
    In Love With My C6-01:Now running on Nokia Belle!

  • Time capsule as a network client

    I previously had my time capsule (A1409) hard wired to an ethernet cable on my second floor with a printer attached to it.
    I now have a new Bell Fibe wireless modem suppling my TVs with a wireless signal from the main floor.
    Can I set up my time capsule as a network client and leave it up on the second floor with the printer? Does does the T.C. need to be hard wired with an ethernet cable to work? I would like to avoid moving the printer and capsule down to the main floor.

    It can be done but is highly not recommended.. The reason is you will actually cause the TC to become not just a network client.. but a totally dumb one.. No WAP function, no ethernet function. So backups to the hard disk will be slow as molasses in winter.
    You may as buy a cheap as chips wireless print share device.. or cheap old extreme or express.. why waste a TC to do the work of a $10 device.
    Setup TC to join wireless network.
    How do I setup my time capsule with wireless internet?
    The operation of the airport utility for this setup is highly unreliable.. it works once out of 5 goes.

  • HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

    how do you set the airport time capsule as the primary base station rather than as a network client?

    The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
    So, the first logical question here would be......
    What is the make and model number of the device that you call your "modem"?

  • All devices listed as wireless clients not showing up.

    I  have an airport extreme (newest version) I have my apple tv, computer and ipad showing up listed as wireless clients, however my iphone does not show up. It is connected to my network. I have tested with another iphone (same version 4S and same iOS) it shows up but not Mine.
    Do u know why it is not showing up?

    remove power cord from the PSU and >>Clear CMOS Guide<<
    if the wifi card is removable, try to reseat it
    also install latest killer drivers from:
    http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
    [try older version as well if needs]

Maybe you are looking for