Network error code

i'm trying to connect my nephew's ipod mini and download itunes. it appears to be downloading then it stops and gives me a network error code of %APPDATA%\. Does anyone have any idea how to override this. thank you

Hello nicolamcinroy,
And welcome to Apple Discussions!
Since you are referring to issues you are having with downloading iTunes, I would suggest posting this in the iTunes forum, which can be found below. You might have much better luck there.
http://discussions.apple.com/category.jspa?categoryID=149
B-rock

Similar Messages

  • How do I solve a network error, code 60?

    My ical on my imac desktop and I continue to receive a network error, code 60.  How do I solve this issue?

    Try the last post here by elkclub...
    https://discussions.apple.com/thread/2370776?start=0&tstart=0
    1. Open iCal on your client computer > Preferences
    2. Go to the Accounts tab
    3. Go to Server Settings tab
    4. Make sure there is a port number entered. It should match the port number being used by the iCal server. Originally, this setting was on "Auto" and it worked fine. The "Auto" option no longer works. Also, be sure to check "Use SSL" if you are doing so. (In my setup, I have it on port 8443, with SSL on.)

  • Unknown network error code -3212

    i recently messed with my nat type with my xbox and started messing with my network settings on my computer.  i cannot connect to the itunes store due to the fact of an unknown network error (code -3212).  I can connect to the internet via google chrome or safari though. need some help please!!

    Hello usmcalex904,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue where you're now unable to connect to the iTunes Store, please follow the steps in the articles below.  
    Can't connect to the iTunes Store - Apple Support
    iTunes: Advanced iTunes Store troubleshooting - Apple Support
    Take care,
    Alex H.

  • Network error (code 32)

    I am trying to publish a colleague's iCal calendar to our server over the network. Every is seemingly setup correctly, network connection is fully functional and admin login is correct.
    When I hit the publish button, I get an error message along the lines of 'iCal has encountered an unexpected network error (code 32).'
    Anyone know what this means? I've searched here and found nothing... Any help appreciated

    im sorry i cant help you with your (code 32) error but i do have a very similar error on my a single client iCal computer that gets network error code 60 when it trys to refresh or update from the server.
    i cant find what error code 60 means
    plz help

  • ICal Server Error "An unexpected network error (code 60)"

    When trying to create a new iCal calendar on our leopard server I get an exclamation mark next to the server in the left sidebar next to the name of the server. When I click on it I get "an unexpected network error (code 60)"
    Thanks

    After a lot of trial and error... this might help:
    1. Open iCal on your client computer > Preferences
    2. Go to the Accounts tab
    3. Go to Server Settings tab
    4. Make sure there is a port number entered. It should match the port number being used by the iCal server. Originally, this setting was on "Auto" and it worked fine. The "Auto" option no longer works. Also, be sure to check "Use SSL" if you are doing so. (In my setup, I have it on port 8443, with SSL on.)

  • High number of "Network error code 0x2746" in extended events log

    In the extended event log of our database server I see 880 consecutive identical errors, all occurring between
    17:00:49 and 17:15:25. The message is:
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 27 ms, enqueued 0 ms, network writes 0 ms, network
    reads 25 ms, establishing SSL 8 ms, negotiating SSPI 0 ms, validating login 0 ms, including user-defined login processing 0 ms. [CLIENT: 10.127.214.32]
    The timings in each message are a little bit different. It might be interesting to know the averages for these timings, so here is the message again, now with the timings replaced by averages (rounded to 1 digit):
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 32.5 ms, enqueued 0.5 ms, network writes 0.9 ms,
    network reads 29.4 ms, establishing SSL 8.3 ms, negotiating SSPI 0.0 ms, validating login 0.0 ms, including user-defined login processing 0.0 ms. [CLIENT: 10.127.214.32]
    The client is a Citrix server that runs a COTS program. It serves approx. 20 users.
    What can be the cause of this? Can it only be the program that automatically tries to reconnect?

    Hello,
    Please read about possible causes and resolutions on the following resource:
    http://technet.microsoft.com/en-us/library/ms187005(v=SQL.105).aspx
    Please examine any certificate used for communications. Maybe a certificate has expired.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Network error code 0x80070035

    Hello
    I have router Siemens SE555 with USB File server enabled and i have one disk connecetd on it. On Windows 7 when I wont to access to disk I get massage Windows cannot acecess \\NetworkDisk. I also have one PC with Windows Vista Business and one with Windows XP and both off them can access to that disk.
    I get code: Error code: 0X80070035 The network path was not found.
    Please if anyone can tell me what to do?
    Thanks

    Since you are able to see and access Computer 2 from Computer 1 and unable to see computer 2 from computer 1. I would suggest you to first check with both the computer if the Network discovery is turned on both the computer.
    To turn on network discovery
    1.Open Advanced sharing settings by clicking the Start button, and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, and then, in the left pane, click Change advanced sharing settings.
    2.Click the chevron to expand the current network profile.
    3.If network discovery is off, under Network discovery, click Turn on network discovery, and then click save changes. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    Also you may access the link and follow the steps and check if it helps to see the computer 2.
    http://windows.microsoft.com/en-us/windows7/Why-can-t-I-connect-to-other-computers
    Also you may verify if you can access computer 2 from computer 1 by opening with the run command and typing the IP address of computer 2.
    To do this, follow the steps in computer 1.
    1. Click on Start
    2. In the start search box type \\ipaddress\ of the computer 2 and press enter eg: \\192.168.0.2\
    Check if this opens and connects to Computer 2 in the network.
    Also you may try to boot both the computer in safe mode with networking and see if they are able to see each other.  To boot to the desktop in safe mode with networking keep tapping F8 key during restart. Once you see the option to boot in safe mode with
    networking select it and press enter.
    Access the link to know more about how to boot the computer in safe mode:
    http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  • ICal has encountered an unexpected network error (code 32)

    Hello all... I just wanted to let people know how I fixed the above-mentioned error (code 32):
    This has something to do with a Kereberos issue. Open Server Admin and under the iCal settings, uncheck the Kereberos settings. I know it isn't as secure, but at least you'll be able to update without "network errors". Also - make sure that your local settings are using any form to connect. So...
    Do not use Kereberos and it should resolve the issue.
    Hope this helps someone!
    -JD

    I am having the problem you described, but couldn't access the settings you spoke of. Is there any other ways to fix this problem. It just happens with one of my three calendars that I need to publish.
    Any help would be great. thank you

  • App world network error code 40820

    Hi i have issues with App world v3 with an error code 40820 which says they cant connect to the network server. I have tried all the resolutions possible in the support from blackberry but it still dosen't work.
    I can view apps to download but i cant access my world or complete downloads. Please help! facebook app had an error message of 100 whereby they couldnt contact server.
    I have deleted the facebook app v2 and now the App world v3 still doesn't work. Im using a bold 9900 os7.
    Help required urgently!

    several at http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB28188 - but none work for me (running OS 7.1 now!). 
    What does work for me is - turn off cellular and on WiFi - connect to an access point and no error. Don't forget to switch off wifi and on cellular when done!
    BTW. App world access problems happened for me (over cellular) with OS 7.0 OEM build on my Torch 9850. Then they (BB/VZW) pushed out a new build and the problem disapeared!!!  Not to leave well enough alone, BB/VZW just made the OS 7.1 available, so I installed it - voila! the problem has reappeared. My corporate help desk said there is nothing in our BES set up that could be blocking it that he can find, so I blame BB/VZW (and there seems no way to contact them re: the KB article to say "where is the fix for OS 7.1?"). 

  • ITunes Network Error Code (-9813)

    Well, I haven't seen this yet on the Forum... I've recently purchased a new Mac a
    2.16 GHz Intel Core 2 Duo iMac. I was fine for a while, not sure what happened... But I'm getting:
    iTunes could not connect to the iTunes Store.
    An unknown error occured (-9813)
    Make sure your network connection is active and try again.
    Now I also have a powerbook that I have no trouble conecting to the store and
    signing in... Can anyone help me with this?
    AppleCoreDesigner.

    It has nothing to do with your computer, I don't think so at least.
    A lot of people have had trouble connecting to the iTunes store. I cant connect, myself.
    Not sure why your powerbook can and ur iMac cant tho...sorry

  • ICal: an unexpected network error (code 60)

    Hi Can somebody explain how to solve this? I have this for over a week now, and all the previous advice I followed, but did not work. Your help is much appreciated.
    Kr. Eva

    After a lot of trial and error... this might help:
    1. Open iCal on your client computer > Preferences
    2. Go to the Accounts tab
    3. Go to Server Settings tab
    4. Make sure there is a port number entered. It should match the port number being used by the iCal server. Originally, this setting was on "Auto" and it worked fine. The "Auto" option no longer works. Also, be sure to check "Use SSL" if you are doing so. (In my setup, I have it on port 8443, with SSL on.)

  • HT201210 When I try to do a software upgrade from 4 to 6 on my ipad I get a Network error message.  i have full internet access. Any ideas?

    I am trying to upgrade my ipad ios 4 to IOS 6 or above. I  get a network error code saying the ipad upgrade server cannot be contacted. I do have full internet access on a high speed connection. Any suggestions?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • ICal error code 60

    My iCal is not syncing with iCloud - says unexpected network error code 60
    Any help gratefully received
    I have an iPhone 4 and Macbook Air and they are syncing fine, so the settings on the phone must be right for the .mac account.

    Hello, see if this helps...
    https://discussions.apple.com/thread/3772095?start=0&tstart=0

  • Error code: 0x80070035 The network path was not found

    "Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
    The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
    Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".  
    Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
    So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
    DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
    All strarted and running in Automactic mode.
    Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
    Someone please help !

    Hi,
    In addition, I would like to suggest the following:
    Enable NetBIOS over TCP/IP:
    1.    Go to “Control Panel\Network and Internet\Network Connections”.
    2.    Right-Click on the connection and choose Properties.
    3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.    Click Properties, and then click Advanced.
    5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Thanks.
    Nicholas Li - MSFT

  • Lenovo 3000 N100 Network issue / Wireless Stack initializa​tion failed, error code 117

    Hi,
    Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
    After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
    This is what I've done so far:
    1) Checked Radio switch ---> on
    2) FN +F5 --> connection on
    3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
    4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
    Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
    Diagnose Tool gives the following output:
    "Wireless Stack initialization failed, error code 117"
    Logfile:
    Description : Intel(R) PRO/Wireless 3945ABG Network Connection
    Type : Wireless LAN Adapter
    DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
    PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
    SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
    ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing! 
    Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
    Thanks much in advance for any advice you might have.
    Flo

    Hi
    I have this problem also with my Lenovo 3000 V200.
    Sometimes when I boot up the PC it will connect to the network and everything works just fine.
    At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
    and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
    If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
    access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
    the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
    to get networking up.
    I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
    at seemingly random instances in time. This is obviosly a problem with the Access Connections software
    since the Wireless networking works fine when I let windows manage it...
    Anyone with a fix?
    /Fredrik

Maybe you are looking for