Network error during installation of Itunes.

hey
I am try install Itunes, but it comes with "network failure with Itunes.MSI".
Also If i try to open itunes on its own it ask for it and browse to it. Then it say that it is invalid.
What am i doing wrong? Please help me.

With that one, download and install the Windows Installer CleanUp utility from Microsoft:
http://support.microsoft.com/kb/290301
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC, and try another iTunes install. Does it go through properly this time?

Similar Messages

  • I got an "Apple mobile Device' failed to start error during installation and itunes won't install.

    For some reason I got an error message trying to update itunes on my Vista PC and for some reason could not run itunes. I uninstalled itunes completely and tried to download a new installation. Near the end of the installation I got this error message. "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I was given the choices of 'cancel', 'retry', and 'abort'. I tried 'retry' and got the same error again. I tried 'abort' and the installation eventually ended in another error and suggested that I reinstall itunes.  I was in the administrator's account when I attempted all these things.Has anyone had a similar problem or knows how to get the installation completed?? Thanks for any help.

    Hello smittylin,
    The following articles provides steps that can help get iTunes back up and running.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • Error during installation of itunes

    when i try to inwtall itunes on my computer an error message pops up saying "error 1327. invalid drive: h:\" but i don't even have a drive named h on my compter, my cd rom drive is e.

    hi anne!
    the admin privileges business can be tricky, so it's still worth explicitly checking up on. be careful to have your antispyware turned off too (especially if you're using MS Antispyware). Also go for a sweep through windows update to just make sure that you're fully up-to-date in that regard.
    let's also try the Installshield Tips and Pointers on installation best practices:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Apple Mobile Device Failed to Start error during installation of iTunes

    In an attempt to update my iTunes to the latest version, as prompted by a pop-up, the update failed.  I then tried to open iTunes from my desktop but a pop-up displayed that the program wasn't working properly and that I should re-install iTunes.  I removed the program and then attempted to re-install.  Midway through the install, I receive an error message that "Services "Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
    I can either Abort, Retry, or Cancel...none of which completes the install.
    Help.

    Chaps and chapesses,
    I too was having the same problem when I tried to update and then unfortunately uninstall and re-install itunes. But, like Nige above me says, you need to uninstall all your Apple software and then re-install itunes.
    Have a look at the response given to this forum post:
    https://discussions.apple.com/thread/5819470?tstart=0
    I did exactly as the turingtest2 said:
    I removed all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Then I restarted my computer, and the install of itunes worked like a dream. None of this ignore, abort, cancel nonsense.
    Hopefully all your respective versions of itunes will work soon. Cheers Nigel280

  • I get a network error during installation

    Cannot read file C:\windows\installer\AppleSoftwareUpdate.msi

    Hmm. Sorry I must not be making my question clear. I've already downloaded and run the setup package. All of the software is already installed.
    I'm having trouble establishing a wireless connection to the printer. When I try to do that I get this:
    Any ideas on what to do here? The driver file doesn't exist in any of the Windows directories I was directed to look in.
    In fact, I don't even know if it should be in any of those directories. The advice I was following there was with regard to a Windows XP issue. And I'm on Windows 8.1.

  • Itunes: Fatal Error During Installation (it wont download at all) HELP!

    Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
    +*Preparing to install...*+
    Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
    Then another window pops up saying:
    *+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
    *+Verify that you have access to that directory.+*
    and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
    so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
    *+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    +*Verify that you have access to that directory.*+
    Then after this i went to the folder
    +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
    WHAT DO I DO?!?!? please can someone help me
    The details for my computer are:
    Microsoft Windows XP
    Professional Version 2002
    Service Pack 2

    if it helps at all...
    I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
    and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
    ...is there any possible way that anybody can help me out with this.
    any help that anyone can offer is very greatly appreciated,
    Please & Thank You.

  • I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

    I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Why do I keep getting an error message saying "error occured during installation before iTunes could be configured"

    I am trying to install iTunes on my computer and everytime I do it says
    "error occured during installation before iTunes could be configured. Your system has not been modified" how do I fix this?

    Hi,
    Maybe the radio connection on the other end is not working. Hope this helps.
    xxmitchxx90

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.  Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

    During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. 
    "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'".  This is all followed by some more text and code HRESULT:0x80070005   
    Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
    Anne Marie

    Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

  • Itunes 7.6 installation Fatal Error during installation

    I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

    I found on another post that concerns this same topic that someone has responded with the following solution:
    I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
    If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
    Here is how I corrected it:
    1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
    2) Open a user that has administrative access -- I used the one user that has access to itunes.
    3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
    4) Go to the Security Tab
    5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
    6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
    7) Give that user full access to the Program File by putting a check mark in the Full Access box.
    8) Repeat for the remaining users.
    9) Restart computer in normal mode.
    10) Go into a user that had problems and click the itunes icon, and it should run.
    It worked for me, I hope it works for you.
    I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

  • Itunes: Fatal Error During Installation

    Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted and when I tried to open up iTunes(after restarting), a little window came up saying:
    +Preparing to install...+
    Then after a minute or two it said: +Please wait while Windows configures iTunes+
    Then another window pops up saying:
    +*Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. *+
    +*Verify that you have access to that directory.*+
    and I have no idea what that means so i closed it then a pop up shows saying: +Fatal Error During Installation.+
    WHAT DO I DO?!?!? please help me
    The details for my computer are:
    Microsoft Windows XP
    Professional Version 2002
    Service Pack 2

    Try first going through this article to remove iTunes and Quicktime completely (http://docs.info.apple.com/article.html?artnum=93698).
    After you remove everything, don't re-install yet. Download the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301). After insalling that, remove any references of iTunes, Apple, or Quicktime in the list.
    Try re-installing now.

  • Errors occured during installation before itunes could be modified.... run the installer again

    Itunes says I need a version 10.7 or higher for my iphone 5 so when I go to upgrade/install the latest from the website I keep getting a message "errors occured during installation before itunes could be modified.... run the installer again" any ideas?

    iTunes doesn't yet provide support for Windows 8. Some can get it installed others not.
    tt2

  • Errors occurred during installation before itunes could be configured

    i can't  install ITunes in my win 7 it replay by errors occurred during installation before itunes could be configured

    Hi there Goodie58,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W.

  • Errors occured during installation of itunes 11.1

    I am receiving this message, errors occurred during installation before itunes coule be configured when trying to install itunes 11.1. Can anyone help?
    I'm using Windows 7 64bit.

    I got this same error message for installing Itunes 11.4  64bit
    I was able to get Itunes installed when I followed this advice here http://superuser.com/questions/169834/cant-run-windows-7-installer-error-reading -from-file Looks like admin did not have access rights to the C:\Users\username\AppData\Local\Temp directory. I added SYSTEM and Administrator to full access and then it installed properly
    Had the same problem, installer couldn’t read from %temp%\folder\installer.msi
    (%temp%=C:\Users\username\AppData\Local\Temp). Added full rights for user SYSTEM on %temp% folder and installer ran just fine

Maybe you are looking for

  • To Load ALV Layout in report selection screen

    Hi... I want the selection screen option for user so that he can select any of the saved layouts. I have done some coding after refering to some threads in here.But I can't proceed further...plz help <b>selection screen</b> SELECTION-SCREEN BEGIN OF

  • How to find the date on which notification task has been released?

    Hi All, I am an ABAPer, I have a functional doubt. I have got a functional Spec's for which I have to create a report. Here, I need to retrieve the field for "Date when the notification RECV task has been released". I have checked and analysed that t

  • Can I have a role inheriting another role in weblogic 9?

    I have two global roles: AppUser and AppAdmin. An AppAdmin is an AppUser. Is it possible to configure this fact in weblogic 9? Here is what I tried. I added AppUser and AppAdmin as global roles using the wl9 console. Then I tried to add a condition o

  • How to Use Less Data on the Iphone 5, Thanks

    Hi, I just got a Iphone 5 a few weeks ago and i was wondering how do I use less data. I already went over my data plan, I dont stream music or movies or anything i check my emails, go on facebook a few times a day and pinterest. thanks for your help.

  • Samples not recognised when opening saved EXS Instrument

    Whenever I create a new ESX instrument and save it, it doesn't recognise the samples when I open it again. I can see the samples listed when I go into the EDIT screen. I can see them all mapped to individual keys. But the instrument just plays the de