Network error since moving Essbase server into new VLAN

We just moved a Solaris zone containing an Essbase server into another VLAN and now I am seeing strange problems with network timeouts. When EAS runs "query database" commands in MAXL (when you click on a database, for example), it can hang for ten minutes and then timeout. If I run this locally on the server via essmsh:
MAXL> query database <Db> get estimated size;
I get, after ten minutes:
ERROR - 1056213 - message from server [Network error [145]: Unable to connect to [chr7z037:1423]. The client timed out waiting to connect to Analytic Services Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct].
THe server isn't down and I can connect to it via EAS and HSS.
I am not sure what service is reporting this error - must be APS or HSS (which run on a seperate windows box)?
Also EAS data previews are painfully slow and/or timeout with the same network error as above.
The essbase server is in HSS mode.

Hi Philip,
As CL said ,even I had faced the similar issue. In our case , it was the concept of DMZ ( they were in 2 different DMZ's ) and not able to communicate and gave the error ( which you mentioned in your post).
Try to open up the ports ( Try to telnet also to check)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

ITunes wifi sync doesn't work since moving Mac to a new Airport

Hi,
I recently moved my Mac mini which acts as an iTunes 'server' for all the other devices/computers that I have at home from being Ethernet connected to the airport base station in the middle of my network (the Time Capsule described below) to the Airport Extreme at the end of my network. Since moving this, all my devices continue to show in iTunes but if I try and initiate a wifi sync it spends 10 to 20 seconds trying to find the device and then fails (the device then shows "Sync will restart when mini becomes available" or similar). If I completely reboot all my airport base stations it seems to start working for a while. For info, I have tried disabling the Mac mini firewall but it has no impact. Sync works perfectly with a cable and used to work pretty well (but not 100% of the time) before I moved the Mac mini.
Any help or ideas would be really appreciated, my network layout is described below:
My network cosiest of a Sky TV broadband ADSL model & wifi router which provides internet and DHCP using 802.11b/g.
Connected to that via a long Ethernet cable I have a latest gen. Airport Express in a different part of the house creating a 2.4Ghz 802.11n only network with 'Allow this network to be extended' checked.
I then have a 1st gen. Time Capsule extending that network and an Airport Extreme (not the latest version) which extends the network further. If I look at the iPad Airport Utility app I see this network as a long, straight line where each extends the previous.
I have all the Apple Airport devices in 'Bridge mode' so that the Sky device is providing DHCP for the entire network.
I have an old-ish Mac Mini (Intel single core) running a fully updated version of snow leopard (can't update to Lion on a single core) with the latest version of iTunes. I have several iOS 5 devices (fully updated).
Regards,
Phillip.

Just noticed a typo: I moved FROM plugged into the middle of the network to the END of the network and then plugged into that base stations ethernet.

HBR Error connecting to Essbase server

Hi,
Getting an error " HBR Error connecting to Essbase server" while selecting the outline in create new business rule.Tried the below workaround,but still getting the same error.
* Copy the HBRServer.properties from AAS (<HyperionHome\Hyperion\AdminServices) to the Planning Server
(<HyperionHome\Hyperion\HyperionPlanning\AppServer\InstalledApps\...)
* Restart the services.
* Login to Hyperion Planning application. Connect to each application at issue to establish RMI connection.
* Log into AAS, Refresh security from Shared Services
Any solution/ workaround could be of very helpful.

Hi,
Are you trying to create a business rule for planning or essbase, the error message you have posted is for trying to connect to essbase and you usually get that message if essbase is not started or unreachable.
Cheers
John
http://john-goodwin.blogspot.com

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

HBR running error (Urgent, please help) Error connecting to Essbase Server

Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
Eric

I am actively using the EAS, but the error is suddenly come that I think I am not logout by server

Cannot add a New Essbase server into the EAS Console

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Windows error when importing Essbase cube into OBIEE

Hi all:
This question is perhaps more relevant to the OBIEE forum, but I put it up there a few days ago and got no response. So now I'm hoping to get some help on this side of BI land!
My issue is that I'm trying to import an Essbase cube (system 11) into BI Admin Tool, but whenver I go to "Import from multidimensional" and hit "OK" after entering in the essbase server name and log/pwd, the BI Admin tool crashes. I get no error msg except for a couple of errors I see in the Windows event log:
1. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll
2. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
I'm running a standalone OBIEE 10.1.3.4 on my local machine (Windows 7 32-bit) and the Essbase Server is on a separate Windows 2008 machine. I can ping between machines and all ports are open on the Essbase machine, so I don't think this is a network related issue. Also, my OBI RPD is working fine in all other respects. I have other data sources working in there with no trouble. My Essbase server is also working fine. I also tried to do this in a new RPD in case the old one was corrupted, but get the same issue.
Any help would be greatly appreciated.
thanks,
Akshay

Akshay,
You must have the Essbase client installed on the same machine where your OBI Administration Tool is installed. This should get you past the error that you are receiving and should fix your problem. Since you are running 32-bit just download the 32-bit Essbase client from Oracle. You will most likely need to run download the required files to install the Essbase client and with Hyperion 11x you should be familiar with that required software matrix since you have Essbase running on a seperate server already.
But now looking at your post I see that you state that one of the paths in your error is C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll. The path C:\Oracle\Middleware is usually seen in Hyperion EPM 11.1.2. So, are you running Essbase 11.1.2 and OBIEE 10g or are you running OBIEE 11g? You'll need to specificy as OBIEE 11g can only interface with Hyperion Essbase 11.1.2 at present. And if I recall correctly the 11.1.2 Essbase client does not work with OBIEE 10g. Please clarify on these points.
Let me know if that helps fix your issue. If that doesn't fix it post back here and we see if we can keep you going forward.
Don't forget to reward points.
Cheers,
Christian
http://www.artofbi.com

Error while adding essbase server(V9.3.1)

Hi All,
I have installed all essbase related products and configured everything thru configuration utility successfully.But while adding essbase server through ADMINISTARTION SERVICES CONSOLE,I got the following error.
============================================>
Error: -1 com.essbase.eas.net.remote.RemoteStartException: Unable to connect to server LENOVO-91845925. Reason: Connection timed out: connect
The server might not be running.
LENOVO-91845925 com.essbase.eas.essbase.defs.ServerCommands.Connect July 27, 2008 9:32:06 PM PDT Failed : 1051293 Login fails due to invalid login credentials
Error: 1051293 Login fails due to invalid login credentials
Essbase Server: LENOVO-91845925 com.essbase.eas.essbase.defs.ServerCommands.Connect July 27, 2008 9:32:06 PM PDT
Error: 1051293: Login fails due to invalid login credentials ------------------------------------------------------------------------------------------------------->
I am sure that I am giving correct credentials as I did it couple of times.I just added the essbase server as LOCALHOST and username as ADMIN and password as PASSWORD and confirm password as PASSWORD.I am not sure where I am making mistake.or Do I need to configure anything after adding the ADMINISTARTION SERVER through CONSOLE.
Please let me know if you have any idea on this.
Thanks in Advance..

Hi Sandeep,
Yes,While configuring essbase server,it has asked me to provide userid and password twice.
First time:
By default it came with userid as hypuser.But i changed it to essadmin(This is the user which i have created in database specifcally for essbase).
Second Time:
After the above step is completed ,when i click next,It was asking the for userid.By default it came with admin.I left it as it is and provided password as password.
After this it took several mins to configure and finally came out successfully.
Now my doubt is that Do I need to provide essadmin(which i have given while configuring essbase server) while adding essbase server through CONSOLE?.
Thanks.

Moved report server to new machine with all old settings

Dear all,
I am going to moved to new server machine for SSRS and i have 200+ reports ,,
i have configure report server in new machine but reports configuration pending
i thought i would need help of others to do this because i have a quetion? that
How can moved my 200 reports to new machine with all configurations includes 40 subscriptions , and much more
with parameter values setting ??
is there simple way?? rather than doing one by one ..
like i just copy mu old report server to new report server..
Help me please ??
Dilip Patil..

Hi Dilip,
After testing the issue in my environment, we can try to use the RS.exe utility to execute a Reporting Services RSS script that copies content items and settings from one SQL Server Reporting Services report server to another report server.
To achieve this goal, please refer to the following steps:
using the RS.exe utility Download the script file from the CodePlex site
Reporting Services RS.exe script migrates content to a local folder, for example c:\rss\ssrs_migration.rss.
Open a command prompt with administrative privileges.
Navigate to the folder containing the ssrs_migration.rss file.
Run the following command to migrate contents from the native mode Sourceserver to the native mode Targetserver:
rs.exe -i ssrs_migration.rss -e Mgmt2010 -s
http://SourceServer/ReportServer -u Domain\User -p password -v ts="http://TargetServer/reportserver" -v tu="Domain\Userser" -v tp="password"
Besides, if the destination report server is SharePoint mode, we can also try to use Reporting Services Migration Tool to achieve your requirement. For more details, please see:
http://msdn.microsoft.com/en-us/library/dn600370.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Moving old backups into new air capsule

is it possible to set up an air capsule to inherit the backups that time machine made on an external USB hard drive? I'd hate to lose all the backups i have since 2011. Thanks

The problem here is that Time Machine stores backups differently on an external hard drive compared to a network drive like the Time Capsule. You will not be able to combine the backup files into a single file.
Life will be tons easier if you simply start new backups on the Time Capsule and keep the USB drive around for another 5-6 months until you have some backup history on the Time Capsule.
If you find that you don't really need to go back and look at backups that were made two years ago, you might want to consider erasing the USB drive at some point and using it as a general purpose drive....or a second Time Machine backup drive.
In other words, have Time Machine backup to both the Time Capsule and hard drive. The application will automatically alternate backups between the Time Capsule and hard drive. When....not if...one drive fails, you will have a solid backup history on the "other" drive.

Error During importing Transport Request into New Refreshed system

Dear Experts,
we have refreshed the Development BI system ( DB0 ) with DB1 which is
our New development system for Release 2 on Nov 5th ,2007. The
additional transports which went successfully to production till date
should to be manually moved to DB1.Some of the transports which are
involved ODS are getting failed with the below Error.
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
Activation of Objects with Type DataStore Object
Checking Objects with Type DataStore Object
Checking DataStore Object ZOTCODF3
DataStore object ZOTCODF3 is consistent
Saving Objects with Type DataStore Object
Internal Activation (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Change log for DataStore object "ZOTCODF3" saved successfully
Activate all Dictionary objects ( 5 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZOTCODF3
Creating Export DataSource and dependent Objects
The creation of the export DataSource failedReading the Metadata of ZOTCODF3 ...
Creating DataSource 8ZOTCODF3 ...
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)Error when creating the export DataSource and dependent ObjectsCompare active / modified versions for DataStore object &2
Update/activation program for DataStore object ZOTCODF3 is being regenerated
Error when activating DataStore Object ZOTCODF3
Resetting of Incorrect Objects Back to the Active Version (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Versioning not possible for PSA 8ZOTCODF3_CA
Error while saving change log for DataStore object ZOTCODF3
When i tried to reimport, DDIC is getting locked.we havent changed DDIC
password as we confirmed logging with the password we have.
we are on Stack 11. Please help us in resolving the issue at the
earliest.
Regards
Ravi Patneedi

Hi,
Ask Basis people, to check myself datamart RFC login through SM59 via background user(ALEREMOTE). Issue related with Initial password .
Regards,
Saran

Error while starting Essbase Server

Hi,
I installed essbase analytic server version 9.2.0. When I starting the server it is giving the following error:
"essbase.exe - Entry Point Not Found
The procedure entry point eSSWrite could not be located in the dynamic link library ESSAPINU.dll".
Earlier also I got the same problem, but i got resolved when i reinstalled the server.
This time it is not working even after reinstallation.
Can any one tell me why i am getting this error?
Thanks in advance
Message was edited by:
Naveen Suram

I would check to see if there are duplicate versions of the Essbase dlls anywhere on your system. If, for example, some of those files got installed to your system directory (perhaps by a previous/rogue install), you may have mismatched versions of dlls running and even a reinstall won't fix it.
If you are running windows, one useful tool is the sysinternals process explorer which will show you the dlls loaded, where they are loaded from and their versions. Sysinternals was acquired by Microsoft a few years ago and their tools are now available directly from the Microsoft website; www.sysinternals.com should redirect you to the proper place.
Tim Tow
Oracle ACE
Applied OLAP, Inc

Final Cut Error when moving .mp4 clip into sequence

I attempted to move an .mp4 clip into the sequence and it says "General Error" before Final Cut Pro Force closes itself. In the error details it says something about a thread error whatever that means. It will play fine in the Quicktime Player but will not open in Final Cut or allow itself to be moved into the timeline. Anyone know why this is happening?
The .mp4 is in H-264 format and I have Final Cut Pro 7.0.3

Editing h.264 without conversion is not supported in FCP. You need to convert your clip(s) to an FCP edit friendly codec. What codec is appropriate is a function of what the properties of the source h.264 clip are.
You can find the properties for your clip by clicking on the clip in the FCP browser so that it is selected, then typing Command + 9. Either report what the item properties are for the clip, or take a screen shot and post the screen shot here if it is easier.
The reason that the clip plays back in Quicktime is that quicktime is a player, not an editor.
MtD

Error while activating objects copied into new namespace.

I am receiving the following error when I am trying to activate objects copied from an existing namespace to new namespace.
What could be the reason ?
Activation of the change list canceled Check result for Message Mapping MM_BBP_ESI_ERP_CONTRACT | http://frictionless.esource.com/v2.1: Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com

Hi,
How about activation namespace objects in tab "Change List"?
Regards,
Jakub

Network error since moving Essbase server into new VLAN

Similar Messages

Maybe you are looking for