Network error when ordering prints

I have been trying to order prints of over 1,000 of my photos and they appear to upload just fine and I am able to put in 1 4x6 on all photos. Then, it goes to a grey connecting line, which eventually turns blue. After awhile I get the network error message. I've tried several times over the last week to order the pictures and the same thing happens each time. Is there a limit to how many you can order at once? Do I need to split my order into two separate orders?

Welcome to the Apple Discussions. You very well may be getting timed out on the upload/order process. I'd try splitting the order in two and see if that will go thru unimpeded.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

  • Error when ordering Prints

    Hi
    When I try to order prints at the largest setting in Aperture, I often get a message stating my image or temp file is larger than 10mb so the order has to be cancelled.
    I can't seem to process any prints.
    Anyone else seen or resolved this?
    Also
    If I'm going to export to order from another supplier other than Apple, what's the best file format to export in? I'm thinking tiff jpg or dng?
    Hope someone can help.
    Thanks
    Gavin

    Second question first. It would be best if you checked with the printer regarding file requirements. Most on-line services will have there requirements listed somewhere on the web site. If not call them. Any good print service will e more then glad to discuss this before you send them work.
    As for your first question, I never order prints from Apple but I would imagine that they to have file requirements listed somewhere on the web site. If its telling you that the file size limit is 10mb there isn't much you could do about it except resize your file. But 10mb seems like a low size limit are you sure your reading the message correctly?

  • I could not get ExportPDF to work. Something about a network error when trying to sign in.

    I could not get ExportPDF to work. Trying to convert a pdf to a Word document. Got an error message. Something about a network error when attempting to sign in.

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

    I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

    Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • I get Network error when I sign in to register my CS5 illustrator. Any ideas how to fix it?

    My Adobe ID works fine when I sign in on the Adobe website but when installing my CS5 Illustrator I get network error when I sign in to register my serial number. Any ideas how to fix this?

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Network Error when trying to Publish to iWeb

    My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
    If anyone can help me that would be great!
    Thanks...CCM in CR

    Here's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
    There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
    So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
    -Allan

  • Ive got data on my phone and its keep saying network error when trying to connect

    Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W.

  • Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    No.
    Here are the available sizes:
    http://www.apple.com/ilife/print-products.html#prints

  • My Cosmos says network error when I try to update the software

    Can someone help me understand why my lg cosmos says network error when I try to update the software? Thank you!

    Imeans, this is kind of odd! The Cosmos, hasn't had any new updates to come out. I can look further into this for you. Which Cosmos do you have? Also, what zip code are you in? VanetrisC_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Today my iPad says network error when trying to run amazon instant video...

    Today my iPad says network error when trying to run amazon instant video... I fooled it into starting the movie, but the error message continues...

    What you need to do is go into settings
    Then go to wifi
    Tap the blue arrow to the wifi you are connected to
    Tap forget network
    Retap the wifi you want
    Reinsert your wifi code if you have one

  • Get "network error" when try to view Disney channels on Apple TV

    I get "network error" when try to view Disney channels on Apple TV. Tried restarting Apple tv and restarting my airport.

    Thank you for your feedback

  • WRT1200 Network error when paying music from external disk attached to the Router

    Hi everyone, I have one problem with my new WRT1200AC wireless routerFrecuently network errors when playing music from external USB3 disk attached to WRT1200AC Any idea to solve this problem Thanks in advance Regards, Rod

    Wireless Configurations
    Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
    What wireless modes are you using?
    Try Mixed mode, single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
    Channel Width set for Auto 20/40Mhz or try 20Mhz only.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&respid=0&snid=4&dispid=0&cpage=search
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. 
    Ensure any devices with WiFi adapter drivers are updated.
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
    http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0Rod2 wrote:
    Thanks I play music fom external disk attached to the router from my internal netwok. No Internet traffic. The network error occurs between a notebook and the router in my home network Thanks Rod 

  • Canon PIXMA MP980 networked Error Number : 311 Printer is in use

    I have a mixed network at home with PC and Mac. It is wired and wireless. I have installed the Canon MP980 as USB to the iMac to set it up then went thru the wired network setup. I was able to print with USB attached. I am unable to print to it as a wired printer. I get Error Number : 311 Printer is in use or an error has occurred.
    I am able to connect from the iMac via safari to its internal software over the wired network. Also, believe it or not I am able to print to it and scan from it, to an HP vista machine (the machine and OS that made me a Mac convert last year) It worked without a hitch.
    It doesn't matter how the printer is set up in print settings, I still get this error. I am unable to find any gutenprint support for this model number.
    Any ideas?

    I am a bit concerned about the URI. I didn't think the machine supported HP Jetdirect-Socket, even when using the 'CUPS' driver. You could confirm this on this Vista box, by opening the printer queue and selecting Configure Port. If it shows the queue as Port 9100 then that would indicate that the printer does support HP Jetdirect-Socket, which is it's name on OS X. From memory, on Windows you select something like BJ Network Printer.
    Anyway, you may want to try installing the non-CUPS driver and then selecting More Printers > Canon IJ Network. The printer should display with it's MAC address, which you should leave at this stage, and when you select it the driver should be automatically found.
    I also believe you could use the same method with only the CUPS driver installed, however I would need to confirm this on my MP970 at work tomorrow.
    PaHu

  • Unexpected error when ordering cards - Help!

    The first time I am trying to use iphoto and want to buy the cards that I made for Mothers Day and now I am getting this "Unexpected error occurred - Please try again later". Looking through this forum it looks like it's a common problem so it seems like iLife is not very reliable to order cards, books, etc....since so many people get this error.
    I tried to re-create my account the exact same as my itunes account but no luck - I am about to give up.

    I too am having this problem. I can order songs using my Apple ID through iTunes just fine, but when I try to setup the same account to order prints through iPhoto it says "An unexpected error has occured. Please try again later" after entering my shipping address

  • URL not found error when DESTYPE=printer !!

    When I am trying to send a print request to the report server with DESTYPE=printer and DESNAME=printer path, I am getting the following report server error:
    "Error: the requested URL was not found or cannot be served at this time. Oracle Reports Server CGI - The reprots server engine terminated abnormally".
    When I try with DESNAME=a different printer, it works fine. I am absolutely 100% positive that the printer path I am providing is correct. I need to print on the printer where I am getting an error because that printer supports different page sizes. I have PAGESIZE=14X8.5 set. The printer where I am not getting an error does not support pages bigger than 8.5X11.
    Any ideas ? Again am I missing any settings on the report server. One thing I noticed is that the printer where I am having the above error has spaces in its name, eg. (\\rgasion\F5-copyroom east -1) where as the other printer does not have any spaces in its name. I noticed that when I type in an http request on the web page, the spaces are being subsituted with '%20'.
    Thanks in advance.

    Hi,
    Please try with following options
    1. Enter DESNAME with in quotes as '\\rgasion\F5-copyroom east -1' and print the Report
    (or)
    2. Go To Windows Printer Setup, Change printer name to F5-copyroom_east_-1(Remove space with underscore), then try to print
    or
    3. If you printer is Shared Network printer, Open Printer Property dialog and go to Sharing page, there set share name as F5-copyroom_east_-1, then try to print
    Thanks
    Oracle Reports Team

Maybe you are looking for

  • W_AR_AGING_INVOICE_A.REMAINING_DOC_AMT

    In the W_AR_AGING_INVOICE_A table, we are noticing that there are some invoices that have been closed/cleared in our source EBS system that still have a non-zero balance value in the REMAINING_DOC_AMT column. I opened up the PLP_ARSnapshotInvoiceAgin

  • Error Data no longer available when SALV_WD_TABLE GET_MODEL called

    Hello , I have dynpro component on ECC6.0  POWL_UI_COMP which displayes service oders. This dynpro component has one more component usage component POWL_TABLE_COMP. This POWL_TABLE_COMP has used a SALV_WD_TABLE which is for ALV display. I have to cre

  • Customizing PDF page size

    I have a 5 x 3 (index card) template in Word 2007 - in Portrait I want to create a PDF of this document that I will use on an iPod Touch When I Print Preview in Word, I get the 5 x 3 size preview. Looks perfect! I selected Adobe PDF in the Printer Di

  • MULTIPLE ROWS IN OBJECT RELATIONAL TABLE, HELP

    Hi, Here is my problem explanation. Please help. I have created an object type address, and a relational table called employee. One of the column in employee table is based on the type address. Now suppose I want to have 5 differrent addresses for a

  • Recovery EUL from EEX file - Not enough memory

    Hi, I have the following problem. I need to recover the EUL from a. EEx file. At the time of the import and 65 porcient, in step 3/4 an error "Not enough memory". and aborts The. Ex has a size of 2GB Anyone have idea why this happens? thank you very