Network home folders, collaboration sharepoint and Microsoft Word 2008

I'm hoping someone who knows how Microsoft Word 2008 works on network volumes can shed some light on our situation.
We run a small managed network with about 15 leopard clients and a leopard server. We've got two sharepoints, a "homes" share for network home folders, and an "Office" share with our shared office document folders.
Several times a week, users will encounter a situation where Microsoft Word 2008 will claim that a file is open by another user, or that the file can be opened in "read only" mode, even though the file is not in use. Naturally, the problem cannot be replicated when I am present.
### My Hypothesis ###
My users are in the habit of quickly borrowing machines from other users to pull up documents in the "office" share by using the "connect as" button. So, for example, userA is logged in to her machine (and is thus connected to the network home folder on the server). userB comes along and borrows her machine -- without logging out, will connect to the shared office folder, pull up and edit/print a document, etc. We're not currently auto mounting the office share.
I know that Microsoft Word creates lock folders located in the .TemporaryItems folder at the root level of the "office" share. The folders are named "folder.xxxx", where xxxx is the userid of the account that created the lock folder. Everyone uses a network account, so everyone has a unique userID. If I list the .TemporaryItems folder using the CLI, i can see lock folders that are several days or a week old. So Word doesn't seem to be cleaning up after itself immediately, at least not always.
So my question: when userB connects to the office share on a borrowed machine (logged in to the client machine using the network home folder of userA), is it possible that word will now create lock folders for userB, and will be unable to clean up lock folders created by userA?
Anyone have other ideas for investigating the "file in use" problem?

Switched user back to the network home folder and adjusted the MS Word preferences so that the autorecovery files would be stored on the local client machine. There doesn't seem to be a comparable setting in the Excel preferences.
My initial testing suggests that this has reduced how often this problem occurs, but has not eliminated it. I tested by repeatedly opening and closing a couple of different word files in rapid succession -- i was able to replicate the "file opens as read only" problem occasionally.
I've talked to Apple server support about this issue. While they were helpful, they didn't have an explanation or solution for this problem. There are a number of postings in the microsoft mactopia discussion boards site where people report similar problems.

Similar Messages

  • Lost program icons Microsoft word 2008 and Microsoft excel 2008

    Hi I accidently turned Microsoft excel 2008 and microsoft word 2008 into wads of trash that disappeared when I accidnetly clicked the icons and moved them from the dock into the internet box.  I talked to one person already but can't seem to get back to them and he suggested that I use MIcrosoft Office 2008 but hte problem is is that I don't have it anymore because I deleted the program from my computer a few days ago (yesterday or the day before)  I had originally bought hte program from Best Buy and downloaded it from a disc but  I can't find the disc anymore.  Do you know what  I can do to recover the programs I checked the applications, office (of course, and word and excel 2008 aren't there and they aren't in the trash I checked there too.  I thought that it might be on my back-up time machine?  And I also couldn't go to undo to change what happened.  Thank you.

    Things just don't disappear. If you didn't put them in the trash, they must be there somewhere. Click the magnifying glass at the top right side of your screen and search for Microsoft Office and see if you can locate the folder. Also, I'm wondering if you actually installed office or if you were just running it from the downloaded .dmg file? When doing the search, keep an eye open for a Microsoft Office 2008 DMG file.

  • InDesign CS1 Unexpectedly quitting with Network Home Folders

    Hi
    We have a Mac OSX 10.4 Server installation running on a G5 XServe with 5 Mac Users running Network Home Folders as well as other services. When the Mac users are working off the server with their files, InDesign unexpextedly quits or when they try to save their work back to the server it reports that they don't have access gto the sharepoint to save their files.
    Any ideas?
    Paul

    Paul,
    We have had similar problems with CS1 and CS2, the only fix i have found is when the user cannot save, is to use the connect to server dialogue and to reconnect to the share point that way, in most cases the user can save after doing this. I have also seen this when the user is close to their disk quotas limit (some adobe programs need something like 2/12 times the file size to be able to save properly). For some reason it seems that CS will regularly lose its connection to the server, and i checked the Adobe site once and i am sure it said it was not supported in a network environment. It is certainly the worst program we have for problems since i have set up network home folders for students, second is Microsoft Orifice which also does the same thing.
    Hope this is some help, its been driving me and the students mad for the last year.
    Good luck,
    Kevin.

  • Stop network home from being created and shared on login

    I have successfully set up a OD server bound to Active Directory. I have the shares set up exactly how I want them - except - I don't want network users to have their home folder automatically created. I am only using AD for authentication and not network home folders. Is there a way for when a user logs in to not have the home folder created on the server and thus preventing it from being shared. I only want the shares that I have specified in the Share Point window to show up.

    Hi there,
    I bring good tidings .
    After some tweeking I've gotten this to work.
    Replace [YOURDOMAIN] with the first part of the FQDN, e.g. my.domain.net will make MY.plist
    Step 1:
    copy /Library/Preferences/OpenDirectory/Configurations/Active Directory/[YOUDORMAIN].plist to your Desktop
    Change the permissions so you can edit the plist file (I use Plist Editor pro to edit.)
    Step 2:
    Find the key:
    MCXDockSpecialFolders-Raw
    Step 3:
    Delete the string under it:
    0          AddDockMCXOriginalNetworkHomeFolder
    Step 4:
    sudo cp [YOURDOMAIN].plist /Library/Preferences/OpenDirectory/Configurations/Active Directory/[YOURDOMAIN].plist
    Reboot and watch the magic happen!!
    I have been fiddling about with some other settings in this plist, it seems to be very powerfull.
    I don't know why apple doesn't make options in the AD Plugin to manage these settings, but then again power = the power to break things.
    I still mount the network home drive, but I do it with a login hook so that I have the power.
    Hope to have made some people happy, but I bet I have.
    It's a pity I don't get points for resolving issues myself, this one would be word many points.

  • Changing location of Network Home Folders

    Hi
    We're about to add two 500GB mirrored drives to our Xserve in place of the two 250GB drives we have already. This means re-locating user's network home folders to a new sharepoint.
    Is this simply a case of setting up the new home sharepoints, moving the homes to the shares and allocating the appropriate new home share path in the user's home folder setting? I tried a test user and the only thing that didn't work was the shortcuts in the sidebar, which can be replaced.
    Any pointers welcome, thanks

    I've never tried this, but you may be able to use Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) and backup everything to a USB/Firewire drive. Then put in your 500GB drives and restore the backup to the new drives. You then wouldn't have to create new sharepoints, everything would still be the same, just with more storage. Someone correct me if I'm wrong on this though....

  • Network Home Folders on NAS

    hello all-
    i have recently purchased a QNAP TS809U-RP. i want to move all my network home folders to it. here are the steps i have taken thus far:
    1) created a new share on the QNAP via the QNAP web utility. the share is xServeData
    2) created a folder called "Home" in the xServeData - this is where i want all the home folders to reside
    3) went to Server Admin and created a new share for the "xServeData" share i created in the QNAP web utility
    4) went to Workgroup Manager and created a test user called, oddly enough, "Test"
    5) clicked the "Create Home Folder" for that user
    when i look on the QNAP a Home folder is created called "Test" but with only 2 folders inside of it:
    Library
    Sites
    when i go to one of the iMacs on the network i type the username and p/w for the user "Test" and the login starts but i get the error:
    "You are unable to log in to the user account "Test" at this time
    Logging in to the account failed because an error occurred."
    when i go back and check the new "xServeData" share's permissions versus the permissions where the home folders currently reside (on Drive 2 in Bay 2 on the xServe) i see that the permissions are:
    serveradmin, Allow, Read & Write, This folder
    staff, Allow, Read & Write, This folder
    others, Allow, Read Only, This Folder
    on the new "xServeData" share these permissions are:
    serveradmin, Allow, Read & Write, This folder
    staff, Allow, NO ACCESS, This folder
    others, Allow, NO ACCESS, This Folder
    when i try and change the new share to match the old share and save it just reverts back to the "NO ACCESS" for staff and others. i am sure this is probably what is causing the user "Test" from logging in but i don't know how to solve the issue. i am new to NAS's and am certainly not the most advanced OS X Server user. i have this in my home and my users are my family. this is really more of a hobby but i love to learn and play with this stuff.
    if someone has any experience setting up Network Home Folders on a NAS and hopefully on a QNAP NAS i would sure appreciate your help and knowledge to resolve this. it seems that i am very close but that i am just overlooking one or two issues......

    I am in the same boat. I would like to create mobile accounts but never sync. This is like having a local account but this way the password is in sycn with OD.  Then the Time Machine can do the backups to the home folder on the NAS instead of using home synching.
    How do we get the NAS box folders available to WGM? I need to know what to enter in the home folder section and be able to hit create home now and save.
    This will be using Snow Leopard 10.6 od master.
    Lannie

  • Network home folders owned by (unknown) user.

    I am seeing something strange happening and i will try and describe it as best as i can.
    This is happening in a middle school with about 750 users, 150 emacs(10.3.9) and 1 xserve(10.4.?).
    I am not sure if this is a capacity issue but it seems to happen when there are lots of users trying to log into the computers. There are several different work groups the students can choose from when they log in and at any one time there may be 60 to 100 users logged in with network home folders and 1 or 2 other auto mounting share points.
    Occasionally a few users will not be able to log in. A closer look will show that they are able to get passed the login screen and choose a workgroup and actually log into a desktop environment but they are not able to access their home folder. If you try and access anything in their home folder you will get an error msg informing you that you do not have sufficient access privilages. Of course the documents folder that normally sits on the dock is displayed as a question mark, and trying to launch any application will fail as it cant access the prefs file stored in the users library folder in their network home folder.
    There are a couple different scenarios i have observed when looking at the permission information on the home folders.
    Scenario one: when i look at the permissions on the home folder using get info tool, the owner is a completely different user. Doing an ls -sl from the command line shows the same information.
    Scenario two: when i look at the permissions on the home folder using the get info tool the owner is (unknown). Doing an ls -al from the command line will show the owner as being a number. I assume this is a uid number, and the number is usually a uid that does not show up in workgroup managers current list of users, and i assume this is why the get info tool reports the owner as being (unknown).
    I can fix the home folder by using a chown -r but dont know why this is happening to begin with.
    Does anyone have any ideas or suggestions.
    I have done some research on google but have not come up with anything concrete.
    Help
    Mark
    SD34

    This is not a definitive answer, but you are certainly pushing the capabilities of a single XServe. As best I understand it, the XServe is really meant to be part of a deployment of OS X server in an environment such as yours. You should really have at least one replica server for authentication purposes and a separate device, such as an XServe RAID, or at least another server to house network home folders. You should at least consider getting another box, even a dual G5 or Mac pro, make it a replica, and split the home dirs between the new box and the XServe. Think about it. You have a lot of users authenticating a buncg of shares and at the same time a bunch of users zipping all sorts of big and little dats files (like office or appleworks files) as well as all the web browser chache files and whatever other cache files are flying around. That's an awful lot for the XServe's network connection, nevermind the read/writes on the HD.
    So honestly, it would be really tough to tell if there;s just a bottleneck causing issues, or some other software/configuration error with that much traffic to a single server.
    And this is in no way meant to be a lecture - I learned a lot by trying a similar feat on my network

  • Network Home Folders - Sometimes

    Is there a way to have network home folders sometimes?
    Here is the situation. (all servers and clients are at 10.3.9, but could be upgraded to 10.4.x)
    In a school there is a 29 unit eMac lab and an iBook cart. The students each have a home folder on the server. When they log in to an eMac they use their OD/LDAP username and password. The OSX server authenticates them and then they use their network home folder. This works just fine.
    But when they use the iBooks, they are using Airport to connect to the network. Network home folders are too slow to work over a wireless network, so they have to log in using a local account and then mount their network home folder to save files.
    What I would like to do is have them login to the iBooks with their OD/LDAP information so that they can be authenticated using OD/LDAP but not use home folders when using the iBooks. (I could then put their home folders in the dock)
    Is this possible?
    Thanks
    too many to list   Mac OS X (10.3.9)  

    Considered, but won't work for this application.
    The students use different computers at different
    times. For instance the question is about users on
    eMacs some of the time and iBooks some of the time.
    So they would have at least 2 different computers and
    many people might use either of them at a different
    time. So a single computer could have many, many home
    folders.
    Just to press the issue: is there a reason this is a problem (disk space, for example, or security)? Because the whole point of PHDs is that you'll be getting synchronization even when multiple machines are involved. If you're worried about home directories piling up, you could implement a cron job to clean them. I'm not trying to suggest that PHDs really will work in your instance--just trying to suggest possibilities.
    In any event, it IS possible to modify your users' home directory settings on a client-by-client basis. You could, for example, have your users' accounts set to use network home folders for your wired machines, but override that setting on your iBooks to point to homes on the client. To do that:
    1. Open Directory Access on your iBook, select your LDAPv3 configuration, and edit it (Services pane > LDAPv3 > Configure, select it in the next window and click Edit. If you've checked "Use DHCP-supplied LDAP Server" you'll need to uncheck that and create a configuration for your server; consult the server documentation for more information.
    2. When you click the Edit button, you'll get a window for the selected configuration, with tabs for "Connection" and "Search & Mappings." Click the Search & Mappings tab.
    3. In the Record Types and Attributes pane on the left, click the disclosure triangle next to Users, and do two things:
    - Select "HomeDirectory" and delete it.
    - Select "NFSHomeDirectory" in the left pane, and replace the corresponding "homeDirectory" entry in the right pane with the following: #/Users/$uid$. Then, click OK to save your changes.
    4. Reboot the client, and log in as one of your network users. Here's what should happen: on this particular client, Directory Access will still log your users in with the account settings on the server, except the HomeDirectory attribute will be reset with the value /Users/<short user name>. That's what the NFSHomeDirectory line does: the sharp sign tells Directory Access to ignore the attribute in the user's server account, and overwrite it with the string that follows. The $uid$ tells Directory Access to substitute the field with that value (the LDAP uid field). So, for user John Smith, whose short name is smithj, the client will create a folder called smithj in the folder /Users, which is on the local client.
    You could in theory use this technique to place the home folders anywhere on your client (like in /tmp), but it's best to use the default /Users folder unless you have strong reasons not to.
    The advantage of this scheme is that you only set up the Directory Access preferences this way on the clients where you want to have local homes--e.g., your iBooks. Once you've correctly configured the Directory Access preferences and have verified that everything works, you can copy the folder /Library/Preferences/DirectoryService to your other iBook clients, so you don't have to go through this process on every machine.
    There is one caveat, however. Configuring Directory Access this way will effect ANY user who logs in to your iBook--that is, any network user on your server. You can't set this up differently for different sets of users on your server--for any client workstation, all users on the server get treated the same. This is presumably what you want, given that you don't want to server network homes over wireless, but it's important to understand the implications of what you're doing.
    The instructions above assume that you're familiar with setting up configurations in Directory Access. If not, you might want to read up on it.
    Power Macintosh G5 1.8/PowerBook G4 15 1.42   Mac OS X (10.3.9)  

  • Network home folders: iCloud password question re-appears at every logon

    Hello,
    Is there any way to enable iMessage and Facetime together with Network home folders. Im using Mavericks server (Directory services enabled) and two Mavericks clients. Every time a user that was using machine A logs on to machine B the iClouds password prompt re-appears and subsequently security questions are sent to iOS devices that a new device was added.
    Is there a way to circumvent this? I think I tried once in combination with mobile home folders. However, even if I excluded iMessage/Facetime system files from syncing, questions still re-appeared.
    The more iCloud services are tied into the system, the more you would like to use them; even if you are using network home folders.
    Regards,
    Thomas

    I also have this question.

  • Slow Firefox Start up when using network home folders on OS X server, Would like to speed it up

    So firefox crawls when starting up using network home folders. I'm wondering if there is a way to keep the caches local and only save personal settings to the home folder located on the server.

    upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • Home tab A-Z in Microsoft word document. doesnt work

    I am trying to arrange my references alphabetically using the home tab A-Z in Microsoft word document. But it didn't work, and i got a pop up window stating that '' Word cannot sort field in the selection. Any advices?

    Hi,
    How do you try to sort your references? Do you select the complete set of references and then click AZ? If so Word is telling you it needs a single set of words to select on. It will be hard to sort references if they exists out of multiple words and lines.
    Try adding your references to a table and set the table lines to 'no border'. In that case word can look for the first word of the first row of the table and sort in that.
    Maurice
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

  • ACK! "Your network home is in use" and I can't fix it!

    One of my users constantly get the message "Your network home is in use" massage at login or logoff with the buttons titled "Sync Now" and "Sync Later", and I've tried most of what I've read here but the "in use" message returns each time:
    - backed user up and then chose the "Sync Now" button
    - deleted the user on the server and recreated
    - deleted the user on the workstation and recreated
    - deleted .mcxlc file/directory
    Not sure how to proceed at this point.
    Any ideas?
    Network home folders are on an XserveRAID connected to a G5 Xserve running 10.4.8. Mobile users are only set to sync on login/logoff. The Workstation is a G5 running 10.4.8

    I forgot to mention that this also seems like a problem within the specific user file, since I've been able to login the same workstation, setup a local account based on a test "Mobile" user from my server and it would sync properly and not display the message that the network home is in use.

  • Moving Network Home Folders

    I would like to consolidate our network home folders onto one drive, into one volume. Is there a "best practice" limitation on how many home folders you should have per volume, disk, etc?
    /Volumes/Disk1/users move these (aprox 50) to:
    /Volumes/Disk2/users currently contains 350 HF
    What is the best procedure and tool to use to move the home folders?
    Thx in advance for any advice!
    G5 Dual 1.8   Mac OS X (10.4.8)  

    we did this in our district over the summer....went from 9 drives on 5 servers down to 2 drives on 2 servers
    insofar as copying is concerned, we found the quicked(and least user-intesive) was to just mount the "old" drive to the new one and use the ditto command via terminal
    it was most useful because we could set it and then go do other things

  • Storing network home folders on a NAS

    I'm wanting to set up a NAS to hold and serve AFP home folders to clients over the network. I'm figuring that doing this will improve performance on the network as clients can access the home folders directly from the NAS while the server is spending its time attending to other tasks.
    On page 126 of the User Management PDF, it describes setting up home folders spread across several servers. It requires making the shares automountable (as described on page 128 of the same document).
    Unfortunately, it only refers to AFP servers running OS X server. I'm wanting to use an AFP serving NAS. I figure one way would be to mount the NAS drive on the server and then share it, but wouldn't be surprised if that resulted in data flowing over the network to the server, then out again to the client – not very efficient.
    Is there any documentation for a way of hosting network home folders on a NAS? This will be using Snow Leopard server.

    Thanks for your comment. I had a read of the other post, and it sounds like the other people were wanting to do close to the same as me. The issue I do see with that method is the NAS becomes an external drive to the server. I was hoping for it to mount directly to the client computers.
    I suspect the iSCSI setup would result in home folder data being transferred from the NAS to the server and then to the clients, resulting in a doubling of network traffic. In that situation, using it as a FW drive may work better.

  • Newbee question on network home folders

    I have 3 or 4 networked Macs in my home and I want everyone to have access to their own home folder from any Mac. Therefore the necessity for networked home folders. But I know nothing about how to set them up or even if it is possible in this situation. I have a copy of Mac OS X 10.5 server but have not set it up yet. Some Macs are a mix of 10.4 and 10.5.
    How do I go about learning how to set this up? What are PHD (portable home directories)? How does mail work in a network home directory environment? All family members are on .mac mail.
    Thank you for your help in getting this set up in my home.

    A Network Home folder is simply where your Home Directory is stored on the Server rather than locally on you Mac.
    The experience of using the Mac does not change so Mail and all other applications behave as they do with a normal local home. As you say this allows you to log in from any Mac. but before you set this up it is advisable to make all of your Macs identical, e.g make sure they all have the same Application, fonts, plugins etc because it is only the files that are normally in HD > Users > yourhomefolder
    that are stored on the server, everything else stays local.
    As for setting it up http://www.afp548.com/ has some good guides for Tiger server that can be adapted for Leopard
    Portable home directories are similar in that the Home Directory is stored on the server, but a PHD syncs the directory to your local mac as well, so in theory this is the best of both worlds in that you work on a local home folder and everytime you log in and out your changes are sync'd back to the server.
    This still allows you to log in from another Mac, and also means you can work on a laptop away from your network.
    But like I said "in Theory" this is best of both worlds, and for the majority of the time it works well, but you can run into complications, such as errors syncing and the potential to loose work if you log into the account on two macs at the same time.

Maybe you are looking for

  • Problem On Editing a Smartform in PDF with Chinese

    Hello, we are using SRM and in  a specific transaction we are generating a SAP message wich is editing a form for the PO. When we want to edit it on SRM in chinese we have problem with a lot of  ### ans everything wich doesn't mean anything. To gener

  • Drag and drop with condition

    I have 3 circles of different colors and 3 images with those similar colors. I would like to be able to show the corresponding color when dropping a colored circle on it. For instance, by default, the red image is visible. If I drag the blue circle o

  • Vendor Search Control

    Hi, In the vendor search drop down when trying to list vendors, is it posiible to restrict only certain vendor groups can be view by certain users? Thanks, Teo

  • Bapi Fb70 and f-23

    Hi friends , Is there any bapi to do the process  fb70 customer invoice and f-28 Post incoming Payment . pls give suggestion . Regards Krishnan R.

  • How do you set a signiture!?

    How do you set a signiture for messaging...? Not email!!!