"Network host '10.0.1.1' is busy; will try again in 30 seconds" message
We have an HP 6MP printer connected to our new Airport Extreme, and it was working correctly (finally) after trying the workaround suggested in the discussions, but it no longer works. Instead all we get is the above message. Tried disconnecting the Extreme, restarting it, restarting the printer, the computers, all to no avail.
Suggestions?
iMAC 24" Intel, G4 powerbook, 17" non-Intel iMac Mac OS X (10.4.9)
That error message indicates you have added the printer in printer setup using IP printing. Is that what you intended? If that's what you intended, then be sure you Add the printer using IP printer > HP Jetdirect protocol. That's the one the AEBS can use.
Similar Messages
-
"Network host is busy, will try in 15 seconds..."
A user that I support has a MacBook Pro 15" running 10.5.8. He is on a LAN in a small office that has two ethernet networked printers and he has been able to print to both of them since January. He recently was in another office in Colorado where he forgot and tried to print to one of the printers but of course it didn't work because it wasn't on that office' LAN.
Now back at his local office when he tries to print, the printer looks like it is online and ready (shown in the Print&Fax Preference page as being Idle, no jobs queued) but when he prints he gets the warning message "“Network host is busy, will try in 15 seconds...”. He is on the wired LAN, not wireless. Windows PCs in the same office can print to the printer without a problem.
I remote connected to his MBP and deleted the printer both manually and by resetting the printing system. I added the printer back as it is detected by Bonjour but still get the error. I deleted it again and tried adding by using its IP address and specifying the CUPS driver, leaving the queue name blank (this is btw a Brother 4070CDW laser). Still get the error.
The other printer I added back by using it's IP address and CUPS driver. That one (a Brother DCP8045D) now works for printing.
I used http://localhost:631 to access the CUPS Administration pages but didn't see anything that indicated what might be the problem.
I'm wondering if this is some left over cache problem from when he was traveling or a firewall issue?
Any help is welcome.Hello Larry,
Generally the 'network busy' message generally indicates that the selected printer port is not available. As to why this would be happening when selecting the Bonjour advertised printer, I am not sure. But I would try pinging the printer to ensure you have a connection to the Brother. If that is okay then I would add the printer queue again, but this time selecting IP > HP Jetdirect-Socket (which is the same as Port 9100 printing which Windows will often default to and since they are printing it is worth setting the Mac the same way).
HTH
Pahu -
Word 2010 - Network is Busy. Try again later shows randomly when opening Word document
Hi All,
Here's my dilemma, I have a single user who when they attempt to open a word/excel document get the error message, "Network Busy. Try again later". The file is opend from the Network via Samba but this does not happen all the time but randomly,
and this is the only user who is experiencing this behaviour, which is leading me to believe it is their PC/office. There doesn't appear to be any performance issue on the PC or network delays to cause this. I haven't found any workable suggestions, so help
would be grateful.
Thanks,
DHi,
First, make sure that Office and Windows are completely up-to-date. Does this issue exist when document is saved to local disk?
I find a similar issue like your question and post it here. You can follow suggestion to check if it’s helpful.
http://www.experts-exchange.com/Software/Server_Software/Q_25071647.html
Here is some useful information:
“Worth a try, but unless there is something wrong with the AD server, or the file server is having problems with AD connection issues (both of which would cause more serious errors), that is not likely the issue.
To explain: the AD server issues a "ticket" to the file server and the client... the "ticket" has an expiration date (usually 24-hours) which is the maximum "duration" of that TCP connection. If the TCP connection is lost, a
new ticket is supposed to be obtained. So, with a mapped drive, the connection remains open and the "ticket" is allowed to expire, at which point the client is supposed to automatically re-connect -- thus, getting another 24-hour ticket.
Now I am assuming that you restarted the client system after changing the registry value.... that setting is read during network startup, so just changing it would have had no effect until restarted.”
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below.
This leads me to another dialog box that says: The file .......is not a valid installation package for the product iTunes. Try to find the installation package iTunes64.msi in a folder from which you can install iTunes.
That doesn't work either. What to do?
DeanDownload the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Atthempting to update my itunes and a box stating this pops up "the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.64.msi
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I tried to upgrade iTunes version 10.6.1. But the following appears "The feature that you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing package iTunes.msi". Can someone tell me how to resolve this?
"The feature that you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing package iTunes.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
hi guys i got problem apple software Update
i got masage
.The feature you trying use is on a network resource that is unavailable.
Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box below
and i cant find anything please helpThis forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum. You'll need to include more details, including the version of Windows you have, before anyone can do more than guess as to the problem.
Regards. -
Attempting to update from 10.1 to 10.4 I get this msg:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package “iTunes.msi”. ?
I locate the file in "Program Files\iTunes" and change the path. I then get this:
"The file ’C:\Program Files\iTunes is not a valid installation package for the product iTunes. Try to find the installation package ‘ iTunes.msi ’ in a folder from which you can install iTunes."
What folder will work ???Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
When I try to install or uninstall itunes i get "The feature you are trying to use is on a network resource that is unavailable. Click ok to try again , or enter an alternate path to a folder containing the installation package 'itune.msi' in the box below" Anyone know what to do?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hi,
Every single time I try and browse data in one of my tables, I get the annoying "Connection is currently busy. Try Again?" pop-up alert message with "Try Again" and "Abort" options.
This is very annoying and I dont know how to stop it happening.
Is this a bug or can someone suggest a setting I can try to get around it?
Cheers,
JulianI don't know if it's worthwhile raising issues with v3 as the developers are now working on v4. You can download an Early Adopter version available on OTN I think.
If you're new to SQL Developer, it's worth knowing that a single click on an item in the navigator tends to do what you would expect a double-click to do. I think a double click can cause the same action to be started twice. -
NETWORK ERROR. PLEASE CHECK YOUR INTERNET CONNECTION AND TRY AGAIN
I've been getting this message when I try and play some
games...Flash 9.0.115 is required to view this content. Your
current version is 9.0.47. Please download the latest Flash Player.
But every time and try and download it I get this error
message NETWORK ERROR. PLEASE CHECK YOUR INTERNET CONNECTION AND
TRY AGAIN.
I've tried changing settings but nothings working, can anyone
please help meI SOLVED IT!!!!! LATEST FLASH IS INSTALLED!!!!
Here's what I did:
Read the information in the service note about the ridiculously sensitive download manager (DM)
ID:
kb400530
It gives instructions about internet settings necessary for the DM to work on multiple browsers. I use IE 7. Some were really non-obvious, like windows need to have no constraints on size, position. Most have to do with security, Active X settings.
However even after I followed the directions, I got the same error message.
But I'd gotten the general idea of what the DM needed, and went back to my Internet Options, and made a couple of additional changes. I'm not sure which of these was responsible for the success, but I'm resetting them afterward anyway.
For all the settings in which they allowed Prompt or Enable, I chose ENABLE.
I set Enable (vs. Prompt) for Download signed Active X controls (not secure) - this prompts a security risk bar, which didn't interfere
I also:
Set ENABLE for Run components not signed with Authenticode
Set ENABLE for Allow previously unused ActiveX controls to run without prompt
Set DISABLE for Automatic prompting for ActiveX controls
Set DISABLE for Automatice Prompting of ActiveX controls
Set DISABLE for Use Pop-Up Blocker
Set ENABLE for everything in under Scripting section
Anyway, you get the idea. I was trying to give the poor software every break I could, and it downloaded with no problem.
And then, the acid test.....I tried the site that had crashed because of lack of Flash 10 - and it tna perfectly....
Take that ADOBE!!!!
I hope something equivalent works for you. -
HT1218 What causes error "Network Host 192.16x.0.1 is busy. Will retry in 30 seconds."
Wireless Printer error shows network host as busy. Cannot reconfigure to re-connect. It was printing ok. Then I tried to scan a doc and then it wouldn't print again. I have internet access. Receive email, etc. Tried reinstalling the printer software several times. Printer says it has successfully completed connection to the Router. But I continue to get the error "Network Host is busy. Will retry in 30 seconds." And it never prints. Also, printer config option is greyed out.
1. What root cause generates that error message?
2. What settings should I reconfigure?
3. How do I re-configure settings?
I am not a techie...a busy frustrated Grandma at home. Need step by step, just to get to the right menu.
Thanks for help.Hi Greg:
Thanks for the response.
Sorry, I'm using IPP. As an experiment, I printed a test page from Firefox running locally on the server, and that prints fine. So I have pointed CUPS at the right printer driver.
The other thing I've tried is to reset the printing system on the iMac by control-clicking in the area below the listed printer in the Print & Fax dialog and saying yes to "are you sure" when it warns about resetting the printing system. That leaves a blank pane. Then I started Word,
and invoked print. It came up with no printer selected, but offered a choice of the HP. When I select that, I see messages about gathering printer info (I expect that's Bonjour doing its thing), and the printer re-appears in the Print and Fax pane. When I "Print", I'm back to the usual problem.
Do you think I have something set incorrectly in the router?
Thanks. -
After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.
OK, I found this thread which answered my question.
http://discussions.apple.com/thread.jspa?messageID=610763򕇋
Maybe you are looking for
-
The MessagePerformanceUtils:totalTime issue in Flex 4 (rpc.swc) using LCDS 3.1 running under JDK1.6
We are facing an issue while using LCDS 3.1 running under JDK1.6 in Sun Solaris v5.10 OS & Adobe Flex 4. Scenario :- =================================== As part of our Flex-based client-server application (with Java backend) we have a performance rep
-
Free goods with delivery charges
Hi, My main vendor supplying a material for free of charge, but there is transportation charge need to be paid to transport vendor. How to handle this scenario. I have entered the freight charge at header, but system considering the total freight val
-
Whenever i try to sync my iphone to my computer, the computer will recognize the camera of my phone, but itunes does not register that the phone is connected. I tried restarting services, and i reinstalled itunes and all like it said to. if anybody h
-
Does the 11i suite provide functionality for the payment of external freight carriers based on shipments through Order managerment. I know that the freight cost can be calculated but I need this to integrate with Accounts Payable for payment. Also is
-
Can't hear .wav files in emai view window
Hi, I get .wav atatchments from my CallVantage voice mail. In the view pane I see the audio play bar but I get no sound. If I save the atatchment to the desk top and then launch it, everything is fine. How do I get the sound from the email view? Terr