Network Icon Not Responding

I click on Finder and then Computer. Within Finder, I see an icon for my hard drive and network. However, when I click on the icon, I get no response. I don't seem to have a problem if I click the network icon in the sidebar or from the Go menu and then Network.
One other note, the network icon looks like a folder. It no longer looks like a globe or ball.

Hi,
Please reinstall your network adapter driver to check the result.
Alex Zhao
TechNet Community Support

Similar Messages

Hello, Due to mannually triggered stackshot via springboard my be springboard crashed that`s why my phone network dose not responding now what can I do ??

Hello, Due to mannually triggered stackshot via springboard my be my phone springboard crashed, that`s why
my phone network dose not responding now what can I do ??

Since springboard was mentioned, that leads me to believe the device is jailbroken.
If that is the case, the OP is on their own as discussion of jailbroken devices is not permitted here.

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

Network printer not responding

Hello
When I try to print from my MacBook to my Canon network printer, I get the error message "printer not responding", even the printer works fine with both windows notebooks connected to the same WLAN.
I have a Canon MF8540Cdn printer connected with Ethernet to my router. The printer has the ip address 10.1.1.10, the gateway is 10.1.1.1 (Router IP) and the subnet mask is 255.255.255.0.
Then I have three notebooks, one MacBook (IP 10.1.1.101) and two windows notebooks (a HP notebook (IP 10.1.1.102) and a Lenovo notebook (IP 10.1.1.103)). All three notebooks are connected wo the same WLAN using enterprise encryption.
The two windows notebooks can print to the canon printer perfectly fine and have not havd any issues at all.
However, from the MacBook I can not print since the upgrade to OSX 10.9.1 Mavericks. I have the latest update from Mavericks.
So, I deleted the printer (settings - printer) and resetted the printing system and deleted the printer also in the folder "Library - Printers". Then I got the latest driver (version 10.2) from Canon and installed the driver (dmg file).
Next I added the printer in the in the settings as follows:
1. Hit the "+" buttton to add a printer
2. Select "IP"
3. enter the ip address of the printer (10.1.1.10)
4. Select "Line printer daemon"
5. The system automatically detected the printer "MF8500 Series" and filled in the location.
6. Add the printer
When I open the printer options now, I can see the toner levels corretly, so the MacBook must have connection to the printer.
In addition, I can open the printer web address in Safary by going to http://10.1.1.10 , this also works fine and I can modify settings too. So the IP connection is also fine here.
But, when I print a document, PDF, Word, Safari,..., the system firs report "connecting to the printer" and after a while it states "printer not responding"!
The printer seems not to get any info, as it does not start or show any error message.
However, the two windows notebooks can print fine, and I tried to print from windows, then directly after print from the MacBook, or first MacBook then windows or both allone, wait 1 hour print from MacBook, then wait one hour and print from Windows.
The result is always the same. The windows print fine, the MacBook does not print and reports printer not responding.
If I check the log file on the MacBook, it shows the time and the job number and then printer not responding.
Meanwhilte I deleted the printer aleready a couple times and also reinstalled the printer driver from Canon. On the Canon cummunity I also submitted a ticket, but everybody responded that the driver works perfectly fine.
Any idea, where the problem could be?
Thanks for any help,
Rolly

Select "Line printer daemon"
Why are you doing that? When you select the printer in the Add dialog, the driver should be entered automatically. Does that not happen?

Bottom row of icons not responding to touch

The bottom row of my icons (mail, phone, etc . ..) do not respond when I touch them. I have tried a restore vi iTunes and reseting by holding down the on/off and home button (Several times). I am at wits end. The slide to unlock works but not even the options under settings at the very bottom of the display. Not sure if anyone has seen this exact issue so I am posting a new topic.
Thanks for all your help.

That doesn't make any sense at all. If your phone was working prior to the 2.0 update and now it doesn't...it is a corrupt SOFTWARE load on your phone. 2.0 does not change the hardware. Last time I checked, all 1st gen phones are made the same way and have the same components (assuming there is not a component failure).
If you guys are having problems...back up all your data....clean out your phone so there is nothing on it. *Re download* the update (WITHOUT INSTALLING), because you obviously have a corrupt version on your computer (reinstalling what you have is not going to fix the problem). Then install the update (Do not try and do it by downloading and installing at the same time). Once the firmware has updated...resync your data back into your phone.
See if this fixes it. Myself and a few others have been posting every day about this method and so far no one has reported any problems when they update this way. I am continually amazed that people don't take this simple extra step to minimize errors (Given the fact that there has been so many problems posted in these forums).
When new firmware is updated on a phone it backs up everything and wipes it out of your phone. Given that, why would you want to keep all personal data on the phone while it is updating? If you have several gigs of info it is only going to take that much longer to back it up, then erase, then install, then verify..etc, etc. and open the window for more things to go wrong (time outs, etc.)
Should we have to do this? No...we should be able to just plug it in and go. But like I said, so far nobody has reported any issues updating using the method I have described above....so why keep doing the same thing over and over if it is not fixing your problem.

Email Setup Icon not responding

Its been very frustrating.
The Internet Email Setup option in Setup of my bb torch 9800 is not responding. I have tried rebooting, wipeout, reinstall of OS, couple of times, but nothing works. And when i try exiting the setup, the phone freezes. I have read many of users facing similar problem, but seems like RIM is in NO mood to resolve this one so guess i can call my smartphone a DUMBphone instead or is there any resolution to this?
Solved!
Go to Solution.

This issue actually does have a resolution. Follow the link below and follow the workaroud at the bottom. This issue normally occurs when you have to do a wireless update of your email client through your carrier. You will have to get in touch with your carrier to find out their <brand> though. Also make sure that EmailClient has the E and M capitalized.
KB26055- Unable to access Email Setup after automatic update

Torch 9800 ''email set up icon not responding'' ... unable to edit or set up email accounts.

Torch 9800, Network provider, O2 UK.
Although my BlackBerry service with O2 is connected and working as normal, I am totally without email on my Torch 9800. I have owned the Torch 9800 since March. All has been well until last week when I changed the password on one of the 3 email accounts I had set up on my device. This password change left one of the accounts unable to send or receive mail, and is also what lead me to discover that I could not enter email set up on my device or via my network providers website ( www.o2email.co.uk ) .
I have spent hours on the phone with O2 discussing this issue. The usual checks and procedures have been carried out, battery pulls, checking settings etc and the service books have been deleted and resent several times. These actions have not resolved the problem but instead led to the loss from my device of the other 2 email accounts which were working correctly but have now disappeared into thin air. Having tried all possible solutions with O2 I now come here looking for an answer.
When I visit my Network Providers BlackBerry mail service trying to create an account using my pin etc, I am without fail getting a pop up box containing the error message ''Your account is not accessible via HTML browser. Please use your devive to access BlackBerry Internet Service'' !? The result is the same whether I log in from my device over 3G or Wireless, or from a PC (have tried several browsers) .
On my device, when I click on the Email Accounts icon from the setup menu nothing happens, no response at all. I have tried many times and there is just no way to set up or edit mail accounts. I am without mail on my device and growing increasingly short of patience.
I am now hoping somebody here can offer me some advice on how to resolve this issue. What use is a BlackBerry without email capabilities ? I see from researching email set up problems on the Torch 9800 that I am not alone here so if somebody at BlackBerry is listening ? If this is a Torch 9800 issue then I am sure you will be doing all you can to resolve this but in the meantime PLEASE help by offering a solution to the issues I have mentioned.
Thanks
BlackBerry is for Life not just for Christmas
Solved!
Go to Solution.

Welcome to the forums, bs342!
Well, since you searched the forums, you are undoubtedly aware that the problem you report is unfortunately a common one these days. The good news is that RIM is definitely aware of and working on the problem.
First, let's try something on your computer. What browser are you using? Your problem there might just be as simple as clearing cache in your browser, then closing and reopening the browser to try the website again.
If that doesn't work, try this:
From your device's browser, go to mobile.blackberry.com. Select your country of choice, then go to Communicate>Email. Scroll down to Other Personal Email and click on Integrate Now, then Launch Email Setup. You should be able to integrate your e-mail accounts that way until RIM has fixed this issue.
Please let us know how it goes!
*** If I've been helpful please consider clicking the LIKE BUTTON beneath my post.
*** Please remember to mark your thread as "Resolved" by clicking on OPTIONS to the right of the post and selecting "Accepted Solution."

Transfer music on pc suite icon not responding+n35...

guys, i manage to connect my phone (3500c) via the latest pc suite, everything went well except i can't use the transfer music feat, i clicked the transfer music icon and it doesn't respond, what gives? thank you for your time

Have you tried re-installing the PC suite? Please do check if you do meet the pc requirements(processor and ram) for the latest Nokia PC Suite. Remember it's also a factor.

P55-A5312/Classic 8 start/Start menu icon not responding

I have a P55-A5312 laptop running on Windows 8. I have the Classic Start 8, and recently the start menu icon hasn't been responding when I click on it. It worked for a bit yesterday but now it isn't working again.
Two days ago, I tried a power reset. That did little if anything.

Sally, try reinstalling Classic Start 8.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Some app icons not responding

Everything was working. I turned off the ipad2, then when I turned it back on, all icons worked, except those that were purchased (I.e., Netflix, games). Those were not accessible. I'd hit the icon, and nothing. I've restarted.

I've seen people recommend downloading a free app, and then trying the apps.

Windows 10 and MarvellYukon Network Adapter not responding properly

With W10 preview the "Marvell Yukon Network-Adapter" does not work properly.
It destroys the ethernet-integrity (some nodes are not shown on other computers anymore when W10 is up) und the network speed is about a few kilobits!
RDP connection to W10 machine will lost unexpectedly! It seems to be a massive driver problem.
Regards

I found the reason: after installing the new build "Jumbo Frames" were activated to 9000 .
Really mysterious, I never touched these settings ...

"Not responding" appears for 60 seconds - why?

I am using Firefox ver. 4.0.1 with Google toolbar; Windows 7 Ultimate, 32-bit
When I click the Mozilla icon "Not Responding" appears for about 60 seconds. I wonder why this is happening? Could it be a service has not started? What is FF looking for or waiting for. What should happen when I click the Firefox icon? How can I log events and see exactly what did happen?

https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding

Wirless icon not displaying, but says I am connected to network

I am a new Iphone user, so I apologize is this a rookie questions. I believe I am connected to my house wireless connected as the name of my network is checked off when I go to settings and Wifi.
My question is, though, why is my icon not displaying on the top left corner? It displays when I am connected at work and everywhere else I was able to connect. Is there something in my settings that I may have checked?
And, does that mean I am not really connected wirelessly?
Thanks in advance for your help!

Thanks, all. So, I just rebooted and there was no change.
Then, as SteveCWatkings recommended, I went into my settings page. I went into the properties page, and there isn't anything listed beside IP address, Subnet Mask, Router, DNS, etc. They are all empty...
*UPDATE*
Okay, something just happened. AS I WAS RESPONDING, I was clicking on each of the fields (IP address, Subnet, etc to see if I could enter information since they were empty. And,when I got to DNS, it allowed me to type something in. Not knowing what to enter, I clicked back and it took me back to the Settings page. So, I clicked on my network again and when I tapped my network, all the fields were filled in, and the icon appeared.
So, now it appears to be connected. I don't know if it will remain connected, or if I had to tap something (DNS?) or if it was glitch, but it appears to be working now.
Thanks a ton!

Illustrator "not responding" with networked account

Hello
1st time here...
We are running a small network of 33 iMacs (current Thunderbolt edition) on MacOS 10.6.8, attached to a MacPro Server running MacOS X Server 10.6.8.
We have about 130 users (school environment).
As maybe a speciality, the user home folders are on the Server in the Directory called "Home" (which is not on the server boot volume)
We bought a Volume Licence of CS Master collection vesrion 5.5.
We tweaked Adobe Acrobat to not crash following the redirect advices given elsewhere....
But we have no luck getting Illustrator to do what it should on these networked accounts...
What it does: click the Icon in the Dock (or double click the Application Icon in Finder):
it bounces a few seconds in the Dock and comes to rest. No splash screen or any kind of message.
If we look in Activity Monitor, Illustrator is in status of "not responding".
If I check the Log Illustrator writes in it's log, it stops after verifying the serial number.
I already contacted the local (Swiss) Adobe support by telephone, they told me:
if Illustrator runs with a local administrator account, we cannot help you
I contacted Adobe Live chat this morning. They told me to contact the phone number that gave me the above answer...
Any hints? I seem to be running in circles...
(sorry for english terms, it is not my native language, and i'm trying to translate from a german speaking Mac system)
Andreas

well, I did not change the operating system, I changed computers (server and clients) which came with a new operating system :-). The new computers probably would not run with the old operating system (10.4.11) and is not really good punblicity as a school to run old versions of applications ;-)
I got it running today...
For the records: Our support suggested to redirect
~/Library/Caches/Adobe/
~/Library/Caches/AdobeHelpData/
to the local disk.
I did not find
~/Library/Caches/AdobeHelpData/
in the folders of a local user who had already started Illustrator once, so in the end I redirected the whole
~/Library/Caches/
to the local disk. This might be too much for the problem I had to solve, but seems to do the trick and doesn't seem to have bad sideeffects...

V6.01, Windows 7, click on icon, "firefox is already running but not responding" Task manager doesn't know about it. I can't quit it or get it to load. Brand new install. What to do?

Brand new Lenovo computer, Windows 7 Home. New install of Firefox 6.0.1, set as default browser, don't launch when I click done. Icon appears in tray. I click the icon, and a message says "firefox is running but not responding. To open a new window, you must first close the existing process, or reboot". It's not obviously running. I can't find a way to make it quit. Task manager doesn't list it as a current application. Uninstall using the control panel uninstall function and then reinstalling gives the same message. Rebooting doesn't fix the problem and gives the same message. Firefox had been working until I tried to update my bookmarks.

No can do. I can delete the current profile and install Firefox, which should create a new blank profile. The message still says "Firefox is already running." I can place my old profile in the proper folder, and Firefox will still be already running. I can't actually use Firefox, because even though the message says it is running, there is nothing on the screen I can access.
After uninstalling Firefox, deleting the two items left in the Programs folder, and deleting the profile again, it still didn't work. I then got frisky and from the Roaming folder I deleted the Mozilla folder which contains the Firefox folder which contains the now empty Profiles folder. That worked, and a new set of folders with a new blank profile were created. So apparently it was the empty folders that never got deleted that were causing the issue.
Thanks for your suggestion. It got me thinking.

Network Icon Not Responding

Similar Messages

Maybe you are looking for