Network Intel iMac to G3 DV400

This is a 2-part test post:
1 to see if it's possible to award points after marking a question 'Answered' so please forgive me if no-one gets points.
2 Regarding subject: How do I do the above (DV400 runs 10.4.9 & doesn't have Airport card).
Steve

#1, thanks for the info... wonder when it OR my Brain changed things!?
#2, never tried Mac->USB<-Router... don't have such a Router, but interesting question, seems that it should!
<div class="jive-quote">Why won't the ethernet wire from router not go into G3?
You wouldn't be trying to plug it into the Modem Port would you? Similar shape, just smaller.
Built-in Firewire says I don't have IP address & can't connect to internet.
Requires joining a Network on the IntelMac, iirc, but if you need Internet, then Internet Sharing must be enabled on the IntelMac in NetWork>Sharing>Internet Tab.
BTW, thanks for the Solved before we actually got there!

Similar Messages

Networking Intel iMac, G4 iMac, & Compaq Laptop?

I networked my Intel 24" iMac (Airport Extreme card), my wife's G4 20" (G4=1.25 mhz; ZDlan AirExtreme USB network adapter), and a Compaq (Windows XP; Motorola notebook adapter card) laptop with an Apple Airport Express base station. I used the installation software that came with the USB AirExtreme adapter card on the G4 iMac, and to my surprise they all worked together just fine for several months. I could get the internet and print from the network printer from any of the three computers. After about two months, I started having problems getting the internet on any of them and called my ISP (Bellsouth). Bellsouth "upgraded" the firmware on the (Westell) DSL modem, fiddled with various settings on both the Intel iMac and the Westell, and finally got it so that the Intel iMac could get the internet. They then announced that they had thus met their obligation to me and said the rest was Apple's problem. I fiddled with the Compaq and got it back online, but the G4 iMac was never able to connect. The signal from the base station was making it to the G4 iMac, but I couldn't get the G4's OS 10.3.9 network settings to recognize the PPPoE server. After installing, uninstalling, and reinstalling the ZDlan software numerous times to no avail, I called Apple tech support, and they tried everything they could think of for nearly two hours without success, and concluded that either the USB modem had stopped working, the ZDlan software had been corrupted, or the OS needed reinstalling on the hard drive. He emailed me the instructions for how to do this without losing any data or programs. I called the eBay store that I bought the USB modem from, and they're sending me another new one (with installation CD) for free, but if the new one doesn't work, it looks like I'm going to have to face reinstalling the OS and praying I don't screw it up.
My question is this: have any of you had success using the ZDlan AirExtreme (it's made in Asia and marketed under different names; it looks like a tiny blue Zippo lighter) with a G4 (1.25mhz; 20") iMac? Is there some other USB network adapter that would work better with an Airport Express base station on this G4 iMac? Does anybody have any alternative suggestions for me?
Intel iMac Mac OS X (10.4.9)
Intel iMac Mac OS X (10.4.9) 24"; 3 GB RAM; 256 MD VRAM; 500 GB HD

When I bought my refurbished iMac G4 direct from Apple online,
I also purchased the AppleCare protection plan and a refurbished
AirPort Extreme card for it; at the time, the card retailed for more.
And until September, my computer and the wi-fi card are covered.
The USB 2.0 iMacG4 models [or, 1GHz G4 processor + USB 1] and later
can use the Extreme card; the specs for the 1.25GHz 17" and 20"
are very similar in most ways other than the size of the display.
Now the price for some parts are lower. I know where I can get an
unused/new Extreme card for free; a friend was sold one by the
Apple Store online for his iMacG4 700MHz computer. Of course
it won't fit and he's too good a person to bother returning it...!
gaelic2, you are welcome to the additional input; a good used
card of the correct type could likely last for years, and it says
Extreme on the face of it. Best wishes.

Printing with a networked Canon iR 3220 and my Intel iMac

I am at my wits end and I hope someone can help.
I am the sole Mac user in my company. I have a brand new, shiny 24" dual processor (intel) iMac running OS 10.4.9, that is connecting wirelessly to our network. We have a mixture of IIS and Linux servers (I believe the IIS is solely for the Windows Exchange server) Ther are 30 or so printers on the network and the one I am supposed to be printing to is a Canon Image Runner 3220 (iR 3220).
I am no Mac newbie, but I can't get the thing to print correctly. I have updated the driver from Canon (v. 1.70PS) and the PPDs (v. 2.25), followed the instructions and it will not automatically select the correct PPD. When I reset the PPD manually, it spools to the printer, but then stops all my print jobs. I try to resume and it spools and stops.
I have tried adding the printer via CanonIP, LPR, Appletalk (which gets me a message that I am connected incorrectly), setting up a sacrificial altar to the printing gods...nothing seems to work. I've tried using the iR 3200 driver and that doesn't work either.
Does anyone have any suggestions? I would appreciate any help I can get at this point.
Mike

Hello Mike,
The first thing you need to do is determine if the iR C3220 is using the Canon printer board or the imagePASS-C1/C2 print server option. If you look at the back of the iR C3220, and there is a rectangular box with an Ethernet cable connecting to the copier, and what looks something like a SCSI-2 cable also connected between the white box and the copiers interface board, then you have the imagePASS controller. This device requires a different driver to the PS v1.70 and PPD v2.x you are currently using. It also requires a queue name of 'print' or 'direct' (or 'hold' if you don't want the job to print) and it must be entered in lower case.
Since it sounds like there are PC's on the network, have a look at their printer setup and see which driver they are using. You can also check their port config to see how they are connecting.
If the iR C3220 doesn't have the imagePASS print controller and the PC users have the PCL5c driver installed, then you may find that the iR C3220 doesn't have the PS option - it may be PCL5c only. The easiest way to tell is to open the printers web page (called RUI) by entering the printers IP address in your browser of choice. With the default page open, select Additional Functions and then Custom Settings (you may be prompted for a system ID & password). If you get past this the new view will show if you have PS as well as PCL. If there is no PS, then you will have to look at installing the latest version of Gutenprint and selecting Generic PCL5c as your 'ppd'.
If the PS option is installed, then the v1.70 driver should be okay, although there is a trick to adding it. In the Printer Setup Utility, after clicking Add, select More Printers and then Canon IP (PS). In the new window input the IP address and a queue name of LP. When you click Add the copier is queried by the driver to determine what model it is, meaning that once it is displayed in the printer list it should show the iR C3220. Given that this didn't happen for you (and if the imagePASS is not being used) then a likely cause can be the disabling of SNMP in the copier setup. You may have to get the IT guys to enable this (or at least explain why it is off).
If you go the other way of manually selecting LPD as the protocol (AppleTalk is not supported by the PS v1.70 driver) then you need to ensure that for the print using you select iR C3220 CanonPS for the ppd. If you see Canon iR C3220, don't use this as it is the wrong ppd for the PS driver - it is there as part of the PPD installer.
If you want to try using the PPD, then you can use AppleTalk but of course this has to be enabled in the copier, and if your the only Mac then it is likely that it is disabled. Again the RUI page can tell you this or you can print a Config page from the copier (I think you go Additional Functions > Report Settings > Network > User Data List).
Hope something above is helpful and if not, please reply back.
Paul

Dual networks, express and extreme problem with Intel iMac accessing both

I have two airport networks setup to two different ISP's. One is setup using two Airport Expresses with a printer hung off one. The other is setup with an Airport Extreme with two USB disks.
I have a G4 iBook 14" laptop and a MacPro 17" Intel laptop that see and can bee switched between both networks utilizing Internet Connect. They are running OS X 10.4.11.
The other system is an Intel iMac 20" (late 2006) running OS X 10.5.1. The only wireless network it sees is the Airport Extreme. This is frustrating because I want to be able to switch to the Express network to print and cannot get the iMac to recognize the network. Before upgrading to 10.5.1, I could, on occasion, see the other network, now I can not.
Has anyone experienced this and is there a way to fix it? I believe it is operating in 802.11n, but have no way to verify this.

I miss posted this in windows. I reposted this in the Airport Extreme.

HT3819 I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

AirPort in Intel iMac loses connection and does not see network

I bought an Intel iMac in the summer of '06. I had no problems connecting my airport card to my house wireless network which uses an AirPort Extreme Base Station.
In september I brought my iMac to college and used an AirPort Express as my base station. I had no problems other than that the computer did not automatically reconnect to the network upon start up.
In december I returned home and configured the AirPort Express (located on the main level of the house) to extend the network of the AirPort Extreme (located upstair in the bedroom next to my iMac).
Lately the iMac loses connectivity to the wireless network randomly while the computer is on, even in the middle of using it. Not only does it lose the signal but does not list my network when i click the airport signal icon on the top bar of the screen. Once in a while it will have it listed but will give me an error when trying to connect. The only way I have of fixing the problem is to restart the computer.
I know the airport base station works fine and the network is still there becasue I have a PowerBook G4 that I will put right next to the iMac and the PowerBook will still be connected to the network.
Can someone help?

I have a very similar problem. My machine's airport connection has always been a little flaky, but it's always gone on working. However, yesterday I turned on WEP 128 bit encription. It now connects for a few minutes and then I see the signal strength gradually die until it goes off completely. There are then two ways to get it back working: 1. close the lid, then open it again; 2. tun off the airport, then turn it on again. When I do that the signal strength suddenly comes on full after about 3 seconds. The G4 iMac I have doesn't suffer from this problem. I am using a netgear access port as the base station.
Macbook Pro Mac OS X (10.4.8)

Intel imac startup hangs on "None of your preferred networks are available" dialogue

Hi everyone
Running a 2006 Intel iMac, 10.6.8
I have recently run into the "grey screen at start up" issue that is documented here: http://support.apple.com/kb/TS2570
I ran every routine in this article, up to and including a disk repair off the OSX install disk and this step seems to have fixed the grey screen problem. However there is still one major problem unsolved that the article does not cover.
Boot up runs normally and allows me to get into my account (there are 4 accounts on the machine). However i am then getting a dialogue screen "None of your preferred networks are available" with a list of local wireless networks (mine and neighbours).
I have had this dialogue screen at times in the past and have simply been able to click cancel to bypass it. However the system is now hanging on this dialogue. If I try to click Cancel or Other the dialogue box changes position and the remainder of the desktop darkens, as if an action is taking place, but nothing happens beyond that.
I have seen many other discussion posts on the "Preferred Networks" dialogue, but only one which describes the system actually hanging on this dialogue - that was in 2007 and the user was going to reformat the HD - he/she didn't post the outcome.
This iMac is normally connected to the router by Ethernet cable. I have tried booting with and without the cable attached. I have tried booting in safe mode. Neither of these have had any effect.
Can anyone recommend any other fixes I can try? Or is a complete reformat the only option?
Thanks in advance for any help, hugely appreciated.

Thanks Roam - however I think my situation is different.
In the case you refer to, the user was able to cancel the "preferred networks" dialogue and then proceed normally to system settings to apply a fix to stop this dialogue reappearing in future.
My problem is that the Mac *completely freezes* on this dialogue box - clicking Cancel simply does not work, I can't access any other menus or applications.
I forgot to add that the spinning progress wheel appears intermittently on the "preferred networks" dialogue box, suggesting that some sort of routine is trying to run, but never successfully.
Thanks for your reply nevertheless, really appreciated.
Anyone else out there with any experience of this?!
Thanks in advance

Intel iMac stuck in reboot loop

Since the last few days, my 6 month old Intel iMac is stuck in a reboot loop.
Configuration:
Model Name:          iMac
Model Identifier:          iMac12,1
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
OS: 10.6.8 (with patches applied as they become avaliable)
It is connected to a UPS at all times.
I always put it to sleep at night. Sometimes it stays in the Sleep mode for a couple of days (i travel and wife does not use for some time). But it always would "wake" up from Sleep on a keyboard touch. Magic mouse battery died a few days ago, so put in a new pair of battery, had the usual problem of "pairing", fixed that and continued on.
(Coincidentally, it almost also marks where my problems started).
Now, when i press any key, the iMac reboots. And then just before it looks like it will show the wallpaper, it reboots. and this continues on - sometimes 10-15 times. I press the power key and switch it OFF. Press the power key again, no go - stuck in the reboot loop. Run the Apple Hardware Test (exhaustive one included - it reports no issue found). Do a SMC reset (take off the power cord from the back of the iMac for 35 seconds) and put it back. Switch off the mouse and attach a USB mouse and press the Shift key to boot into the Safe mode. This works! Installed Pacifist to check for any non-Apple kernel extensions, none found...
Since AHT reports all fine - can hardware be ruled out?
Could it be the magic mouse? Need to try it (just wary of the reboot loop )?
If it is the mouse, is it covered in the 12 month initial warranty (I am in India)?
Console log reports this line:
08/06/12 7:20:59 PM
configd[13]
Sleep: Success - AC
com.apple.message.domain: com.apple.powermanagement.sleep
com.apple.message.signature: Success
com.apple.message.value: 0
com.apple.message.result: Success
com.apple.message.uuid: A9EDA79D-440F-4CD5-B3FA-5A6451E6677B
and this:
08/06/12 7:20:59 PM
configd[13]
Wake: Drivers Failure - AC - HDEF SATA
com.apple.message.domain: com.apple.powermanagement.wake
com.apple.message.signature: Drivers Failure
com.apple.message.result: Failure
Is it the HDD?
Any/all help is appreciated. I am going to carry it in to an Apple Care tomorrow, but was curious to see what the community had to say.
Thanks,

Well, it is getting odder now...when i read your message and click the console icon on the dock, the iMac just crashed and rebooted!
Here are the console messages just before and after the most recent crash (at 12:07):
08/06/12 11:53:34 PM
Console[919]
asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
08/06/12 11:53:35 PM
Console[919]
asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
08/06/12 11:53:36 PM
Console[919]
asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
08/06/12 11:53:37 PM
Console[919]
asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
09/06/12 12:07:00 AM
com.apple.launchd[1]
*** launchd[1] has started up. ***
09/06/12 12:07:18 AM
com.apple.launchd.peruser.501[87]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
09/06/12 12:07:21 AM
com.apple.launchd.peruser.501[87]
(com.apple.Kerberos.renew.plist[112]) Exited with exit code: 1
09/06/12 12:07:22 AM
com.hp.messagecenter.launcher[115]
ThrottleProcessIO: throttling disk i/o
09/06/12 12:07:23 AM
com.apple.launchd[1]
(com.apple.xprotectupdater[20]) Exited with exit code: 252
09/06/12 12:08:37 AM
[0x0-0x14014].com.google.Chrome[147]
[0609/000837:INFO:breakpad_mac.mm(177)] Breakpad disabled
09/06/12 12:08:43 AM
[0x0-0x14014].com.google.Chrome[147]
[147:-1273409536:105210075659:ERROR:backend_impl.cc(1148)] Critical error found -8
Here are the console messages just before and after the most recent crash (at 12:07):
Jun 8 23:53:01 localhost Console[919]: asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
Jun 8 23:53:32: --- last message repeated 18 times ---
Jun 8 23:53:32 localhost Console[919]: asl_file_open_read() failed on path /var/log/DiagnosticMessages/2012.06.04.asl with error Invalid Data Store
Jun 8 23:54:02: --- last message repeated 5 times ---
Jun 9 00:07:00 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 9 00:07:04 localhost DirectoryService[15]: Improper shutdown detected
Jun 9 00:07:04 localhost blued[17]: Apple Bluetooth daemon started
Jun 9 00:07:12 localhost fseventsd[34]: event logs in /.fseventsd out of sync with volume. destroying old logs. (14259 14 14295)
Jun 9 00:07:12 localhost fseventsd[34]: log dir: /.fseventsd getting new uuid: 848839F3-1F7D-409B-A5F1-14170B9CD90D
Jun 9 00:07:12 localhost bootlog[41]: BOOT_TIME: 1339180618 0
Jun 9 00:07:15 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 9 00:07:16 localhost com.apple.usbmuxd[22]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
Jun 9 00:07:16 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[30]: Login Window Application Started
Jun 9 00:07:16 localhost com.apple.kextd[10]: Can't load /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalModemSu pport.kext - no code for running kernel's architecture.
Jun 9 00:07:16 localhost com.apple.kextd[10]: Failed to load /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalModemSu pport.kext - (libkern/kext) requested architecture/executable not found.
Jun 9 00:07:16 localhost com.apple.kextd[10]: Load com.apple.driver.InternalModemSupport failed; removing personalities.
Jun 9 00:07:16 localhost configd[13]: network configuration changed.
Jun 9 00:07:16 localhost configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Jun 9 00:07:16 localhost configd[13]: DHCP en1: INIT-REBOOT transmit failed
Jun 9 00:07:18 localhost loginwindow[30]: Login Window Started Security Agent
Jun 9 00:07:18 localhost loginwindow[30]: Login Window - Returned from Security Agent
Jun 9 00:07:18 localhost loginwindow[30]: USER_PROCESS: 30 console
Jun 9 00:07:18 localhost com.apple.launchd.peruser.501[87] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jun 9 00:07:21 localhost configd[13]: network configuration changed.
Jun 9 00:07:21: --- last message repeated 2 times ---
Jun 9 00:07:21 localhost com.apple.launchd.peruser.501[87] (com.apple.Kerberos.renew.plist[112]): Exited with exit code: 1
Jun 9 00:07:22 localhost com.hp.messagecenter.launcher[115]: ThrottleProcessIO: throttling disk i/o
Jun 9 00:07:23 localhost XProtectUpdater[20]: Ignoring new signature plist: Not an increase in version
Jun 9 00:07:23 localhost com.apple.launchd[1] (com.apple.xprotectupdater[20]): Exited with exit code: 252
Jun 9 00:07:32 localhost warmd[21]: [fetcher_open_file:936] open("/var/db/dyld/dyld_shared_cache_x86_64") => -1 (errno: 2)
Jun 9 00:07:35 localhost ntpd[19]: time reset +0.205296 s
Jun 9 00:08:37 localhost [0x0-0x14014].com.google.Chrome[147]: [0609/000837:INFO:breakpad_mac.mm(177)] Breakpad disabled
Jun 9 00:08:43 localhost [0x0-0x14014].com.google.Chrome[147]: [147:-1273409536:105210075659:ERROR:backend_impl.cc(1148)] Critical error found -8
Here is the system.log when the iMac was first sought be woken up from sleep:
Jun 8 07:21:47 Manoj-Satis-iMac loginwindow[30]: no spins reported for this wake
Jun 8 07:22:46 Manoj-Satis-iMac loginwindow[30]: loginwindow SleepWakeCallback WILL sleep
Jun 8 07:22:54 Manoj-Satis-iMac loginwindow[30]: loginwindow SleepWakeCallback will power on, Currenttime:6/8/2012 7:22:54.006 AM - Waketime:6/8/2012 7:22:53.330 AM = Deltatime:0.676087976
Jun 8 07:22:54 Manoj-Satis-iMac applepushserviced[125]: <APSCourier: 0x106741520>: Stream error occurred for <APSTCPStream: 0x107315250>: Error Domain=NSPOSIXErrorDomain Code=57 UserInfo=0x107539b80 "The operation couldn’t be completed. Socket is not connected"
Jun 8 07:22:54 Manoj-Satis-iMac applepushserviced[125]: <APSCourier: 0x106741520>: Stream error occurred for <APSTCPStream: 0x107529760>: Error Domain=kCFErrorDomainCFNetwork Code=2 UserInfo=0x107318360 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)"
Jun 8 07:22:54 Manoj-Satis-iMac configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Jun 8 07:22:54 Manoj-Satis-iMac configd[13]: DHCP en1: INIT-REBOOT transmit failed
Jun 8 07:22:54 Manoj-Satis-iMac configd[13]: network configuration changed.
Jun 8 07:22:58 Manoj-Satis-iMac mDNSResponder[29]: DeregisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:E6CE:8FFF:FE5D:48C6)
Jun 8 07:22:58 Manoj-Satis-iMac configd[13]: Sleep: Success - AC - Software Sleep
Jun 8 07:22:58 Manoj-Satis-iMac configd[13]: Wake: Success - AC - EHC2
Jun 8 07:22:58 Manoj-Satis-iMac configd[13]: Hibernate Statistics
Jun 8 07:22:58 Manoj-Satis-iMac configd[13]: network configuration changed.
Jun 8 07:23:05 Manoj-Satis-iMac loginwindow[30]: loginwindow SleepWakeCallback WILL sleep
Jun 8 19:20:45 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:20:48 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:20:48 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:20:55 localhost fseventsd[34]: event logs in /.fseventsd out of sync with volume. destroying old logs. (319516 12 362581)
Jun 8 19:20:55 localhost fseventsd[34]: log dir: /.fseventsd getting new uuid: 42A22C99-8FAD-40F4-AC9A-8DE55586FDCF
Jun 8 19:20:55 localhost bootlog[41]: BOOT_TIME: 1339163443 0
Jun 8 19:20:58 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:20:58 localhost com.apple.usbmuxd[22]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
Jun 8 19:20:59 localhost configd[13]: Sleep: Success - AC
Jun 8 19:20:59 localhost configd[13]: Wake: Drivers Failure - AC - HDEF SATA
Jun 8 19:21:19 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:21:24 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:21:25 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:21:26 localhost bootlog[41]: BOOT_TIME: 1339163476 0
Jun 8 19:21:29 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:21:30 localhost com.apple.usbmuxd[22]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
Jun 8 19:21:56 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:22:01 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:22:02 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:22:03 localhost bootlog[41]: BOOT_TIME: 1339163515 0
Jun 8 19:22:06 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:22:33 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:22:38 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:22:39 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:22:40 localhost bootlog[41]: BOOT_TIME: 1339163552 0
Jun 8 19:22:43 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:22:44 localhost com.apple.usbmuxd[22]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
Jun 8 19:23:07 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:23:13 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:23:14 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:23:15 localhost bootlog[41]: BOOT_TIME: 1339163587 0
Jun 8 19:23:18 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:23:19 localhost com.apple.usbmuxd[22]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
Jun 8 19:23:46 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 8 19:23:51 localhost DirectoryService[15]: Improper shutdown detected
Jun 8 19:23:52 localhost blued[17]: Apple Bluetooth daemon started
Jun 8 19:23:53 localhost bootlog[41]: BOOT_TIME: 1339163625 0
Jun 8 19:23:54 localhost fseventsd[34]: event logs in /.fseventsd out of sync with volume. destroying old logs. (147 9 179)
Jun 8 19:23:54 localhost fseventsd[34]: log dir: /.fseventsd getting new uuid: 09B8A63F-56EF-4D9A-9E5C-A6D27EFCD26C
Jun 8 19:23:56 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Jun 8 19:25:04 localhost com.apple.kextd[9]: Safe boot mode detected; invalidating system extensions caches.
Jun 8 19:24:28 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***

Intel iMac wireless issues

I've had a 20" Intel iMac for over a year now and have never had very good success maintaining a connection to my network wirelessly. I have tried everything, but nothing fixes it permanently. It would just drop the network sporadically, especially if it hadn't been accessed in a day.
My DHCP is set up to lease IP's forever so that's not the problem.
I also have an Intel MacBook that I bought last summer. I've never had problems staying connected to the network with that (though it takes 30-40 seconds to reconnect from hibernation).
The odd thing is that even when the iMac was connected to the network the MacBook could never see it. Couldn't share itunes, couldn't connect to the shared drive, etc. It was almost as though the iMac was invisible to the network. Trust me, I've got no firewall, everything that can be shared is shared, it's as open as it can get (behind my secured router of course). Nothing.
Now, I've added an Apple TV to the mix. I had no problems getting it onto the network and the first time it found iTunes on the iMac and connected, synched, etc. I could stream video from it. All was good. For 1 day.
Then, day 2, nothing, can't find the iMac at all. Just says to make sure iTunes is open. It is, doesn't show the Apple TV in the devices either. I tried switching channels on the router, moving the apple tv around, stopping and restarting everything. Nothing. Wouldn't find it.
I finally got so frustrated (I had gotten the box out to send the apple tv back) that I grabbed a long network cable, plugged it into my router and ran it out the room, down the hall and plugged it into the iMac and disabled the airport card.
I brought up Safari, no problem. Tried iTunes and voila, there was the apple tv. Turned on the apple tv and bingo, there's my library.
I even went to my MacBook and there's the iMac on the network. Brought up iTunes and there's the shared library.
So, suffice it to say, there is a serious problem (and I've seen this posted over and over again) with the Airport cards in combination with the new Intel iMacs that does not seem to impact the Macbooks for some reason, at least not mine.
I guess I will leave it plugged into ethernet and try to hide the cable under the trim or something. I'm frustrated by this whole experience but I'm glad I found a way to get apple tv working.
Both my iMac and Macbook have all the latest software updates.

I've had a 20" Intel iMac for over a year now and have never had very good success maintaining a connection to my network wirelessly. I have tried everything, but nothing fixes it permanently. It would just drop the network sporadically, especially if it hadn't been accessed in a day.
My DHCP is set up to lease IP's forever so that's not the problem.
I also have an Intel MacBook that I bought last summer. I've never had problems staying connected to the network with that (though it takes 30-40 seconds to reconnect from hibernation).
The odd thing is that even when the iMac was connected to the network the MacBook could never see it. Couldn't share itunes, couldn't connect to the shared drive, etc. It was almost as though the iMac was invisible to the network. Trust me, I've got no firewall, everything that can be shared is shared, it's as open as it can get (behind my secured router of course). Nothing.
Now, I've added an Apple TV to the mix. I had no problems getting it onto the network and the first time it found iTunes on the iMac and connected, synched, etc. I could stream video from it. All was good. For 1 day.
Then, day 2, nothing, can't find the iMac at all. Just says to make sure iTunes is open. It is, doesn't show the Apple TV in the devices either. I tried switching channels on the router, moving the apple tv around, stopping and restarting everything. Nothing. Wouldn't find it.
I finally got so frustrated (I had gotten the box out to send the apple tv back) that I grabbed a long network cable, plugged it into my router and ran it out the room, down the hall and plugged it into the iMac and disabled the airport card.
I brought up Safari, no problem. Tried iTunes and voila, there was the apple tv. Turned on the apple tv and bingo, there's my library.
I even went to my MacBook and there's the iMac on the network. Brought up iTunes and there's the shared library.
So, suffice it to say, there is a serious problem (and I've seen this posted over and over again) with the Airport cards in combination with the new Intel iMacs that does not seem to impact the Macbooks for some reason, at least not mine.
I guess I will leave it plugged into ethernet and try to hide the cable under the trim or something. I'm frustrated by this whole experience but I'm glad I found a way to get apple tv working.
Both my iMac and Macbook have all the latest software updates.

Intel-iMac shuts down

Hello,
I have two very old iPod's that still work great and a new iTouch. I still have an old PowerBook G4 that works great. The only problems that I have are the fans always running very loud and it's very hot.
Anyways, I bought one of the first iMac G5's and it worked great for the first year. After that I had nothing, but problems. Very loud fan noise and it would always shut down even while just using Firefox. I was glad that Apple gave out an extended warranty on the iMac G5's. Of course they replaced the power supply and logic board a few times. I had to get Apple corporate involved and that's when they gave me a new intel-iMac.
I just hit the 2 year mark with my new intel-iMac. The computer has ran great, but now it shuts down on me for no reason. I don't have loud fan noise, but the case gets very hot! I hope it's not a hardware problem again. Could it be a software problem?
Below is my log file of the last crash:
Jul 13 19:01:27 localhost kernel[0]: hi mem tramps at 0xffe00000
Jul 13 19:01:28 localhost kernel[0]: PAE enabled
Jul 13 19:01:28 localhost kernel[0]: 64 bit mode enabled
Jul 13 19:01:28 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 13 19:01:28 localhost kernel[0]: vmpagebootstrap: 253712 free pages
Jul 13 19:01:28 localhost kernel[0]: migtable_maxdispl = 71
Jul 13 19:01:28 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 13 19:01:28 localhost kernel[0]: 89 prelinked modules
Jul 13 19:01:28 localhost kernel[0]: ACPI CA 20060421
Jul 13 19:01:28 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Jul 13 19:01:28 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jul 13 19:01:28 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jul 13 19:01:28 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 13 19:01:28 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 13 19:01:28 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Jul 13 19:01:28 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 13 19:01:28 localhost kernel[0]: Started CPU 01
Jul 13 19:01:28 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jul 13 19:01:28 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jul 13 19:01:28 localhost kernel[0]: Security auditing service present
Jul 13 19:01:28 localhost kernel[0]: BSM auditing present
Jul 13 19:01:28 localhost kernel[0]: disabled
Jul 13 19:01:28 localhost kernel[0]: rooting via boot-uuid from /chosen: E2A4D71C-2C5C-492B-81AA-FABDCA405647
Jul 13 19:01:28 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 13 19:01:28 localhost kernel[0]: USB caused wake event (EHCI)
Jul 13 19:01:28 localhost kernel[0]: USB caused wake event (EHCI)
Jul 13 19:01:28 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 001b63fffe8de00a; max speed s800.
Jul 13 19:01:28 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/WDC WD2500AAJS-40RYA0 Media/IOGUIDPartitionScheme/Customer@2
Jul 13 19:01:28 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jul 13 19:01:28 localhost kernel[0]: jnl: replay_journal: from: 3255296 to: 21396480 (joffset 0x7d01000)
Jul 13 19:01:28 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Jul 13 19:01:28 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Jul 13 19:01:28 localhost kernel[0]: CSRHIDTransitionDriver::stop
Jul 13 19:01:28 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Jul 13 19:01:28 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files
Jul 13 19:01:28 localhost kernel[0]: Jettisoning kernel linker.
Jul 13 19:01:28 localhost kernel[0]: Resetting IOCatalogue.
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Matching service count = 0
Jul 13 19:01:28 localhost kernel[0]: Previous Shutdown Cause: 0
Jul 13 19:01:28 localhost kernel[0]: BTCOEXIST on
Jul 13 19:01:28 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Jul 13 19:01:28 localhost kernel[0]: 4.170.46.9IPv6 packet filtering initialized, default to accept, logging disabled
Jul 13 19:01:27 localhost mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[31]: starting
Jul 13 19:01:27 localhost lookupd[40]: lookupd (version 369.8) starting - Mon Jul 13 19:01:27 2009
Jul 13 19:01:27 localhost memberd[39]: memberd starting up
Jul 13 19:01:28 localhost DirectoryService[44]: Launched version 2.1 (v353.6)
Jul 13 19:01:29 localhost usbmuxd[34]: usbmuxd-167 built for iTunesEightTwo on May 11 2009 at 13:36:48, running 32 bit
Jul 13 19:01:29 localhost diskarbitrationd[38]: disk0s2 hfs 64955A85-1720-3C08-B2FF-FF77C91746BC Macintosh HD /
Jul 13 19:01:29 localhost kernel[0]: yukon: Ethernet address 00:1b:63:96:01:17
Jul 13 19:01:29 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1c:b3:71:ae:a7
Jul 13 19:01:29 localhost lookupd[62]: lookupd (version 369.8) starting - Mon Jul 13 19:01:29 2009
Jul 13 19:01:29 localhost kernel[0]: Registering For 802.11 Events
Jul 13 19:01:29 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Jul 13 19:01:29 Shamu configd[36]: setting hostname to "Shamu.local"
Jul 13 19:01:30 Shamu kernel[0]: WLCE_COUNTRY_CODECHANGED
Jul 13 19:01:30 Shamu kernel[0]: en1: 802.11d country code set to 'US'.
Jul 13 19:01:30 Shamu kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Jul 13 19:01:31 Shamu kernel[0]: WLCE_COUNTRY_CODECHANGED
Jul 13 19:01:31 Shamu kernel[0]: en1: 802.11d country code set to 'X0'.
Jul 13 19:01:31 Shamu kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Jul 13 19:01:32 Shamu kernel[0]: Authentication Mismatch failure
Jul 13 19:01:32 Shamu mDNSResponder: Adding browse domain local.
Jul 13 19:01:33 Shamu kernel[0]: MAC AUTH succeeded
Jul 13 19:01:33 Shamu /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 13 19:01:34 Shamu loginwindow[67]: Login Window Started Security Agent
Jul 13 19:01:35 Shamu configd[36]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jul 13 19:01:35 Shamu configd[36]: posting notification com.apple.system.config.network_change
Jul 13 19:01:35 Shamu lookupd[77]: lookupd (version 369.8) starting - Mon Jul 13 19:01:35 2009
Jul 13 19:01:36 Shamu VersionCueCS2Daemon[155]: warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
Jul 13 19:01:37 Shamu configd[36]: target=enable-network: disabled
Jul 13 19:01:45 Shamu /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Currently connected to network 435E1
Thanks for your help!
Jason

Okay, started up my computer last night just for a few mins. It crashed again when just checking my e-mail.
Jul 18 23:17:39 Shamu kernel[0]: System Wake
Jul 18 23:17:39 Shamu kernel[0]: USB caused wake event (EHCI)
Jul 18 23:17:48 Shamu configd[36]: posting notification com.apple.system.config.network_change
Jul 18 23:17:48 Shamu launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[617]: exited abnormally: Hangup
Jul 18 23:17:50 Shamu kernel[0]: Authentication Mismatch failure
Jul 18 23:17:52 Shamu kernel[0]: MAC AUTH succeeded
Jul 18 23:17:53 Shamu mDNSResponder: Repeated transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FE71:AEA7); delaying packets by 5 seconds
Jul 18 23:17:54 Shamu lookupd[1092]: lookupd (version 369.8) starting - Sat Jul 18 23:17:54 2009
Jul 18 23:18:03 Shamu configd[36]: posting notification com.apple.system.config.network_change
Jul 18 23:18:03 Shamu lookupd[1096]: lookupd (version 369.8) starting - Sat Jul 18 23:18:03 2009
Jul 18 23:18:05 Shamu mDNSResponder: Repeated transitions for interface en1 (192.168.1.7); delaying packets by 5 seconds
Jul 18 23:20:56 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:21:00 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:21:08 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:21:20 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:21:39 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:21:56 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:22:02 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:22:06 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:22:10 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:22:14 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:22:58 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:23:16 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:23:53 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:24:04 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:24:23 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:34:03 Shamu kernel[0]: AirPort: Roam (Beacons Lost)
Jul 18 23:35:53 localhost kernel[0]: hi mem tramps at 0xffe00000
Jul 18 23:35:54 localhost kernel[0]: PAE enabled
Jul 18 23:35:54 localhost kernel[0]: 64 bit mode enabled
Jul 18 23:35:54 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 18 23:35:54 localhost kernel[0]: vmpagebootstrap: 253712 free pages
Jul 18 23:35:54 localhost kernel[0]: migtable_maxdispl = 71
Jul 18 23:35:54 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 18 23:35:54 localhost kernel[0]: 89 prelinked modules
Jul 18 23:35:54 localhost kernel[0]: ACPI CA 20060421
Jul 18 23:35:54 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Jul 18 23:35:54 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jul 18 23:35:54 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jul 18 23:35:54 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 18 23:35:54 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 18 23:35:54 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Jul 18 23:35:54 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 18 23:35:54 localhost kernel[0]: Started CPU 01
Jul 18 23:35:54 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jul 18 23:35:54 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jul 18 23:35:54 localhost kernel[0]: Security auditing service present
Jul 18 23:35:54 localhost kernel[0]: BSM auditing present
Jul 18 23:35:54 localhost kernel[0]: disabled
Jul 18 23:35:54 localhost kernel[0]: rooting via boot-uuid from /chosen: E2A4D71C-2C5C-492B-81AA-FABDCA405647
Jul 18 23:35:54 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 18 23:35:54 localhost kernel[0]: USB caused wake event (EHCI)
Jul 18 23:35:54 localhost kernel[0]: USB caused wake event (EHCI)
Jul 18 23:35:54 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 001b63fffe8de00a; max speed s800.
Jul 18 23:35:54 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/WDC WD2500AAJS-40RYA0 Media/IOGUIDPartitionScheme/Customer@2
Jul 18 23:35:54 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jul 18 23:35:54 localhost kernel[0]: jnl: replay_journal: from: 8706048 to: 16946176 (joffset 0x7d01000)
Jul 18 23:35:54 localhost kernel[0]: HFS: Removed 7 orphaned unlinked files
Jul 18 23:35:54 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Jul 18 23:35:54 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Jul 18 23:35:54 localhost kernel[0]: Jettisoning kernel linker.
Jul 18 23:35:54 localhost kernel[0]: Resetting IOCatalogue.
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Matching service count = 0
Jul 18 23:35:54 localhost kernel[0]: Previous Shutdown Cause: 0
Jul 18 23:35:54 localhost kernel[0]: CSRHIDTransitionDriver::stop
Jul 18 23:35:54 localhost kernel[0]: BTCOEXIST on
Jul 18 23:35:54 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Jul 18 23:35:54 localhost kernel[0]: 4.170.46.9IOBluetoothHCIController::start Idle Timer Stopped
Jul 18 23:35:54 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jul 18 23:35:53 localhost memberd[40]: memberd starting up
Jul 18 23:35:53 localhost mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[31]: starting
Jul 18 23:35:53 localhost lookupd[41]: lookupd (version 369.8) starting - Sat Jul 18 23:35:53 2009
Jul 18 23:35:53 localhost DirectoryService[44]: Launched version 2.1 (v353.6)
Jul 18 23:35:55 localhost usbmuxd[34]: usbmuxd-167 built for iTunesEightTwo on May 11 2009 at 13:36:48, running 32 bit
Jul 18 23:35:55 localhost kernel[0]: yukon: Ethernet address 00:1b:63:96:01:17
Jul 18 23:35:55 localhost diskarbitrationd[39]: disk0s2 hfs 64955A85-1720-3C08-B2FF-FF77C91746BC Macintosh HD /
Jul 18 23:35:55 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1c:b3:71:ae:a7
Jul 18 23:35:55 localhost lookupd[62]: lookupd (version 369.8) starting - Sat Jul 18 23:35:55 2009
Jul 18 23:35:55 localhost kernel[0]: Registering For 802.11 Events
Jul 18 23:35:55 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Jul 18 23:35:55 Shamu configd[37]: setting hostname to "Shamu.local"
Jul 18 23:35:56 Shamu kernel[0]: WLCE_COUNTRY_CODECHANGED
Jul 18 23:35:56 Shamu kernel[0]: en1: 802.11d country code set to 'US'.
Jul 18 23:35:56 Shamu kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Jul 18 23:35:57 Shamu kernel[0]: WLCE_COUNTRY_CODECHANGED
Jul 18 23:35:57 Shamu kernel[0]: en1: 802.11d country code set to 'X0'.
Jul 18 23:35:57 Shamu kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Jul 18 23:35:58 Shamu kernel[0]: Authentication Mismatch failure
Jul 18 23:35:58 Shamu mDNSResponder: Adding browse domain local.
Jul 18 23:36:00 Shamu kernel[0]: MAC AUTH succeeded
Jul 18 23:36:00 Shamu /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 18 23:36:00 Shamu loginwindow[67]: Login Window Started Security Agent
Jul 18 23:36:01 Shamu configd[37]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jul 18 23:36:01 Shamu configd[37]: posting notification com.apple.system.config.network_change
Jul 18 23:36:01 Shamu lookupd[77]: lookupd (version 369.8) starting - Sat Jul 18 23:36:01 2009
Jul 18 23:36:02 Shamu configd[37]: target=enable-network: disabled
Jul 18 23:36:02 Shamu VersionCueCS2Daemon[162]: warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
Jul 18 23:36:17 Shamu /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Currently connected to network 435E1
Thanks for any help,
Jason

How do I get my iPhoto library from a ppc g5 to an intel iMac mid 2011

How do I get my Iphoto library from a ppc g5 to an intel imac mid 2011?

I recommend tha tyou do not use migration assistant - it has a poor record of moving the iPhoto library successfully
Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

HP Color LaserJet Problems with intel iMac

Can anyone give me advice on the following:-
When I try to print from my wife's new intel iMac 20" to our HP Color LaserJet 2550L, it doesn't work and print center gives me the following error message ... "The process "hppostprocessing" terminated unexpectedly on signal 5" .
The printer is connected directly to the iMac via USB. It's not on a network.
I ran the HP Color LaserJet installer from the original CD that came with the printer and when that didn't work I downloaded another (latest) Color LaserJet installer (dated 2004) from the HP website. Still getting the same error message from PrintCenter.
When I look at the HP installer log, it appears that the installer tried several times without success to install plugins into the PPD folder (HD->Library->Printers->PPD).
After trying installation and checking out my PPD folder (above) there is nothing in it.
This printer has been (still) working fine with our older 20inch iMac.
Any advice or suggestions would be appreciated.

Same happened with my photosnart. Here is part of the email from HP
Thank you for contacting HP Total Care.
I understand from your email that you are not able to print to your
photosmart 1218 printer from your new imac.
I believe you are correct when you mention the glitch between the new
Intel processor in the iMac.
I have checked the Apple website and noted the pre-installed printer
drivers that ship with this operating system, do NOT include drivers for
the Photosmart 1218 printer. There are Gimp print drivers available for
the Photosmart P1000 printer. They may work, but provide only basic
printer functionality. (see the Apple document listed below).
http://docs.info.apple.com/article.html?artnum=303057#hpdrivers
I understand that our engineers are investigating the driver issue with
the Intel-based Macs, however, I cannot provide you with an expected
date of resolution. Your printer was manufactured in 2000, and the most
recent drivers are from Aug 2005. These drivers were created before the
Intel based macs were available.

Kernel Panic with Netboot Across Subnet Intel iMac

I have a problem with trying to netboot a intel iMac across the subnet. It connects up goes to the spinning globe then the spinning globe stops spinning and I get a kernel panic.
I've tested that the mac can netboot in the same subnet as the netboot server. But I've got no idea why it's getting a kernel panic when trying to netboot across the subnet.
I'm using bombichs NBAS version 1.2
OS X 10.4.6 Server on the netboot server
I've created the intel netboot image via the updated 10.4.6 "System Image Utility" and have enabled it via Server Admin.
Here is the log I get after the restart.
============================================
panic(cpu 0 caller 0x002B7C75): nfsbootgetfh(v2,UDP) failed with 2
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x1396b994 : 0x128b5e (0x3bbeb8 0x1396b9b8 0x131bbc 0x0)
0x1396b9d4 : 0x2b7c75 (0x3d3fb0 0x2 0x0 0x2)
0x1396bdb4 : 0x2d027a (0x120a358 0x24a9c00 0xc 0x10)
0x1396bea4 : 0x1c6e6c (0x1 0x23b20c0 0x2466420 0x2486e00)
0x1396bee4 : 0x3111ab (0x23584c0 0x1 0x1396bf98 0x20)
0x1396bfb4 : 0x136e86 (0x0 0x7 0xfffff7ff 0x4a1000)
0x1396bfd4 : 0x197a21 (0x0 0xffffffff 0x4461f8 0x4a1000) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.6.1: Tue Mar 7 16:55:45 PST 2006; root:xnu-792.9.22.obj~1/RELEASE_I386
Model: iMac4,1, BootROM IM41.0039.B00, 2 processors, Intel Core Duo, 1.83 GHz, 1 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
Memory Module: DIMM1/BANK 1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x89), 103.2 (3.120.28.3)
Bluetooth: Version 1.7.3f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1600JS-40NGB2, 149.05 GB
Parallel ATA Device: PIONEER DVD-RW DVR-K05
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
Hope someone can help me with this problem
Cheers,
Berry

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Old ibook connected to Airport extreme on Intel iMac looses internet.

For the third time in a year since I got my new iMac Intel Core Duo machine the wireless connection between it and my old 2001 ibook (with and external USB --afterthemac.com) wireless device has lost the internet connection for the ibook. I am using the iMac as a airport base station with my iBook and it has worked flawlessly for most of the time since Feb when I got my new iBook but this is now the third time (for no apparent obvious reason to me) that while the System Preferences for the USB wireless device show a 70-75 strength connection via airport my internet (entourage email, safari browser) and wireless printing are all dead.
The last two times it happened I did a permissions fix on the iBook (nothing happened) and then reinstalled the driver for the USB wireless dongle. And I got the internet and printing through the printer on my iMac back. This did not work this time. I am set to Automatic in my Network preferences and am using use DCHP and have an ip address and such that are dynamically assigned. -- that still shows.
I have also rebooted my iMac, stopped and restarted airport on my iMac "base station" (afer a minute) and still no internet but the system preferences still show a wireless connection. I have run out of ideas to connect and wonder what else I a missing but some sites I have looked talk about the mysterious loss of inernet (while wireless appears to be working fine).
What is really weird is I also tested a Zen-Cart-MySQL server running on my localnet of my iMac and I actually got a connection of sorts by my ibook (once) today. It displayed the text portion of my Zen-Cart test screen but no graphics -- did not work next time. So it appears I almost have a connection of sorts with my iMac from my iBook but definately not an internet connection.
One final note, my new Intel iMac is connected to my cable modem via an old Netgear router (which is working fine for the iMac). I do not suspect there is any reason for this to be the problem since the ibook is using the shared connection of the iMac. But thought I would mention.
The ibook as I mentioned is the old 2001 dual USB model (white) it has only about 400 MB ram, a 10GB HD (but works great for email and web browsing for my wife). It has OS X 10.4.4, I have not bothered upgrading it any further because the HD has only about 2 GB of space free and other than this now third time of losing the internet connection it has worked fine and I hate to mess up this email/web machine my wife uses.
So if anyone has ideas of where I can go next to troubleshoot I would appreciate it.
Thanks
Russ Jacobson
[email protected]

Ok appears I solved my problem but not sure why.
While I was posting this around I stumbled on a solution so my question is why. I read somehwere about rebooting the router even thoug it is connected to the iMac and my internet works fine there. Well I rebooted that and the internet for my ibook came back instantly. So since the ibook is sharing the imac connection to my cable modem via rouer using the airport on the iMac why would the router block my iBook and not iMac that is directly wired to the old router (it is not a wireless router)
I want to learn why this now works so I can deal with it more effectively in future.
Thanks,
Russ Jacobson

Intel iMacs and AirTunes (or possibly iTunes 6.0.3)

Are there any other Intel iMac users who are having problems playing music to remote speakers using iTunes 6.0.3 on 10.4.5?
Everything works fine for about 10 minutes then the music suddenly drops out. No error messages, no attempt to reconnect, nothing. My girlfriend can play music from her PowerBook (using iTunes 6.0.2 on 10.4.4) all day long without a hiccup, despite being further from the base station and usually getting a much weaker signal.
Amusingly I can play my shared iTunes playlists through the PowerBook to the remote speakers without any trouble.
I thought that my network setup might be at fault so I've tried turning off mixed b/g support, changing to WDS rather than having the AE join my existing network, turning on interface robustness, etc all to no effect.
Has anyone else got the same problem?

It looks like this is related to the problems people are having with AirPort networks on the new iMacs.
See http://discussions.apple.com/thread.jspa?threadID=339752 for more info.

Network Intel iMac to G3 DV400

Similar Messages

Maybe you are looking for