Network Interruption when Laptop connects

Hello All
- I have WRT54G V5 with firmware 1.00.6 connects to ADSL Sagem modem
- 1 PC with Sitecom network adapter running on WIN XP Pro connect to Router through WAN
- 1 vaio laptop with builtin Intel(R) PRO/Wireless 2200BG version 9.0.4.17 running on WIN Home connect to Router though WAN
The problem occures while I have my pc connected to the router, when I try to connect my laptop to the router the whole network iterrupts and it connects back automatically.
So I am confused why this interruption on the network when i try to connect my laptop to it. The connection goes back to normal when both PC and Laptop reconnect to the network.
I'll be glad to provide more info about the situation, but maybe someone could fill me up on why this is happening.
I have tried manual DHCP and automatic and still the same problem.Message Edited by ZinG on 08-21-2006 03:55 PM

jj21
Don't think it is the router's problem.
I've just found this symptom on Intel's website.
http://support.intel.com/support/wireless/wlan/sb/cs-022509.htm
But I am not sure if it applies to your Laptop, since it has a different Intel Pro Wireless version. But you can probably tell it is a laptop problem since it only occues from the laptop and not from any other Computers you try to connect.
Maybe I am wrong but you can tell us what is your Wifi adapter on your Laptop?

Similar Messages

  • Xbox disconnects when laptop connects to network

    My Xbox 360 disconnects from the network everytime my laptop connects. I have static IP on my 360 and automatic IP on my laptop.
    I tried putting my Xbox on automatic, still didnt work.
    I tried putting my laptop to manual - it worked but I can't leave it like this because I connect to different networks (school, home, work, etc).
    Other computers/consoles dont get disconnected when I connect with my laptop.
    Can anyone help me out? Thanks!

    As you are already using static Ip on X-BOX, forward ports 88 & 3074 for the same Ip
    Also try this setting:
    Channel – 1or 11
    Beacon interval – 75
    RTS & fragmentation threshold – 2306

  • Error 6035 when laptop connected to TV

    Has anyone else on here experienced the error message 6035 when trying to watch BT SPORT whith the Laptop connected to a TV? I am using Win 7

    Hi villafan,
    Welcome and thanks for posting. Did you get this sorted? You'll find some imformation on error codes on the sticky at the top of this board. Let us know if that helps.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Added second laptop to home network and first laptop connection GONE

    Help! I have a WRT54G2 v1.5 wireless-G broadban router set up on my hard-wired computer (XP) and had my new Sony Vaio laptop (Windows 7) connected wirelessly. Everything worked great! Then, yesterday, I added a Dell laptop to the network and my Sony got kicked off the network. I have tried to "add a device" but when I click on the link to do that from Network Magic, I get an error page on the Internet. I saw that someone else had a connection problem so I read the answer posted to their question and clicked on the link and again, get an Internet error. I am connected to the Internet: I checked! What is going on? I need the Dell laptop on the network as it is my new laptop for my job. Help! 

    Let mw know the model number of router …also tell me the Operating system on laptop.

  • Hub Resetting only when Laptop connected

    Hi,
    I would be grateful for any pointers or advice on how to solve or track down the following problem.
    I have a BT Business Hub which is connected by cable to a desktop PC and by wireless to two laptops.
    ( The laptops are only very occasionally used at the same time as the desktop, which is my main machine
    and is used virtually all day)
    Up until recently all three computers could be connected to the Internet without any issues, but
    recently when one of the laptops is in use ( and it's always the same laptop ), my business Hub
    resets itself and the connection is lost before being re-establised.
    Odd as it sounds, this only happens occasionally, but as far as I can work out, only when the
    troublesome laptop ( which is otherwise operating fine) is in use and connected to the Internet.
    I could be going off on the wrong track, but would the laptop in question be capable of sending data
    to the hub which would cause the hub to reset? And if so, what can I do to detect the problem?
    Apologies for the vagueness of this query, as I am slightly confused as to what might be going on.
    Thanks
    DL

    See if anything here helps, especially the speed or encryption settings.
    Wireless Help
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Poor Lightroom 4.4 performance when laptop connected to an external monitor

    Hello everyone,
    I have recently purchased an external monitor JUST to be able to edit my photos at a higher resolution (1920*1080). However, Lightroom performance is extremely bad and the sliders and crop tool are all laggy when I just connect the monitor that I have bought . Doing the same task on my laptop monitor takes much less time and runs perfectly smooth (the resolution of the laptop is 1366*768).
    Is this an issue with Lightroom 4.4 or is it my because my laptop is not fast enough?
    Here is some more information about my system specs:
    The Lightroom version is 4.4 and I have a laptop with 8 GB ram, a 2.4 GHz Intel Core i5 CPU, the GPU is Radeon HD 5650.
    My OS is Windows 7 64 bit and the connection to the monitor is via a VGA cable
    I just want to use the external monitor (single display) so I use it as a projector and I do not extend the displays. I just wanted to edit my photos with a higher resolution monitor so that I see the editing flaws in them more easily.
    Please help me if you know how to deal with this because otherwise I have to return the monitor because it's of no use.

    The higher resolution is pushing you to the next higher rendering resolution.  If you are in Develop and set zoom position to 1:4 or 1:8 it should speed back up (each level is 4 times as fast as tge previous).

  • Wireless Network Crashing When IPod Connected

    Why would my wireless network (TimeCapsule) crash each and every time an iPod is turned on and tries to connect to the wireless network? 
    I normally have two laptops Cat5'd to the LAN and one iPad connected to the wireless network.
    Your comments are appreciated,
    John

    Hi oNewton,
    Thanks for visiting Apple Support Communities.
    It's difficult to say why your Time Capsule is exhibiting this behavior, and it is definitely unexpected.
    As a starting point for troubleshooting, I recommend resetting the Time Capsule using the steps in this article:
    Resetting an AirPort base station FAQ
    All the best,
    Jeremy

  • Airport Extreme Intermittent Network Interruption when Downloading Large Amounts of Data.

    I've had an Airport Extreme Base Station for about 2.5 years and have had no problems until the last 6 months.  I have my iMac and a PC directly connected through ethernet and another PC connected wirelessly.  I occasionally need to download very large data files that max out my download connection speed at about 2.5Mbs.  During these downloads, my entire network loses connection to the internet intermittently for between 2 and 8 seconds with a separation between connection losses at around 20-30 seconds each.  This includes the hard wired machines.  I've tested a download with a direct connection to my cable modem without incident.  The base station is causing the problem.  I've attempted to reset the Base Station with good results after reset, but then the problem simply returns after a while.  I've updated the firmware to latest version with no change. 
    Can anyone help me with the cause of the connection loss and a method of preventing it?  THIS IS NOT A WIRELESS PROBLEM.  I believe it has to do with the massive amount of data being handled.  Any help would be appreciated.

    Ok, did some more sniffing around and found this thread.
    https://discussions.apple.com/thread/2508959?start=0&tstart=0
    It seems that the AEBS has had a serious flaw for the last 6 years that Apple has been unable to address adequately.  Here is a portion of the log file.  It simply repeats the same log entries over and over.
    Mar 07 21:25:17
    Severity:5
    Associated with station 58:55:ca:c7:c2:ae
    Mar 07 21:25:17
    Severity:5
    Installed unicast CCMP key for supplicant 58:55:ca:c7:c2:ae
    Mar 07 21:26:17
    Severity:5
    Disassociated with station 58:55:ca:c7:c2:ae
    Mar 07 21:26:17
    Severity:5
    Rotated CCMP group key.
    Mar 07 21:30:43
    Severity:5
    Rotated CCMP group key.
    Mar 07 21:36:41
    Severity:5
    Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
    Mar 07 21:55:08
    Severity:5
    Associated with station 58:55:ca:c7:c2:ae
    Mar 07 21:55:08
    Severity:5
    Installed unicast CCMP key for supplicant 58:55:ca:c7:c2:ae
    Mar 07 21:55:32
    Severity:5
    Disassociated with station 58:55:ca:c7:c2:ae
    Mar 07 21:55:33
    Severity:5
    Rotated CCMP group key.
    Mar 07 21:59:47
    Severity:5
    Rotated CCMP group key.
    Mar 07 22:24:53
    Severity:5
    Associated with station 58:55:ca:c7:c2:ae
    Mar 07 22:24:53
    Severity:5
    Installed unicast CCMP key for supplicant 58:55:ca:c7:c2:ae
    Mar 07 22:25:18
    Severity:5
    Disassociated with station 58:55:ca:c7:c2:ae
    Mar 07 22:25:18
    Severity:5
    Rotated CCMP group key.
    Mar 07 22:30:43
    Severity:5
    Rotated CCMP group key.
    Mar 07 22:36:42
    Severity:5
    Clock synchronized to network time server time.apple.com (adjusted -1 seconds).
    Mar 07 22:54:37
    Severity:5
    Associated with station 58:55:ca:c7:c2:ae
    Mar 07 22:54:37
    Severity:5
    Installed unicast CCMP key for supplicant 58:55:ca:c7:c2:ae
    Anyone have any ideas why this is happening?

  • TM tries to backup network drives when I connect to them

    I noticed TM started a backup of a couple shared drives on my iMac. TM is running on my MacBook and I don't want it to back up drives I connect to - either over the network or firewire/USB. I can't figure out how to stop this. I connect to quite a few shared drives in my network and this is a problem for me. All I want to back up is my internal drive.

    In the timemachine preferences click on the options button, click the plus sign and you can add the volumes, folders or files you dont want timemachine to backup.

  • My network drops when I connect the phone to it.

    I connect the phone to my network, or even my works network, and I get an ip conflict and brings the network down.  Thoughts?  Solutions?

    Are you using a static IP addressing on the phone?

  • Repeatedly prompted for a wifi network when already connected (iPad Air 2 / iOS 8.1.3)

    Hey there
    Subject says it all: since the iOS 8.1.3 update on my new iPad Air2 Wifi/GSM 128GB, I keep being prompted to choose a wifi network even when already connected to my home network or tethering on my iPhone. It's quite a pain to type a mail when I have to stop every few seconds to answer or cancel this stupid prompt window.
    Oddly enough, it works all right on my iPhone (otherwise, I'd use 4G).
    Anyone's got a nice trick to end that issue? Thanks in advance.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  • Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

    I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

    Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

  • Why is my Ipad2 not connecting to my network when phone and laptop connect successfully?

    Why is my Ipad 2 not connecting to my network when phone and laptop connect immediately?

    Could be all sorts of reasons, Can you give us more details about your setup?
    Check to see if the wifi is turned on the the iPad. That would be the first thing I would check.
    Next what is the configuration of your network? Do you have a password setup to prevent others from connecting to your network? Any details you can provide will make it easier to figure out where your probem is.
    Paul

  • Loss of connectivity of a wireless network when more than one laptop connects to the internet.

    Hi,  I have a wired network of 20 computers controlled by a net gear wired router from a DSL modem. The router is plugged into a hub. I have a linksys router WRT54GX4 which is plugged into the hub to allow wireless internet access. The DHCP has been disabled on the wireless router. I have added three access points WAP54G which are plugged into the wired network in outer rooms to expand the wireless network. The wireless network works just fine with only one laptop connected to the internet but when two laptops connect they both lose connectivity. That is my problem. Does anyone have any suggestions? The IP address of the wired router is 192.168.2.1, the IP address of the wireless router is 192.168.2.3, the IP address of the access points are 192.168.2.245, 192.168.2.246, 192.168.2.247. All the devices are on channel 11. All have the same SSID. The default gateway on the access points is 192.168.2.1. It is an unsecured network. Please help.  Thanks   Peter Z

    Hi MnM Show,
    Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
    network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
    This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
    will be disabled from Cluster use. This network should set to lowest in the binding order.
    The related article:
    Configuring Windows Failover Cluster Networks
    http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

    Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
    It does not recognise my old connection.
    Same case with wifi connection as well.
    Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
    But before it use to display my name now it is coming as Apple I-phone.
    Anyone who can help on this, how to get it resolved.
    - I have update my phone with backup (OLD version of IOS) but issue still presists.
    This is the same issue somone mention on below.
    http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
    Kind Regards
    @ru..

    If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

Maybe you are looking for