Network is lost when using GPS on 3GS

Network is lost when using GPS on 3GS.
ver. 5.1.1 (9В206)
model MC637RR
SN 86223J1DEDG
05.16.05.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Similar Messages

IPhone 5 network lost when using gps

Is it something wrong with particular network sim card or hardware/software/apps related problems?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

IPhone 5 data network stops working when using GPS

Hello,
I have a strange problem for some time now. The DATA connection in GPS apps stop working when navigating. When I use Google maps or WAZE apps the first time after rebooting the device, everything is working just fine for first address search, but after beginning the navigation, DATA network disappears only for the navigation app, browsing is working just fine (a bit slowly, but fine).
Tried to factory reset the device few times, and changed the carrier provider, didn't help
Any ideas???

Hi liokap,
Welcome to the Apple Support Communities!
I know that it can be frustrating when applications you downloaded from the App Store do not function as expected. In this situation, I would recommend working through the troubleshooting steps in the attached article.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Have a great day,
Joe

Cellular signal lost when using gps related apps

Everytime I wanted to open a MAPS apps, the cellular signal will immediately dropped and after few seconds it will LOST (the "searching..." will appear). I have tried using other sim from different service provider but same problem. Anything to do with the antenna or gps hardware? or maybe software or settings related matter? if any diagnostic application such as the "field test mode" that I can try please let me know.
Thanks in advance.

To rule out a software issue try a reset first. Press the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting. If this does not work, set it up as new device without using the latest backup, explained in this article:
iOS: How to back up your data and set up your device as a new device
If still no luck, the problem might be hardware related and the phone has to be checked:
iPhone - Contact Support - Apple Support

HOW TO KEEP SCREEN ON WHEN USING GPS OR SHOOTING THE VIDEO

I was wondering if there any setting I could leave the screen on when using GPS or shooting the video, I'm currently set backlight timeout is 2 mins. After 2 mins device will automatically out and I have to reenter the password for continue my video, This is very inconvenience when using GPS or shooting the video.
Is there any one out there can assist? thanks in advance.

Did you get an answer?

PHONE OVERHEATS WHEN USING GPS

If I use gps for long periods of time plugged in to car charger (have to charger while using gps battery drains quickly)the phone gets so hot you have trouble even holding the phones.Is this a GB issue

My phone gets warm when using the GPS in the car dock. This has happened since I bought it on launch day (Before Froyo). It seems to get a little warmer after Gingerbread, but its also summer here and the phone gets pretty warm (38-41C) during my hour long drive to/from work. When I use the speedometer, the temps stay cooler.
When you are using GPS, you are not only proccess lots of data through the display, but also using the CDMA radio quite a bit. If/when Google gets their act together and allow downloading of routes/maps to navigate with, you will see the tempetures go down. Until then, prolong use of GPS will warm the phone up.
In the winter, the phone is cooler.
Its normal for a computer processor to get warm during heavy use. Gingerbread does use more processor power than Froyo, so the phone is warmer than it was with Froyo. Nature of the beast.

My New iphone 5s gets hot quickly when using GPS and downloading apps/movies. Is this normal? My Iphone 5 never did that!

I Have had my IPhone 5s for less than a month and have noticed that it gets very hot while downloading apps/movies and while using GPS. (not at the same time) Battery life is also disappointing! Normal?? My 5 never had this problem!

Hi anthonym73,
If you are having an issue with your iPhone getting hot you may want to read this article for some guidance -
Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures
Thanks for using Apple Support Communities.
Best,
Brett L

First words are lost when using Bluetooth voice de...

This happens with any Nokia Nxx or Exx when used with bluetooth HF device, like Nokia HF-300. Is there any solution to this problem? In practice you can hardly use any navigation with bluetooth voice. The delay itself is not a problem but the phone should wait 0.x seconds after opening the line to the HF device. It would be nice if you could configure this kind of delay to the phone.

Is this the case when listening to the radio or music from the phone?
I'd expect it to pick everything up when listening to music from the phone as it's on the same channel (A2DP).
But if you're getting all the nav guidance with a radio mute then that is a huge step forward.
Usually the problem occurs when there is a delay for the mute of the radio followed by the streaming over mono channel.
Message Edited by confiture on 18-May-2009 08:56 PM

NO MAPS OR A PICTURE WHEN USING GPS

Bassically when i try and use my gps theres no picture(just a white screen) and two flashing arrow type fonts in the top right hand corner of the phone the sattelite @ the bottom of the right hand side of the screen has a red cross over it,please can someone explain whats happening and tell me what to do.
Thanks
steve nicholas
uk.

Hi turbo
Firstly the "two flashing arrow type font" means that A-GPS=Assisted GPS is enabled and using an active network connection. "Red Cross" means that satellite lock-on has not yet been achieved.
Go outside awy from high buildings and trees with view of open sky, hold phone with keypad slider open at 45 degrees, don't cover the "#" key as GPS antenna is below this.
Go to Menu > Tools > Settings > GPS data > Position > Open > Options > Satellite status > Open:
You need a minimum of three solid black bars, but usually get four for lock-on position.
If empty rectangles haven't turned to solid bars by 20 mins your GPS isn't working!
Now that you've determined GPS is working Open Maps application - at first there is RED CROSS on satellite icon at bottom right - this disappears when GPS locked-on
Close application and you see "saving data" above globe on screen. This creates folder structure on memory card that Maploader requires.
Happy to have helped forum in a small way with a Support Ratio = 37.0

HELP! how can i find my lost 8530 using GPS?

not sure if it was stolen, or just not returned yet but it seems to be turned off. Any way to find it??

Hello Elka!
Welcome to the Community
We're sorry for what happened to your phone. I don't think GPS can help you find the phone because if you called your carrier to report it lost or stolen, it must have been suspended already. IF it's not been suspended, it must have been turned OFF by the founder.
Blackberry Curve 8530 only has A-GPS, it means Assisted GPS so it may only be assisted by the Carrier Network find its nearest Cell Tower. If the phone is suspended or turned OFF, it will not work because it needs a Mobile Network to connect to. And if there's an app such as Blackberry Protect intalled on the phone, it may help you find the location but not the exact location as it only has A-GPS functionality. And for further details about Cell Tower's coverage. Rural Cell Towers have a larger radius compared to an Urban Cell Towers so if it was brought to a Rural area, using A-GPS might give you a place miles away from the exact location of the phone.
Hope the information above has helped in a way.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Unable To See Network Drive from outside Home Network..even when using DynDNS

Hi
I have just got a Freecom Media storage Network Center which I have attached to my WRT150N router.
I am attemting to permit access to authorised users to files on the drive via the internet (presumably via ftp).
Here is what I have done:
Swiitched on DynDNS on the web admin page in the router (used DynDNS.com free service.
Obtained a user addess which is middle-earth.dyndns-home.com from DynDNS, which is linked to my Virgin Media IP
Switched on Port Range forwarding with
Ports 20-21 as ftp
Port 80 as http
Port 57 as DNS
Selected "both protocols"
Set the IP address to route to 192.168.1.42 - (this is the IP address which the web based software for the Network Drive reports as.
However the configuration of the TCP/IP protocol in PC attached by LAN cable to the router is "Obtain an IP address automatically" (i.e. dynamic?). If I change these settings and specify static IP addresses   will I not muck up internet connection to Virgin Media.
what I was hoping to acheive was typing     ftp:// middle-earth.dyndns-home.com
in the address bar would let me see the network drive from anywhere!
I have tried using DNS pinging on Ports 20, and 21 but that tells my ports are closed. i have also tried switching off my software firewall (Kaspersky) and the router firewall, but this does nothing.
What have I done wrong or no done!!
Thanks

I think the problem is solved.
The Freecom device needs to use a different part of its interface to be assigned a static IP address, which I have now done. At my last try it was visible from two independent views outside of my network.
On another front, I am appalled at Linksys or Cisco, who are not prepared to advice on getting more from their produicts if they are 'out of warranty'. The online chat tech said I could ring an 0871 premium line number in the UK. When I rang that, I was told as tthat as my unit is not faulty and was out of warranty I would have to use their pay per incident service.
That is not a way to deal with customers. When it comes to upgrading or replacing network equipment, I will look to a provider who is interested in their customers.

HT1338 network become slow when using bluetooth.

I am using macbook pro retina display, my issue is, every time I turn my bluetooth on, the network become slow. anyone facing a same problem?

A lot of people were experiencing the same thing and reported it on the MacBook Pro forum. But that was when the rMBP first came out and I thought that the issue had been resolved with software/firmware(?) updates.
Are you running the very latest build of 10.8.2? With the supplemental updates as well?
Clinton

Text content lost when using attachments. iPhone 4 (iOS 5.1.1)

When I want to add pictures to an email attachment in my iPhone 4, I usually use the Gallery App which gives me the option of sharing them in an email. When the pictures are added to the email, they are added in the body of the email. You have the option of adding text above, between, or below any pictures that you have added. However, when the email is sent and delivered to the recipient, all text between and below any pictures has been stipped away! Very Frustrating!
Am I doing something wrong or is this just a massive bug?

Lawrence,
Thanks for your reply. Good tip, I will check each app.
To clarify the problem I am having, I use the app named DataMan to monitor my cellular data usage, and it has a screen where it can show on an hour by hour basis which app is using data. I am seeing "Push Service" listed as using 1-5 megabytes every once in a while. I have a 200 MB data plan and this is very adequate for my own usage which is light (no streaming). I have noticed my data usage is higher than ever and the culprit appears to be the Push Service. I have actually reduced my own usage.
Thanks again,
Maurice

Z3 Dual / signal lost when using two SIMS

Dear All,
My brand new Z3 Dual keep losing signal when enabling two SIMs at the same time, this will not happen if I disable one SIM and used the other one only which defies the purpose of using a DUAL SIM cell phone, please advise !

Hi,
Have you tried to switch place on the SIM-cards to see if same thing happens? Or do you have the possibility to try other SIM-cards?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HttpSession lost when using browser - Apache - oc4j

Hi,
config: browser <-> Apache <-> oc4j using ProxyPass & ProxyPassReverse directives.
problem:
- A servlet calls HttpSession.putValue("Key","some data"), then redirect to B servlet.
- B servlet tries to HttpSession.getValue("Key"), but it return null.
.putValue & .getValue are OK when config is browser <-> oc4j.
Can anybody help me?
Kenny.

Can you tell us whether you are using cookies or URL rewriting to do session tracking ? Hi Debabrata,
I use cookies to do the tracking. Also, same thing happened when I use NT version of Apache & NT version of OC4j.
Kenny.

Network is lost when using GPS on 3GS

Similar Messages

Maybe you are looking for