Network issues connecting Tiger to os9
I am having an issue trying to connect a Tiger 10.4.3 computer to a OS 9.2.2, it is giving me an afp protocol error
Connection Failed
This file server uses an incompatible version of the AFP protocol. You cannot connect to it.
Can anyone assist me with this issue.
Thank You,
Joe
Hi Joe,
Welcome to the Discussions. I was having the same problem myself. To compound my problem the OS 9 computer had no other means of getting the files off of it. No CD-R/RW drive and no FireWire. (If your OS 9 machine has FireWire I would highly suggest using FireWire Target Disk Mode as its a lot easier.)
What I eventually came to do, though was to boot my Tige machine from my OS 9 install CD. (Put CD in tray and hold down the C key on startup). This will boot your Tiger machine from OS 9. From there you can select Chooser from the Apple menu and as long as file sharing is enabled on your other machine, the two computers will talk to each other easily.
Hope this helps.
Similar Messages
-
Slow start up of iTunes 10.6 on Windows 7 & Network issues connecting iPhone via WiFi
Ever since I updated to iTunes 10.6 and iOS 5.1 both my computer don't want to open iTunes quickly and my Phone doesn't get noticed on iTunes via WiFi on my network. When I go to start iTunes from the icon on my desktop it doesn't pop up on screen right away like it did on the version before 10.6 and on iOS 5.0.1 my phone would sync and connect on to iTunes to update apps just fine now all that has changed. Doesn't want to connect to update apps on my network via WiFi and I have tried a few different things to see if I could correct the issue but nothing has worked. I tried what another person posted to try and it did not work, I also uninstalled, rebooted computer and reinstalled iTunes but that did not work either. Nothing I have tried seems to work, it must be a Apple glitch in the software for Windows 7 to have iTunes 10.6 and iOS 5.1 not to work properly like it should as it once did without fail. Before on the versions before this everything worked just fine no issues. Apple get with the program and fix these issues we are having please. Thanks and hope they get it fixed and straightened out quick!!!
Well, here is the results of my Diagnostic Test of the phone when plugged into the computer. Maybe with this someone would be able to see something that might need looking into, if so please let me know. Thanks so much in advance. I have not tried going back to a older version of iTunes as I am just gonna wait and see if Apple can correct it, hopefully they can. It seems as if on update they left something out to make iTunes, and Syncing not working properly.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0037AA9C0E1D0A58
Current user is an administrator.
The current local date and time is 2012-04-02 10:38:23.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3300 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: Removed by me
Description: Removed by me
IP Address: Removed by me
Subnet Mask: Removed by me
Default Gateway: Removed by me
DHCP Enabled: Removed by me
DHCP Server: Removed by me
Lease Obtained: Removed by me
Lease Expires: Removed by me
DNS Servers: Removed by me
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-02 10:37:10.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ATAPI iHAS422 8, Rev 4L11
Drive is empty. Did not have CD/DVD in it for the test of it.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
LSI 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Joey’s iPhone, iPhone 4S running firmware version 5.1
Serial Number: Removed by me
**** Device Sync Tests ****
Sync tests completed successfully. -
Network issue with initial connections on Hyper-V
This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Issue with LDAP Connection becuase of Network issue
Hello All,
We have some network issues going on which is causing the NIC (Network interface card) to failover to another NIC. Due to this failover SUN access manager's LDAP connection pool fills up and we see errors in logs "Directory is down". We have to restart the Access manager to resolve this issue which refresh the connection pool of LDAP.
Now we have set the setting as recommended in admin guide/tuning guide. Like
1. Set event connection idle timeout to less that firewall or loadbalancer idle timeout value.
2. event connection retry count and interval on perticular error code.
Despite of above settings its not working out. Is there other way to get all the stale connections back to the LDAP pool without restarting the server?
Or something which handles the network failover or failback?
Regards
Chetan KulshresthaThe user search name is the value you should be looking at in the LDAP attributes, that's the one that it will send to LDAP on a logon attempt. If you changed this value after mapping a group, I'm not sure but you may have to remap the group to get the change.
So on the LDAP side verify the user search attribute = the username you expect to login with (i.e. cn, samaccountname, uid, etc)
Regards,
Tim -
Im an owner of an Iphone 3gs.
When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it would show me Connect To Itunes screen, I tried connecting but nothing happens and if I just leave it as it is it will just keep on restarting and showing the same screen sometimes I might get lucky and the phone will start working again but No Service and if I turn on my 3G for the times Im outdoors it will just restart again so 3G is also another problem I have got. Today I decided to take it to an Apple Store, the guy restored it and now what happens is that it switches on and is showing me the connect to Itunes message but with black backround and i cant do anything it keeps on restarting and showing the same thing. Please if there is anyone that would like to spend some time with me to help me out, he would be more than Welcome.
Im located in South AfricaiOS: Device not recognized in iTunes for Mac OS X
-
Unable to connect to TC since 7.5.2 update - network issue
Can anyone help?!
Yesterday I updated to the latest firmware and since then have not been able to connect to my time capsule.
Setup:
Cisco Linksys WAG320N router connected to the outside world
Cisco sits at 10.0.0.1 and assigns IP addresses via DHCP to any connecting clients on wireless
Connected via LAN is the TC, this has wireless disabled and until yesterday was working just fine, doing regular backups and print server duties
Now though I cannot receive IP via DHCP, the subnet mask is always set to 255.255.0.0 (my network is set to 255.255.255.0) and only 'receives' IP : 169.254.250.66 no idea from where
I can try to manually assign an IP within the correct range, and also set the subnet to the correct range, but nothing on the network can connect to it.
I have tried everything I can think of and have looked at multiple forums for answers but cannot get it working.
Any help appreciated!This is now resolved
Answer: reset and reconfigure, this time allow it to connect wirelessly to the network (ignore ethernet connection)
another moan: called Apple support and was told that I was not eligible for telephone support. I argued why I wouldn't be as a firmware update had caused my issue. the response was: "firmware and software updates are optional"
what do you think is the first thing you are asked when you call? Yes thats right..."what firmware version are you using?" ....and if you are not using the latest you are told to go and update...... hardly optional then!! -
Issue connecting touchpad to WPA2 PSK network
I have an issue connecting my touchpad to any WPA2 PSK networks. The SSID is broadcast and other devices can connect but the touchpad errors with "unable to associate" even though I typed in the correct password. Any help is appreciated, and no I do not want to change the network settings since this device is supposed to utilize WPA2.
Post relates to: HP TouchPad (WiFi)Hi Terabyte,
I don't mean to take over deltatuks thread but as we are having the same issue i'll continue!
I have power cycled the router and turned off/on the wireless on the device. I've just ran the tests and they all passed! including wifi! lol.
Still not working though.
This is very strange -
JDBC Connection Jobs Continue to Run After Network Issues
We've got 7.0 SP13 installed in our DEV and QAS environments. We connect to iSeries DB2 tables using a JDBC connection. We recently experienced a network issue that shutdown PI. Problem is that the system jobs used to connect to the iSeries are still running and still requiring more and more temporary storage. We've rebooted our PI boxes but still these connection jobs continue to run and gobble up more memory.
Are we missing something in our configuration of these communication channels that will force these jobs to end???
Thanks in advance,
ChadiSeries is on a separate server altogether. JDBC connection to the iSeries is setup through the communication channel.
Problem is that the network issue that disconnected PI from the iSeries left these communication jobs running on the iSeries.
Rebooting PI only created MORE of these communication jobs.
Thanks for the reply VJ, but I don't believe the poll interval would help me in this case.
Chad -
Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?
I sometimes experience the same issue. But not only in 6.1 but also in previous versions
-
4S Verizon Network / Internet Connectivity Issues?
I have been having problems with what appears to be Verizon Network/Internet Connectivity issues. I am located in northern Colorado, using an iPhone 4S with a Mophie Air battery backup/case.
I am in a solid 4G area (even though the phone is 3G) and I have not had any problems with any connection issues, until last night. I still see three bars of 3G service on the phone indicator area...so it is decieving.
I can still recieve emails, text messages, and phone calls, but nothing that uses the internet will work. All apps seem to try to open and try to update, but the whizzy-wheel indicator just sits and spins until I get a "Network Error" message or a time out error of some kind. Most error pop-ups are saying to check the internet settings and try again. Ugh!
Also, since it seems to be trying to recognize the network all the time (even when all tasks are killed and nothing should be running), my battery is going down MUCH faster today! I took it off of the charger at 7am and it was down to 20% battery in only 4 hours! Then I turned on the battery backup, and it is quickly using that up too! At this rate my phone will be completely DEAD by the time I leave work today, and I haven't even used it for anything all day (except to try to connect to the web a few times - testing)!
I have tried the following so far to try to regain internet through the Verizon network, to no avail:
checked for software updates...phone was up to date with iOS 6.0.1
checked my firmware version (it is 3.0.04)
killed all background/running apps (with the home button double-click/hold icon/end)
"reset" my phone via a couple of methods (both the regular power off option and the force-power off option).
*228, option 2 (to reset Roaming)
cleared all data cache areas/cookies/etc.
Cellular data is set to "On"; Roaming is set to "On" for all options;
I have a 64GB device (57.3 usable capacity) of which I still show 46.2 available.
WiFi is set to "Off" (although I can use WiFi at home with no problem if I need to, but I shouldn't have to!)
Airplane Mode is set to "Off"; Restrictions are set to "Off"; Bluetooth is set to "Off"
Basically, there is NO REASON my phone should be having connection issues!
PLEASE HELP?!!I tried everything you did and more, i thought i had it working, but i got a voicemail today and when i went to open it earlier it just has the wheel loading forever and then says it cant onnect to voicemail. the searching does make it wear down the battery faster as well. i can get calls, texts etc, but i cant help but think there are a few bugs with the ios 6.01 software
-
Networking issue between 2 machines using 1 network connection
i have 2 machines - one is a mac pro running 10.5 the other a much older g4 running 10.4
i have one network connection into my room which is connected into 1 of the 2 network ports on the back of the mac pro.
this connects to the internet fine
from the other network port on the mac pro i run a cable to the g4.
the 2 machines see each other on the network and connect with each other fine . . however the g4 is unable to connect to the internet.... what have i done wrong?
what are the settings i need to do on either machine to allow both to connect to internet via the one connection?Did you turn on "Internet Sharing" in the "Sharing" system preference on the Mac Pro?
-
Cannot Print book from iphoto (network issue)
I cannot get a book to print from iphoto or access itunes music store through my school network. My school has a PC network, I am the only teacher to use macs in my classroom. I can access the music store through XP on parallels so I know the network connection is good. I believe the problem is a network setting either on my macbook or in our server. Our Tech cannot identify the problem. I just updated all applications to the latest versions.
Bill:
Welcome to the Apple Discussions. That sound more that a networking issue that should be posted in the Tiger Getting Online & Networking forum. There will be users there that should be able to address your problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. -
New Airport Network - issues with some specific features
Hello,
I have just changed my wifi system for an Airport Network, with one AirPort Extreme and 2 AirPort Express. The goal was to extend the wifi network to the entire house. Everything is fine, all my computers are able to connect to the network and are able to access the internet. The AirPort Network is connected to the internet with the PPPoE procedure.
The issue is very specific here.
1. I use Outlook 2007 to handle my e-mails. Since I have shifted to the AirPort Network, Outlook is not able to connect to pop server anymore for 4 of my 5 accounts. Hotmail (pop) is functionning alright but Gmail is blocked !
2. Windows Update is also unable to connect to the appropriate server.
Maybe there is more but it's all I have noticed so far. I have not changed a single parameter by myself on my computers and both are affected the same way.
I first thought it was a firewall issue but disabling my software firewall (Bullguard) did not change anything. Vista Firewall is not active. Maybe is it the internal firewall of the AirPort Extreme ? But that would not explain why Outlook can send messages (smtp works fine).
Any idea or similar experience ? Thank you in advance.
Best regards,
AdGMaybe my problem is just bad luck ! I might have shifted to my new network
the wrong day. One day earlier, I would not have seen any difficulty... if this is it.
Quakes slow cyber connections
By Zhu Shenshen | 2009-8-18 | NEWSPAPER EDITION
SHANGHAI'S international Internet connections slowed significantly yesterday after earthquakes rocked Taiwan and southern Japan. It was unclear last night how long repairs might take. Millions of Chinese Netizens were unable to connect to overseas Websites or use popular online chat tools yesterday afternoon.
About 15 million MSN instant message users in Shanghai and other parts of China were affected as the main servers are in the United States. Connections to most overseas Websites including those run by Yahoo and the New York Times were also clogged.
The chain of events that led to the service disruption had its origin in Typhoon Morakot, which struck Taiwan on August 7 and led to a later breakdown in an undersea telecommunications cable system.
Local Internet traffic was not influenced because transmissions were routed to a backup channel. But that cable failed yesterday near Busan, South Korea, apparently the victim of the earthquakes, according to China Unicom.
The failure affected Asian communications to the US and Europe.
The epicenter of the first quake, which struck at 8:05am yesterday, was about 188 kilometers southeast of Hualien on Taiwan's east coast at a depth of 11km, the island's weather bureau said. The US Geological Survey put the magnitude at 6.7.
The second quake, which was centered close to the first at a depth of 20km and struck at 6:10pm, measured 6.1, the Taiwan weather bureau said. It was also felt in Japan's Ishigaki Island.
"We've sent a team to repair the broken cable, but we can't give a detailed timetable for when it will be completed," said Song Guixiang, a public relations official for China Telecom.
The schedule will depend heavily on weather conditions, Song said.
Repairs are handled by a team comprising the carriers that use the cable.
In most cases it takes one to two months to fully repair damaged undersea cables. In the meantime, telecom operators will try to reroute traffic to operating cables and satellite systems.
Domestic Internet connections and international call services were normal yesterday, the carriers said. -
How to resolve network issue or dns to access web page on snow leopard server?
I have my network setup like as follows:
internet > router 1 > ethernet ports > switch > router 2
I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
Is there a problem with my network setup or maybe because I changed the name to newservername.local?@Jeff and @Camelot,
I think it is a DNS issue. I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
1. Stop DNS Service in Server Admin
2. Close Server Admin
3. Obtain 10.6 DNS Default files (below)
4. Overwrite the DNS files with DNS Default files:
/etc/dns/loggingOptions.conf.apple
/etc/dns/options.conf.apple
/etc/dns/publicView.conf.apple
/var/named/named.ca/etc/named.conf
/var/named/named.local
/var/named/localhost.zone
5. Restart your server
All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup. There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue. -
Networking Issues after Upgrading to Windows 8.1
I have a Windows 8 desktop PC that is working fine with my network. I can browse the Internet fine using all major browsers etc. After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error. I normally have to refresh 2-3 times to get a new page to load, sometimes even more. Everything works
fine from a laptop connected at the same time so it isn't an network issue with my provider.
I thought this might be a driver issue with the two on-board Marvell wired network adapters. I wasn't able to rollback the driver to older versions I found on the Internet. I then purchased another network card, Intel Desktop gigabit and the
issue still persists with that adapter. I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled. I tried a new network cable and no luck either. I also tried resetting the IP stack using
the various netsh commands.
After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store. I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
some of the recent guides that are available. That all worked but it didn't fix the networking issues.
I re-installed Windows 8.0 and the networking is now fixed and back to working normal again. I'd like to try again but I think I will have the same problems. I can't imagine why this would be a driver issue as I tried 3 different network adapters
and two installs of Windows 8.1. Any ideas what would be the cause of the Windows 8.1 issue?HI,
Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
the performance of win8.1.
Please also test this issue in safe mode with networking.
Please refer to:
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
I’d like to share the following article with you:
Wired and wireless network problems
http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
The issue occurs in safe mode as well under Windows 8.1. The motherboard is an Asus P5B Premium, however it works on Windows 8. How would I update the chipset when booted into Windows 8.1? In Device Manager it wasn't allowing me to update
the network drivers as they were newer versions already installed.
Edit: I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.4.0.1026 and the issue still occurs. I am also running the latest BIOS that is available.
Maybe you are looking for
-
LR CC downloaded but doesn't open
I downloaded the new LR CC from my Creative Cloud desktop application and when I click on the LR icon it doesn't open. Nothing happens. No error message. I am running Windows 7.
-
I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto. Is there any way to see my print order history and reorder the same book for print ?
-
How to customize the *Search Help ID* in selecion parameters of FBL5N?
Hi All, I'd like to know if is possible to customize the Search Help ID in the selecion parameters of FBL5N Thanks for Your Help G.
-
Help to get from video to sequence (newbie - Print person learning video)
I have .vob video files I am bringing into iSquint and converting to .mp4. I then bring that into MPEG Streamclip and have tried many different conversions. I bring them into FCE HD 3.5.1. The video pane plays the file, but when I drag & drop the fil
-
Can anyone help me? I go into the video app on my ipad to watch tv shows and all I am getting is a black screen. I can't even choose other shows - it is like frozen. I have shut down my Ipad twice and it isn't resolving the issue. Any help would