Network lagging for printing and classic

I have a weird problem. I just upgraded an iMac tray-load 333Mhz 320mb ram to OS 10.3.9 from OS 9.2.2 and now when I go to print it takes up to 20 mins per page. Also when running a filemaker database from a mac server in Classic the network lag makes the database almost unuseable. I know it's not the printer because it printer (HP Laserjet 2200D) as it works just fine with 3 other iMac computers on the same network. The database also works just fine on the other 3 computers. Listing files on other computers via file-sharing is also sluggish (explains the database slowness). I have tried swapping the network cables and hooking up to a different hub. I thought it might just be the ethernet card going out but internet browsing is plenty fast (tested at DSL reports.com)

Just a thought, Depending on a couple of things, If you Installed from scratch the HP Printer Set-up utility or you are trying to carry it over from 9.2 I find it best to start from scratch that includes going to HP's site and download the latest updates and drivers for your Operating System and Printer. If they download to your desktop be sure you drag them to the Applicatins and Hp Folder before you double click and launch them if they do not go there automaticlly.
Cheers Don

Similar Messages

AE Setup for printer and Airtunes ONLY?

If I set up a wireless network on my AE for printing and Airtunes, but my laptop accesses the internet via ethernet, does the AE allow access to that connection backwards through the laptop? (I don't want it to).

dasharst, Welcome to the discussion area!
Yes that is possible.
If your Linksys is a wireless router, simply configure the AirPort Express (AX) to join the wireless network created by the Linksys.
If your Linksys isn't wireless, simply connect the AX via Ethernet to one of the Linksys LAN ports. Configure the AX to act as a bridge (not sharing a single IP address).

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

I want to create a document in Illustrator that i can use for Print and Web - using 2 different colourspaces.

Is it possible to do this? I need to create a document so that I can export as a high quality CMYK for print and export the same file as RGB jpeg / pdf for web and email use. Do I have to create the document with 2 different colourspaces, or can I change / convert the colourspace after I have created and finished the document? or is there some simple way to select an RGB / CMYK option when saving/exporting?
look forward to your reply!
Tom

Tom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller.

InCopy/Indesign workflow for printed and folio mags?

We have a printed magazine that we also produce as folios for a DPS app. We produce the mag by using InCopy for text within the InDesign workflow. No problems there.
When finished (all edits completed) we produce the folio files but adding in all the links to twitter handles, URL's etc is proving tedious and timeconsuming for the editors and the designer. The editors (who use the print files and InCopy) produce a list in excel of the additions - they reference columns and paragraphs - which we don't use in the folio version. The designer then finds the spot after a lot of searching and then copies and pastes. All very tedious and a backward step in workflow.
Is there a way to include the "links" in an InCopy file that doesn't appear on the print PDF's yet apply correctly in the folios?

Use conditional text.
All interactive elements should be inline objects or simple hyperlinks that are tagged with a condition, then either showing or hidden depending on the article. Hide the interactive content when you create the PDF for print, and show the condition when adding or updating the article.
Anything you want to show/hide has to be part of a story — so text, inline objects, and anchored objects can all be used this way.
InCopy can see and apply conditional text, but cannot edit DPS-centric content such as an anchored MSO.
As always, using matching versions of ID/IC is important.

Firewall Rules for Printing and Scanning through Windows Firewall

Hello,
I am having trouble determining the Ports, Programs, and Services required for printing and scanning with my AIO.
I am using Windows Firewall in Windows 7, and am only allowing certain rules in and out.
I know the firewall is the problem, for when I disable it, everything works fine.
Which rules are required for printing and scanning through the firewall?

4th Bump,
Is there anyone who can help me with this?
As I said before, other printer manufacturers such as Lexmark and Brother provide this exact information.
Why doesn't hp have a document for this? Does everyone just disable their firewall or open every port?

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Is it possible to network a AIO Printer and use the Scanner and Fax on all computers.

I have a small network on a Peer to Peer. I have a non network printer. HP Deskjet 3050. Currently the printer and applications for Fax and Scan are installed onto two workstations. One computer has the printer directly connected via the USB. This system is sharing the printer on the network as a host.
The other computers are printing from the share without error but I cannot scan or fax with the "client" workstations. I receive an error indicating the printer is not connected. My question is: Is there any possible way to share the Fax/scan feature throughout the entire network?
I thought of purchasing a Network "Print-Server" but have heard they don't work and I need to buy a "Network Printer".
Any help and advice would be greatly appreciated.
Thanks!

I don't think there is such thing as scan sharing in Windows.
Why not just buy a wireless printer? I'd recommend that way more than a wireless print server (which don't support scanning, only printing - as far as I know).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Extended network setup with printer and airport disk

The network I want looks like this: The modem plugs into Airport Express using ethernet. Audio plugs in here to go to the stereo for music. Then the signal is sent wirelessly to an Airport Extreme in the other room, which has a printer and a hard drive connected to it.
I can't get the Extreme to stop flashing yellow. I tried extending the network created by the Express. I tried a WDS network with Express as main and Extreme as remote. Same network name, different network names, factory resets...I seem to be at a loss. I had an older "Snow" type Airport and I had the printer working on it (though it didn't support hard drives). I can't seem to duplicate the steps I took when I set up that network.
Thank you for any help you may be able to offer.

Tim,
It would help to know which AirPort Extreme, 802.11b/g or n, and Fast Ethernet versus Gigabit, and Express (b/g or n) devices you have.
Also, if you have any of the newer 802.11n AirPort devices, make sure that you update the firmware and AirPort Utility software.
If you're trying to setup a WDS, that's for 802.11g and if you're trying to "extend" a network, that for 802.11n.
Hope this helps.

HP Instructions for Printing and Scanning Under Snow Leopard

HP has posted instructions for Snow Leopard users for printing, faxing, and scanning on HP printers.
While the scan button (and installed HP printer management software) may no longer work on the printer, you can still scan if you go through the Preview or Image Capture programs on your Mac to access the scanner.
I tried it on my HP Officejet Pro 8500 wireless printer that was unable to scan after upgrading to Snow Leopard, and it worked.
HP has posted the printer instructions for Snow Leopard at: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
Hope this helps some of you. It worked for me.

You can download VueScan as a trial without paying for it unless you want to.
As for enabling scanning with Image Capture you need the proper driver. As a start I would ask HP's tech support if they can help you get it working. Apple does not write any printer or scanner drivers. They are provided by HP or other printer manufacturers. Apple packages them for distribution with OS X. It's quite possible that the current scanner driver for your model isn't compatible with SL.
If you understand modern technology then you have to appreciate the fact that most things become obsolete within months. This is certainly true of computers and their peripherals. Software developers cannot keep up the pace with the hardware. A two year old printer has been obsolete for more than a year already. Unless HP still sells and manufactures that model, they tend to lose interest with them. SL only arrived in October 2009 which is after your model was released. So HP needed to provide compatible drivers. If they have then perhaps the problem with yours is related to something else, but I don't know what that would be beyond completely uninstalling all the HP software then letting the OS figure out what to install. SL automatically discovered both my printer and scanner, then installed the drivers for each.

PSD Colour Preference & icc profile for Print and Web projects?

Using the same Photoshop files for Web- and (4c) printed media projects
i wonder if these settings are suitable to enable a good range
for both -
may you please let me know ?
i look forward to any feedback,
thanks a lot in advance!
---- please visit
http://img35.imageshack.us/f/psdwebprint.jpg/
http://img35.imageshack.us/f/psdwebprint.jpg/for a screenshot of these settings ---
1 - PSD PREFERENCE SETTINGS
... via
edit / colour settings / settings :
WORKING SPACES:
RGB - ECi rgb
CMYK - Coated FOGRA39 (OR Iso Coated V2 (ECI))
Gray - Gamma 2.2
Spot - Dot Gain 15%
COLOR MANAGEMENT POLICIES
RGB, CMYK, Gray - Preserve embedded Profiles
Profile Mismatch - checked/active Ask when Opening, checked/active Ask when Pasting
Profile Mismatch - checked/active Ask when Opening
CONVERSION OPTIONS
Engine - Adobe (ACE)
Intent - Relative Colormetric
checked/active Use Black Point ...
checked/active Use Dither ...
checked/active Compensate for scene ...
ADVANCED CONTROLS
unchecked/ Not active Desaturate ... 20%
unchecked/ Not active Blend RGB ... 1.00%
2 - FILE SETTINGS/PROFILE TAGGING
... via
edit / Assign Profile
PROFILE TAGGING FOR WEB
... ... Assign SRgb .ICC Profile
PROFILE TAGGING FOR PRINT
... ... Assign Coated FOGRA39 (OR Iso Coated V2 (ECI)) .ICC Profile

You might want to take a look at Deke McClelland'ssuggestion. Here's a link:
http://www.youtube.com/watch?v=0A1rDNkgMF8

Which Web Templates for printing and broadcasting

Hello,
we are running NW2004S SP10 with the Portal. We are using the web template 0AnalysisPattern and within this Web Template is a button called Send (for Broadcasting) and another called Print Version (for generating a PDF-Document which can be saved and or printed). This all works from a technical point of view good.
My question is now how I can change the layout of the PDF-File of the broadcasting PDF and also for the Print Version PDF? I do not know which Web Templates has to be changed. Could anybody please help me and give me this two Web Template names. Normally it should be possible to change within this templates the layout of the generated PDF-File, or am I wrong? I am very confused at the moment and need urgent help.
Thanks in advance for all help and
kind regards
Boris

The big answer is one you wont like, I suspect, which is that it takes TIME to get to understand the way 0ANALYSIS_PATTERN works, and then to progress to understand how to change it. That process took me several weeks, I started by documenting how the different parts work, I can let you have this document if you like, that will save you about a week.
Moving on from that, specifically you need to understand how to access the EXPORT command from the Exel and PDF buttons, then you can see the Web TEmplate that is used to control the output. You know, I could tell you in detail (and if you search SDN you will find more detailed answers to your question) but there really is no short cut to understanding how it all works.
Good luck!
Patrick

How to Give an Image for Print and Not Web

So, I have designed a logo for a web site and the site owner wants it for a business card and letterhead. Saving an image for web is easy and I understand all that but how do I prepare a file for a printer? I'm guessing this is just nipping in to the local print shop on the high street.
Sorry for the basic question and I'd be as happy with a link to a tutorial as with the answer!
Thanks
Martin

Saving an image for web is easy...
...Which is why your workflow is backward. Design for print first; repurpose for web. Not the other way 'round.
Proper advice on preparing the artwork for press is dependent upon specifics of the artwork and the printing parameters. You haven't provided any specifics at all. So your question amounts to asking someone to write you a manual on how to prepare artwork for presswork in an online forum post.
Do a Google search for "preparing artwork for offset printing" or some such.
JET

Which Mac Pro for print and which for web

My department is going to be purchasing new computers in the next month. I want to make an informed decision on which ones to buy.
We have both print and web designers. All will be getting new computers. However, I think that print and web probably have different technical needs.
So, of the three available: Quad-Core, 8-Core and 12-Core...which is best for which medium?

You could get along fine with an iMac.
You could wait and be forced to use Lion compliant apps
Do you need heavy grapic cabability you probably want 24GB RAM, not 8-12 cores but fastest single cpu available. Or even stock 4-core 2.8 (you don't want more and slower though like 2.4 or 2.6 or even 2.93GHz models).
Mac Performance Guide Reviews

Network lagging for printing and classic

Similar Messages

Maybe you are looking for