Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC
The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
The registry still shows a Profile with the correct PROFILENAME in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
but that name does not show up in the Network List Manager Policies inside Local Security Policy.
The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
is related to this issue because of firewall restrictions.
The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
Any Help is appreciated,
CrazyDog
Hi,
Based on my research,
Network Location Awareness (NLA) service expects to be able to enumerate the
domain’s forest name to choose the right network profile for the connection. The service does this by calling
DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
removed. In addition, please do not use loopback IP address.
Here are some articles below I suggest you refer to:
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Network Location Awareness
http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
Complete Step by Step to Remove an Orphaned Domain controller
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
Best Regards.
Amy
Similar Messages
-
Bpel console not showing domain name
Hi
i have installed a new jdev 10.1.3.1 and also have 10.1.2. first version is working fine examples but bpel console is not showing domain name in 10.1.2.
pls anyone can tell me what may be the problem.Is it bcoz of two version in same machine.?? Its urgent help out............this is understandable - at per default we use oracle lite - which only allows ONE installation on a windows system ..
to run both in paralell you have to install a db and create the 2 schemas (10.1.2.0.2 and 10.1.3.1) - I posted a blog note on this ..
http://clemensblog.blogspot.com/2006/04/oracle-bpel-xe-part-2.html
hth clemens -
Client installation is not successful & not showing activity in SCCM Server 2012
Environment : SCCM Server 2012 Configured successfull and installed clients using client push method , successfully Completed . I have seen Active, And push software to corresponding clients . installed successfully
We have internal & external networks in our environment . Internal network in data center , the sccm server is also in data center . All client systems is getting software's from sccm in internal network ( done successful) .
i have opened the ports in firewall 135,139,80,443,445, etc (TCP,UDP)
When iam trying to push the client from SCCM server to external network client system. it is not installing the Ccm setup ,
not showing "Active" in SCCM server .
I have added a Account in Client push , Same account i added in Client system Administrator group .
Info : All systems in Device collection
please updated the suggestions, to solve this issue .
Thanks in advanceClient push requires more than just those handful of ports as it uses RPC and SMB to push the initial required files -- thus, you need to open the dynamic high ports required for RPC.
You can easily see this activity in the ccm.log.If you are unable/unwilling to open the RPC high ports, then you should choose an alertnate client install method.
Jason | http://blog.configmgrftw.com -
Rename forest domain name windows server 2012 R2
I have single DC windows server 2012 R2 ex:abc.local i want to change forest domain name to ab.local?
Hello,
is that an already running domain or is the server just installed?
If the latter demote and promote with the new name again.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??
If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed. -
Adding shared printers? Network printer not showing up in list
I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.
Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall. -
Can not add domain name Error Protected word / inappropriate language
Can not add domain name Error Protected word / inappropriate language
Provide your Domain name :
pragatiassociates.com
Nature of Services provided: It located in India, Punjab. Its a new firm which will be focus on supplying products to Educational Institutes in and around Punjab
Problem: While trying to register domain on domains.live.com it gives error that it contains a protected word or inappropriate language.
The website is first phase version page has been hosted. Domain was purchased on 1-Mar-2014. Please help on priority as I need the mail solutions at the earliest.
Posted query on Microsoft answers no reply even after 4 days.
http://answers.microsoft.com/en-us/outlook_com/forum/oadmincenter-ocustomdom/can-not-add-domain-name-error-protected-word/1322a218-3ad2-451c-a774-ae700465f9c4?tm=1394076201617Saurav S --
Does your post have anything to do with Project Online, an enterprise project management application? If so, please elaborate. If not, please repost your question in a more relevant user forum. Hope this helps.
Dale A. Howard [MVP] -
After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?
I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself. -
Network shares not showing up in finder osx Lion
The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabledOpen Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist -
Wireless network connection not showing up in network connections
Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.Issue Resolved. I did not turn on the wireless switch.
-
Not showing Caller Name on E51
I have upgrade software but after that my phone not showing caller name on the screen.Before upgrading my phone was shwoing caller name when I received call. my all phone numbers are on SIM , can some body let me know how this will work or its setting.
The problem may be, that you have all your contacts on the SIM card and on the phone as well. Is that possible?
Duplicate matches for a specific phone number lead to not showing a phone number at all...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good. -
My iPhone 5 does not show caller name even though the number is saved with a name in contacts
My iPhone 5 does not show caller name even though the number is saved with a name in contacts
Contact your carrier. Caller ID is a carrier feature.
-
E52 not showing contacts name in inbox
Hi,
iam facing this problem of my e52 not showing contacts names in inbox.
Some of the contacts name are shown, those which was originally in my phone memory.
because i do a lot of trading, i constantly adds new numbers to my contacts from the sms they sent. But the main problem is here is even after i added their contact giving them names, the names doesnt show up in inbox, its still just numbers.
desperately need help for this. how can a business phone have this kind of problem?
Solved!
Go to Solution.This happens to me too when I store the number under two names, or the synchronization creates double entries, for example:
Two names:
1234 Anna
1234 Bea
Double entries
1234 Anna
1234 Anna
When the text message comes in, there's no name. But you can send a message either to Anna or Bea and the message outbox shows the proper name.
The solution is to delete one entry or merge the duplicate contacts.
Hope this helps. -
I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
any idea about this knowing that the older OS version didn't have an issue with this?
ThanksThis is the same problem I have. I thought it was my phone only, but now I realize it is a common thing. I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released. Will be waiting and good luck to us all.
-
have tried network reset but my network is not showing cnnot access internet.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
How to change default value of requested delivery date in va21 create quo
hi experts, My requirement is simple, to add one day to the default value of the Req deliv date under "General header data" in VA21. I modified MV45AFZZ (an include in SAPMV45A). I added this code: if sy-tcode eq 'VA21'. case screen-name. when
-
I want to go back to Version 4.3, I do not like the new version of Pages. this has messed up my whole day!
-
Animation effects not playing correctly in captivate 6 (playing last frame first?)
Hi there, Currently in captivate 6 I have a problem where when an item is coming in using an animation effect the image is flashing up very breifly, dissapearing then playing the animation as it should. it is almost as if it is playing the last split
-
Sleep issue on windows 8.1: pc doesn't wake once it's in sleep mode
I just bought a new pc, an acer aspire E1-572G, and today I installed windows 8.1. But now I am having a problem that seems to be general, from what I am readind. The problem is with the sleep mode, which once activated, I can't return to windows, un
-
How to get broken screen repaired?
What do I do to send my phone back to apple to get repaired (the screen is shattered)?